# Piaggio Service Bulletin 80-0430: Revision 1

- Rights: © Piaggio. Filed by the FAA in regulations.gov docket FAA-2022-0452; AD 2022-19-07 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Piaggio Service Bulletin 80-0430](https://openairdocs.org/service-documents/piaggio/sb-80-0430.md)
- Title as filed: Piaggio SB 80-0430 Rev 1
- Pages: 16
- PDF: https://openairdocs.org/files/sha256/66/c9/66c99d7cebb15b8c09f55df2cf000e2387ac79ce96846f37b65a15a7cc8be5e6
- Page: https://openairdocs.org/service-documents/piaggio/sb-80-0430/file/66c99d7cebb1

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Original Issue: Aug. 10th, 2017 
 
Service Bulletin: 80-0430 
Rev.N.01  Date:  April. 30th, 2019 Page: 1 of 15 
Mod. PA_D007_ed_0 
PIAGGIO AVIATION S.p.A. 
Viale Generale Disegna, 1 - 17038 
Villanova d’Albenga (SV), ITALY. 
The EASA states mandatory compliance with inspections, modifications or technical directives and 
related time compliance by means of relevant Airworthiness Directives. 
SERVICE BULLETIN  (MANDATORY)  N.: 80-0430  REV.1  ATA CHAPTER: 30-30 
MODIFICATION N.: 80-1283; 80-1394 
TITLE: TAT PROBE HEATER INHIBITION ON GROUND  
REVISION STATUS OF THE BULLETIN 
This MANDATORY Service Bulletin (SB) is at Revision status 1 and consists of  15  pages, 
plus Confirmation Slip. 
This Service Bulletin is revised to: 
 extend Effectivity to all airplanes equipped with Magnaghi Landing Gear (§ 1.A., 1.B.); 
 update the Compliance (§ 1.E.); 
 update the accomplishment instructions with the label installation (§ 2.); 
 update the material information (§ 3.A.); 
 update format to current Piaggio Aviation publication standards. 
This Revison supersedes the original issue of this Service Bulletin. 
Operators in compliance with the original issue of this Service Bulletin are only required to 
perform the installation of the label in accordance with the instructions in § 2., step 23) of 
this SB: no further action is necessary. 
The parts which are affected by this Revision are marked with a vertical line on the right 
side of the Page. 
1. PLANNING INFORMATION 
A. EFFECTIVITY 
Piaggio Aero Industries (PAI) P180 Avanti II Manufacturer’s Serial Number (MSN): 
from 1002; 1105 thru 1234 and from 3001 thru 3007. 
B. CONCURRENT REQUIREMENTS 
PAI modification  no. 80-1089 “P180: New Nose Landing Gear System” (or Service 
Bulletin no. 80-0425 or no. 80 -0454) and no. 80 -1131 “P180: New Main Landing 
Gear System” (or Service Bulletin no. 80-0425 or no. 80 -0454) or modification no. 
80-1300 “Update of NLG Leg and MLG Leg (with S/A) P/Ns due to minor 
improvements” (or Service Bulletin no. 80-0425): embodied. 
C. REASON 
This MANDATORY Service Bulletin provides instructions to modify the TAT heater 
circuit in order to inhibit its engagement on ground when Pitot heater is turned ON.

