# Pratt & Whitney Alert Service Bulletin PW4G-100-A72-262

## Copies (2)

Copies the FAA filed in AD dockets on regulations.gov, newest revision first. A newer revision may exist.

- Revision 1 ("PW ASB No. PW4G-100-A72-262 Revision No. 1"), 20 pages: PDF https://openairdocs.org/files/sha256/b5/f5/b5f5e226e164bcbbd4df5193821b201db479ca197b72f19fcc3441c171e4e1e2; text https://openairdocs.org/service-documents/pratt-whitney/pw4g-100-a72-262/file/b5f5e226e164.md. Rights: © Pratt & Whitney. Filed by the FAA in regulations.gov docket FAA-2021-0577; AD 2021-22-14 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- PW4G-100-A72-262 Rev No_1 ("PW4G-100-A72-262 Rev No_1"), 20 pages: PDF https://openairdocs.org/files/sha256/fc/7a/fc7a93e3b4a104343da426825fefdf4a1b9909c5560e8f126b1dd5c8db40d9b0; text https://openairdocs.org/service-documents/pratt-whitney/pw4g-100-a72-262/file/fc7a93e3b4a1.md. Rights: © Pratt & Whitney. Filed by the FAA in regulations.gov docket FAA-2020-0909, the docket of AD 2021-05-15. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Pratt & Whitney](https://openairdocs.org/service-documents/pratt-whitney.md)
- Type: Service bulletin (Alert Service Bulletin)
- Number: PW4G-100-A72-262
- Latest revision known: PW4G-100-A72-262, Revision 1, dated September 3, 2020 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/pratt-whitney/pw4g-100-a72-262

## ADs that cite it (2) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2021-22-14](https://openairdocs.org/ad/2021-22-14.md), effective Dec 17, 2021: Revision 1
- [AD 2021-05-16](https://openairdocs.org/ad/2021-05-16.md), effective May 7, 2021: Revision 1

Also cited in [2 proposed ADs](https://openairdocs.org/service-documents/pratt-whitney/pw4g-100-a72-262/proposed.md).

## Text (20 pages)

Revision 1, the newest copy. Rights: © Pratt & Whitney. Filed by the FAA in regulations.gov docket FAA-2021-0577; AD 2021-22-14 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

██
██
ALERT
SER
VICE
BULLETIN
REVISION
NOTICE
ENGINE
—
RING
SEGMENT
,
ASSEMBL
Y
,
AIR
SEALING,
LOW
PRESSURE
TURBINE
(LPT),
4TH
ST
AGE
—
REPLACE
THE
LPT
4TH
ST
AGE
AIR
SEALING
RING
SEGMENT
ASSEMBLIES
AND
EXAMINE
THE
LPT
CASE
FOR
BULGING
T
urbojet
Engine
Service
Bulletin
No.
PW4G-100-A72-262
Revision
No.
1
dated
September
3,
2020.
Revision
History
Original
Issue
October
22,
2019
Revision
1
September
3,
2020
Reason
for
the
Revision
T
o
remove
engines
from
the
applicable
engine
serial
numbers
for
engine
models
PW4164,
PW4168,
and
PW4168A,
so
that
this
Service
Bulletin
only
applies
to
serial
numbers
P733301
thru
P733692.
T
o
revise
the
Reason
Section
to
remove
references
to
the
T
alon
IIA
and
T
alon
IIB
outer
combustion
chamber
configurations.
T
o
add
References
5
and
6
in
the
References
Section.
T
o
revise
the
Compliance
Category
to
include
a
code
of
6
for
engines
with
non-talon
combustor
configurations.
T
o
add
to
the
Compliance
Section,
under
category
code
6,
which
engine
models
include
the
non-talon
combustor
configurations.
T
o
add
to
the
Compliance
Section,
under
category
code
4,
which
engine
models
include
the
talon
combustor
configurations.
T
o
correct
the
progression
chart
in
Figure
3
to
include
this
Service
Bulletin’
s
number
.
Ef
fect
of
Revision
on
Prior
Compliance
Operators
should
review
this
revision
to
make
sure
that
they
are
in
compliance
with
the
revised
Engine
Ef
fectivity
in
the
Planning
Section
of
this
Service
Bulletin.
This
is
a
Complete
Revision
(Not
Applicable
to
the
SGML
version)
The
contents
are
in
accordance
with
the
list
of
ef
fective
pages.
All
pages
have
the
current
revision
number
.
T
echnical
changes
are
marked
with
black
bars.
MODEL
APPLICA
TION
PW4164,
PW4164-1D,
PW4168,
PW4168-1D,
PW4168A,
PW4168A-1D,
PW4170
BULLETIN
ISSUE
SEQUENCE
PW4G-100
Series
A72-262
Page
Revision
No.
Date
1
thru
18
1
September
3/20
A
copy
of
this
Revision
Notice
and
any
future
revision
notices
must
be
filed
as
a
permanent
record
with
your
copy
of
the
subject
bulletin.
P&W
Distribution
Code
2639
PW4G-100-A72-262
Page
1
of
1
Published
in
United
States
of
America
Not
subject
to
the
EAR
per
15
C.F
.R.
Chapter
1,
Part
734.3(b)(3).

