# Leonardo Service Bulletin 169-032: Revision A

- Rights: © Leonardo S.p.A. Filed by the FAA in regulations.gov docket FAA-2018-0057; AD 2019-18-02 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Leonardo Service Bulletin 169-032](https://openairdocs.org/service-documents/leonardo/sb-169-032.md)
- Title as filed: Leonardo Helicopters ASB 169-032 Rev A
- Pages: 12
- PDF: https://openairdocs.org/files/sha256/ec/14/ec1428a56e241d8f4c77fa1476fde25c95ff770db1420016ff9782cbc1c3854b
- Page: https://openairdocs.org/service-documents/leonardo/sb-169-032/file/ec1428a56e24

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

N°  169-032
DA TE:  July 12, 2017 
REV. :  A - September 8, 2017 
Pa ge 1 of 11 
TITLE 
ATA 56 - COCKPIT DOORS AND CABIN EMERGENCY EXIT WINDOWS 
I
NSTALLATION. 
REVISION LOG 
Application of the initial issue (Rev. /) of this Service Bulletin is considered satisfactory to 
r
estore the airworthiness of the helicopter. 
Revision A is issued to: 
• Update paragraph 1.E
• Update paragraph 2.A
• Update paragraph 3
Revision bars in the margin identify changes. 
An appropriate entry should be made in the aircraft log book upon accomplishment.
If ownership of aircraft has changed, please, forward to new owner.
Leonardo S.p.A.
Via Giovanni Agusta, 520
21017 Cascina Costa di Samarate (VA) Italy
Tel.: +39 0331 229111 - Fax: +39 0331 229605/222595
ALERT
SERVICE BULLETIN

### Page 2

S.B. N°169-032 
 DATE: July 12, 2017 
Page 2 of 11 REVISION: A - September 8, 2017 
1. PLANNING INFORMATION 
A. EFFECTIVITY 
AW169 helicopters S/Ns 69007, 69009, 69011, 69012, 69013, 69014, 69015, 69016, 
69017, 69018, 69019, 69021, 69022, 69023, 69024, 69027, 69032, 69033, 69041, 
69045 and 69051. 
B. COMPLIANCE 
Within 70 flight hours or 6 months whichever occurs first from receipt of this Service 
Bulletin. 
C. CONCURRENT REQUIREMENTS 
N.A. 
D. REASON 
This Service Bulletin has been issued in order to provide all the necessary instruction 
on how to perform the replacement of the seal, the non-metallic channel and the 
handle of all the cockpit doors and cabin emergency exit windows. 
E. DESCRIPTION 
Leonardo Helicopter Division has developed the dedicated Service Bulletin to replace 
the seal, the non-metallic channel and the handle of the emergency exit windows 
before the scheduled discard time, in order to restore the correct installation of the 
emergency exit system. 
Steps 4 and 5 are NOT applicable to those helicopters on which the filler wedges and 
seals have been replaced (following the discard times DT56-01 and DT56-02 or for 
any other reasons) at least once since delivery. 
F. APPROVAL 
The technical content of this Service Bulletin is approved under the authority of DOA 
nr. EASA.21.J.005. For helicopters registered under other Aviation Authorities, before 
applying the Service Bulletin, applicable Aviation Authority approval must be checked 
within Leonardo Helicopters customer portal. 
E.A.S.A. states mandatory compliance with inspections, modifications or technical 
directives and related time of compliance by means of relevant Airworthiness 
Directives. 
If an aircraft listed in the effectivity embodies a modification or repair not LHD certified 
and affecting the content of this Service Bulletin, it is responsibility of the

### Page 3

S.B. N°169-032 
DATE: July 12, 2017 
REVISION: A - September 8, 2017 Page 3 of 11 
Owner/Operator to obtain a formal approval by Aviation Authority having jurisdiction on 
the aircraft, for any adaptation necessary before incorporation of the present Service 
Bulletin. 
G. MANPOWER 
To comply with this Service Bulletin twenty-four (24) Maintenance-Man-Hours (MMH) 
are deemed necessary. 
Maintenance-Man-Hours are based on hands-on time and can change with personnel 
and facilities available 
H. WEIGHT AND BALANCE 
N.A. 
I. REFERENCES 
1) PUBLICATIONS 
DATA MODULE DESCRIPTION PART 
DM01 69-A-00-20-00-00A-120A-A Helicopter on ground for a safe 
maintenance. 
N.A. 
DM02 69-A-56-31-07-00A-921A-A Seals and filler (Cockpit door 
window installation)-Replacement 
N.A. 
DM03 69-A-56-32-01-05A-921A-A Seals and filler (Passenger door 
window) - Replacement 
N.A. 
2) ACRONYMS 
DM Data Module 
MMH Maintenance-Man-Hours 
LH Left hand 
RH Right hand  
FWD Forward 
AFT After 
3) ANNEX 
N.A. 
J. PUBLICATIONS AFFECTED 
N.A. 
K. SOFTWARE ACCOMPLISHMENT SUMMARY 
N.A.

