# Leonardo Alert Service Bulletin 169-257: No revision named

- Rights: © Leonardo S.p.A. Filed by the FAA in regulations.gov docket FAA-2025-1348, the docket of AD 2025-21-04. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Leonardo Alert Service Bulletin 169-257](https://openairdocs.org/service-documents/leonardo/sb-169-257.md)
- Title as filed: Leonardo ASB169-257
- Pages: 23
- PDF: https://openairdocs.org/files/sha256/23/9a/239a1deadcba820c80847ac62fc2f3db303be441590aba8e4bc4bf46dbd6b892
- Page: https://openairdocs.org/service-documents/leonardo/sb-169-257/file/239a1deadcba

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Pa ge 1 of 22 
N°  169-257 
DA TE:  October 30, 2023 
REV.: / - March 15, 2017 
TITLE 
ATA 95 – REPLACEMENT OF A SPECIFIC BATCH OF DART FLOATS 
REVISION LOG 
First Issue. 
An appropriate entry should be made in the aircraft log book upon accomplishment.
If ownership of aircraft has changed, please, forward to new owner.
Leonardo S.p.A.
Via Giovanni Agusta, 520
21017 Cascina Costa di Samarate (VA) Italy
Tel.: +39 0331 229111 - Fax: +39 0331 229605/222595
ALERT
SERVICE BULLETIN

### Page 2

S.B. N°169-257 ALERT 
 DATE: October 30, 2023 
Page 2 of 22 REVISION: / 
1. PLANNING INFORMATION 
A. EFFECTIVITY 
NOTE 
Installed floats with P/Ns and S/Ns present in Tables 1, 
2.A and 2.B marked with letter “R” after the S/N are not 
affected by this Service Bulletin. 
Part I 
All AW169 installing aft float with life raft assemblies P/N 6F9560V01931 and/or 
P/N 6F9560V02031, with S/Ns listed in Table 1.  
Part II 
All AW169 installing fwd float assemblies P/N 6F9560V01731, and/or 
P/N 6F9560V01831 and/or aft float with life raft assemblies P/N 6F9560V01931 and/or 
P/N 6F9560V02031, with S/Ns listed in Table 2.A and Table 2.B.  
B. COMPLIANCE 
Part I 
Within and not later than 25 flight hours after the issue of this Service Bulletin.  
Part II 
Within and not later than 24 months after the issue of this Service Bulletin or in 
conjunction with the Task 95-24 or 95-25 of the DM 69-A-05-21-00-00A-028A-A (as 
applicable), whichever occurs first. 
C.  CONCURRENT REQUIREMENTS 
N.A. 
D. REASON 
Due to manufacturing defects, DART issued the SB n°23-2 (ref. to Annex A of this 
Service Bulletin) to prescribe the replacement of three specific batches of Float 
assemblies. 
E. DESCRIPTION 
Due to two production quality escapes occurred during the manufacturing process at 
LHD supplier, DART, three batches of Emergency Floatation Systems (EFS) and 
Emergency Floatation Systems with integrated Life Rafts (EFS&LR) must be removed 
from service for repair/restoring of the approved configurations. So, this Service Bulletin 
prescribes the replacement of three specific batches of FWD EFS P/N 6F9560V01731