### Page 2

██
██

### Page 3

██
██
ALERT
SER
VICE
BULLETIN
ENGINE
—
RING
SEGMENT
,
ASSEMBL
Y
,
AIR
SEALING,
LOW
PRESSURE
TURBINE
(LPT),
4TH
ST
AGE
—
REPLACE
THE
LPT
4TH
ST
AGE
AIR
SEALING
RING
SEGMENT
ASSEMBLIES
AND
EXAMINE
THE
LPT
CASE
FOR
BULGING
MODEL
APPLICA
TION
PW4164,
PW4164-1D,
PW4168,
PW4168-1D,
PW4168A,
PW4168A-1D,
PW4170
BULLETIN
ISSUE
SEQUENCE
PW4G-100
Series
A72-262
A
T
A
NUMBER
72-53-00
UTC/P&W
PROPRIET
AR
Y
INFORMA
TION
This
document
is
the
property
of
United
T
echnologies
Corporation
—
Pratt
&
Whitney
(UTC/P&W).
Y
ou
may
not
possess,
use,
copy
or
disclose
this
document
or
any
information
in
it,
for
any
purpose,
including
without
limitation
to
design,
manufacture,
or
repair
parts,
or
obtain
F
AA
or
other
government
approval
to
do
so,
without
UTC/P&W's
express
written
permission.
Neither
receipt
nor
possession
of
this
document
alone,
from
any
source,
constitutes
such
permission.
Possession,
use,
copying
or
disclosure
by
anyone
without
UTC/P&W's
express
written
permission
is
not
authorized
and
may
result
in
criminal
and/or
civil
liability
.
Export
Classification:
Not
subject
to
the
EAR
per
15
C.F
.R.
Chapter
1,
Part
734.3(b)(3).
Compliance
Category
4,
6
P&W
Distribution
Code
2639
l
October
22/19
PW4G-100-A72-262
REVISION
NO.
1
-
September
3/20
Page
1
of
18
Published
in
United
States
of
America

