# Leonardo Alert Service Bulletin 169-082: Revision A

- Rights: © Leonardo S.p.A. Filed by the FAA in regulations.gov docket FAA-2021-0578, the docket of AD 2021-20-03. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Leonardo Alert Service Bulletin 169-082](https://openairdocs.org/service-documents/leonardo/sb-169-082.md)
- Title as filed: Leonardo Helicopters ASB 169-082 Rev A
- Pages: 8
- PDF: https://openairdocs.org/files/sha256/81/42/8142a73f4ce3fe7950b10927a333e2e39adad3f18d36b43b484d56f5500aaab6
- Page: https://openairdocs.org/service-documents/leonardo/sb-169-082/file/8142a73f4ce3

## Text

Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

N°  169-082 
DA TE:  July 31, 2018 
REV. :  A - A ugust 3, 2018 
Pa ge 1 of 7 
TITLE 
ATA 67 - COLLECTIVE FIXED FLIGHT CONTROL FRICTION CHECK 
REVISION LOG 
Helicopters already compliant with previous issues of this Service Bulletin do not need any 
a
dditional action. 
Revision A is issued in order to extend the effectivity also to the helicopters equipped with 
pilot collective stick assy P/N 6F6711A07831. 
Revision bars identify changes. 
An appropriate entry should be made in the aircraft log book upon accomplishment.
If ownership of aircraft has changed, please, forward to new owner.
Leonardo S.p.A.
Via Giovanni Agusta, 520
21017 Cascina Costa di Samarate (VA) Italy
Tel.: +39 0331 229111 - Fax: +39 0331 229605/222595
ALERT
SERVICE BULLETIN

### Page 2

S.B. N°169-082 ALERT 
 DATE: July 31, 2018 
Page 2 of 7 REVISION: A - August 3, 2018 
1. PLANNING INFORMATION 
A. EFFECTIVITY 
All AW169 helicopters equipped with pilot collective stick assy P/N 6F6711A07831 or 
P/N 6F6711A07832. 
B. COMPLIANCE 
NOTE 
Helicopters which "Aircraft Delivered Airworthy" date is 
earlier than the issuance date of this SB must comply 
with the Mandatory action. 
Recommended action is applicable after 
accomplishment of the Mandatory action, or as 
repetitive action for all the other helicopters. 
Mandatory action: within eighty (80) FH since first issue of this SB or within next 
inspection required in accordance with Maintenance Task 67-14 of AMPI Chapter V, 
whichever occurs first. 
Recommended action: after first accomplishment of the Mandatory action, or since 
entry into service as applicable, repeat every one hundred ten (110) FH. 
NOTE 
Maintenance Task 67-14 of AMPI Chapter V (currently 
prescribed every 800FH) will be updated accordingly in 
a next revision of the AMPI chapter V. 
C. CONCURRENT REQUIREMENTS 
N.A. 
D. REASON 
This Service Bulletin is issued in order to provide all the necessary instructions on how 
to perform the functional check of collective fixed flight control movement. 
E. DESCRIPTION 
On 26 July 2017, Leonardo Helicopters issued the SB 169-057 in response to a 
reported event characterized by undesired collective stick movement in flight. It 
required a one-time check of the collective fixed friction force of the flight control 
system. Another similar event has been recently recorded in service. For both 
instances it has been determined that the event was generated by a collective friction

### Page 3

S.B. N°169-082 ALERT 
DATE: July 31, 2018 
REVISION: A - August 3, 2018 Page 3 of 7 
value below acceptable limits. Incorrect adjustment of the collective friction of the flight 
control system may lead to a reduction in the safety margins of controllability of an 
affected helicopter. Hence Leonardo Helicopters has developed this Service Bulletin in 
order to confirm absence of similar cases on other in-service helicopters. 
The Service Bulletin also prescribes to apply a reduced time interval on the collective 
friction check with respect to that declared in the AMPI Chapter V (ref. Maintenance 
task 67-14). 
F. APPROVAL 
The technical content of this Service Bulletin is approved under the authority of DOA 
nr. EASA.21.J.005. For helicopters registered under other Aviation Authorities, before 
applying the Service Bulletin, applicable Aviation Authority approval must be checked 
within Leonardo Helicopters customer portal. 
EASA states mandatory compliance with inspections, modifications or technical 
directives and related time of compliance by means of relevant Airworthiness 
Directives. 
If an aircraft listed in the effectivity embodies a modification or repair not LHD certified 
and affecting the content of this Service Bulletin, it is responsibility of the 
Owner/Operator to obtain a formal approval by Aviation Authority having jurisdiction on 
the aircraft, for any adaptation necessary before incorporation of the present Service 
Bulletin. 
G. MANPOWER 
To comply with this Service Bulletin two (2) MMH are deemed necessary. 
MMH are based on hands-on time and can change with personnel and facilities 
available. 
H. WEIGHT AND BALANCE 
N.A. 
I. REFERENCES 
1) PUBLICATIONS 
DATA MODULE DESCRIPTION PART 
DM01 69-A-00-20-00-00A-120A-A Helicopter on ground for a safe 
maintenance. 
- 
DM02 69-A-67-10-00-00A-340A-A Main rotor control system - 
Function test 
-