### Page 2

Original Issue: Aug. 10th, 2017 
 
Service Bulletin: 80-0430 
Rev.N.01  Date:  April. 30th, 2019 Page: 2 of 15 
Mod. PA_D007_ed_0 
PIAGGIO AVIATION S.p.A. 
Viale Generale Disegna, 1 - 17038 
Villanova d’Albenga (SV), ITALY. 
D. DESCRIPTION 
General 
This MANDATORY Service Bulletin consists of the following: 
 removal of interiors in the flight compartment area (FR 0); 
 installation of relay support; 
 installation of new terminal juction boards; 
 installation of new relay; 
 modification of TAT heater electrical connections; 
 installation of the relevant label on the cockpit instrument panel; 
 installation of interiors in the flight compartment area. 
E. COMPLIANCE 
This MANDATORY Service Bulletin shall be accomplished within: 6 60 FH or 24 
months from the issue date of this Revision (whichever occurs first). 
In compliance with this Service Bulletin, please complete the attached  
Confirmation Slip and send it back to Piaggio Aviation S.p.A.. 
F. APPROVAL 
The technical conte nt of this Service Bulletin has been approved under the 
Authority of DOA No EASA.21J.685. 
G. MANPOWER 
This MANDATORY Service Bulletin shall be accomplished in approxim ately: 30 
man-hours (MH). 
NOTE: estimated man -hours do not include time necessary for removal/installation of 
interiors furnishing and to return the aircraft to a flyable status. 
H. TECHNICAL INFORMATION 
For questions concerning the technical content of this SB, please contact: 
Piaggio Aero Industries – P180 Customer Support 
Via Pionieri e Aviatori d’Italia, 2 - 16154 Genoa, Italy 
Fax No. :  (+ 39)  010 099 8400 
E-mail:   technicalsupport@piaggioaerospace.it 
I. MATERIAL – COST AND AVAILABILITY 
For pricing, availability and scheduling, please contact: 
- for customers and operators in Europe, Asia and RoW  
e-mail:    spareparts@piaggioaerospace.it

### Page 3

Original Issue: Aug. 10th, 2017 
 
Service Bulletin: 80-0430 
Rev.N.01  Date:  April. 30th, 2019 Page: 3 of 15 
Mod. PA_D007_ed_0 
PIAGGIO AVIATION S.p.A. 
Viale Generale Disegna, 1 - 17038 
Villanova d’Albenga (SV), ITALY. 
telephone:  (+39)  335 810 59 20 
- for customers and operators in the Americas 
e-mail:    spares@piaggioamerica.com 
telephone :  (+1)  561 253 0104 
fax:     (+1)  561 683 5513 
J. TOOLING – COST AND AVAILABILITY 
N/A 
K. WEIGHT AND BALANCE  
N/A 
L. ELECTRICAL LOAD DATA  
N/A 
M. REFERENCES 
Document Title Document Number Chapter/Section 
Airplane Maintenance Manual 
(AMM) 
180-MAN-0200-01105 
180-MAN-0200-01105(E) 
07-10-00 
08-20-00 
11-30-00 
20-10-02 
20-20-01 
24-00-00 
25-10-00 
33-20-00 
35-20-00 
33-41-00 
53-10-00 
53-60-00 
Illustrated Parts Catalogue 
(IPC) 
180-MAN-0100-01103 
180-MAN-0100-01103(E) 
25-28-01 
25-28-04 
25-28-08 
25-28-84 
Wiring Manual (WM) 180-MAN-0150-01104 
180-MAN-0150-01104(E) 
29-30-00 
30-30-00 
Airplane Flight Manual (AFM) 180-MAN-0010-01100 Section 4 – Normal Procedures 
 
N. PUBLICATIONS AFFECTED   
N/A

### Page 4

Original Issue: Aug. 10th, 2017 
 
Service Bulletin: 80-0430 
Rev.N.01  Date:  April. 30th, 2019 Page: 4 of 15 
Mod. PA_D007_ed_0 
PIAGGIO AVIATION S.p.A. 
Viale Generale Disegna, 1 - 17038 
Villanova d’Albenga (SV), ITALY. 
2. ACCOMPLISHMENT INSTRUCTIONS 
Procedure 
(1) Lift the aircraft on jacks (ref. to AMM TASK 07-10-00-500-801). 
(2) Remove the internal electrical power (ref. to AMM TASK 24-00-00-000-801). 
(3) Remove the Pilot and Copilot seats (ref. to AMM TASK 25-10-000-801). 
(4) Remove the flight compar tment furnishing and get access to the structural panels 
behind the instruments (ref. to AMM TASK 25-10-00-000-803 and to Fig. 1). 
(5) Remove the Pilot Central Panel (ref. to AMM TASK 31-10-00-000-805). 
 
