# Pratt & Whitney Canada Service Bulletin PT6A-72-1669

## Copies (2)

Copies the FAA filed in AD dockets on regulations.gov, newest revision first. A newer revision may exist.

- Revision 9 ("PWC PT6A-72-1669 Revision 9"), 14 pages: PDF https://openairdocs.org/files/sha256/d9/35/d93513a5a09d3860fb1c66ba4660a5cd66fa756300c9c74d9504ee6fbfaa8008; text https://openairdocs.org/service-documents/pratt-whitney-canada/pt6a-72-1669/file/d93513a5a09d.md. Rights: © Pratt & Whitney Canada. Filed by the FAA in regulations.gov docket FAA-2020-0692, the docket of AD 2022-08-13. Not covered by OpenAirDocs’ CC0 dedication.
- PWC  PT6A-72-1669 ("PWC  PT6A-72-1669"), 14 pages: PDF https://openairdocs.org/files/sha256/d8/e6/d8e6be5d21b2777376551c46e8a8ae814e07792e8be775cb5570e2cc22863b80; text https://openairdocs.org/service-documents/pratt-whitney-canada/pt6a-72-1669/file/d8e6be5d21b2.md. Rights: © Pratt & Whitney Canada. Filed by the FAA in regulations.gov docket FAA-2013-0766; AD 2014-17-08, 2014-17-08 R1 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Pratt & Whitney Canada](https://openairdocs.org/service-documents/pratt-whitney-canada.md)
- Type: Service bulletin (Service Bulletin)
- Number: PT6A-72-1669
- Latest revision known: PT6A-72-1669, Revision 9, dated June 28, 2013 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/pratt-whitney-canada/pt6a-72-1669

## ADs that cite it (3) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2022-08-13](https://openairdocs.org/ad/2022-08-13.md), effective May 27, 2022: No revision named
- [AD 2014-17-08 R1](https://openairdocs.org/ad/2014-17-08-R1.md), effective Jun 5, 2015: Revision 9
- [AD 2014-17-08](https://openairdocs.org/ad/2014-17-08.md), effective Oct 8, 2014: Revisions 8 and 9

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/pratt-whitney-canada/pt6a-72-1669/proposed.md).

## Text (14 pages)

Revision 9, the newest copy. Rights: © Pratt & Whitney Canada. Filed by the FAA in regulations.gov docket FAA-2020-0692, the docket of AD 2022-08-13. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

BULLETIN INDEX LOCATOR
72-50-02
TURBOPROP ENGINE
COMPRESSOR TURBINE BLADES - INSPECTION/REPLACEMENT OF
MODEL APPLICATION
PT6A-114, PT6A-114A
Commercial Support Program No: 1004551
Compliance: 3, 3, 3
Summary: There can be blade creep at the compressor turbine area when the engine is
operated at higher temperatures and power than the Pilot Operating Handbook (POH)
recommended power settings.
T o prevent creep-related events, this service bulletin introduces:
v a borescope inspection for Pre-SB1669 blades.
v a metallurgical evaluation of a sample of Pre-SB1669 blades at HSI; or
v a new compressor turbine disk balancing assembly which incorporates redesigned
turbine blades made from a different material.
PRATT & WHITNEY CANADA
SERVICE BULLETIN
P&WC S.B. No. 1669R9
Jul 22/2008 PT6A-72-1669
Revision No. 9: Jun 28/2013 Cover Sheet
24-Hour Global Service USA & CANADA........................ 1-800-268-8000 Other .......................................... 1-450-647-8000
CFIRST CENTRE International .................... (IAC*)+8000-268-8000 Fax ............................................. 1-450-647-2888
Toll free where available (SIL GEN-027) * International Access Code Web Site .................................. www.pwc.ca

