# Leonardo Alert Service Bulletin 109EP-188: No revision named

- Rights: © Leonardo S.p.A. Filed by the FAA in regulations.gov docket FAA-2025-0017, the docket of AD 2025-03-03. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Leonardo Alert Service Bulletin 109EP-188](https://openairdocs.org/service-documents/leonardo/109ep-188.md)
- Title as filed: Leonardo Helicopters Emergency ASB No. 109EP-188
- Pages: 12
- PDF: https://openairdocs.org/files/sha256/d8/06/d806bb16d96fa9c1e962cc98f3bef35fdb38257c0b6a527bc0785c2f58c2b7c6
- Page: https://openairdocs.org/service-documents/leonardo/109ep-188/file/d806bb16d96f

## Text

Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Pa ge 1 of 11 
N°  109EP-188 
DA TE:  November 27, 2024 
REV. :  / - December 22, 2023 
TITLE 
ATA 25 – EXTERNAL RESCUE HOIST CABLE ASSEMBLY BALL END INSPECTION 
REVISION LOG 
First Issue 
Leonardo S.p.A.
Via Giovanni Agusta, 520
21017 Cascina Costa di Samarate (VA) Italy
Tel.: +39 0331 229111 - Fax: +39 0331 229605/222595
An appropriate entry should be made in the aircraft log book upon accomplishment.
If ownership of aircraft has changed, please, forward to new owner.
EMERGENCY ALERT
SERVICE BULLETIN

### Page 2

S.B. N°109EP-188 EMERGENCY ALERT 
 DATE: November 27, 2024 
Page 2 of 11 REVISION: / 
1. PLANNING INFORMATION 
A. EFFECTIVITY 
NOTE 
Please refer to the Log Card of the rescue hoist assy to 
take the data required below. Refer to: 
 Section 1 for the manufacturing date; 
 Sections 2 and 3 for the repaired/overhauled 
operations details and the external rescue hoist 
cable assembly replacement details. 
Please refer also to EASA Form 1, FAA Form 8130-3 or 
any other equivalent Authorised Release Certificate 
document of the rescue hoist assy to take the 
information regarding the organization that performed 
the last repair or overhaul operation on the component 
(refer to block 4 of the document). 
All the following 600 lb rescue hoist assy as applic able: 
 P/N 109-0900-61-201 (Breeze Eastern P/N BL-20200-110); 
 P/N 109-0900-61-203 (Breeze Eastern P/N BL-20200-120), 
installed on A109E helicopters or kept in stock, in the following conditions: 
 manufactured by Breeze-Eastern before April 8th, 2024 and that have never 
replaced the external rescue hoist cable assembly since the delivery from 
Breeze Eastern; 
 repaired or overhauled by Breeze Eastern in Whippany (New Jersey) before 
April 8th, 2024 and that have never replaced the external rescue hoist cable 
assembly since the latest delivery from Breeze Eastern. 
B. COMPLIANCE 
Before the next rescue hoist operation. 
C. CONCURRENT REQUIREMENTS 
N.A. 
D. REASON 
This Service Bulletin is consequence of a quality escape from the rescue hoist assy 
supplier (Breeze Eastern), about the detection of a potential damage of the ball end

### Page 3

S.B. N°109EP-188 EMERGENCY ALERT 
DATE: November 27, 2024 
REVISION: / Page 3 of 11 
terminal fitting of the external rescue hoist cable assembly, which connects the external 
rescue hoist cable assembly and the hook assy. 
The damage has been caused by a testing tool used on the new and the repaired 
overhauled rescue hoist assemblies. That testing tool has been replaced on April 2024, 
but a batch of rescue hoist wire rope assemblies delivered from Breeze Eastern main 
manufacturing facility (in Whippany, New Jersey) may be affected. 
Leonardo Helicopters issued this Service Bulletin in order to perform a one-off visual 
inspection of the external rescue hoist cable assembly ball end and to replace the 
affected components (refer to Breeze Eastern SB MS20664C3). 
E. DESCRIPTION 
This Service Bulletin provides the necessary instructions to perform a detailed visual 
inspection of the ball end of the external rescue hoist cable assembly P/N BL6260 or 
P/N BL-6260 and to replace the external rescue hoist cable assembly in case of 
unserviceable conditions detection. 
F. APPROVAL 
The technical content of this Service Bulletin is approved under the authority of DOA 
nr. EASA.21.J.005. For helicopters registered under other Aviation Authorities, before 
applying the Service Bulletin, applicable Aviation Authority approval must be checked 
within Local Aviation Authority. 
EASA states mandatory compliance with inspections, modifications or technical 
directives and related time of compliance by means of relevant Airworthiness 
Directives. 
If an aircraft listed in the effectivity embodies a modification or repair not Leonardo 
Helicopters certified and affecting the content of this Service Bulletin, it is responsibility 
of the Owner/Operator to obtain a formal approval by Aviation Authority having 
jurisdiction on the aircraft, for any adaptation necessary before incorporation of the 
present Service Bulletin. 
G. MANPOWER 
To comply with this Service Bulletin, approximately two (2) MMH are deemed 
necessary (ONLY for the inspection procedure). 
MMH are based on hands-on time and can change with helicopter configuration, 
personnel and facilities available.