 
Fig. 1 - Cockpit furnishing removal 
 
(6) Position the relay support P/N 81-111191-001 in its installation area (ref. to Fig. 2) 
(7) Mark in the structural central panel no. 2 holes existing on relay support P/N 81 -
111191-001 (ref. to Fig. 2). 
(8) Drill on structural central panel no. 2 holes previously marked. 
(9) Deburr the holes previously drilled. 
(10) Install on structural central panel inner surface (copilot side) the relay support P/N 
81-111191-001 using no.  2 screws P/N NAS1802 -06-6, no.2 washers P/N 
NAS1149DN816K and no. 2 nuts P/N MS21042-06 (ref. to Fig. 2)

### Page 5

Original Issue: Aug. 10th, 2017 
 
Service Bulletin: 80-0430 
Rev.N.01  Date:  April. 30th, 2019 Page: 5 of 15 
Mod. PA_D007_ed_0 
PIAGGIO AVIATION S.p.A. 
Viale Generale Disegna, 1 - 17038 
Villanova d’Albenga (SV), ITALY. 
(11) Install on relay support P/N 81-111191-001 the relay socket P/N M12883/55 -02 and 
the relay P/N M83536/37-003 (K6001) (ref. to Fig. 2). 
 
 
Fig. 2 – Relay support/Relay installation 
 
(12) Disconnect from pin “J” of Terminal Junction TJ6050 the wire number: 2930 -0072A-
UU22--G (ref. to Fig. 3). 
(13) Disconnect from connector P4076 pin “n” the wire number F025B16 or 3030-0003A-
UU16—D (ref. to Fig. 4a/4b). 
(14) Disconnect from connector P4075 pin “n” the wire number F026B16 or 3030-0022A-
UU16--D (ref. to Fig. 5a/5b). 
(15) Connect the wire num ber 2930 -0072A-UU22--G to pin “N” of Terminal Junction 
TJ4030 (ref. to Fig. 6).

### Page 6

Original Issue: Aug. 10th, 2017 
 
Service Bulletin: 80-0430 
Rev.N.01  Date:  April. 30th, 2019 Page: 6 of 15 
Mod. PA_D007_ed_0 
PIAGGIO AVIATION S.p.A. 
Viale Generale Disegna, 1 - 17038 
Villanova d’Albenga (SV), ITALY. 
(16) Connect the wire number F025B16 (or 3030-0003A-UU16—D) to relay K6001 pin 
“A3” (ref. to Fig. 7). 
Note 1: since the cable on board is short, join it with a splice to the cable F025B16 
parts of kit P/N 81M000001-401. 
(17) Connect the wire number F026B16 (or 3030-0022A-UU16--D) to Terminal Junction 
TJ4036 pin “F” (ref. to Fig. 8). 
Note 2: since the cable on board is short, join it with a splice to the cable F026B16 
P/N 81M000001-401. 
(18) Install on board the wire number 3030 -0022B-UU16--D (part of kit P/N 81M000001-
401) and connect it from connector P4075 pin “n” to Terminal Junction TJ4036 pin D 
(ref. to Fig. 8). 
(19) Install on board the wire number 3030-0022C-UU16--D (part of kit P/N 81M000001 -
401) and connect it from Terminal Junction TJ4036 pin “B” to Relay K6001 pin “X1” 
(ref. to Fig. 8). 
(20) Install on board the wire number 3030-0027A-UU20--G (part of kit P/N 81M000001 -
401) and connect it from Terminal Junction TJ4030 pin “P” to Relay K6001 pin “X2” 
(ref. to Fig. 7). 
(21) Install on board the wire number 3030-0026A-UU16--D (part of kit P/N 81M000001 -
401) and connect it from connector P407 6 pin “n” to Relay K6001 pin “A2”  (ref. to 
Fig. 7).

### Page 7

Original Issue: Aug. 10th, 2017 
 
Service Bulletin: 80-0430 
Rev.N.01  Date:  April. 30th, 2019 Page: 7 of 15 
Mod. PA_D007_ed_0 
PIAGGIO AVIATION S.p.A. 
Viale Generale Disegna, 1 - 17038 
Villanova d’Albenga (SV), ITALY. 
 