### Page 4

S.B. N°169-032 
 DATE: July 12, 2017 
Page 4 of 11 REVISION: A - September 8, 2017 
2. MATERIAL INFORMATION 
A. REQUIRED MATERIALS 
1) PARTS 
P/N DESCRIPTION Q.TY NOTE  
A417AF001WB2670 Nonmetallic channel LH/RH 
cockpit door 
REF (1)   
A417AG002WB2670 Seal LH/RH cockpit door REF (2)  
A417AF001WB2461 Nonmetallic channel LH/RH FWD 
passenger door 
REF (1)  
A417AG002WB2461 Seal LH/RH FWD passenger door REF (2)  
A417AF001WB2402 Nonmetallic channel LH/RH AFT 
passenger door 
REF (1)  
A417AG002WB2402 Seal LH/RH AFT passenger door REF (2)  
8G9500L00151 Internal emergency exit handle 6 (3)  
8G9500L00251 External emergency exit handle 6 (4)  
A180A022E21  Decal 6 (5)(6)  
AW003DE005E33B Decal 6 (5)(7)  
2) CONSUMABLES 
Spec./AW code number DESCRIPTION Q.TY NOTE PART 
A417AF001WB Filler wedge 35 m (8) N.A. 
A417AG002WB Seal 20 m (9)  N.A. 
P-D 680 Type II Code No. 
505405407 
Cleaning solvent Ardrox 
5503 (C010) 
AR Local 
Supply 
N.A. 
TT-I-735 Code No. 
531050445 
Isopropyl alcohol (C039) AR Local 
Supply 
N.A. 
MIL-T-23142 Code No. 
900001393 
Adhesive tape (C050) AR Local 
Supply 
N.A. 
MIL-B-131 Barrier material (C051) AR Local 
Supply 
N.A. 
A-A-3097 Class 2 Code No. 
999999999000001120  
Adhesive Cyanoacrylate 
(C122) 
AR Local 
Supply 
N.A. 
199-05-152, Type I, Class 2, 
Code No. 900002980 
Adhesive RTV 732 
(C126) 
AR Local 
Supply 
N.A. 
Commercial  Rapid polish (C216) AR Local 
Supply 
N.A.

### Page 5

S.B. N°169-032 
DATE: July 12, 2017 
REVISION: A - September 8, 2017 Page 5 of 11 
Spec./AW code number DESCRIPTION Q.TY NOTE PART 
MIL-T-11291 Code No. 
501664822 
Tape 425 (C258) AR Local 
Supply 
N.A. 
FHD Code No. 900002310 PTFE release agent 
(C415) 
AR Local 
Supply 
N.A. 
Code No. MD100075 Teflon adhesive tape 
(C416) 
AR Local 
Supply 
N.A. 
NOTE 
(1) These items will not be supplied. Rework the raw filler wedge supplied to obtain 
the P/N listed in the “required materials” table. The final numbers in the P/N is the 
final length in mm. 
(2)  These items will not be supplied. Rework the raw seal supplied to obtain the P/N 
listed in the “required materials” table. The final numbers in the P/N is the final 
length in mm. 
(3) Q.ty 4 emergency handles P/N 8G9500L00151 shall be provided if the helicopter 
is equipped with sliding passenger window kit P/N 6F5630F00411. 
(4) Q.ty 4 emergency handles P/N 8G9500L00251 shall be provided if the helicopter 
is equipped with sliding passenger window kit P/N 6F5630F00411. 
(5) For aircraft registered in non-EASA member states, local bilingual interior and 
exterior markings shall be adopted, if applicable, in compliance with the 
competent National Aviation Authority approved configuration. 
(6) Q.ty 4 decals P/N A180A022E21 shall be provided if the helicopter is equipped 
with sliding passenger window kit P/N 6F5630F00411. 
(7) Q.ty 4 decals P/N AW003DE005E33B shall be provided if the helicopter is 
equipped with sliding passenger window kit P/N 6F5630F00411. 
(8) Raw material to be reworked to obtain the required filler wedges as specified in 
the “compliance instructions” section. 
(9) Raw material to be reworked to obtain the required seals as specified in the 
“compliance instructions” section. 
B. SPECIAL TOOLS 
P/N DESCRIPTION Q.TY NOTE PART 
3G5605G00132 Windows installation kit 
(GF-34-00) 
1  N.A. 
C. INDUSTRY SUPPORT INFORMATION 
Owners/Operators who comply with the instructions of this Bulletin, no later than the 
applicable date in the “Compliance section” will be eligible to receive REQUIRED