### Page 3

S.B. N°169-257 ALERT 
DATE: October 30, 2023 
REVISION: / Page 3 of 22 
or P/N 6F9560V01831, and of AFT EFS&LR P/N 6F9560V01931 or 
P/N 6F9560V02031 affected by two manufacturing discrepancies reported by DART. 
Depending on the defect type, the replacement is required to be performed within two 
different compliances. 
In case the replacement of any float is not performed within the allowed compliance 
time, the whole Emergency Floatation System must be deactivated and secured. 
F. APPROVAL 
The technical content of this Service Bulletin is approved under the authority of DOA 
nr. EASA.21.J.005. For helicopters registered under other Aviation Authorities, before 
applying the Service Bulletin, applicable Aviation Authority approval must be checked 
within Leonardo Helicopters customer portal. 
EASA states mandatory compliance with inspections, modifications or technical 
directives and related time of compliance by means of relevant Airworthiness 
Directives. 
If an aircraft listed in the effectivity embodies a modification or repair not LHD certified 
and affecting the content of this Service Bulletin, it is responsibility of the 
Owner/Operator to obtain a formal approval by Aviation Authority having jurisdiction on 
the aircraft, for any adaptation necessary before incorporation of the present Service 
Bulletin. 
G. MANPOWER 
To comply with this Service Bulletin the following MMH are deemed necessary. 
Part I: approximately two (2); 
Part II: approximately two (2). 
MMH are based on hands-on time and can change with helicopter configuration, 
personnel and facilities available. MMH are not comprehensive of the overall hours 
necessary to get access to work areas and to remove all the equipment that interferes 
with the application of the prescribed instructions. 
H. WEIGHT AND BALANCE 
N.A. 
I. REFERENCES 
I.1 PUBLICATIONS 
Following Data Modules refer to AMP:

### Page 4

S.B. N°169-257 ALERT 
 DATE: October 30, 2023 
Page 4 of 22 REVISION: / 
DATA MODULE DESCRIPTION PART 
DM01 69-A-00-20-00-00A-120A-A Helicopter on ground for a safe 
maintenance. 
I, II 
DM02 69-A-95-65-01-00A-720A-A Aft right float assembly – Install 
procedure 
I, II 
DM03 69-A-95-65-01-00A-520A-A Aft right float assembly – 
Remove procedure 
I, II 
DM04 69-A-95-65-02-00A-720A-A Forward right float assembly – 
Install procedure 
I, II 
DM05 69-A-95-65-02-00A-520A-A Forward right float assembly – 
Remove procedure 
I, II 
DM06 69-A-95-65-03-00A-720A-A Aft left float assembly – Install 
procedure 
II 
DM07 69-A-95-65-03-00A-520A-A Aft left float assembly – 
Remove procedure 
II 
DM08 69-A-95-65-04-00A-720A-A Aft right float assembly – Install 
procedure 
II 
DM09 69-A-95-65-04-00A-520A-A Aft right float assembly – 
Remove procedure 
II 
 
Following Data Module refers to AMPI: 
DATA MODULE DESCRIPTION PART 
DM10 69-A-05-21-00-00A-028A-A Maintenance tasks overview – 
General. 
I, II 
I.2 ACRONYMS & ABBREVIATIONS 
AMDI Aircraft Material Data Information 
AMP Aircraft Maintenance Publication 
CB Circuit Breaker 
DM Data Module 
DOA Design Organization Approval 
EASA European Aviation Safety Agency 
EFS Emergency Floatation System  
EFS&LR Emergency Floatation System and Life Raft  
FWD Forward 
LH Leonardo Helicopters 
MMH Maintenance Man Hours 
P/N Part Number 
S/N Serial Number 
I.3 ANNEX 
ANNEX A SB DART N°23-2 
ANNEX B FLOAT AND LIFE RAFT INHIBITION PROCEDURE

### Page 5

S.B. N°169-257 ALERT 
DATE: October 30, 2023 
REVISION: / Page 5 of 22 
J. PUBLICATIONS AFFECTED 
N.A. 
K. SOFTWARE ACCOMPLISHMENT SUMMARY 
N.A.

### Page 6

S.B. N°169-257 ALERT 
 DATE: October 30, 2023 
Page 6 of 22 REVISION: / 
2. MATERIAL INFORMATION 
A. REQUIRED MATERIALS 
A.1 PARTS 
PART I 
# P/N ALTERNATIVE P/N DESCRIPTION Q.TY LVL NOTE LOG P/N 
1 6F9560V01931  AFT LH Float with life raft Assy AR . (1) - 
2 6F9560V02031  AFT RH Float with life raft Assy AR . (1) - 
 
PART II 
# P/N ALTERNATIVE P/N DESCRIPTION Q.TY LVL NOTE LOG P/N 
3 6F9560V01731  FWD LH Float Assy  AR . (1) - 
4 6F9560V01831  FWD RH Float Assy AR . (1) - 
5 6F9560V01931  AFT LH Float with life raft Assy AR . (1) - 
6 6F9560V02031  AFT RH Float with life raft Assy AR . (1) - 
 