 
 
Fig. 3 – Nose PSEU electrical coonnections: pre-mod

### Page 8 (OCR)

PIAGGIO AVIATION S.p.A.
PRACIO T  AVIATION  Viale Generale Disegna, 1 - 17038
Villanova d'Albenga (SV), ITALY.
E4013
CENTRAL CTRL PNL
P4076  J2
F025B16
E4015
ANNUNCIATOR PNL  F005B20  +28VDC AOA PROBE HTR
F007A16  +28VDC R STATIC HTR
J2  P4080  F015B16  R PITOT/STATIC HTR PWR
F016A20  +28VDC R PITOT HTR
F025B16  +28VDC TAT SENSOR HTR
R PITOT HTR  123-  - F018A22  F018A22  R PITOT HTR FAIL
F022A22N  R PITOT HTR FAIL GND
Fig. 4a - Central Control Panel - electrical connections: pre-mod (Part 1 of 2)
• 3030-0003A-UU16-D
3160
214
E4013
CENTRAL CTRL PNL  2110
J2  P4076  BKS
P4078
•SEVDC TAT SENSOR HTF
28VDC R PITOT HTR
R PITOT/STATIC HER DWE  - 2800-0005A-UU16-D
+28VDC R STATIC HTR  • 3030-0006A-UU16--G
+28VDC AOA PROBE HTR.  • 3030-0012A-UU20-D
R PITOT HTR FAIL.  —• 3030-0013A-UU22--G-
9700
R PITOT HTR FAIL GND.  F  • 3030-0014A-UU22-CG-13-11  G4004  212
Fig. 4b - Central Control Panel - electrical connections: pre-mod (Part 1 of 2)
Original Issue: Aug. 10th, 2017  Service Bulletin:  80-0430
Rev.N.01  Date: April. 30th, 2019  Page:  8 of 15
Mod. PA_D007_ed_0

### Page 9 (OCR)

PIAGGIO AVIATION S.p.A.
PLACIO TO  AVIATION  Viale Generale Disegna, 1 - 17038
Villanova d'Albenga (SV), ITALY.
P4079  G4004  P4075
FQ19A22  F019A22  L PITOT HTR FAIL
PITOT HTR
F003B18  L PITOT/STATIS HTR PWR
F0Q2B20  AOA PROBE HTR PWR
- 026B16  TAT SENSOR HTR PVR
F004A20  +28VDC L STATIC HTR
5023A22N  DITST  HIR FAIL GND
G4003 I
SP4045
F004A20
SP4046
- F008A20N •
HR3
P4005  _ INSTRUMEN  STATIC POR
g9rm
Fig. 5a - Central Control Panel - electrical connections: pre-mod (Part 2 of 2)
2110
214
J1  P4075  BKS
P4076
L PITOT HTR FAIL.  • 3030-0015A-UU22--G-
+28VDC L STATIC HTR-  c  • 3030-0016A-UU20--G
3112
215
BKS  P4005
P4005
L PITOT/STATIC HIR WRI  • 3030-0019A-UU20--G
• 3030-0020A-UU18-D
AOA PROBE HTR  • 3030-0021A-UU20-D
TAT SENSOR HTR PWRJ  • 3030-0022A-UU16-D
L PITOT HTR FAIL GND.  • 3030-0023A-UU22-CG-  9700
211
+28VDC L PITOT HTR  D  G4003
Fig. 5b - Central Control Panel - electrical connections: pre-mod (Part 2 of 2)
Original Issue:  Aug. 10th, 2017  Service Bulletin:  80-0430
Rev.N.01  Date: April. 30th, 2019  Page:  9 of 15
Mod. PA_D007_ed_0

### Page 10

Original Issue: Aug. 10th, 2017 
 
Service Bulletin: 80-0430 
Rev.N.01  Date:  April. 30th, 2019 Page: 10 of 15 
Mod. PA_D007_ed_0 
PIAGGIO AVIATION S.p.A. 
Viale Generale Disegna, 1 - 17038 
Villanova d’Albenga (SV), ITALY. 
 
 
 
 
 
 
 