### Page 6

S.B. N°169-032 
 DATE: July 12, 2017 
Page 6 of 11 REVISION: A - September 8, 2017 
MATERIALS on free of charge basis, except for Consumable Materials and Special 
Tools.  
NOTE: Customers who fail to comply with the instructions in this bulletin before the 
compliance date are not eligible for the aforementioned special policy.  
Please Issue relevant M.M.I.R. form ( (M)aintenance (M)alfunction (I)nformation 
(R)eport ) to your Warranty Administration Dpt.

### Page 7

S.B. N°169-032 
DATE: July 12, 2017 
REVISION: A - September 8, 2017 Page 7 of 11 
3. ACCOMPLISHMENT INSTRUCTIONS 
GENERAL NOTES 
a) Place an identification tag on all components that 
are re-usable, including the attaching hardware that 
has been removed to gain access to the 
modification area and adequately protect them until 
their later re-use. 
b) Let adhesive cure at room temperature for at least 
24 hours unless otherwise specified. 
c) All lengths are in mm. 
1. In accordance with AMP DM 69-A-00-20-00-00A-120A- A, prepare the helicopter on 
ground for a safe maintenance. Disconnect the battery, all electrical power sources 
and/or the external power supply. 
NOTE 
Perform step 2 only if the helicopter is NOT equipped 
with decals P/N A180A022E21 “1 PULL TAB TO 
REMOVE CORD 2 PUSH OUT WINDOW” in the 
internal side of the cockpit and cabin windows, 
otherwise skip to step 3. 
2. With reference to Figure 1 and Figure 2, remove t he n°6 already installed decals from 
the RH and LH passenger and cockpit doors and replace them with n°6 decals P/N 
A180A022E21 “1 PULL TAB TO REMOVE CORD 2 PUSH OUT WINDOW”. 
NOTE 
Perform step 3 only if the helicopter is NOT equipped 
with decals P/N AW003DE005E33B “EMERGENCY 
EXIT 1. PULL TAB TO REMOVE CORD 2. PUSH IN 
WINDOW” in the external side of the cockpit and cabin 
windows, otherwise skip to step 4. 
3. With reference to Figure 3, remove the n°6 alread y installed decals from the RH and LH 
passenger and cockpit doors and replace them with n°6 decals P/N AW003DE005E33B 
“EMERGENCY EXIT 1. PULL TAB TO REMOVE CORD 2. PUSH IN WINDOW”.

### Page 8

S.B. N°169-032 
 DATE: July 12, 2017 
Page 8 of 11 REVISION: A - September 8, 2017 
NOTE 
Steps 4 and 5 are NOT applicable to those helicopters 
on which the filler wedges and seals have been 
replaced (following the discard times DT56-01 and 
DT56-02 or for any other reasons) at least once since 
delivery. 
NOTE 
If helicopter is equipped with straps  
P/N A487A003A, pay attention to replace them with the 
emergency exit handles P/N 8G9500L00151 for the 
internal side and P/N 8G9500L00251 for the external 
side. 
CAUTION 
In the following steps 4 and 5, be careful during 
windows removal from their frames in order to avoid 
damages to the windows themselves. 
4. In accordance with AMP DM 69-A-56-31-07-00A-921A- A, replace the seals, the  
non-metallic channels and the emergency handles of the LH and RH cockpit door upper 
windows. 
NOTE 
Perform step 5 only on the LH and RH forward fixed 
passenger door windows if the helicopter is equipped 
with the sliding passenger window kit P/N 
6F5630F00411. 
5. In accordance with AMP DM 69-A-56-32-01-05A-921A- A, replace the seals, the  
non-metallic channels and the emergency handles of the LH and RH passenger door 
windows. 
6. Return the helicopter to flight configuration and record for compliance with this Service 
Bulletin on the helicopter logbook. 
7. Send the attached compliance form to the following mail box: 
 pse_aw169.mbx.aw@leonardocompany.com 
As an alternative, gain access to My Communications section on Leonardo WebPortal 
and compile the “Service Bulletin Application Communication”.

