# MD Helicopters Service Bulletin 369D-213: No revision named

- Rights: © MD Helicopters Inc. Filed by the FAA in regulations.gov docket FAA-2015-3658; AD 2016-05-09 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [MD Helicopters Service Bulletin 369D-213](https://openairdocs.org/service-documents/md-helicopters/369d-213.md)
- Title as filed: MD Helicopters SB SB369D-213, SB369E-111, SB369F-098, SB369H-255, and SB500N-049
- Pages: 10
- PDF: https://openairdocs.org/files/sha256/c3/61/c361a36df7565d95546be1d2482974e7d6948c5b27f22dacfb8ae8890ee423ab
- Page: https://openairdocs.org/service-documents/md-helicopters/369d-213/file/c361a36df756

## Text

This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

SB369H-255  SB369D-213
HELICOPTERS  SB369E-111  SB369F-098
SB500N-049
SERVICE BULLETIN  DATE: 30 APRIL 2014
PAGE 1 OF 10
• MANDATORY  I MANDATORY  O MANDATORY
ONE-TIME INSPECTION OF FUEL PUMP HARNESS ROUTING
AND DECAL INSTALLATION
* Supersedes Service Bulletin SB369HN-210, SB369DN-150, SB369EN-38, and SB369FN-27,
dated 15 September 1987. Revised to the latest MD Helicopters, Inc. (MDHI) style and format.
1. PLANNING INFORMATION
A. Aircraft Affected:
All MD Helicopters, Inc. (MDHI) Model 369A (OH-6A), 369H, 369HE, 369HS, 369HM,
AND 369D helicopters.
MDHI Model 369E helicopters, SN's 0001E thru 0620E.
MDHI Model 369F/FF helicopters, SN's 0001FF thru 0212FF, 0600FF thru 0602FF and
0700FF thru 0711FF with a PN 369A8143-3 auxiliary fuel pump installed.
MDHI Model 500N helicopters, SN's LN001 thru LN0111.
B. Assembly/Components Affected By This Notice:
369A8143 or 369A8143-3 Auxiliary Fuel Pump Assemblies
369A8113 LH Fuel Cell Fuel Inlet Hose Assembly
C. Reason:
Recent field incidents have occurred where maintenance personnel have not followed the
procedures in CSP-H-2 or CSP-HMI-2 regarding the installation of the auxiliary fuel
(start) pump. An incorrectly positioned auxiliary fuel (start) pump wire can interfere with
the fuel quantity sensor float. This interference can result in erroneous fuel quantity
indications. To prevent this situation, the fuel pump wire must be wrapped around the fuel
inlet hose as shown in the applicable maintenance manual.
D. Description:
Procedures in this bulletin give owners and operators information to do a one-time
inspection of the auxiliary fuel pump assembly wire routing in the left hand fuel cell, and
corrective action, if necessary. A decal is also installed on the LH fuel cell access cover that
refers personnel to the procedures contained in the appropriate maintenance manual.
E. Time of Compliance:
insp requirements of this bulletin must be completed no later than the next 100 hour
F. FAA Approval:
The technical design aspects of this bulletin are FAA Approved.
G. Manpower:
Compliance with this bulletin will be approximately three (3) man-hours to complete the
inspection and test and approximately one (1) man-hour to re-route the auxiliary fuel
pump wire if required.
Copyright 1999-2014 by MD Helicopters Inc.
This document may be reproduced and distributed provided no fee is charged,
the text is not modified, and this copyright notice is included.
MANDATORY  • MANDATORY  / MANDATORY