Fig. 6 – Nose PSEU electrical connections: post-mod

### Page 11 (OCR)

PIAGGIO AVIATION S.p.A.
Viale Generale Disegna, 1 - 17038
Villanova d'Albenga (SV), ITALY.
2732  3030  225
225
K6001
TJ4030
81-008002 - HYDRAULIC LDG GEAR POSITION 2>  # 3030-0027A-UU20--G
X1
F025B16 or
= 3030-0003A-UU16--D
3160
21+
E4013
CENTRAL CTRL PNL  2110
214
J2  P4076
+28VDC TAT SENSOR HTR  +28VDC R PITOT HTR  • 3030-0026A-UU16--D  • 3030-0001A-UU20--G
R PITOT/STATIC HTR PWR  • 3030-0005A-UU16--D
+28VDC R STATIC HTR  = 3030-0006A-UU16-G
+28VDC AOA PROBE HTR  = 3030-0012A-UU20--D
R PITOT HTR FAIL _  • 3030-0013A-UU22--G-
R PITOT HTR FAIL GND  F  + 3030-0014A-UU22-CG-LI1
9700
212
G4004
Fig. 7 - Central Control Panel/Relay K6001 - electrical connections: post-mod
(Part 1 of 2)
Original Issue:  Aug. 10th, 2017  Service Bulletin:  80-0430
Rev.N.01  Date: April. 30th, 2019  Page:  11 of 15
Mod. PA_D007_ed_0

### Page 12 (OCR)

PIAGGIO AVIATION S.p.A.
PIAGGIO  AVIATION  Viale Generale Disegna, 1 - 17038
Villanova d'Albenga (SV), ITALY.
J1  P4075  BKS
P4075
L PITOT HTR FAIL.  = 3030-0015A-UU22--G
CENTRAL
CONTROL
PANEL  TO RELAY K6001 PIN "X1"
+28VDC L STATIC HTR  = 3030-0016A-UU20-G-
3112
215
BKS P4005
P4005
* 3030-0019A-UU20--G-
L PITO T/STATIC HTR PWR  = 3030-0020A-UU18--D  g
AC A PROBE HTR PWR  = 3030-0021A-UU20--D
TAT SENSOR HTR PWR  • 3030-0022B-UU16--D
L PITOT HTR FAIL GND .  • 3030-0023A-UU22-CG-R  3311  225
+28VDC PITOT HTR  9700  211  LABEL  TJ4036
G4003
F026B16 or
* 3030-0022A-UU16-D
Fig. 8 - Central Control Panel/ Relay K6001 - electrical connections: post-mod
(Part 2 of 2)
LABEL P/N 81-11/017-001
A/C CONFIGURATION ALLOWS PITOT HEATERS
SWITCH ON DURING GROUND OPERATIONS
(REF. AFM SEC. 4)
i30
Fig. 9 - Label P/N 81-111017-001 installation
Original Issue:  Aug. 10th, 2017  Service Bulletin:  80-0430
Rev.N. 01  Date: April. 30th, 2019  Page:  12 of 15
Mod. PA_D007_ed_0

### Page 13

Original Issue: Aug. 10th, 2017 
 
Service Bulletin: 80-0430 
Rev.N.01  Date:  April. 30th, 2019 Page: 13 of 15 
Mod. PA_D007_ed_0 
PIAGGIO AVIATION S.p.A. 
Viale Generale Disegna, 1 - 17038 
Villanova d’Albenga (SV), ITALY. 
 
 
(22) Install the Pilot Central Panel (ref. to AMM TASK 31-10-00-000-805). 
(23) Referring to Fig. 9 and in accordance with AMM Chap. 11 -30-00, install the label 
P/N 81-11I017-001 on the cockpit instrument panel (pilot’s side) Fig.9. 
CAUTION: The nose landing gear weight switch must emulate the weight on the Landing 
Gear to perform the test. 
(24) Restore the internal electrical power (ref. to AMM TASK 24-00-00-400-801). 
(25) Remove aircraft from jacks (ref. to AMM TASK 07 -10-00-500-802). Perform a 
Pitot/Static HTR R operational test and verify that the TAT probe heater is not  
energized when Pitot/Static HTR R is turned ON (ref. to AMM TASK 30 -30-00-
710-801). 
(26) Remove the internal electrical power (ref. to AMM TASK 24-00-00-000-801). 
(27) Install the flight compartment furnishing (ref. to AMM TASK 25 -10-00-400-803 
and to Fig. 1). 
(28) Install the Pilot and Copilot seats (ref. to AMM TASK 25-10-400-801). 
(29) Restore the internal electrical power (ref. to AMM TASK 24-00-00-400-801). 
(30) Fill the attached Confirmation Slip and send it back to Piaggio Aero 
Industries S.p.A. – Product Support Department. 
(31) Make an opportune entry in the airplane logbo ok to show compliance with 
Service Bulletin.