### Page 4

Summary
The
function
of
this
Alert
Service
Bulletin
(ASB)
is
to
replace
the
Low
Pressure
T
urbine
(LPT)
4th
stage
air
sealing
ring
segment
assemblies
and
examine
the
LPT
case
for
bulging.
LPT
4th
stage
vanes
leaned
back
which
caused
LPT
4th
stage
blade
fractures,
LPT
4th
stage
blade
airfoil
notching,
and
Unplanned
Engine
Removals
(UERs).
Planning
Information
Ef
fectivity
Data
Engine
Models
Applicable
PW4164,
PW4168,
PW4168A
Engine
Serial
Nos.
P733301
thru
P733692
PW4168A-1D,
PW4170
Engine
Serial
Nos.
P735001
thru
P735190
This
Alert
Service
Bulletin
also
applies
to
engines
converted
to
the
PW4164-1D,
PW4168-1D,
PW4168A-1D,
PW4170
models
by
Reference
9,
SB
No.
PW4G-100-72-220
Concurrent
Requirements
There
are
no
concurrent
requirements.
Reason
1.
Problem:
LPT
4th
stage
vane
lean
back
can
occur
on
PW4000-100
inch
engines
which
causes
LPT
4th
stage
blade
airfoil
notching,
LPT
4th
stage
blade
fracture,
and
UERs.
This
lean
back
occurred
on
a
number
of
engines
and
caused
an
aborted
takeof
f,
an
air
turnback,
engine
surge
during
descent,
and
vibration
indications
that
were
more
than
the
maximum
limits.
2.
Cause:
During
service,
the
LPT
4th
stage
air
sealing
ring
segment
assemblies
can
suf
ficiently
move
into
the
LPT
4th
stage
blades
knife
edge
seals
which
causes
damage
to
the
ring
segment
assemblies
and
lets
gaspath
air
impinge
on
the
LPT
case.
This
can
distort
(local
bulging)
the
LPT
case
rail,
which
results
in
LPT
4th
stage
vane
lean
back
and
damage
to
the
LPT
4th
stage
blades.
3.
Solution:
Replace
the
LPT
4th
stage
air
sealing
ring
segment
assemblies
and
do
a
dimensional
inspection
of
the
LPT
case
for
bulging.
Description
Replace
the
LPT
4th
stage
air
sealing
ring
segment
assemblies
with
new
LPT
4th
stage
air
sealing
ring
segment
assemblies
and
do
a
dimensional
inspection
of
the
LPT
case
for
bulging.
l
October
22/19
PW4G-100-A72-262
REVISION
NO.
1
-
September
3/20
Page
2
UTC/P&W
PROPRIET
AR
Y
INFORMA
TION
Not
subject
to
the
EAR
per
15
C.F
.R.
Chapter
1,
Part
734.3(b)(3).

### Page 5

Compliance
For
PW4164,
PW4168,
PW4168A
engines
installed
with
the
T
alon
IIA
Outer
Combustion
Chamber
Assembly
,
PN
51J100
or
PN
51J382,
by
Reference
8,
SB
No.
PW4G-100-72-179,
or
Reference
12,
SB
No.
PW4G-100-72-253
or
the
T
alon
IIB
Outer
Combustion
Chamber
Assembly
,
PN
51J381
or
PN
51J500,
by
Reference
9,
SB
No.
PW4G-100-72-214,
Reference
10,
SB
No.
PW4G-100-72-219,
or
Reference
12,
SB
No.
PW4G-100-72-253.
And
For
PW4168A-1D
and
PW4170
engines.
Category
4
Do
when
the
engine
or
module
first
goes
to
a
maintenance
base
which
can
do
these
procedures
regardless
of
the
scheduled
maintenance
action
or
the
reason
for
engine
removal.
Each
time
an
LPT
module
is
disassembled
suf
ficiently
to
get
access
to
the
LPT
4th
stage
air
sealing
ring
segment
assemblies,
it
is
necessary
to
replace
the
LPT
4th
stage
air
sealing
ring
segment
assemblies
with
new
and
do
a
check
of
the
LPT
case
for
bulging.
NOTE
:
“First
visit”
is
classified
as
the
next
induction
of
an
engine
into
the
shop
for
maintenance
involving
separation
of
pairs
of
major
mating
engine
flanges,
except
the
separation
of
engine
flanges
solely
for
the
purposes
of
transportation
without
subsequent
engine
maintenance
does
not
constitute
an
engine
shop
visit.
A
“major
mating
engine
flange”
is
considered
flanges
H
through
P
.
For
location
of
flanges,
refer
to
Reference
3,
Engine
Manual,
Chapter/Section
72-00-00
Engine
General,
Description/Operation-01,
Figure
6.
For
PW4164,
PW4168,
PW4168A
engines
installed
with
the
non-T
alon
Outer
Combustion
Chamber
Assembly
,
PN
52J200,
or
54J200,
by
Reference
5,
SB
No.
PW4G-100-72-13,
or
PN
54J300,
or
PN
52J200-001,
by
Reference
6,
SB
No.
PW4G-100-72-74
or
PN
54J300-001,
by
Reference
12,
SB
No.
PW4G-100-72-253.
Category
6
Do
when
the
subassembly
(e.g.
modules,
accessories,
components,
build
groups)
is
disassembled
suf
ficiently
to
give
access
to
the
changed
part
and
to
all
changed
spare
parts.
Approval
Data
The
part
number
changes
and/or
part
changes
specified
in
the
Material
Information
section
and
Accomplishment
Instructions
of
this
Alert
Service
Bulletin
agree
with
the
applicable
Federal
A
viation
Regulations
and
are
F
AA-Approved
for
the
engine
model(s)
given.
This
Alert
Service
Bulletin
does
not
contain
any
change
information
that
revises
the
equipment
definition
covered
by
Airbus
approved
modifications.
Manpower
The
estimate
of
man-hours
of
labor
directly
necessary
to
do
the
intent
of
this
Alert
Service
Bulletin
are
as
follows:
1.
Necessary
for
Replacement
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
50.0
2.
Necessary
for
Inspection
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
2.0
3.
T
otal
Necessary
Man-hours
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
52.0
l
October
22/19
PW4G-100-A72-262
REVISION
NO.
1
-
September
3/20
Page
3
UTC/P&W
PROPRIET
AR
Y
INFORMA
TION
Not
subject
to
the
EAR
per
15
C.F
.R.
Chapter
1,
Part
734.3(b)(3).