### Page 4

S.B. N°109EP-188 EMERGENCY ALERT 
 DATE: November 27, 2024 
Page 4 of 11 REVISION: / 
H. WEIGHT AND BALANCE 
N.A. 
I. REFERENCES 
I.1 PUBLICATIONS 
Following Paragraphs refer to MM: 
PARAGRAPH DESCRIPTION PART 
PAR01  00-20-1 Helicopter safety - 
PAR02  25-91 Rescue hoist installation      
(600 LB) 
- 
 
Following DM refer to CSPR: 
DATA MODULE DESCRIPTION PART 
DM01 CSRP-A-51-00-00-00A-030A-D  Common structural repair 
publication - Technical data 
- 
 
Refer also to Breeze Eastern SB MS20664C3. 
I.2 ACRONYMS & ABBREVIATIONS 
AMDI Aircraft Material Data Information 
AR As Required 
CSAM Customer Support Account Manager 
CSPR Common Structural Repair Publication 
DM Data Module 
DOA Design Organization Approval 
EASA European Union Aviation Safety Agency 
FAA Federal Aviation Administration 
IPC Illustrated Parts Catalog 
MEK Methyl-Ethyl-Ketone 
MM Maintenance Publication 
MMH Maintenance Man Hours 
MMIR Maintenance Malfunction Information Report 
N.A. Not Applicable 
P/N Part Number 
PTUM Pictorial Tools Usage Manual  
SB Service Bulletin 
S/N Serial Number

### Page 5

S.B. N°109EP-188 EMERGENCY ALERT 
DATE: November 27, 2024 
REVISION: / Page 5 of 11 
I.3 ANNEX 
N.A. 
J. PUBLICATIONS AFFECTED 
N.A. 
K. SOFTWARE ACCOMPLISHMENT SUMMARY 
N.A.

### Page 6

S.B. N°109EP-188 EMERGENCY ALERT 
 DATE: November 27, 2024 
Page 6 of 11 REVISION: / 
2. MATERIAL INFORMATION 
A. REQUIRED MATERIALS 
A.1 PARTS 
# P/N ALTERNATIVE P/N DESCRIPTION Q.TY LVL  NOTE LOG P/N 
1 109-0900-61  600 LB RESCUE HOIST ASSY REF .  - 
2 
BL6260 
or 
B-L6260 
 External rescue hoist cable assembly AR .. (1) - 
 
Refer also to IPC for the spares materials required to comply with the MM Paragrahs 
referenced in the accomplishment instructions. 
A.2 CONSUMABLES 
The following consumable materials, or equivalent, are necessary to accomplish 
this Service Bulletin: 
# SPEC./LH CODE NUMBER DESCRIPTION Q.TY NOTE PART 
3 ASTM D740, TYPE I /  Code No.999999999000007983 MEK (C005) AR (2) - 
4 Commercial Soft lint-free cloth (C011) AR (2) - 
 
Refer also to AMDI for the consumable materials required to comply with the MM 
Paragrahs referenced in the accomplishment instructions. 
A.3 LOGISTIC MATRIX 
N.A. 
NOTES 
(1) This item has to be ordered in q.ty 1 ONLY if the inspected one is unserviceable 
and it must be ordered directly to Breeze Eastern. Please refer to the Paragraph 
2.C Industry Support Information of this Service Bulletin. 
(2) Item to be procured as local supply. 
B. SPECIAL TOOLS 
The following special tools, or equivalent, are necessary to accomplish this Service 
Bulletin: 
# P/N DESCRIPTION Q.TY NOTE PART 
5 Commercial Light source (ZZ-00-00) 1 (B1) - 
6 Commercial Magnifying glass (10 power) (ZZ-00-00) 1 (B1) - 
 
Refer also to PTUM for the special tools required to comply with the MM Paragraghs 
referenced in the accomplishment instructions.