### Page 14

Original Issue: Aug. 10th, 2017 
 
Service Bulletin: 80-0430 
Rev.N.01  Date:  April. 30th, 2019 Page: 14 of 15 
Mod. PA_D007_ed_0 
PIAGGIO AVIATION S.p.A. 
Viale Generale Disegna, 1 - 17038 
Villanova d’Albenga (SV), ITALY. 
3. MATERIAL INFORMATION 
A. LIST OF MODIFICATION KIT COMPONENTS 
Part/Number Specification Supplier Q.ty Type Designation 
SB 80-0430 Rev.1 Piaggio Aero Ind. 1 Kit Kit Service Bulletin  
1 81-111191-001 Piaggio Aero Ind. 1 Part Relay support 
2 NAS1802-06-6 Piaggio Aero Ind. 2 Part Screw 
3 NAS1149DN816K Piaggio Aero Ind. 2 Part Washer 
4 MS21042-06 Piaggio Aero Ind. 2 Part Nut 
5 M83536/37-003 Piaggio Aero Ind. 1 Part Relay 
6 M12883/55-02 Piaggio Aero Ind. 1 Part Relay Socket 
7 81-118017-023 Piaggio Aero Ind. 1 Part Label (K6001) 
8 CM-SCE-1/2-6H-9 Piaggio Aero Ind. 1 Part Wire identification 
9 81M000001-401* Piaggio Aero Ind. 1 Kit Wires kit 
10 M39029/56-352 Piaggio Aero Ind. 2 Part Pin 
11 001104-300-02 Piaggio Aero Ind. 2 Part Pin 
12 M39029/5-116 Piaggio Aero Ind. 2 Part Pin 
13 001104-203-02 Piaggio Aero Ind. 2 Part Pin 
14 M39029/92-533 Piaggio Aero Ind. 6 Part Pin 
15 81-11I017-001 Piaggio Aero Ind. 1 Part Label  
16 M7928/5-4 Piaggio Aero Ind. 2 Part Splice 
 (*) Wires kit composed by: 
 3030-0022B-UU16--D    q.ty 1 
 3030-0022C-UU16--D    q.ty 1 
 3030-0027A-UU20--G    q.ty 1 
 3030-0026A-UU16--D    q.ty 1 
 F025B16                            q.ty 1 
 F026B16                            q.ty 1 
B. LIST OF MATERIALS – OPERATOR SUPPLIED 
N/A  
C. LIST OF TOOLS 
N/A 
D. DISPOSAL OF REMOVED PART 
N/A 
E. WARRANTY CREDIT PROGRAM 
N/A

### Page 15

Original Issue: Aug. 10th, 2017 
 
Service Bulletin: 80-0430 
Rev.N.01  Date:  April. 30th, 2019 Page: 15 of 15 
Mod. PA_D007_ed_0 
PIAGGIO AVIATION S.p.A. 
Viale Generale Disegna, 1 - 17038 
Villanova d’Albenga (SV), ITALY. 
4. WARNING - PROPRIETARY RIGHTS 
This bulletin contains proprietary information of Piaggio Aviation S.p.A. (PA), which 
PA provides in confidence and solely for the purp oses of supporting PA products 
and providing applicable information regarding the proper use, maintenance, 
inspection, repair, servicing and parts application of PA products. Neither this 
bulletin nor any information in it may be disclosed to others, or us ed for any other 
purpose, including, without limitation, to design, create, develop, reproduce, 
manufacture or derive any design, part, product, material, process, modification, 
configuration change or repair, or obtain any government approval to do so. Th is 
material is the exclusive property of Piaggio Aviation S.p.A. and therefore shall not 
be reproduced, used or disclosed to others except as authorized by contract with 
Piaggio Aviation S.p.A. or without the written permission of Piaggio Aviation S.p.A.

### Page 16

Mod. PA_D007_ed_0 
PIAGGIO AVIATION S.p.A. 
Viale Generale Disegna, 1 - 17038 
Villanova d’Albenga (SV), ITALY. 
 
CONFIRMATION SLIP 
 
Service Bulletin Accomplishment SB-80-0430  Rev.01 
A/C  S/N: 
 
 
A/C Flight Hours: 
 
 
A/C LGDS: 
 
 
A/C Registration: 
 
 
Date: 
Accomplished by: 
Signature

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