### Page 9 (OCR)

• LEONARDO
HELICOPTERS
i1 PULL RED STRAP TO REMOVE CORD  EWD
REMOVE:  A180A005E21 DECAL  2 PUSH OUT WINDOW"  VIEW B  RH SIDE SHOWN  LH SIDE OPPOSITE  PASSENGER DOOR  RH SIDE SHOWN  LH SIDE OPPOSITE
REMOVE:  RED STRAP AND  RELEVANT GASKET  "2 PUSH OUT WINDOTO REMOVE CORD
REMOVE:  A180A005E21 DECAL
VIEW A  RH SIDE SHOWN  LH SIDE OPPOSITE  DETAIL C  RH SIDE SHOWN  LH SIDE OPPOSITE
REMOVE:  RED STRAP AND  RELEVANT GASKET
REMOVE:  RED STRAP  A PULL BED STRAP TO REMOVE CORD  CREW DOOR  RH SIDE SHOWN  LH SIDE OPPOSITE
REMOVE:  2 PUSH OUT WINDOW"
VIEW D  RH SIDE SHOWN  LH SIDE OPPOSITE  DETAIL E  RH SIDE SHOWN  LH SIDE OPPOSITE  WAS
Figure 1
S.B. N°169-032
DATE: July 12, 2017
REVISION: A - September 8, 2017  Page 9 of 11

### Page 10 (OCR)

K LEONARDO
HELICOPTERS
1 PULL TAB TO REMOVE CORD  EWD
INSTALL:  A180A022E21 DECAL  2 PUSH OUT WINDOW"  PASSENGER DOOR
VIEW B  RH SIDE SHOWN  LH SIDE OPPOSITE  RH SIDE SHOWN  LE SIDE OPPOSITE
INSTALL:  8G9500L00151 INTERNAL  EMERGENCY EXIT HANDLE  INSTALL:  A180A022E21 DECAL  "1 PULL TAB TO REMOVE CORD  2 PUSH OUT WINDOW"
VIEW A  RH SIDE SHOWN  LH SIDE OPPOSITE  I PUSH OUT WINGOO  PUSH AND TURN - SLIDE  DETAIL C  RH SIDE SHOWN  LH SIDE OPPOSITE
INSTALL:  8G9500L00151 INTERNAL  EMERGENCY EXIT HANDLE
INSTALL:  A180A022E21 DECAL  "1 PULL TAB TO REMOVE CORD  2 PUSH OUT WINDOW"  CREW DOOR  RH SIDE SHOWN  LH SIDE OPPOSITE
INSTALL:  8G9500L00151 INTERNAL  EMERGENCY EXIT HANDLE  VIEW E  RH SIDE SHOWN  LH SIDE OPPOSITE  DETAIL D  RH SIDE SHOWN  LE SIDE OPPOSITE  BECOMES
Figure 2
S.B. N°169-032
DATE: July 12, 2017
Page 10 of 11  REVISION: A - September 8, 2017

### Page 11

Figure 3 
S.B. N°169-032 
DATE: July 12, 2017 
REVISION: A - September 8, 2017 Page 11 of 11 
SB169-032-003-01
DETAIL A
LH SIDE SHOWN
RH SIDE OPPOSITE
LH SIDE SHOWN
RH SIDE OPPOSITE
CREW DOOR
DETAIL A
REMOVE:
AW003DE001E33B DECAL (REF.)
INSTALL:
AW003DE005E33B DECAL
REMOVE:
A487A003A EMERGENCY STRAP (REF.)
INSTALL:
8G9500L00251 EXTERNAL
EMERGENCY EXIT HANDLE
LH SIDE SHOWN
RH SIDE OPPOSITE
PASSENGER DOOR
DETAIL B
DETAIL B
TYP 2 PLCS
LH SIDE SHOWN
RH SIDE OPPOSITE
REMOVE:
AW003DE001E33B DECAL (REF.)
INSTALL:
AW003DE005E33B DECAL
REMOVE:
A487A003A EMERGENCY STRAP (REF.)
INSTALL:
8G9500L00251 EXTERNAL
EMERGENCY EXIT HANDLE

### Page 12

Remarks:
Information: 
SERVICE BULLETIN COMPLIANCE   FORM Date:
Number:
Revision:
Please send to the following address: 
Telephone:
Fax:
 B.T. Compliance Date:
 Customer Name and Address:
 Helicopter Model S/N Total Number Total Hours T.S.O.
LEONARDO S.p.A.
CUSTOMER SUPPORT & SERVICES - ITALY
PRODUCT SUPPORT ENGINEERING & LICENSES DEPT. 
Via  Giovanni Agusta, 520
21017  Cascina  Costa di Samarate (VA) - ITALY 
Tel.: +39 0331 225036  Fax: +39 0331 225988
We request your cooperation in filling this form,  in order to keep out statistical data relevant to aircraft configuration up-to-date. The form should be filled in all
its parts and sent to the above address or you can communicate the application also via Technical Bulletin Application Communication Section placed in 
Leonardo AW Customer Portal - MyCommunications Area. We thank you beforehand for the information given.

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