### Page 2

WARNING - PROPRIETARY RIGHTS & EXPORT CONTROLS NOTICE
This bulletin contains proprietary information of Pratt & Whitney Canada Corp. ( ″P&WC″), which
P&WC provides in conﬁdence and solely for the purposes of supporting engine certiﬁcation and
providing applicable information regarding the proper use, maintenance, inspection, repair, servicing
and parts application of P&WC products and services, as directed therein. Neither this bulletin nor
any information in it may be disclosed to others, or used for any other purpose, including, without
limitation, to design, create, develop, reproduce, manufacture or derive any design, part, product,
material, process, modiﬁcation, conﬁguration change or repair, or obtain FAA or other government
approval to do so. Possession and use of this bulletin is also subject to the restrictions set out in
P&WC’s T echnical Data Agreement (a copy of which may be obtained by contacting P&WC T echnical
Publications). The contents of this bulletin may be subject to export control laws. Unauthorized export
or re-export of the bulletin, or parts thereof, is prohibited. By accepting and possessing this bulletin,
you agree to be bound by the foregoing terms.
If a Government agency or department intends to disclose any information, written notice should be
given to:
VP - Legal Services, Pratt & Whitney Canada Corp., 1000 Marie-Victorin (01BE5), Longueuil,
Quebec J4G 1A1.
Export Control Classiﬁcation
*Data is subject to the jurisdiction of the Export and Import
Controls Bureau of the Department of Foreign Affairs and
International Trade of Canada, Department of Commerce
of the United States and/or Department of State of the
United States.
** Data is not subject to the jurisdiction of the Department
of Commerce of the United States or Department of State
of the United States but would become subject if exposed
to any US involvement.
Regulation Classiﬁcation
Number
Canadian ECL(s)*
ECCN(s)*
P-ECCN(s)** 9E991
USML (ITAR)*
P-USML**

### Page 3

REVISION TRANSMITTAL SHEET
TURBOPROP ENGINE MODEL PT6A
SUBJECT : Pratt & Whitney Canada Service Bulletin No. PT6A-72-1669, Rev. No. 9, dated Jun
28/2013 (P&WC S.B. No. 1669R9) COMPRESSOR TURBINE BLADES - INSPECTION/
REPLACEMENT OF
Replace your existing copy of this service bulletin with the attached revised bulletin. Destroy the
superseded copy.
Please retain this Revision Transmittal Sheet with the revised bulletin.
SUMMARY: This revision is issued to:
v add the Engine Serial Numbers in Para. 1.A., Effectivity.
v add CT Blade Trailing Edge Borescope inspection;
v add a two-CT blade sample for metallurgical evaluation at an overhaul facility.
v modify the compliance code to read 3.
v change the part replacement code from the disk to read 07 in lieu of 02.
EFFECT OF REVISION ON PRIOR ACCOMPLISHMENT :
None.
NOTE: A black bar in the left margin indicates a change in that line of text or ﬁgure.
REVISION HISTORY:
Original Issue: Jul 22/2008
Revision No. 1: Jul 25/2008
Revision No. 2: Aug 15/2008
Revision No. 3: Sep 08/2008
Revision No. 4: May 05/2009
Revision No. 5: Jun 11/2009
Revision No. 6: Jul 14/2009
Revision No. 7: Jun 19/2012
Revision No. 8: Jan 17/2013
Revision No. 9: Jun 28/2013
Pratt & Whitney Canada Corp.
1000, Marie-Victorin
Longueuil, Québec, Canada J4G 1A1
Tél. 450-677-9411
28 June 2013
P&WC S.B. No. 1669R9

### Page 4

(No text on this page.)

### Page 5

1. Planning Information
A. Effectivity
PT6A-114 Engines which include Serial No. PCE-17001 thru PCE-17495.
PT6A-114A Engines Serial No. which are before and include PC1611, PCE-19101 thru
PCE-19402 and excluding PCE-PC0463, PC0720, PC1266, PC1382, PC1476 and
PC1563.
B. Concurrent Requirements
None.
C. Reason
(1) Problem
There can be blade creep at the Compressor Turbine (CT) area.
(2) Cause
The engine may have been operated at a higher temperature and higher power
than the recommended power settings in the pilot operating handbook.
(3) Solution
Introduce an inspection and a metallurgical evaluation of Pre-SB1669 blades or
incorporate a new CT disk balancing assembly which incorporates redesigned turbine
blades made from a different material.
D. Description
This service bulletin is:
v (Part A) For engines not incorporating Part C, perform a borescope inspection of the
CT blades trailing edge at each fuel nozzle inspection to a maximum of 400 Hrs.
v (Part B) For engines not incorporating Part C, submit a two-CT blade sample for
metallurgical evaluation at an overhaul facility at HSI (Ref. P&WC SB No. 1703).
v (Part C) Replacing the CT disk balancing assembly or replacing the compressor turbine
blades with new ones and re-identify the CT disk balancing assembly.
E. Compliance
For CT Blade Trailing Edge Borescope inspection of (Part A):
CATEGORY 3 - P&WC recommends to Inspect in conjunction with each fuel nozzle
inspection, to a maximum of 400 hrs.
NOTE: Accomplishment of the borescope inspection is recommended within 150 Hrs of
issuance of this revision, if not conducted at previous nozzle inspection.
P&WC No. D9297J, D9297K, DCR5948, DCR5994, DCR6780, D9297R, DCR18946, E5427A,
DCR21872, DCR22576, DCR23014
PRATT & WHITNEY CANADA
SERVICE BULLETIN
P&WC S.B. No. 1669R9
P&WC Proprietary Information. Subject to the restrictions on the back of the locator
The export control classiﬁcation with respect to this document is contained on the back of the locator.Jul 22/2008 PT6A-72-1669
Revision No. 9: Jun 28/2013 Page 1 of 10© 2008 Pratt & Whitney Canada Corp.
PRINTED IN CANADA
TURBOPROP ENGINE
COMPRESSOR TURBINE BLADES - INSPECTION/REPLACEMENT OF