Refer also to IPD for the spares materials required to comply with the AMP DMs 
referenced in the accomplishment instructions. 
A.2  CONSUMABLES 
Refer to AMDI for the consumable materials required to comply with the AMP DMs 
referenced in the accomplishment instructions. 
A.3 LOGISTIC MATRIX 
N.A. 
NOTE 
(1) Item to be ordered or not according to the S/N already installed on the helicopter. 
B. SPECIAL TOOLS 
Refer to ITEP for the special tools required to comply with the AMP DMs referenced in 
the accomplishment instructions. 
C. INDUSTRY SUPPORT INFORMATION 
Owners/Operators who comply with the instructions of this Service Bulletin no later than 
the applicable date in the “Compliance” section will be eligible to receive REQUIRED 
MATERIALS on free of charge basis, except for Consumable Materials and Special 
Tools. 
NOTE: Customers who fail to comply with the instructions in this Service Bulletin before 
the compliance date are not eligible for the aforementioned special policy.

### Page 7

S.B. N°169-257 ALERT 
DATE: October 30, 2023 
REVISION: / Page 7 of 22 
Please Issue relevant MMIR for each item affected form to your Warranty 
Administration Dpt. 
NOTE: WRM will include RETURN MATERIAL AUTHORIZATION (RMA) number; the 
unit disembarked from the aircraft (P/N 6F9560V01731 and/or 6F9560V01831 and/or 
P/N 6F9560V01931 and/or 6F9560V02031) has to be returned to LH within thirty (30) 
calendar days after the shipment of the replacement part. In case of missing return 
within thirty (30) calendar days, Customer will be invoiced for the price of the 
replacement part (P/N 6F9560V01731 and/or 6F9560V01831 and/or 
P/N 6F9560V01931 and/or 6F9560V02031).

### Page 8

S.B. N°169-257 ALERT 
 DATE: October 30, 2023 
Page 8 of 22 REVISION: / 
3. ACCOMPLISHMENT INSTRUCTIONS 
GENERAL NOTES 
a) Place an identification tag on all components that 
are re-usable, including the attaching hardware that 
has been removed to gain access to the modification 
area and adequately protect them until their later re-
use. 
b) Shape the cables in order to prevent interference 
with the structure and the other existing installations, 
using where necessary suitable lacing cords and 
plastic cable tiedown. 
c) During the installation of bonding braids or 
components requiring grounding, clean the surface 
structure in order to obtain a good ground contact. 
d) Exposed thread surface and nut must be protected 
using a layer of tectyl according to MIL-C-16173 
grade I. 
e) All lengths are in mm. 
PART I 
1. In accordance with AMP DM 69-A-00-20-00-00A-120A-A, prepare the helicopter on 
ground for a safe maintenance. Disconnect the battery, all electrical power sources and/or 
the external power supply. 
WARNING 
IF IT IS NOT POSSIBLE TO INSTALL A NEW FLOAT 
ASSY WITHIN THE COMPLIANCE TIME, FLOAT AND 
LIFE RAFT SYSTEM MUST BE INHIBITED IN 
ACCORDANCE WITH ANNEX B. 
NOTE 
Repeat the following steps 2 and 3 for all the affected 
fwd float assemblies left/right. 
2. In accordance with AMP DM 69-A-95-65-03-00A-520A- A or AMP DM 69-A-95-65-04-00A-
520A-A (as applicable), remove the affected aft float with life raft assy and send it back to 
Leonardo so to comply with DART SB N°23-2.

