# Pratt & Whitney Canada Service Bulletin PT6B-72-39095

Copy: Revision 3 ("PT6B-72-39095 R3"), 16 pages: PDF https://openairdocs.org/files/sha256/a5/78/a5782d79b87f9eb80544b9e7a9af993c5dbd44f2187a1b30aef2a7715926d5ff; text https://openairdocs.org/service-documents/pratt-whitney-canada/pt6b-72-39095/file/a5782d79b87f.md. Rights: © Pratt & Whitney Canada. Filed by the FAA in regulations.gov docket FAA-2015-0486; AD 2015-20-04 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Pratt & Whitney Canada](https://openairdocs.org/service-documents/pratt-whitney-canada.md)
- Type: Service bulletin (Service Bulletin)
- Number: PT6B-72-39095
- Latest revision known: PT6B-72-39095, Revision 3, dated December 29, 2014 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/pratt-whitney-canada/pt6b-72-39095

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2015-20-04](https://openairdocs.org/ad/2015-20-04.md), effective Nov 18, 2015: Revision 3

Also cited in [2 proposed ADs](https://openairdocs.org/service-documents/pratt-whitney-canada/pt6b-72-39095/proposed.md).

## Text (16 pages)

Rights: © Pratt & Whitney Canada. Filed by the FAA in regulations.gov docket FAA-2015-0486; AD 2015-20-04 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

BULLETIN INDEX LOCATOR
72-10-00
TURBOSHAFT ENGINE
NO. 10 BEARING, RGB ASSEMBLY - INSPECTION OF
MODEL APPLICATION
PT6B-37A
Compliance: CATEGORY 3
Summary: In high torque conditions, bearing P/N 3310433-03 can move axially affecting
accuracy of engine torque signal output. The roller bearing internal clearance is not
optimal.
PRATT & WHITNEY CANADA
SERVICE BULLETIN
P&WC S.B. No. 39095R3
Aug 05/2014 PT6B-72-39095
Revision No. 3: Dec 29/2014 Cover Sheet
24-Hour Global Service USA & CANADA........................ 1-800-268-8000 Other .......................................... 1-450-647-8000
CFIRST CENTRE International .................... (IAC*)+8000-268-8000 Fax ............................................. 1-450-647-2888
Toll free where available (SIL GEN-027) * International Access Code Web Site .................................. www.pwc.ca

### Page 2

WARNING - PROPRIETARY RIGHTS & EXPORT CONTROLS NOTICE
This bulletin contains proprietary information of Pratt & Whitney Canada Corp. ( ″P&WC″), which
P&WC provides in conﬁdence and solely for the purposes of supporting engine certiﬁcation and
providing applicable information regarding the proper use, maintenance, inspection, repair, servicing
and parts application of P&WC products and services, as directed therein. Neither this bulletin nor
any information in it may be disclosed to others, or used for any other purpose, including, without
limitation, to design, create, develop, reproduce, manufacture or derive any design, part, product,
material, process, modiﬁcation, conﬁguration change or repair, or obtain FAA or other government
approval to do so. Possession and use of this bulletin is also subject to the restrictions set out in
P&WC’s T echnical Data Agreement (a copy of which may be obtained by contacting P&WC T echnical
Publications). The contents of this bulletin may be subject to export control laws. Unauthorized export
or re-export of the bulletin, or parts thereof, is prohibited. By accepting and possessing this bulletin,
you agree to be bound by the foregoing terms.
If a Government agency or department intends to disclose any information, written notice should be
given to:
VP - Legal Services, Pratt & Whitney Canada Corp., 1000 Marie-Victorin (01BE5), Longueuil,
Quebec J4G 1A1.
Export Control Classiﬁcation
*Data is subject to the jurisdiction of the Export and Import
Controls Bureau of the Department of Foreign Affairs and
International Trade of Canada, Department of Commerce
of the United States and/or Department of State of the
United States.
** Data is not subject to the jurisdiction of the Department
of Commerce of the United States or Department of State
of the United States but would become subject if exposed
to any US involvement.
Regulation Classiﬁcation
Number
Canadian ECL(s)*
ECCN(s)*
P-ECCN(s)** 9E991
USML (ITAR)*
P-USML**

