# Piaggio Service Bulletin 80-0101: Revision ZZ

- Rights: © Piaggio. Filed by the FAA in regulations.gov docket FAA-2013-0472, the docket of AD 99-07-10 R1. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Piaggio Service Bulletin 80-0101](https://openairdocs.org/service-documents/piaggio/sb-80-0101.md)
- Title as filed: U.S. DOT/FAA - Piaggio Service Bulletin 80-0101 Rev ZZ
- Pages: 3
- PDF: https://openairdocs.org/files/sha256/f4/a7/f4a78eed576e9eb3baa6786ed7fd416c3f067a5ba3d55c81f92eae592b598dda
- Page: https://openairdocs.org/service-documents/piaggio/sb-80-0101/file/f4a78eed576e

## Text

This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

PIAGGIO  PIAGGIO AERO INDUSTRIES S.p.A.
AERO  Via Cibrario, 4 - 16154 Genoa, Italy
Product Support Department
The EASA states mandatory compliance with inspections, modifications or technical directives and
related time compliance by means of relevant Airworthiness Directives
SERVICE BULLETIN (MANDATORY) N.: 80-0101 REV ZZ ATA CHAPTER: 54-10-00
MODIFICATION N.: N/A
TITLE: ENGINE NACELLE INNER PANELS - INSPECTION
REVISION STATUS OF THE BULLETIN
This Bulletin is at the Revision ZZ status and consists of 3 pages.
This revision supersedes previous issues of this Service Bulletin.
This revision has been issued to cancel this Service Bulletin.
The parts which are affected by this revision are marked with a vertical line on the right side of the
Page.
No further action is required to operators that have already accomplished previous issues of this
Service Bulletin.
1. PLANNING INFORMATION
A. EFFECTIVITY
Service Bulletin cancelled: NA.
B. CONCURRENT REQUIREMENTS
Service Bulletin cancelled: NA.
C. REASON
Due to a possible nacelle panel inner film detachment, in correspondence of the engine
plenum chamber after a short in-service period, a visual inspection was required in
accordance with original issue of this Service Bulletin.
Following improvement in production, the inspection is no longer required.
D. DESCRIPTION
Service Bulletin cancelled: N/A.
E. COMPLIANCE
Service Bulletin cancelled: N/A.
Original Issue: May 06, 1998  Service Bulletin:  80-0101
Rev. N. ZZ  Date: February 19, 2013  Page:  1 of 3

### Page 2 (OCR)

PIAGGIO/  PIAGGIO AERO INDUSTRIES S.p.A.
AERO  Via Cibrario, 4 - 16154 Genoa, Italy
Product Support Department
F. APPROVAL
The technical content of this Service Bulletin has been approved under the Authority of
EASA DOA No EASA.21J.220.
G. MANPOWER
Service Bulletin cancelled: N/A.
H. TECHNICAL INFORMATION
For questions concerning the technical content of this Service Bulletin, please contact:
Piaggio Aero Industries - Product Support Department
Via Cibrario, 4 - 16154 Genoa, Italy
Fax No. : + 39 010 6481 374
E-mail: tech.support@piaggioaero.it
I. MATERIAL - COST AND AVAILABILITY
Service Bulletin cancelled: N/A.
J. TOOLING - COST AND AVAIL
N/A
K. WEIGHT AND BALANCE
N/A
L. ELECTRICAL LOAD DATA
N/A
M. REFEREYCES
N. PUBLICATIONS AFFECTED
2. ACCOMPLISHMENT INSTRUCTIONS
Service Bulletin cancelled: N/A.
Original Issue: May 06, 1998  Service Bulletin:  80-0101
Rev. N. ZZ  Date: February 19, 2013  Page:  2 of 3 |

### Page 3 (OCR)

PIAGGIO/  AERO  Via Cibrario, 4 - 16154 Genoa, Italy  PIAGGIO AERO INDUSTRIES S.p.A.
Product Support Department
3. MATERIAL INFORMATION
A. LIST OF MODIFICATION KIT COMPONENTS
N/A
B. LIST OF MATERIALS - OPERATOR SUPPLIED
N/A
C. LIST OF TOOLS
N/A.
D. DISPOSAL OF REMOVED PART
N/A
E. WARRANTY CREDIT PROGRAM
N/A
4. WARNING - PROPRIETARY RIGHTS
This bulletin contains proprietary information of Piaggio Aero Industries S.p.A. (PAI),
which PAI provides in confidence and solely for the purposes of supporting PAI products
and providing applicable information regarding the proper use, maintenance, inspection,
repair, servicing and parts application of PAI products. Neither this bulletin nor any
information in  may be disclosed to others, or used for any other purpose, including,
without limitation, to design, create, develop, reproduce, manufacture or derive any design,
part, product, material, process, modification, configuration change or repair, or obtain any
government approval to do so. This material is the exclusive property of Piaggio Aero
Industries SpA. and therefore shall not be reproduced, used or disclosed to others except
as authorized by contract with Piaggio Aero Industries S.p.A. or without the written
permission of Praggio Aero Industries S.p.A..
Original Issue: May 06, 1998  Service Bulletin:  80-0101
Rev. N. ZZ  Date: February 19, 2013  Page:  3 of 3

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