### Page 9

S.B. N°169-257 ALERT 
DATE: October 30, 2023 
REVISION: / Page 9 of 22 
NOTE 
An aft float with life raft assy is considered serviceable if 
its S/N does NOT belong to the list shown in Table 1 
(ref. to Fig. 1) OR, for the S/N is present in Table 1, if a 
letter “R” is marked after the S/N. 
3. In accordance AMP DM 69-A-95-65-03-00A-720A-A or AMP DM 69-A-95-65-04-00A-
720A-A (as applicable), reinstall a serviceable aft float with life raft assy.  
4. Return the helicopter to flight configuration and record for compliance with Part I of this 
Service Bulletin on the helicopter logbook. 
5. Gain access to My Communications section on Leonardo WebPortal and compile the 
“Service Bulletin Application Communication”.  
As an alternative, send the attached compliance form to the following mail box: 
 engineering.support.lhd@leonardo.com  
and (for North, Central and South America) also to: 
 AWPC.Engineering.Support@leonardocompany.us

### Page 10

S.B. N°169-257 ALERT 
 DATE: October 30, 2023 
Page 10 of 22 REVISION: / 
PART II 
1. In accordance with AMP DM 69-A-00-20-00-00A-120A-A, prepare the helicopter on 
ground for a safe maintenance. Disconnect the battery, all electrical power sources and/or 
the external power supply. 
WARNING 
IF IT IS NOT POSSIBLE TO INSTALL A NEW FLOAT 
ASSY WITHIN THE COMPLIANCE TIME, FLOAT AND 
LIFE RAFT SYSTEM MUST BE INHIBITED IN 
ACCORDANCE WITH ANNEX B. 
NOTE 
Repeat the following steps 2 and 3 for all the affected 
fwd float or aft float with life raft assemblies left/right. 
2. In accordance with AMP DM 69-A-95-65-01-00A-520A- A, AMP DM 69-A-95-65-02-00A-
520A-A, AMP DM 69-A-95-65-03-00A-520A-A or AMP DM 69-A-95-65-04-00A-520A-A 
(as applicable), remove the affected fwd float or aft float with life raft assy (as applicable) 
and send it back to Leonardo so to comply with DART SB N°23-2.  
NOTE 
An aft float with life raft assy and a fwd float assy are 
considered serviceable if their S/Ns do NOT belong to 
the list shown in Table 2.A and/or Table 2.B (ref. to Figg. 
1-2) OR, for S/Ns are present in Table 2.A and/or table 
2.B, if a letter “R” is marked after the S/N. 
3. In accordance with AMP DM 69-A-95-65-01-00A-720A- A, AMP DM 69-A-95-65-02-00A-
720A-A, AMP DM 69-A-95-65-03-00A-720A-A or AMP DM 69-A-95-65-04-00A-720A-A 
(as applicable), reinstall a serviceable fwd float or aft float with life raft assy (as applicable).  
4. Return the helicopter to flight configuration and record for compliance with Part II of this 
Service Bulletin on the helicopter logbook. 
5. Gain access to My Communications section on Leonardo WebPortal and compile the 
“Service Bulletin Application Communication”.  
As an alternative, send the attached compliance form to the following mail box: 
 engineering.support.lhd@leonardo.com  
and (for North, Central and South America) also to: 
 AWPC.Engineering.Support@leonardocompany.us 
 
 
  Non cancellare mai questo segnalibro Non cancellare mai interruzione sezione 

### Page 11

Figure 1 
S.B. N°169-257 ALERT 
DATE: October 30, 2023 
REVISION: / Page 11 of 22 
P/N S/N P/N S/N 
6F9560V01931 
652.2301-00019 
6F9560V02031 
652.2302-00019 
652.2301-00027 652.2302-00020 
652.2301-00028 652.2302-00022 
652.2301-00029 652.2302-00023 
652.2301-00030 652.2302-00024 
652.2301-00031 652.2302-00025 
652.2301-00032 652.2302-00026 
652.2301-00033 652.2302-00027 
652.2301-00034 652.2302-00028 
652.2301-00035 652.2302-00029 
652.2301-00036 652.2302-00030 
652.2301-00037 652.2302-00031 
652.2301-00038 652.2302-00032 
652.2301-00039 652.2302-00033 
652.2301-00040 652.2302-00034 
652.2301-00041   
 