### Page 7

S.B. N°109EP-188 EMERGENCY ALERT 
DATE: November 27, 2024 
REVISION: / Page 7 of 11 
SPECIAL TOOLS NOTES 
 Item to be procured as local supply. 
C. INDUSTRY SUPPORT INFORMATION 
A replacement wire rope assy P/N BL6260 or P/N BL-6260 will be provided free of 
charge by Breeze Eastern upon Customer’s request to Breeze Eastern directly. 
Contact Breeze Eastern Customer Services below: 
Breeze-Eastern Corporation Phone Number (973) 602-1083, or (973) 602-1090 35 
Melanie Lane 1-800-929-1919 (Toll-Free US and Canada only) Whippany, New Jersey 
07981-1638 USA Fax Number (973) 739-9344 
E-Mail: customerservices@breeze-eastern.com 
Web Site: www.breeze-eastern.com 
As alternative, refer to the direct point of contact Alexander Pappas at the following 
mail: APappas@Breeze-Eastern.com. 
ONLY if Breeze Eastern reject the request, please contact your Leonardo Helicopter 
CSAM sending the Breeze Eastern communication and the documents requested 
below: 
 the Inspection Report Form in Figure 2 completed in every part; 
 a picture of the inspected area; 
 a copy of the relevant Log Card of the inspected 600 lb rescue hoist assy P/N 
109-0900-61-201 (Breeze Eastern P/N BL-20200-110) or P/N 109-0900-61-203 
(Breeze Eastern P/N BL-20200-120) as applicable; 
 a copy of the EASA Form 1, FAA Form 8130-3 or any other equivalent 
Authorised Release Certificate document of the inspected 600 lb rescue hoist 
assy. 
Only if confirmed by your Leonardo Helicopters’ CSAM, please Issue relevant MMIR 
form to your Warranty Administration Dpt. including the required documentation. 
If the required documentation is not be provided, the relevant MMIR will be rejected. 
Owners/operators who comply with the instructions of this Service Bulletin no later than 
the applicable date in the “Compliance” section will be eligible to receive required 
materials on free of charge basis, except for Consumable Materials and Special Tools. 
NOTE: Customers who fail to comply with the instructions in this Service Bulletin before 
the compliance date are not eligible for the aforementioned special policy.

### Page 8

S.B. N°109EP-188 EMERGENCY ALERT 
 DATE: November 27, 2024 
Page 8 of 11 REVISION: / 
3. ACCOMPLISHMENT INSTRUCTIONS 
GENERAL NOTE 
Place an identification tag on all components that are 
re-usable, including the attaching hardware that has 
been removed to gain access to the modification area 
and adequately protect them until their later re-use. 
1. In accordance with MM Paragraph 00-20-1, prepare the helicopter on ground for a safe 
maintenance. Disconnect the battery, all electrical power sources and/or the external 
power supply. 
NOTE 
To properly inspect the ball end of the external rescue 
hoist cable assembly, it is necessary to remove the 
hook assy. 
2. In accordance with the applicable steps of MM Par agraph 25-91, remove the hook assy 
from the external rescue hoist cable assembly. 
3. With reference to Figure 1, perform the detailed visual inspection of the external rescue 
hoist cable assembly ball end, as described in the following procedure: 
3.1 Using a soft lint-free cloth (C011) and the methyl-ethyl-ketone (MEK) (C005), clean 
the ball end of the external rescue hoist cable assembly. 
NOTE 
For type of damages refer to “Terms and definitions” 
Section of CSRP DM CSRP-A-51-00-00-00A-030A-D. 
NOTE 
Slight scratches on the ball end, due to the movement 
of the hook assy, are normal. 
3.2 With reference to Figure 1 Detail A, using a lig ht source and a magnifying glass 
(10 power), check for presence of gouging (of any dimension) in the highlighted 
area of the ball end of the external rescue hoist cable assembly. 
3.2.1 If the inspected area presents gouging, the external rescue hoist cable 
assembly is unserviceable, proceed as follows: 
3.2.1.1 Compile and send the Inspection Report Form in Figure 2. 
3.2.1.2 In accordance with the applicable steps of MM Paragraph 25-91, 
replace the external rescue hoist cable assembly P/N BL6260 or 
P/N BL-6260 with a serviceable one and proceed to step 4.

