# Pilatus Service Bulletin PC-6 55-004: No revision named

- Rights: © Pilatus Aircraft Ltd. Filed by the FAA in regulations.gov docket FAA-2018-1058; AD 2019-10-07 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Pilatus Service Bulletin PC-6 55-004](https://openairdocs.org/service-documents/pilatus/pc6-55-004.md)
- Title as filed: PC-6_SB_55-004
- Pages: 22
- PDF: https://openairdocs.org/files/sha256/f4/51/f451fa3fb8b32dbd6951469d1326a3df0ae8cbfd5082aa4a30bc6e831781e9d5
- Page: https://openairdocs.org/service-documents/pilatus/pc6-55-004/file/f451fa3fb8b3

## Text

This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

(No text on this page.)

### Page 2

(No text on this page.)

### Page 3

(No text on this page.)

### Page 4

(No text on this page.)

### Page 5

(No text on this page.)

### Page 6

(No text on this page.)

### Page 7

(No text on this page.)

### Page 8

(No text on this page.)

### Page 9

(No text on this page.)

### Page 10

(No text on this page.)

### Page 11

(No text on this page.)

### Page 12

(No text on this page.)

### Page 13

(No text on this page.)

### Page 14

(No text on this page.)

### Page 15

(No text on this page.)

### Page 16

(No text on this page.)

### Page 17

(No text on this page.)

### Page 18

(No text on this page.)

### Page 19 (OCR)

EPILATUSE  SERVICE BULLETIN
PC-6
B
B
HINGE
BRACKETS
HINGE
BRACKETS
LH SHOWN  LH SHOWN
(OFF AIRCRAFT)  (ON AIRCRAFT)
RH SIMILAR  RH SIMILAR
Horizontal Stabilizer - Hinge Bracket Assy - Inspection and Fastener Replacement
Figure 1 (Sheet 1 of 2)
Service Bulletin No:  55-004  Date:  Jul 02/18
Rev. No.  Page 19 of 22

### Page 20

(No text on this page.)

### Page 21 (OCR)

EPILATUSE  SERVICE BULLETIN
PC-6
TYPICAL
LH SHOWN RH SIMILAR
(OFF AIRCRAFT)
HINGE
BRACKETS
REMOVE
RIVETS
REMOVE
RIVETS
LOOKING AFT
15 + 0.2, - 0 mm  15 + 0.2, - 0 mm
MINIMUM CLEARANCE
(0.5914 + 0.008, - 0 in.)  (0.5914 + 0.008, - 0 in.)
HEIGHT 28 mm (1.102 in.)
BOLT
374,6 mm (14.748 in.)
DIAMETER 8 mm (0.315 in.)  DIAMETER 8 mm (0.315 in.)
WASHER  NUT AND  CLEARANCE HOLES IN ALIGNMENT  CLEARANCE HOLES IN ALIGNMENT  SB 3066
Hinge Bracket - Replacement and Installation Jig Detail
Figure 2
Service Bulletin No:  55-004  Date:  Jul 02/18
Rev. No.  Page  21 of 22

### Page 22

(No text on this page.)

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.