### Page 3

REVISION TRANSMITTAL SHEET
TURBOSHAFT ENGINE MODEL PT6B
SUBJECT : Pratt & Whitney Canada Service Bulletin No. PT6B-72-39095, Rev. No. 3, dated Dec
29/2014 (P&WC S.B. No. 39095R3) NO. 10 BEARING, RGB ASSEMBLY - INSPECTION
OF
Replace your existing copy of this service bulletin with the attached revised bulletin. Destroy the
superseded copy.
Please retain this Revision Transmittal Sheet with the revised bulletin.
SUMMARY: This service bulletin is revised to:
v move the list of affected engine serial numbers from Para. 1.A to T able 1, and
v revise the Compliance in para. 1.E.
EFFECT OF REVISION ON PRIOR ACCOMPLISHMENT :
None.
NOTE: A black bar in the left margin indicates a change in that line of text or ﬁgure.
REVISION HISTORY:
Original Issue: Aug 05/2014
Revision No. 1: Aug 08/2014
Revision No. 2: Oct 01/2014
Revision No. 3: Dec 29/2014
Pratt & Whitney Canada Corp.
1000, Marie-Victorin
Longueuil, Québec, Canada J4G 1A1
Tél. 450-677-9411
29 December 2014
P&WC S.B. No. 39095R3

### Page 4

(No text on this page.)

### Page 5

1. Planning Information
A. Effectivity
For PT6B-37A Engines Pre-SB39092. Refer to T able 1 for list of affected engine serial
numbers.
B. Concurrent Requirements
None.
C. Reason
(1) Problem
In high torque conditions, bearing P/N 3310433-03 can move axially affecting
accuracy of engine torque signal output.
(2) Cause
The roller bearing internal clearance is not optimal.
(3) Solution
Measure axial movement of bearing P/N 3310433-03 for different torque conditions
and report ﬁndings to P&WC.
D. Description
Measure axial movement of bearing P/N 3310433-03 for different torque conditions and
report ﬁndings to P&WC.
E. Compliance
For engines with 500 ﬂight hours or less since new:
CATEGORY 3 - P&WC recommends an initial inspection within 50 ﬂight hours after
receipt of this bulletin and recurring inspections every 100 ﬂight hours
up to a total of 500 ﬂight hours then every 200 ﬂight hours thereafter.
For engines with more than 500 ﬂight hours since new:
CATEGORY 3 - P&WC recommends an initial inspection within 50 ﬂight hours after
receipt of this bulletin and recurring inspections every 200 ﬂight hours.
F . Approval
D.A.A. approved
P&WC No. DCR28403
PRATT & WHITNEY CANADA
SERVICE BULLETIN
P&WC S.B. No. 39095R3
P&WC Proprietary Information. Subject to the restrictions on the back of the locator
The export control classiﬁcation with respect to this document is contained on the back of the locator.Aug 05/2014 PT6B-72-39095
Revision No. 3: Dec 29/2014 Page 1 of 12© 2014 Pratt & Whitney Canada Corp.
PRINTED IN CANADA
TURBOSHAFT ENGINE
NO. 10 BEARING, RGB ASSEMBLY - INSPECTION OF

### Page 6

1. Planning Information (Cont’d)
G. Manpower
Once you have access to the part, an estimate of 3.0 man-hours is required to include
this service bulletin at maintenance.
H. Weight and Balance
None.
I. Electrical Load Data
Not changed.
J. Software Accomplishment Summary
Not applicable.
K. References
Maintenance Manual P/N 3053102 (PT6B-37A)
Illustrated Parts Catalog P/N 3053104 (PT6B-37A)
P&WC SB No. 39092, No. 9 & 10 Bearings, RGB Assembly - Replacement of (PT6B-37A)
L. Publications Affected
None.
M. Interchangeability and Intermixability of Parts
Interchangeability - Refer to Para. 2.C.
Intermixability - Not changed.
2. Material Information
A. Industry Support Information
Not applicable.
B. Material - Cost and Availability
Not applicable.
C. Material Necessary for Each Engine
Not applicable.
PRATT & WHITNEY CANADA
SERVICE BULLETIN
P&WC S.B. No. 39095R3
P&WC Proprietary Information. Subject to the restrictions on the back of the locator
The export control classiﬁcation with respect to this document is contained on the back of the locator.Aug 05/2014 PT6B-72-39095
Revision No. 3: Dec 29/2014 Page 2 of 12
TURBOSHAFT ENGINE
NO. 10 BEARING, RGB ASSEMBLY - INSPECTION OF