AFT FLOAT WITH LIFE RAFT  
TABLE 1

### Page 12

Figure 2  
 S.B. N°169-257 ALERT 
 DATE: October 30, 2023 
Page 12 of 22 REVISION: / 
P/N S/N P/N S/N 
6F9560V01731 
652.2401-00021 
6F9560V01831 
652.2402-00019 
652.2401-00022 652.2402-00020 
652.2401-00023 652.2402-00021 
652.2401-00024 652.2402-00022 
652.2401-00025 652.2402-00023 
652.2401-00026 652.2402-00024 
652.2401-00027 652.2402-00025 
652.2401-00028 652.2402-00026 
652.2401-00029 652.2402-00027 
652.2401-00030 652.2402-00028 
652.2401-00031 652.2402-00029 
652.2401-00032 652.2402-00030 
652.2401-00033 652.2402-00031 
652.2401-00034 652.2402-00033 
652.2401-00035 652.2402-00034 
652.2401-00036 652.2402-00035 
652.2401-00037 652.2402-00036 
652.2401-00038 652.2402-00037 
 
FWD FLOAT  
TABLE 2.A

### Page 13

Figure 3 
S.B. N°169-257 ALERT 
DATE: October 30, 2023 
REVISION: / Page 13 of 22 
P/N S/N P/N S/N 
6F9560V01931 
652.2301-00006 
6F9560V02031 
652.2302-00005 
652.2301-00012 652.2302-00006 
652.2301-00013 652.2302-00008 
652.2301-00016 652.2302-00010 
652.2301-00017 652.2302-00011 
652.2301-00018 652.2302-00012 
652.2301-00020 652.2302-00013 
652.2301-00021 652.2302-00014 
652.2301-00022 652.2302-00015 
652.2301-00023 652.2302-00017 
652.2301-00024 652.2302-00018 
652.2301-00025 652.2302-00021 
652.2301-00026 652.2302-00037 
652.2301-00047 652.2302-00041 
652.2301-00050   
652.2301-00053   
 
AFT FLOAT WITH LIFE RAFT  
TABLE 2.B

### Page 14

ANNEX A 
 S.B. N°169-257 ALERT 
 DATE: October 30, 2023 
Page 14 of 22 REVISION: / 
 
ANNEX A 
DART SB N°23-2

### Page 15 (OCR)

LEONARDO
ANNEX A  HELICOPTERS
DART
AEROSPACE
DART AEROSPACE  DART AEROSPACE
8903 AV. TABALAPOA  1270 ABERDEEN ST.
PARQUE INDUSTRIAL CHIHUAHUA, SUR  HAWKESBURY, ON, K6A 1K7
CHIHUAHUA, CHIH. 31385  PH: (613) 632-5200 FAX: (613) 632-5246
Website: dartaerospace.com  Website: dartaerospace.com
SERVICE BULLETIN
Document Number: SB23-2
Date: 2023-10-20
Revision: NC
Affected Components:
Table 1 - Affected Components
Config  Description  Part  P/Ns  Issue  Affected S/Ns
652.2402-00019 / 00020 / 00021 / 00022 /
1  Fwd RH Float  6F9560V01831  (652.2402)  Non-Conforming  Girt Bars  00029 / 00030 / 00031 / 00033 / 00034 / 00035 /  00023 / 00024 / 00025 / 00026 / 00027 / 00028 /
00036 / 00037
652.2401-00021 / 00022 / 00023 / 00024 /
1  Fwd LH Float  6F9560V01731  (652.2401)  Non-Conforming  Girt Bars  00025 / 00026 / 00027 / 00028 / 00029 / 00030 /  00031 / 00032 / 00033 / 00034 / 00035 / 00036 /
00037 / 00038
2A  Aft RH Float  w/ Liferaft  6F9560V02031  (652.2302)  Non-Conforming  Girt Bars  652.2302-00027 / 00028 / 00030 / 00031 /  00032 / 00033 / 00034
2B  Aft RH Float  w/ Liferaft  6F9560V02031  (652.2302)  Non-Conforming  Belt Loops  00011 / 00012 / 00013 / 00014 / 00015 / 00017 /  652.2302-00005 / 00006 / 00008 / 00010 /  00018 / 00021 / 00037 / 00041
2C  Aft RH Float  w/ Liferaft  6F9560V02031  (652.2302)  Non-Conforming  Girt Bars & Belt  652.2302-00019 / 00020 / 00022 / 00023 /  00024 / 00025 / 00026 / 00029
Loops
Aft LH Float  6F950V01931  Non-Conforming  652.2301-00034 / 00035 / 00040 / 00041
2A  w/ Liferaft  (652.2301)  Girt Bars
2B  Aft LH Float  w/ Liferaft  6F950V01931  (652.2301)  Non-Conforming  Belt Loops  00017 / 00018 / 00020 / 00021 / 00022 / 00023 /  00024 / 00025 / 00026 / 00047 / 00050 / 00053  652.2301-00006 / 00012 / 00013 / 00016 /
Non-Conforming  652.2301-00019 / 00027 / 00028 / 00029 /
Aft LH Float  6F950V01931
2C  w/ Liferaft  (652.2301)  Girt Bars & Belt  Loops  00030 / 00031 / 00032 / 00033 / 00036 / 00037 /  00038 / 00039
NOTE: This SERVICE BULLETIN is sent to AW169 operators of record for the
affected components as shown above. If an aircraft has been leased or
sold, please send this SERVICE BULLETIN to the new operator.
• COPYRIGHT 2023 BY DART AEROSPACE *
HIS DOCUMENT IS PRIVATE AND CONFIDENTIAL AND IS SUPPLIED ON THE EXPRESS CONDITION THAT IT IS NOT TO BE USED FOR ANY PURPOSE OR COPIE
OR COMMUNICATED TO ANY OTHER PERSON WITHOUT WRITTEN PERMISSION FROM DART AEROSPAC
S.B. N°169-257 ALERT
DATE: October 30, 2023
REVISION: /  Page 15 of 22

