# Metro Aviation Alert Service Bulletin MA145-21B-003

Copy: Revision B ("Metro ASB MA145-21B-003 Rev B"), 5 pages: PDF https://openairdocs.org/files/sha256/3c/2b/3c2b3f91cafe2f9abd0538d3240e2e48cc63ed0ebe74b43b8e3264149bb5413d; text https://openairdocs.org/service-documents/metro-aviation/ma145-21b003/file/3c2b3f91cafe.md. Rights: © Metro Aviation. Filed by the FAA in regulations.gov docket FAA-2014-0395; AD 2014-06-51 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Metro Aviation](https://openairdocs.org/service-documents/metro-aviation.md)
- Type: Service bulletin (Alert Service Bulletin)
- Number: MA145-21B-003
- Latest revision known: MA145-21B-003, Revision B, dated December 20, 2013 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/metro-aviation/ma145-21b003

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2014-06-51](https://openairdocs.org/ad/2014-06-51.md), effective Jul 30, 2014: Revision B

## Text (5 pages)

Rights: © Metro Aviation. Filed by the FAA in regulations.gov docket FAA-2014-0395; AD 2014-06-51 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Metro Aviation, Inc. ASB Number:  MA145-21B-003 
Rev. B, 20 December 2013 Page 1 of 5 MA145-21B-003 
 
MBB-BK 117 C-2 (EC145) 
 
ALERT SERVICE BULLETIN 
 
 
SUBJECT: TAIL ROTOR SYSTEM  
 AIR CONDITIONING DRIVE PULLEY ATTACHMENT 
 
 
Revision Number Issue Date 
IR 23 April 2013 
A 26 April 2013 
B 20 December 2013 
 
 
Summary: 
 
Revision B of the Alert Service Bulletin details the procedure to install dual locking tabs 
on the existing EC145 air conditioning drive pulley attachment bolts. 
 
 
Reason for Revision: 
 
Please replace Revision A of Alert Service Bulletin MA145-21A-003 with Revision B 
(MA145-21B-003). 
 
 
Compliance: 
 
Compliance with this Alert Service Bulletin is prescribed in Section 1.E

### Page 2

Metro Aviation, Inc. ASB Number:  MA145-21B-003 
Rev. B, 20 December 2013 Page 2 of 5 MA145-21B-003 
 
MBB-BK 117 C-2 (EC145) 
 
ALERT SERVICE BULLETIN 
 
Air-Conditioning – Installation of Air-Conditioning Drive Pulley 
 
1. Planning Information 
A) Effectivity 
 
i) Helicopters affected:   Eurocopter MBB -BK 117 A-3, A -4, B -1, and C-2 (EC145) 
helicopters equipped with a Metro Aviation vapor-cycle air -conditioning kit  P/N 
117MM-100-2 STC#SH3880SW. 
 
ii) Components affected:  Metro Aviation vapor-cycle Air Conditioning drive pulley. 
 
iii) Spare Parts affected:  Not Applicable. 
 
B) Concurrent Requirements:  Not Applicable. 
 
C) Reason: To improved bolt retention with dual locking features 
 
D) Description:  This Alert Service Bulletin details the procedure to install a dual locking 
tab on the existing EC145 air conditioning drive pulley attachment bolts. 
 
E) Compliance:   
 
It is recommended that this service bulletin be incorporated within the next 10 flight 
hours.  This Service Bulletin supersedes ASB MA145-21A-003. 
 
NOTE: Compliance times are for aircraft operating time not Air Conditioner  
operating time. 
 
 
F) Approval:  Engineering aspects are approved by the FAA. 
 
G) Manpower:  Approximately 4.0 man-hours are required to add dual lock tabs. 
 
H) Weight and Balance:  Not Applicable. 
 
I) Electrical Load Data:  Not Applicable. 
 
J) Software Accomplishment Summary:  Not Applicable. 
 