### Page 7

2. Material Information (Cont’d)
D. Reidentiﬁed Parts
None.
E. T ooling - Price and Availability
Not applicable.
3. Accomplishment Instructions
CAUTION: BE CAREFUL NOT TO DROP THE TORQUEMETER VALVE DURING
REMOVAL.
A. Remove T orquemeter Cover Assembly in accordance with the maintenance manual
instructions (Ref. 72-10-09 TORQUEMETER - MAINTENANCE PRACTICES) and
Figure 1.
B. Identify the part number of the No. 10 bearing (Ref. IPC 72-10-00, Fig. 3).
C. If the bearing is identiﬁed as P/N 3310433-03, do as follows:
(1) At initial inspection or if previous marking is not visible on gear, manually turn the
torquemeter gear clockwise and mark four points on the torquemeter gear 90° apart
using a permanent marker (Ref. Fig. 2).
(2) At each of the four points marked on the torquemeter gear (Ref. Fig. 2), take the
axial measurement between the bearing P/N 3310433-03 and the T orquemeter
Gear using a centesimal gauge (Ref. Fig. 3 and 4). Record the maximum measured
value on the Record Sheet attached (Ref. Fig. 5).
(3) If the maximum measured value is less than or equal to 2.6 mm, do P&WC S.B.
No. 39092 and contact your local Field Service Representative (FSR).
(4) If the maximum measured value is between 3.8 and 2.6 mm, re-install T orquemeter
Cover Assembly in accordance with the maintenance manual instructions (Ref.
72-10-09 TORQUEMETER - MAINTENANCE PRACTICES).
D. Complete the record sheet (Ref. Fig. 5) and send to P&WC Turboshaft group at:
pwchelo@pwc.ca
E. Write accomplishment of P&WC S.B. No. 39095 in the engine module log book.
4. Appendix
A. Refer T able 1 for the list of affected engine serial numbers.
PRATT & WHITNEY CANADA
SERVICE BULLETIN
P&WC S.B. No. 39095R3
P&WC Proprietary Information. Subject to the restrictions on the back of the locator
The export control classiﬁcation with respect to this document is contained on the back of the locator.Aug 05/2014 PT6B-72-39095
Revision No. 3: Dec 29/2014 Page 3 of 12
TURBOSHAFT ENGINE
NO. 10 BEARING, RGB ASSEMBLY - INSPECTION OF

### Page 8

4. Appendix (Cont’d)
TABLE 1, List of affected Engine serial numbers
Serial Numbers
PU0001 PU0004
PU0006 PU0008
PU0009 PU0010
PU0015 PU0016
PU0023 PU0025
PU0033 PU0034
PU0036 PU0037
PU0038 PU0039
PU0040 PU0041
PU0042 PU0043
PU0044 PU0045
PU0046 PU0047
PU0048 PU0049
PU0050 PU0051
PU0052 PU0053
PU0054 PU0055
PU0058 PU0059
PU0060 PU0061
PU0062 PU0063
PU0066 PU0068
PU0069 PU0070
PU0072 PU0073
PU0074 PU0075
PU0076 PU0077
PU0078 PU0079
PU0080 PU0081
PRATT & WHITNEY CANADA
SERVICE BULLETIN
P&WC S.B. No. 39095R3
P&WC Proprietary Information. Subject to the restrictions on the back of the locator
The export control classiﬁcation with respect to this document is contained on the back of the locator.Aug 05/2014 PT6B-72-39095
Revision No. 3: Dec 29/2014 Page 4 of 12
TURBOSHAFT ENGINE
NO. 10 BEARING, RGB ASSEMBLY - INSPECTION OF

### Page 9

4. Appendix (Cont’d)
TABLE 1, List of affected Engine serial numbers (Cont’d)
Serial Numbers
PU0082 PU0083
PU0084 PU0085
PU0086 PU0087
PU0092 PU0096
PU0098 PU0099
PU0100 PU0101
PU0102 PU0105
PU0106 PU0107
PU0108 PU0109
PU0110 PU0111
PU0112 PU0113
PU0121 PU0122
PU0125 PU0126
PU0127 PU0128
PU0129 PU0130
PU0131 PU0132
PU0133 PU0134
PU0135 PU0136
PU0137 PU0138
PU0139 PU0140
PU0141 PU0142
PU0144 PU0147
PU0148 PU0149
PU0150 PU0151
PU0152 PU0153
PU0154 PU0155
PRATT & WHITNEY CANADA
SERVICE BULLETIN
P&WC S.B. No. 39095R3
P&WC Proprietary Information. Subject to the restrictions on the back of the locator
The export control classiﬁcation with respect to this document is contained on the back of the locator.Aug 05/2014 PT6B-72-39095
Revision No. 3: Dec 29/2014 Page 5 of 12
TURBOSHAFT ENGINE
NO. 10 BEARING, RGB ASSEMBLY - INSPECTION OF

### Page 10

4. Appendix (Cont’d)
TABLE 1, List of affected Engine serial numbers (Cont’d)
Serial Numbers
PU0156 PU0157
PU0158 PU0159
PU0160 PU0161
PU0163 PU0164
PU0165 PU0166
PU0167 PU0169
PU0170 PU0171
PU0172 PU0173
PU0174 PU0175
PU0176 PU0177
PU0178 PU0179
PU0180 PU0181
PU0182 PU0183
PU0184 PU0185
PU0186 PU0187
PU0188 PU0189
PU0190 PU0191
PU0192 PU0193
PU0194 PU0195
PU0196 PU0197
PU0198 PU0199
PU0200 PU0201
PU0202 PU0203
PU0204 PU0205
PU0206 PU0207
PU0208 PU0209
PRATT & WHITNEY CANADA
SERVICE BULLETIN
P&WC S.B. No. 39095R3
P&WC Proprietary Information. Subject to the restrictions on the back of the locator
The export control classiﬁcation with respect to this document is contained on the back of the locator.Aug 05/2014 PT6B-72-39095
Revision No. 3: Dec 29/2014 Page 6 of 12
TURBOSHAFT ENGINE
NO. 10 BEARING, RGB ASSEMBLY - INSPECTION OF