### Page 16 (OCR)

ANNEX A  K LEONARDO  HELICOPTERS
DART
SUBJECT:  AEROSPACE  DOCUMENT NO:
SERVICE BULLETIN  SB23-2
REFERENCE DRAWING:  Rev. NC
652.2300, 652.2400  2023-OCT-20
LOG OF REVISIONS
Rev  Date  Pages  Description  Approval
N/C  2023-OCT-20  All  Initial Release  D. Shepherd
d.
Copyright 2023  SEE NON-DISCLOSURE NOTICE  Page 2 of 6
All Rights Reserved  ON THE COVER PAGE
S.B. N°169-257 ALERT
DATE: October 30, 2023
Page 16 of 22  REVISION: /

### Page 17 (OCR)

ANNEX A  · LEONARDO  HELICOPTERS
DART
SUBJECT:  AEROSPACE  DOCUMENT NO:
SERVICE BULLETIN  SB23-2
REFERENCE DRAWING:  Rev. NC
652.2300, 652.2400  2023-OCT-20
SAFETY SUMMARY
GENERAL PRECAUTIONS
Personal Protective Equipment (PPE) shall be worn when exposed to flying particles, liquid
chemicals, or other potential hazards to the skin, eyes, ears, or respiratory system.
Ensure that the work area is free from dirt and foreign matter and contaminants that could
otherwise damage functionality.
Failure to comply with or deviate from the procedure may negatively affect the equipment. It is
the operator's responsibility to comply with these procedures.
DEFINITIONS
WARNING: THIS INDICATES INFORMATION THAT, IF NOT FOLLOWED, COULD RESULTIN
PERSONAL INJURY, DEATH, OR LONG-TERM HEALTH CONDITIONS.
CAUTION:  THIS INDICATES INFORMATION THAT, IF NOT FOLLOWED, MAY RESULT IN
DAMAGE TO OR DESTRUCTION OF EQUIPMENT, OR THE LOSS OF MISSION
EFFECTIVENESS.
NOTE:  This indicates information that aids in understanding or provides additional detall on
the methods of a procedure.
Copyright 2023  SEE NON-DISCLOSURE NOTICE  Page 3 of 6
All Rights Reserved  ON THE COVER PAGE
S.B. N°169-257 ALERT
DATE: October 30, 2023
REVISION: /  Page 17 of 22