### Page 6

1. Planning Information (Cont’d)
For engines at HSI (Part B):
CATEGORY 3 - P&WC recommends to submit a two-CT blade sample for metallurgical
evaluation at an overhaul facility (Ref. P&WC SB No. 1703).
For CT blades replacement of (Part C):
CATEGORY 3 - P&WC recommends to do this service bulletin when the engine is
disassembled and access is available to the necessary subassembly
(i.e. module, accessories, components, or build groups). Do all spare
subassemblies, but not to exceed 36 months from the date of issue
of this revision.
F . Approval
D.O.T ./D.A.A. approved.
G. Manpower
For CT blades borescope inspection:
Once you have access to the part, an estimate of 4.0 man-hours is required to include
this service bulletin at maintenance.
For engines at HSI:
Once you have access to the part, an estimate of 4.0 man-hours is required to include
this service bulletin at maintenance.
For CT blades replacement:
Once you have access to the part, an estimate of 8.0 man-hours is required to include
this service bulletin at maintenance.
For Disk Balancing Assy-Compressor Turbine replacement:
Once you have access to the part, an estimate of 1.0 man-hours is required to include
this service bulletin at maintenance.
H. Weight and Balance
None.
I. Electrical Load Data
Not changed.
PRATT & WHITNEY CANADA
SERVICE BULLETIN
P&WC S.B. No. 1669R9
P&WC Proprietary Information. Subject to the restrictions on the back of the locator
The export control classiﬁcation with respect to this document is contained on the back of the locator.Jul 22/2008 PT6A-72-1669
Revision No. 9: Jun 28/2013 Page 2 of 10
TURBOPROP ENGINE
COMPRESSOR TURBINE BLADES - INSPECTION/REPLACEMENT OF

### Page 7

1. Planning Information (Cont’d)
J. Software Accomplishment Summary
Not applicable.
K. References
Illustrated Parts Catalog P/N 3043514 (PT6A-114, PT6A-114A, PT6A-135, PT6A-135A)
Maintenance Manual P/N 3043512 (PT6A-114, PT6A-114A, PT6A-135, PT6A-135A)
Overhaul Manual P/N 3021243 (PT6A-34, PT6A-34AG, PT6A-34B, PT6A-35, PT6A-36,
PT6A-114, PT6A-114A, PT6A-135, PT6A-135A)
P&WC S.B. No. 1703
L. Publications Affected
Illustrated Parts Catalog P/N 3043514 (PT6A-114, PT6A-114A, PT6A-135, PT6A-135A)
M. Interchangeability and Intermixability of Parts
Interchangeability - Refer to Para. 2.C.
Intermixability - Not intermixable, must be replaced as a complete set.
2. Material Information
A. Industry Support Information
Refer to Commercial Support Program Notiﬁcation 1004551.
B. Material - Cost and Availability
You can get the procurable parts listed in Para. 2.C. from any Pratt & Whitney Canada
Parts Distribution Center.
The estimated total cost of new parts needed to replace old parts is $Quote (US, 2008).
The new parts are scheduled to be available in (June 2009).
PRATT & WHITNEY CANADA
SERVICE BULLETIN
P&WC S.B. No. 1669R9
P&WC Proprietary Information. Subject to the restrictions on the back of the locator
The export control classiﬁcation with respect to this document is contained on the back of the locator.Jul 22/2008 PT6A-72-1669
Revision No. 9: Jun 28/2013 Page 3 of 10
TURBOPROP ENGINE
COMPRESSOR TURBINE BLADES - INSPECTION/REPLACEMENT OF