### Page 2 (OCR)

SB369H-255  SB369D-213
SB369E-111  SB369F-098  HELICOPTERS
SB500N-049
DATE: 30 APRIL 2014  SERVICE BULLETIN
PAGE 2 OF 10
MANDATORY  MANDATORY  MANDATORY /
H. Interchangeability:
None.
I. Points of Contact:
For further assistance, contact the Field Service Department at MDHI, Mesa, Arizona.
Telephone 1-800-388-3378 or 480-346-6387. DATAFAX: 480-346-6813.
J. Material/Part Availability:
Contact MDHI Spare Parts Sales Department for parts availability.
Telephone: 1-800-388-3378 Option 2 or 480-346-6540. DATAFAX: 480-346-6821.
REPLACEMENT PARTS/SUPPLIES
Nomenclature  Part No.  Qty.  Source
Gasket, Fuel Quantity Transmitter  369A4518  1  MDHI
Decal, Warning - Start Pump  MHS5861-66  1  MDHI
Adhesive, Fast Setting  MDM16-1068, Class 8B  1  MDHI or Commercial
Epibond 1217 A/B  (1 oz
(RM011959)  (28G))
K. Warranty Policy:
Contact the MDHI Warranty Department for prices, orders, and availability.
Telephone: 1-800-388-3378 or 480-346-6403. DATAFAX: 480-346-6814.
MDHI Warranty Department will give authorized Service Centers not more than 4 hours of
labor credit (spares credit) to complete this modification.
Standard warranty policy applies.
L. Disposition of Parts Removed:
N/A
M. Tooling:
N/A
N. Weight and Balance:
N/A
O. Electrical Load Data:
N/A
P. Other Publications Affected:
N/A
Q. Reference Publications:
CSP-H-2 Basic Handbook of Maintenance Instructions
Copyright 1999-2014 by MD Helicopters Inc.
This document may be reproduced and distributed provided no fee is charged,
the text is not modified, and this copyright notice is included.
MANDATORY  • MANDATORY  / MANDATORY //

### Page 3 (OCR)

SB369H-255  SB369D-213
HELICOPTERS  SB369E-111  SB369F-098
SB500N-049
SERVICE BULLETIN  DATE: 30 APRIL 2014
PAGE 3 OF 10
MANDATORY  / MANDATORY  MANDATORY
CSP-H-7 Illustrated Parts Catalog
CSP-HMI-2 Basic Handbook of Maintenance Instructions - Servicing and Maintenance
CSP-IPC-4 Illustrated Parts Catalog
2. ACCOMPLISHMENT INSTRUCTIONS
A. Get Access to the LH Fuel Cell Cover Assembly
(1). Make sure all electrical power is otf.
(2). Get access to the LH fuel cell cover assembly. Refer to CSP-H-2, Section 12 or CSP-
HMI-2, Section 28-00-00, as applicable.
B. Remove the Fuel Quantity Sensor
WARNING
Use all necessary precautions consistent with safe practice when working in or
around fuel cells.
CAUTION
Care shall be taken not to damage fuel float arm or low fuel level warning contact
spring while accomplishing this bulletin.
(1). Disconnect the wire harness from the fuel quantity sensor (1, Figure 1).
(2). Cut and remove the lockwire (3) from the five bolts (4) that attach the fuel quantity
sensor (1) to the support assembly (6).
(3). Remove the five bolts (4) and five washers (5) from the fuel quantity sensor (1).
(4). Carefully lift the fuel quantity sensor (1) up and out of the support assembly (6).
Remove and discard the fuel quantity sensor gasket (2).
C. Inspect Auxiliary Fuel Pump Assembly Wire Routing
(1). Use a shop mirror and flashlight to inspect the auxiliary fuel pump wire routing. Refer
to Figure 2. The auxiliary fuel pump wire must be wrapped around the LH fuel cell fuel
inlet hose assembly a minimum of one revolution.
(2). If the auxiliary fuel pump wire is wrapped around the LH fuel cell fuel inlet hose,
re-install the fuel quantity sensor (Ref. Step 2.D.), then go to Step 2.F.
(3). If the auxiliary fuel pump wire is not wrapped around the LH fuel cell fuel inlet hose,
re-install the fuel quantity sensor (Ref. Step 2.D.), then go to Step 2.E.
Copyright 1999-2014 by MD Helicopters Inc.
This document may be reproduced and distributed provided no fee is charged,
the text is not modified, and this copyright notice is included.
MANDATORY ///  • MANDATORY