### Page 18 (OCR)

: LEONARDO
ANNEX A  HELICOPTERS
DART
SUBJECT:  AEROSPACE  DOCUMENT NO:
SERVICE BULLETIN  SB23-2
REFERENCE DRAWING:  Rev. NC
652.2300, 652.2400  2023-OCT-20
A. SUBJECT: Non-conforming Girt Bars and incorrectly positioned Belt Loops present in AW169
Emergency Float System Pod Assemblies (reference Effectivity in Table 1 on Page 1).
B. BACKGROUND: It has been discovered that non-conforming Girt Bars were used in the main
attachment points on some forward and aft float pod assemblies for the AW169 Emergency
Float System. Furthermore, the Belt Loops on some aft float pod assemblies were improperly
located. Based on an analysis performed by the Dart Quality Team, it has been determined
that the Pod Assemblies listed in Table 1 have been affected.
C. REASON: With respect to the Girt Bar Issue, the chamfer note for the edges of the Girt Bars
was not adhered to by the supplier. With respect to the Belt Loop Issue, the markings on the
float for the placement of the Belt Loops was not adhered to by the Dart fabricators.
D. ACTION: This SERVICE BULLETIN (SB) supports the actions provided in Section 1.0.
E. COMPLIANCE: Operators shall comply with this Service Bulletin according to Table 2.
F. MANPOWER: Maintenance-Man-Hours are based on hands-on time and can change per
facility and availability of qualified personnel. Compliance with this SB will require TBD
additional hours for the end user.
G. WEIGHT & BALANCE: Weight and Balance are not affected by this SB.
H. PUBLICATIONS AFFECTED: N/A
Copyright 2023  SEE NON-DISCLOSURE NOTICE  Page 4 of 6
All Rights Reserved  ON THE COVER PAGE
S.B. N°169-257 ALERT
DATE: October 30, 2023
Page 18 of 22  REVISION: /

### Page 19 (OCR)

LEONARDO
ANNEX A  HELICOPTERS
DART
SUBJECT:  AEROSPACE  DOCUMENT NO:
SERVICE BULLETIN  SB23-2
REFERENCE DRAWING:  Rev. NC
652.2300, 652.2400  2023-OCT-20
ACCOMPLISHMENT INSTRUCTIONS
1.0 INSTRUCTIONS
1.1 Operator Instructions
Operators shall contact the aircraft manufacturer in order to manage the return of the
AW169 forward and aft float assembly pods listed in Table 1 according to the
compliance times shown in Table 2.
Table 2 - Rework Schedule
Config  Description  Return to Dart
Fwd Floats with Non-Conforming Girt Bars  Next 24 Month Service Interval
2A  Aft Floats with Non-Conforming Girt Bars  Within 25 Flight Hours
2B  Aft Floats with Non-Conforming Belt Loops  Next 24 Month Service Interval
2C  Aft Floats with Non-Conforming Girt Bars & Belt Loops  Within 25 Flight Hours
The aircraft manufacturer may obtain return authorization by contacting DART via email
at support@dartaero.com.
1.2 DART Service Center Instructions
DART Service Centers shall rework affected AW169 forward and aft float assembly
pods as follows:
A) AW169 Forward RH/LH Pod Assemblies with Girt Bar Issues (Config 1)
1) Remove Float from Pod Assembly and retain
2) Rework Girts per MPP (Manufacturing Process Procedure) 242.
3) Install reworked Float on Pod Assembly and pack per MPP 224.
4) Re-identify modified Pod Assembly as outlined in Step D) below
B) AW169 Aft RH/LH Pod Assemblies with Belt Loop Issues (Config 2B/2C)
1) Remove Float from Pod Assembly and discard.
2) Install new Float on Pod Assembly and pack per MPP 223
3) Re-identify modified Pod Assembly as outlined in Step D) below
C) AW169 Aft RH/LH Pod Assemblies with Girt Bar Issues Only (Config 2A)
1) Remove Float from Pod Assembly.
2) Remove all Girt Bars and discard.
3) Install Aft Float on Pod Assembly with new Girt Bars and pack per MPP 223.
4) Re-identify modified Pod Assembly as outlined in Step D) below.
Copyright 2023  SEE NON-DISCLOSURE NOTICE  Page 5 of 6
All Rights Reserved  ON THE COVER PAGE
S.B. N°169-257 ALERT
DATE: October 30, 2023
REVISION: /  Page 19 of 22