### Page 8

C. Material Necessary for Each Engine
The quantity of materials listed in this section is on a per Engine basis.
New P/N Keyword Old P/N Qty
Est. Unit
List Price
($US,
2008)
Instructions
Disposition
3072801-01 Disk Balancing Assy-
Compressor Turbine
3045761-01 1 Quote (A)(B)
3072791-01 Ê Blade-Turbine 3045741-01 58 Quote (C)(D)
For post P&WC S.B. No. 1455 engines.
3072801-01 Disk Balancing Assy-
Compressor Turbine
3102421-01 1 Quote (A)(B)
3072791-01 Ê Blade-Turbine 3039901 58 Quote (C)(D)
For pre P&WC S.B. No. 1521 engines.
3072801-01 Disk Balancing Assy-
Compressor Turbine
3102421-01 1 Quote (A)(B)
3072791-01 Ê Blade-Turbine 3102401-01 58 Quote (C)(D)
(A) RESTRICTED INTERCHANGEABILITY - (ATA 200 Explanation Code 07):
The old and the new part must be replaced by the new part.
(B) T o get the new part it is possible to make a modiﬁcation to the old part, or you can get the
new part from any Pratt & Whitney Canada Distribution Center.
(C) INTERCHANGEABLE AS A SET - (ATA 200 Explanation Code 06):
When the replacement set is a single part number, the old and the new parts are
interchangeable in complete sets only.
(D) Subject to metallurgical evaluation, blades removed in compliance with Part B may be
replaced with the same Part Number prior to incorporation of Part C.
D. Reidentiﬁed Parts
The following list of parts can be reworked:
OLD P/N NEW P/N
3045761-01 3072801-01
3102421-01 3072801-01
PRATT & WHITNEY CANADA
SERVICE BULLETIN
P&WC S.B. No. 1669R9
P&WC Proprietary Information. Subject to the restrictions on the back of the locator
The export control classiﬁcation with respect to this document is contained on the back of the locator.Jul 22/2008 PT6A-72-1669
Revision No. 9: Jun 28/2013 Page 4 of 10
TURBOPROP ENGINE
COMPRESSOR TURBINE BLADES - INSPECTION/REPLACEMENT OF

### Page 9

E. T ooling - Price and Availability
T ool No. Nomenclature
Est. Price
($US,) Delivery
PWC71903 Blade Stretch Quote
3. Accomplishment Instructions
A. For CT Blade Trailing Edge Borescope inspection of (Part A):
NOTE: This inspection is not required if the blades have been replaced with
Post-SB1669 blades in accordance with Part C.
(1) Do the borescope inspection of the CT blades (Ref. MM 72-00-00. T able 601
Borescope inspection).
(2) Write accomplishment of P&WC S.B. No. 1669 Part A in the applicable engine
module log book.
TABLE 1, Compressor Turbine Blades Serial Numbers
Blade Position Serial No. Blade Position Serial No. Blade Position Serial No.
12 1 4 1
22 2 4 2
32 3 4 3
42 4 4 4
52 5 4 5
62 6 4 6
72 7 4 7
82 8 4 8
92 9 4 9
10 30 50
11 31 51
12 32 52
13 33 53
14 34 54
15 35 55
PRATT & WHITNEY CANADA
SERVICE BULLETIN
P&WC S.B. No. 1669R9
P&WC Proprietary Information. Subject to the restrictions on the back of the locator
The export control classiﬁcation with respect to this document is contained on the back of the locator.Jul 22/2008 PT6A-72-1669
Revision No. 9: Jun 28/2013 Page 5 of 10
TURBOPROP ENGINE
COMPRESSOR TURBINE BLADES - INSPECTION/REPLACEMENT OF

### Page 10

3. Accomplishment Instructions (Cont’d)
TABLE 1, Compressor Turbine Blades Serial Numbers (Cont’d)
Blade Position Serial No. Blade Position Serial No. Blade Position Serial No.
16 36 56
17 37 57
18 38 58
19 39
20 40
Engine Serial:
C.T . Disk S/N:
CT Blades P/N
B. For engines at HSI (Part B):
NOTE: This inspection is not required if the blades have been replaced with
Post-SB1669 blades in accordance with Part C.
(1) Submit a two-CT blade sample for metallurgical evaluation at an overhaul facility
(Ref. Pratt & Whitney Standard Practices Manual PN 585005) (Ref. P&WC SB
No. 1703).
(2) If the metallurgical evaluation is not acceptable, replace the complete set of CT
blades with Post-SB1669 blades in accordance with Part C.
(3) Write accomplishment of P&WC S.B. No. 1669 Part B in the applicable engine
module log book.
C. For the CT blades replacement of (Part C):
(1) Remove the CT Blades P/N 3039901 or P/N 3102401-01 or 3045741-01 and
discard. Refer to the applicable maintenance or overhaul manual instructions.
(2) For the Disk Balancing Assy-Compressor Turbine reidentify as follows:
PRATT & WHITNEY CANADA
SERVICE BULLETIN
P&WC S.B. No. 1669R9
P&WC Proprietary Information. Subject to the restrictions on the back of the locator
The export control classiﬁcation with respect to this document is contained on the back of the locator.Jul 22/2008 PT6A-72-1669
Revision No. 9: Jun 28/2013 Page 6 of 10
TURBOPROP ENGINE
COMPRESSOR TURBINE BLADES - INSPECTION/REPLACEMENT OF