### Page 4 (OCR)

SB369H-255  SB369D-213
SB369E-111  SB369F-098  HELICOPTERS
SB500N-049
DATE: 30 APRIL 2014  SERVICE BULLETIN
PAGE 4 OF 10
• MANDATORY  I MANDATORY  MANDATORY /
D. Install the Fuel Quantity Sensor
(1). Install a new fuel quantity sensor gasket (2, Figure 1) on the fuel quantity sensor (1).
(2). Install the fuel quantity sensor in the support assembly and secure with five bolts (4)
and five washers (5). Lockwire (3) the five bolts.
(3). Connect the wiring harness connector to the fuel quantity sensor (1).
(4). Go to Step 2.F.
E. Route the Auxiliary Fuel Pump Wire Around the LH Fuel Cell Fuel Inlet Hose
(1). Loosen the nut on the cable clamp and disconnect control cable (7, Figure 1) from fuel
shutoff valve (8).
(2). Disconnect the LH fuel cell fuel inlet hose assembly (9) from the LH fuel cell fuel shutoff
valve (8) assembly.
(3). Disconnect the wiring harness connector from the auxiliary fuel pump wire (13)
connector at the LH fuel cell cover (6).
(4). Remove the bolts (13) and washers (14) securing the LH fuel cell cover (6) to the LH fuel
cell. Carefully pry up the edge of the fuel cell cover (6) to break loose from the LH fuel
cell.
(5). Remove the auxiliary fuel pump connector jam nut (13) and remove the connector from
the LH fuel cell cover.
(6). Wrap the auxiliary fuel pump wire around the LH fuel cell fuel inlet hose, a minimum of
one revolution, in such a way that it cannot interfere with the operation of the fuel
quantity sensor float. Refer to Figure 2.
(7). Install the auxiliary fuel pump wire thru the LH fuel cell cover (6, Figure 1) and secure
with hex nut (13).
(8). Re-seat the LH fuel cell cover (6) on the LH fuel cell and secure with washers (14) and
bolts (13).
(9). Go to Step 2.F.
Copyright 1999-2014 by MD Helicopters Inc.
This document may be reproduced and distributed provided no fee is charged,
the text is not modified, and this copyright notice is included.
MANDATORY  • MANDATORY  /I MANDATORY/

### Page 5 (OCR)

SB369H-255  SB369D-213
HELICOPTERS  SB369E-111  SB369F-098
SB500N-049
SERVICE BULLETIN  DATE: 30 APRIL 2014
PAGE 5 OF 10
MANDATORY  MANDATORY  MANDATORY
, 12
+
MA'ARNING
OUTING OF START PUMP
CAUSE INTERFERENCE
E FUEL QUANTITY
FLOAT ARM RESULTION
ONEOUS FUEL QUANTITY
REFER TO HELICOPTER
ENANCE MANUAL FOR PROPER
- TANK COVER, FUEL QUANTITY
NSMITTER, AND START PUMP
6
88-647
Figure 1. Fuel Cell Cover and Components
Copyright 1999-2014 by MD Helicopters Inc.
This document may be reproduced and distributed provided no fee is charged,
the text is not modified, and this copyright notice is included.
MANDATORY L  I MANDATORY L  MANDATORY /

### Page 6 (OCR)

SB369H-255  SB369D-213
SB369E-111  SB369F-098  HELICOPTERS
SB500N-049
DATE: 30 APRIL 2014  SERVICE BULLETIN
PAGE 6 OF 10
_ MANDATORY  / MANDATORY  / MANDATORY
Legend (Ref. Figure 1)
Item  Nomenclature  Item  Nomenclature
1.  Fuel Quantity Sensor  8.  Fuel Shut-off Valve
2.  Fuel Quantity Sensor Gasket  9.  LH Fuel Cell Fuel Inlet Hose Assembly
3.  Lockwire  10.  Bolt
4.  Bolt  11.  Washer
S.  Washer  12.  Start Pump Warning Decal
6.  LH Fuel Cell Cover  13.  Auxiliary Fuel Pump Wire
7.  Control Cable
Copyright 1999-2014 by MD Helicopters Inc.
This document may be reproduced and distributed provided no fee is charged,
the text is not modified, and this copyright notice is included.
MANDATORY  • MANDATORY

### Page 7 (OCR)

SB369H-255  SB369D-213
HELICOPTERS  SB369E-111  SB369F-098
SB500N-049
SERVICE BULLETIN
/ MANDATORY /  MANDATORY
DATE: 30 APRIL 2014
PAGE 7 OF 10
/ MANDATORY
FUEL INLET HOSE
LH FUEL CELL COVER
AUXILIARY FUEL PUMP
AUXILIARY FUEL
PUMP WIRE
88-646
Figure 2. Auxiliary Fuel Pump Wire Routing
Copyright 1999-2014 by MD Helicopters Inc.
This document may be reproduced and distributed provided no fee is charged,
the text is not modified, and this copyright notice is included.
• MANDATORY  MANDATORY

