# Pacific Aerospace Mandatory Service Bulletin PACSB/FU/095

Copy: Revision 2 ("PACSB FU 095"), 2 pages: PDF https://openairdocs.org/files/sha256/00/73/0073e9ae98d81370870b373aa3c5b943e1e3c28d2feedeb54104bcf353c74dcb; text https://openairdocs.org/service-documents/pacific-aerospace/pacsb-fu-095/file/0073e9ae98d8.md. Rights: © Pacific Aerospace. Filed by the FAA in regulations.gov docket FAA-2014-0532; AD 2014-21-02 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Pacific Aerospace](https://openairdocs.org/service-documents/pacific-aerospace.md)
- Type: Service bulletin (Mandatory Service Bulletin)
- Number: PACSB/FU/095
- Latest revision known: PACSB/FU/095, Issue 2, dated May 28, 2014 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/pacific-aerospace/pacsb-fu-095

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2014-21-02](https://openairdocs.org/ad/2014-21-02.md), effective Nov 28, 2014: Revision 2

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/pacific-aerospace/pacsb-fu-095/proposed.md).

## Text (2 pages)

Rights: © Pacific Aerospace. Filed by the FAA in regulations.gov docket FAA-2014-0532; AD 2014-21-02 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

PACIFICAEROSPACE
Pacific Aerospace Limited  MANDATORY SERVICE
Airport Road, Hamilton
Private Bag 3027, Hamilton 3240, New Zealand
TEL +6478436144 FAX +6478436134
EMAIL pacific@aerospace.co.nz  PACSB / FU / 095
WEB www.aerospace.co.nz  ISSUE 2
CONTROL COLUMN CRACKING
1. PLANNING INFORMATION
A. EFFECTIVITY  All FU24 & FU24A series aircraft.
B. REASON  There has been one reported incident of cracking
of the Control Column due to mechanical damage
at the location of 5/16 dia hole for electrical wiring.
C. DESCRIPTION  Control Column (P/N 08-45031/32) to be inspected  N
for any cracking, mechanical damage or
modification at the location of 5/16 dia hole for
electrical wiring (refer to Figure 1).
D. COMPLIANCE  Before further flight, carry out Accomplishment
Instructions (Para 2.).
Thereafter refer to FU24 950 & 954 Maintenance
Manuals, Chapter 05, for the repetitive inspection
requirements of the control column.
E. TOOLING  No special tools are required
F. WEIGHT AND BALANCE  Not affected.
G. REFERENCE  FU24 & FU24A-950 / FU24 & FU24A-954
Maintenance Manual TR FU/MM/05/001.
H. HOURS REQUIRED  0.5 hours
I. WARRANTY COVER  Normal warranty conditions apply.
Issued: 28 May 2014  Page 1 of 2

### Page 2 (OCR)

PACIFICAEROSPACE  PACSB / FU / 095
ISSUE 2
2. ACCOMPLISHMENT INSTRUCTIONS
(Refer to Figure 1)
1)  Inspect Control Column for any cracks, mechanical damage or modification at the
location of 5/16 dia hole for electrical wiring.
2) If any cracks are found, replace the control column before further flight (refer to
applicable FU24 MM, Chapter 27).
3) If any mechanical damage or modifications are found, accomplish the following:
a)  Carry out a liquid penetrant inspection IAW ASTM E1417 (or equivalent approved
standard) of the control column at intervals not to exceed 50 hours TIS until
replacement.
b) Replace the control column at the next maintenance inspection, or within the next
150 hours TIS, whichever is the later.
NOTE:  Replacement of damaged or modified control columns is a
termination action to the repetitive NDT inspections required by
this SB.
08-45031/32
CONTROL COLUMN
5/16" DIA
HOLE
FIGURE 1 CONTROL COLUMN INSPECTION
3. CERTIFICATION
Record the compliance with this Service Bulletin in the Airframe Log Book.
4. MATERIAL REQUIRED:
N/A
Page 2 of 2  Issued: 28 May 2014

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