### Page 11

3. Accomplishment Instructions (Cont’d)
CAUTION: MAKE SURE THAT THE REMAINING ELECTROLYTE (ETCH
SOLUTION) IS FULLY NEUTRAL AFTER YOU WRITE ON THE
PART . ELECTROLYTE CAN CAUSE CORROSION ON THE PART .
(a) Put a line across the old part number. Use the electrolyte etch procedure,
0.002 in. (0.05 mm) deep maximum, and write the new part number in the
same area.
PRATT & WHITNEY CANADA
SERVICE BULLETIN
P&WC S.B. No. 1669R9
P&WC Proprietary Information. Subject to the restrictions on the back of the locator
The export control classiﬁcation with respect to this document is contained on the back of the locator.Jul 22/2008 PT6A-72-1669
Revision No. 9: Jun 28/2013 Page 7 of 10
TURBOPROP ENGINE
COMPRESSOR TURBINE BLADES - INSPECTION/REPLACEMENT OF

### Page 12

3. Accomplishment Instructions (Cont’d)
(3) Implement conical grinding of the new CT blades per the applicable overhaul
manual instructions with the differences that follows:
(a) Incorporate 0°43’ taper (Ref Fig. 1).
(b) If necessary replace the segments to get the correct Fit and Clearance
No. 318. Refer to the applicable maintenance or overhaul manual instructions.
(4) Install the parts listed under New P/N in Para. 2.C., Material Information. Refer to
the applicable maintenance or overhaul manual instructions.
NOTE: Record the CT Blades Serial Numbers (Ref. T able 1)
(5) Write accomplishment of P&WC S.B. No. 1669 Part C in the applicable engine
module log book.
D. For Disk Balancing Assy-Compressor Turbine replacement:
(1) Remove the Disk Balancing Assy-Compressor Turbine in accordance with the
Maintenance Manual or Overhaul Manual instructions.
(2) Write accomplishment of P&WC S.B. No. 1669 Part C in the applicable engine
module log book.
4. Appendix
A. Refer to the Fits and Clearances Fig. No 2.
TABLE 2, CT Disk - Fits and Clearances No. 509
Dim. for Ref.
inches (mm)
Limits
inches (mm)
REF .
NO. IFR Name Min. Max. Min. Max. Replace
Post-SB1669
509 Turbine Rotor Diameter
(Green Run) 8.526 8.536
(216.56) (216.81)
509 Turbine Rotor Diameter
(Overhaul) 8.496
(215.80)
PRATT & WHITNEY CANADA
SERVICE BULLETIN
P&WC S.B. No. 1669R9
P&WC Proprietary Information. Subject to the restrictions on the back of the locator
The export control classiﬁcation with respect to this document is contained on the back of the locator.Jul 22/2008 PT6A-72-1669
Revision No. 9: Jun 28/2013 Page 8 of 10
TURBOPROP ENGINE
COMPRESSOR TURBINE BLADES - INSPECTION/REPLACEMENT OF

### Page 13

DETAIL
A
A
0.003
0.006
0  43’
0.050
MAX.
TRAILING
EDGE
C145847
CT Blade Tip Grinding
Figure 1
PRATT & WHITNEY CANADA
SERVICE BULLETIN
P&WC S.B. No. 1669R9
P&WC Proprietary Information. Subject to the restrictions on the back of the locator
The export control classiﬁcation with respect to this document is contained on the back of the locator.Jul 22/2008 PT6A-72-1669
Revision No. 9: Jun 28/2013 Page 9 of 10
TURBOPROP ENGINE
COMPRESSOR TURBINE BLADES - INSPECTION/REPLACEMENT OF

### Page 14

509
C145801
CT Disk - Fits and Clearances
Figure 2
PRATT & WHITNEY CANADA
SERVICE BULLETIN
P&WC S.B. No. 1669R9
P&WC Proprietary Information. Subject to the restrictions on the back of the locator
The export control classiﬁcation with respect to this document is contained on the back of the locator.Jul 22/2008 PT6A-72-1669
Revision No. 9: Jun 28/2013 Page 10 of 10
TURBOPROP ENGINE
COMPRESSOR TURBINE BLADES - INSPECTION/REPLACEMENT OF

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