### Page 8 (OCR)

SB369H-255  SB369D-213
SB369E-111  SB369F-098  HELICOPTERS
SB500N-049
DATE: 30 APRIL 2014  SERVICE BULLETIN
PAGE 8 OF 10
MANDATORY  I MANDATORY /  MANDATORY
F. Perform a Fuel Quantity Sensor (Transmitter) Functional Check
NOTE: This functional check is not for fuel quantity indicating system accuracy, but to check proper fuel
float arm function.
(1). Do a fuel quantity sensor functional check. Refer to CSP-H-2, Section 12 or CSP-
HMI-2, Chapter 28-00-00.
G. Install the Warning Decal
(1). Clean the top of the LH fuel cell cover (6, Figure 2) using isopropyl alcohol and a clean
cloth.
(2). Install the warning decal (12) on the LH fuel cell cover (6).
(3). Edge seal (fillet) the decal (12) using MDM16-1068D, Class 8B, fast cure adhesive. The
fillet shall be 0.03 inch (0.8 mm) minimum and 0.13 inch (3.2 mm) maximum.
H. Service the Fuel System
(1). Make sure fuel system is properly serviced per SB369HN-185 and CSP-H-2 for 369H
Series helicopters and CSP-HMI-2 for 369D, 369E, 369F/FF, and 500N Series heli-
copters.
I. Job Close-Up
(1). Clean any fuel spillage using a clean cloth.
(2). Install the LH fuel access door assembly. Refer to CSP-H-2 for 369H Series helicopters
and CSP-HMI-2 for 369D, 369E, 369F/FF, and 500N Series helicopters.
J. Compliance Record
(1). Record compliance to this Service Bulletin in the Compliance Record section of the
Rotorcraft Log Book.
(2). Complete Bulletin Completed Record form (attached) and FAX or e-mail to MDHI Field
Service Department.
Copyright 1999-2014 by MD Helicopters Inc.
This document may be reproduced and distributed provided no fee is charged,
the text is not modified, and this copyright notice is included.
/ MANDATORY L  MANDATORY  I MANDATORY//

### Page 9 (OCR)

SB369H-255  SB369D-213
HELICOPTERS  SB369E-111  SB369F-098
SB500N-049
SERVICE BULLETIN  DATE: 30 APRIL 2014
PAGE 9 OF 10
MANDATORY  / MANDATORY  / MANDATORY
Bulletin Completed Record
ONE-TIME INSPECTION OF FUEL PUMP HARNESS ROUTING AND
DECAL INSTALLATION
MD Helicopters, Inc.
Field Service Department
4555 E. McDowell Road
Mesa, AZ 85215-9734
800-388-3378 Phone (U.S. and Canada)
480-346-6387 Phone (International)
480-346-6813 Fax
FAX this form to MDHI (480) 346-6813 or E-mail to ServiceEngineering@mdhelicopters.com
Owner  Helicopter
/Operator:  Serial No:
Helicopter
Address:  Total Time:
Date Complete:
Location:
Phone:
E-mail:
This bulletin is complete:
(Signature)
(Print Name)
(Title)
Comments:
Copyright 1999-2014 by MD Helicopters Inc.
This document may be reproduced and distributed provided no fee is charged,
the text is not modified, and this copyright notice is included.
MANDATORY  MANDATORY  MANDATORY

### Page 10 (OCR)

SB369H-255  SB369D-213
SB369E-111  SB369F-098  HELICOPTERS
SB500N-049
DATE: 30 APRIL 2014  SERVICE BULLETIN
PAGE 10 OF 10
/ MANDATORY /  MANDATORY  MANDATORY
This page intentionally left blank!
Copyright 1999-2014 by MD Helicopters Inc.
This document may be reproduced and distributed provided no fee is charged,
the text is not modified, and this copyright notice is included.
Л/ MANDATORY MANDATORY  ЛИЛЛИ mandatorY

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