K) References:  Metro Aviation, MBB -BK 117 C -2 (EC145) Vapor Cycle Air -Conditioner 
Equipment Maintenance Manual (117MM-100-02) & Installation drawing (117M-600-2). 
 
L) Other Publications affected:  Not Applicable.

### Page 3

Metro Aviation, Inc. ASB Number:  MA145-21B-003 
Rev. B, 20 December 2013 Page 3 of 5 MA145-21B-003 
 
M) Interchangeability of Parts:  Not Applicable. 
 
2. Material Information 
A) Material:  Three dual lock tabs (MAI-145-DUAL LOCK TAB) will be provided per aircraft 
at no cost until Dec. 31, 2014.  Fax a purchase order referencing the aircraft serial 
number and Alert Service Bulletin number to Metro Aviation at (318) 698-5206. 
 
B) Support Information:  Not Applicable. 
 
C) Material Necessary for Helicopter: 0.025” (0.62mm) stainless steel safety wire 
 
D) Material to be Returned:  Not Applicable. 
 
3. Accomplishment Instructions 
A) Remove Aircraft transmission and engine cowlings per AMM 71- 11-00 Section 4- 3 and 
4-4. 
 
CAUTION: Do not remove the Air Conditioning drive pulley mount bolts without first     
relieving tension from compressor drive belt. 
 
B) Remove one (of three) bolt sets that install the air conditioning compressor belt pulley to 
the rotor brake disc.  Note; do not remove all three sets at the same time. 
 
C) Discard AN960- 416 washer (originally installed under head of bolt securing pulley to 
rotor disc). 
 
D) Discard original lock tab P/N LN9023A10-1.4544.9 
 
E) Install dual lock tab as shown below in View A -A.  Reinstall bolts IAW EC145 
maintenance manual, Equipment Maintenance Manual 117MM -100-02, and drawing 
117M-600-2. 
 
F) Bend any two tabs (“A” Tabs and “B” Tabs) on each bolt that do not interfere with safety 
wire hole being used to secure the brake rotor disk bolts, as shown in View B -B.  The 
two tabs may be bent on the same side, or one each on opposing sides, as shown in 
Secondary Tab Bending.   Bend down remaining single tab (tab “C”) as s hown in View 
C-C. 
 
G) Safety wire bolts (using 0.025”  (0.6 mm) safety wire) as shown View B -B and IAW FAA 
AC 43.13 1 B Chapter 7, Section 7, Paragraphs 7- 122 through 7 -125.  Safety wire may 
wrap around bent tabs, as required. 
 
H) Repeat above procedure for the remaining two sets of bolts (one bolt set as a time). 
 
I) Reinstall Aircraft transmission and engine cowlings per AMM 71- 11-00 Section 4- 3 and 
4-4.

### Page 4

Metro Aviation, Inc. ASB Number:  MA145-21B-003 
Rev. B, 20 December 2013 Page 4 of 5 MA145-21B-003 
 
 
FIG 1 
 
 
 
 
 
 
 
 
 
 
 
 
 
COMPRESSOR BELT PULLEY 
BOLT SET 
(1 OF 3) 
ROTOR BRAKE DISC 
 
 
DUAL LOCK TAB 
 
VIEW A-A 
VIEW LOOKING FORWARD 
 
SAFETY WIRE 
(1 OF 3)

### Page 5

Metro Aviation, Inc. ASB Number:  MA145-21B-003 
Rev. B, 20 December 2013 Page 5 of 5 MA145-21B-003 
 
 
 
 
 
 
 
 
 
 
 
 
 
  
 
 
 
 
“B” TABS 
 
SECONDARY TAB BENDING 
BENT TAB 
BENT TAB 
BENT TAB 
BENT TAB 
TAB “C” 
BENT TABS 
“A” TABS 
 
 
 
 
BENT TAB BENT TABS 
VIEW B-B 
 
VIEW C-C 
TAB “C” 
ROTOR BRAKE DISC 
COMPRESSOR BELT PULLEY 
 
PRIMARY TAB BENDING 
SAFETY WIRE 
(1 OF 3)

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