### Page 11

4. Appendix (Cont’d)
TABLE 1, List of affected Engine serial numbers (Cont’d)
Serial Numbers
PU0212 PU0213
PU0214 PU0216
PU0219 PU0220
PRATT & WHITNEY CANADA
SERVICE BULLETIN
P&WC S.B. No. 39095R3
P&WC Proprietary Information. Subject to the restrictions on the back of the locator
The export control classiﬁcation with respect to this document is contained on the back of the locator.Aug 05/2014 PT6B-72-39095
Revision No. 3: Dec 29/2014 Page 7 of 12
TURBOSHAFT ENGINE
NO. 10 BEARING, RGB ASSEMBLY - INSPECTION OF

### Page 12

C229008
T orquemeter Cover Assembly
Figure 1
PRATT & WHITNEY CANADA
SERVICE BULLETIN
P&WC S.B. No. 39095R3
P&WC Proprietary Information. Subject to the restrictions on the back of the locator
The export control classiﬁcation with respect to this document is contained on the back of the locator.Aug 05/2014 PT6B-72-39095
Revision No. 3: Dec 29/2014 Page 8 of 12
TURBOSHAFT ENGINE
NO. 10 BEARING, RGB ASSEMBLY - INSPECTION OF

### Page 13

BEARING
P/N 3310433−03
TORQUEMETER
GEAR
C228527
Marking of T orquemeter Gear
Figure 2
PRATT & WHITNEY CANADA
SERVICE BULLETIN
P&WC S.B. No. 39095R3
P&WC Proprietary Information. Subject to the restrictions on the back of the locator
The export control classiﬁcation with respect to this document is contained on the back of the locator.Aug 05/2014 PT6B-72-39095
Revision No. 3: Dec 29/2014 Page 9 of 12
TURBOSHAFT ENGINE
NO. 10 BEARING, RGB ASSEMBLY - INSPECTION OF

### Page 14

SEE FIGURE 4 FOR
MEASURING POINT DETAIL
C229009
Measurement between Bearing and T orquemeter Gear
Figure 3
PRATT & WHITNEY CANADA
SERVICE BULLETIN
P&WC S.B. No. 39095R3
P&WC Proprietary Information. Subject to the restrictions on the back of the locator
The export control classiﬁcation with respect to this document is contained on the back of the locator.Aug 05/2014 PT6B-72-39095
Revision No. 3: Dec 29/2014 Page 10 of 12
TURBOSHAFT ENGINE
NO. 10 BEARING, RGB ASSEMBLY - INSPECTION OF

### Page 15

BEARING
P/N 3310433−03
TORQUEMETER
GEAR
C228528
Bearing P/N 3310433-03 and T orquemeter Gear
Figure 4
PRATT & WHITNEY CANADA
SERVICE BULLETIN
P&WC S.B. No. 39095R3
P&WC Proprietary Information. Subject to the restrictions on the back of the locator
The export control classiﬁcation with respect to this document is contained on the back of the locator.Aug 05/2014 PT6B-72-39095
Revision No. 3: Dec 29/2014 Page 11 of 12
TURBOSHAFT ENGINE
NO. 10 BEARING, RGB ASSEMBLY - INSPECTION OF

### Page 16

FROM :Send to P&WC e−mail :
NAME :
COMPANY :
E−MAIL :
FAX :
TELEPHONE :
P&WC SERVICE BULLETIN No. :
ENGINE S/N :
TTSN :
TTSO :
REMARKS :
MAXIMUM MEASURED VALUE (mm) :
(Between Bearing and Torquemeter Gear)
pwchelo@pwc.ca
RGB S/N :
C228529
Record Sheet
Figure 5
PRATT & WHITNEY CANADA
SERVICE BULLETIN
P&WC S.B. No. 39095R3
P&WC Proprietary Information. Subject to the restrictions on the back of the locator
The export control classiﬁcation with respect to this document is contained on the back of the locator.Aug 05/2014 PT6B-72-39095
Revision No. 3: Dec 29/2014 Page 12 of 12
TURBOSHAFT ENGINE
NO. 10 BEARING, RGB ASSEMBLY - INSPECTION OF

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