### Page 4

S.B. N°169-082 ALERT 
 DATE: July 31, 2018 
Page 4 of 7 REVISION: A - August 3, 2018 
2) ACRONYMS 
SB Service Bulletin 
DM Data Module 
DOA Design Organization Approval 
EASA European Aviation Safety Agency 
LHD Leonardo Helicopters Division 
3) ANNEX 
N.A. 
J. PUBLICATIONS AFFECTED 
N.A. 
K. SOFTWARE ACCOMPLISHMENT SUMMARY 
N.A.

### Page 5

S.B. N°169-082 ALERT 
DATE: July 31, 2018 
REVISION: A - August 3, 2018 Page 5 of 7 
2. MATERIAL INFORMATION 
A. REQUIRED MATERIALS 
1) PARTS 
N.A. 
2) CONSUMABLES 
Refer to AMDI for the consumable materials required to comply with the AMP DM 
referenced in the accomplishment instructions. 
3) LOGISTIC MATRIX 
N.A. 
B. SPECIAL TOOLS 
Refer to ITEP for the special tools required to comply with the AMP DM referenced in 
the accomplishment instructions. 
C. INDUSTRY SUPPORT INFORMATION 
N.A.

### Page 6

S.B. N°169-082 ALERT 
 DATE: July 31, 2018 
Page 6 of 7 REVISION: A - August 3, 2018 
3. ACCOMPLISHMENT INSTRUCTIONS 
GENERAL NOTES 
a) Place an identification tag on all components that 
are re-usable, including the attaching hardware that 
has been removed to gain access to the 
modification area and adequately protect them until 
their later re-use. 
1. In accordance with DM 69-A-00-20-00-00A-120A-A, p repare the helicopter on ground for 
a safe maintenance. Disconnect the battery, all electrical power sources and/or the 
external power supply. 
2. In accordance with applicable steps of AMP DM 69-A-67-10-00-00A-340A-A, perform 
the “collective force check” procedure. 
3. With reference to Figure 1, record the measured force values and send the compiled 
“collective friction force value” check table to the AW169 PSE mail box 
pse_aw169.mbx.aw@leonardocompany.com. 
4. Return the helicopter to flight configuration and record for compliance with this Service 
Bulletin on the helicopter logbook. 
5. Send the attached compliance form to the following mail box: 
 pse_aw169.mbx.aw@leonardocompany.com 
As an alternative, gain access to My Communications section on Leonardo WebPortal 
and compile the “Service Bulletin Application Communication”.

### Page 7

Figure 1 
S.B. N°169-082 ALERT 
DATE: July 31, 2018 
REVISION: A - August 3, 2018 Page 7 of 7 
 
COLLECTIVE FRICTION FORCE VALUE CHECK 
 
AIRCRAFT S/N   DATE:  
   FH:  
   LANDINGS:  
 
 
COLLECTIVE FRICTION FORCE VALUE CHECK 
CONTROL DIRECTION FRICTION FORCE Required FRICTION FORCE Measured 
COLLECTIVE UP DIRECTION 9.00 / 18.00 N (2.02 / 4.05 lbf)  
COLLECTIVE DOWN DIRECTION 9.00 / 18.00 N (2.02 / 4.05 lbf)

### Page 8

Remarks:
Information: 
SERVICE BULLETIN COMPLIANCE   FORM Date:
Number:
Revision:
Please send to the following address: 
Telephone:
Fax:
 B.T. Compliance Date:
 Customer Name and Address:
 Helicopter Model S/N Total Number Total Hours T.S.O.
LEONARDO S.p.A.
CUSTOMER SUPPORT & SERVICES - ITALY
PRODUCT SUPPORT ENGINEERING & LICENSES DEPT. 
Via  Giovanni Agusta, 520
21017  Cascina  Costa di Samarate (VA) - ITALY 
Tel.: +39 0331 225036  Fax: +39 0331 225988
We request your cooperation in filling this form,  in order to keep out statistical data relevant to aircraft configuration up-to-date. The form should be filled in all
its parts and sent to the above address or you can communicate the application also via Technical Bulletin Application Communication Section placed in 
Leonardo AW Customer Portal - MyCommunications Area. We thank you beforehand for the information given.

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