### Page 20 (OCR)

ANNEX A  * LEONARDO  HELICOPTERS
DART
SUBJECT:  AEROSPACE  DOCUMENT NO:
SERVICE BULLETIN  SB23-2
REFERENCE DRAWING:  Rev. NC
652.2300, 652.2400  2023-OCT-20
D) Pod Re-identification (Al Configurations)
Once the Float Pod Assembly has been reworked, the Float Pod Assembly should
be marked with an "R" next to the S/N as shown in Figure 1 to indicate that the
component is compliant with this Service Bulletin. The Component Log Card must
be updated in order to track the rework completion.
600.1423 REV. N/C
DART
AERO SFACL
APICAL INDUSTRIES INC. DBA DART AEROSPACE  TITLE: FWD FLOAT ASSEMBLY LH
LEONARDO HELICOPTERS P/N: 6F9560V01731 REV. 6
DART P/N: 652.2401 REV: E S/N: 652.2401-00 35R
DOM: 21-FEB-2023  WEIGHT 11.00 Kg
FLOAT P/N: 6F9560V021
CONCESSION NO: 400000/14290RT.
INSPECTOR STAMP:
Figure 1 - Pod Re-identification
NOTE: AW169 Emergency Float System Pod Assemblies that have a
S/N with an "R" suffix are no longer affected by this Service
Bulletin.
2.0 GENERAL
For continued airworthiness support, please contact the DART Technical Support Team by
email at support@dartaero.com or though the DART Aerospace website
(www.dartaerospace.com).
Copyright 2023  SEE NON-DISCLOSURE NOTICE  Page 6 of 6
All Rights Reserved  ON THE COVER PAGE
S.B. N°169-257 ALERT
DATE: October 30, 2023
Page 20 of 22  REVISION: /

### Page 21

ANNEX B 
S.B. N°169-257 ALERT 
DATE: October 30, 2023 
REVISION: / Page 21 of 22 
 
ANNEX B 
FLOAT AND LIFE RAFT INHIBITION PROCEDURE

### Page 22 (OCR)

LEONARDO
ANNEX B  HELICOPTERS
Press the HOME button on the EDCU 1 or 2 and then on the Aircraft System box press the
BREAKERS Button. Then press the MAINT button. On the BREAKERS - SYSTEM page
breaker by pressing the related button and verify that the status of the selected breaker
select the MISC button and verify that the status of the selected breaker is LOCKED (grey).
Pull off the FLOAT EMER breaker on the FLOAT section of the overhead circuit breaker
panel secure the system by locking the deactivated circuit breaker and tag accordingly.
EHER BUS 2
HOLI  • DISPLAY
Figure B.1
Install in clear view of the pilot a locally manufactured decal with white text on a red
background, with written "EMERGENCY FLOATATION SYSTEM DEACTIVATED".
(Fig. B.2 is for reference only).
EMERGENCY FLOATATION
SYSTEM DEACTIVATED
Figure B.2
DECAL SCALE 1:1
S.B. N°169-257 ALERT
DATE: October 30, 2023
Page 22 of 22  REVISION: /

### Page 23

Remarks:
Information: 
SERVICE BULLETIN COMPLIANCE   FORM Date:
Number:
Revision:
Please send to the following address: 
Telephone:
Fax:
 B.T. Compliance Date:
 Customer Name and Address:
 Helicopter Model S/N Total Number Total Hours T.S.O.
LEONARDO S.p.A.
CUSTOMER SUPPORT & SERVICES - ITALY
PRODUCT SUPPORT ENGINEERING & LICENSES DEPT. 
Via  Giovanni Agusta, 520
21017  Cascina  Costa di Samarate (VA) - ITALY 
Tel.: +39 0331 225036  Fax: +39 0331 225988
We request your cooperation in filling this form,  in order to keep out statistical data relevant to aircraft configuration up-to-date. The form should be filled in all
its parts and sent to the above address or you can communicate the application also via Technical Bulletin Application Communication Section placed in 
Leonardo AW Customer Portal - MyCommunications Area. We thank you beforehand for the information given.

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