### Page 9

S.B. N°109EP-188 EMERGENCY ALERT 
DATE: November 27, 2024 
REVISION: / Page 9 of 11 
3.2.2 If the inspected area does not present gouging, the external rescue hoist 
cable assembly is serviceable. In accordance with the applicable steps 
of MM Paragraph 25-91, re-install the hook assy on the serviceable 
external rescue hoist cable assembly. 
4. Return the helicopter to flight configuration and record for compliance with this Service 
Bulletin on the helicopter logbook and on the relevant Log Card of the 600 lb rescue hoist 
assy P/N 109-0900-61-201 (Breeze Eastern P/N BL-20200-110) or P/N 109-0900-61-203 
(Breeze Eastern P/N BL-20200-120), as applicable. 
5. Gain access to My Communications section on Leonardo Customer Portal and compile 
the “Service - Technical Bulletin Application”. 
As an alternative, send the attached compliance form to the following mail box: 
 engineering.support.lhd@leonardo.com  
and (for North, Central and South America) also to: 
 AWPC.Engineering.Support@leonardocompany.us 
 
  Non cancellare mai questo segnalibro Non cancellare mai interruzione sezione 

### Page 10

Figure 1 
 S.B. N°109EP-188 EMERGENCY ALERT 
 DATE: November 27, 2024 
Page 10 of 11 REVISION: / 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
(1) For type of damages, refer to “Terms and definitions” Section of CSRP  
DM CSRP-A-51-00-00-00A-030A-D. 
(2) Slight scratches due to the movement of the hook assy are normal. 
 
 
 
 
 
 
  
UNSERVICEABLE 
DETAIL A 
AREA TO BE INSPECTED ON THE BALL END OF THE EXTERNAL 
RESCUE HOIST CABLE ASSEMBLY 
IF ANY GOUGING (OF ANY DIMENSION) IS PRESENT ON THE INSPECTED AREA OF 
THE BALL END OF THE EXTERNAL RESCUE HOIST CABLE ASSEMBLY, THE WIRE 
EXTERNAL RESCUE HOIST CABLE ASSEMBLY IS UNSERVICEABLE 
FOR REFERENCE ONLY 
SERVICEABLE

### Page 11

Figure 2 
S.B. N°109EP-188 EMERGENCY ALERT 
DATE: November 27, 2024 
REVISION: / Page 11 of 11 
 
SB 109EP-188 Rev. / – INSPECTION REPORT FORM 
DATE  
S/N HELICOPTER  
CUSTOMER  
600 LB RESCUE HOIST 
ASSY 
P/N S/N 
☐ 109-0900-61-201 (Breeze Eastern 
P/N BL-20200-110)  ☐ 109-0900-61-203 (Breeze Eastern 
P/N BL-20200-120) 
CUSTOMER  
PICTURES OF THE 
INSPECTED AREA 
(REF. TO FIGURE 1 
DETAIL A) 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
NOTES:

### Page 12

Remarks:
Information: 
SERVICE BULLETIN COMPLIANCE   FORM Date:
Number:
Revision:
Please send to the following address: 
Telephone:
Fax:
 B.T. Compliance Date:
 Customer Name and Address:
 Helicopter Model S/N Total Number Total Hours T.S.O.
LEONARDO S.p.A.
CUSTOMER SUPPORT & SERVICES - ITALY
PRODUCT SUPPORT ENGINEERING & LICENSES DEPT. 
Via  Giovanni Agusta, 520
21017  Cascina  Costa di Samarate (VA) - ITALY 
Tel.: +39 0331 225036  Fax: +39 0331 225988
We request your cooperation in filling this form,  in order to keep out statistical data relevant to aircraft configuration up-to-date. The form should be filled in all
its parts and sent to the above address or you can communicate the application also via Technical Bulletin Application Communication Section placed in 
Leonardo AW Customer Portal - MyCommunications Area. We thank you beforehand for the information given.

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