### Page 6

W
eight
Data
No
Change.
Electrical
Load
Data
Not
Applicable.
Software
Accomplishment
Summary
Not
Applicable.
References
1.
T
urbojet
Engine
Standard
Practices
Manual,
Part
No.
585005.
2.
PW4164,
PW4168,
PW4168A,
PW4170
T
urbofan
Engines,
Illustrated
Parts
Catalog,
Part
No.
51A343.
3.
PW4164,
PW4164-1D,
PW4164C,
PW4164C-1D,
PW4164C/B,
PW4164C/B-1D,
PW4168,
PW4168-1D,
PW4168A,
PW4168A-1D,
PW4170
T
urbofan
Engines,
Engine
Manual,
Part
No.
51A342.
4.
PW4000
Series
T
urbofan
Engines,
Engine
Cleaning,
Inspection
And
Repair
(CIR)
Manual,
Part
No.
51A357.
5.
Service
Bulletin
No.
PW4G-100-72-13;
Engine
—
Chamber
Assembly
,
Outer
Combustion
-
Replace
With
A
New
Chamber
That
W
eighs
Less
Than
The
Present
One.
Issue
Sequence
72-13,
PW4G-100
Series.
6.
Service
Bulletin
No.
PW4G-100-72-74;
Engine
-
Chamber
Assembly
,
Outer
Combustion
-
Modification
Of
T
o
Incorporate
A
Spark
Igniter
Guide
That
Will
Not
Rotate.
Issue
Sequence
72-74,
PW4G-100
Series.
7.
Service
Bulletin
No.
PW4G-100-72-76;
Engine
—
Ring
Segment
Assemblies,
3rd
Thru
5th
Stage
Low
Pressure
T
urbine
(LPT)
Air
Sealing
—
Introduction
Of
Ring
Segments
With
Overhung
Honeycomb
Seals.
Issue
Sequence
72-76,
PW4G-100
Series.
8.
Service
Bulletin
No.
PW4G-100-72-179;
Engine
—
Dif
fuser
And
Combustor
—
Introduction
Of
The
T
alon
II
Combustor
System
For
Delivered
Engines
T
o
Reduce
Engine
Emissions.
Issue
Sequence
72-179,
PW4G-100
Series.
9.
Service
Bulletin
No.
PW4G-100-72-214;
Engine
—
Chamber
Assemblies,
Inner
And
Outer
Combustion
—
Introduction
Of
The
T
alon
IIB
T
o
Reduce
Combustor
Exit
T
emperature
At
The
Outer
Diameter
.
Issue
Sequence
72-214,
PW4G-100
Series.
10.
Service
Bulletin
No.
PW4G-100-72-219;
Engine
—
Modification
Of,
T
o
Incorporate
The
Advantage70
™
;
Performance
And
Durability
Upgrade
Kit
T
o
Improve
Engine
Reliability
And
Reduce
Thrust
Specific
Fuel
Consumption.
Issue
Sequence
72-219,
PW4G-100
Series.
1
1.
Service
Bulletin
No.
PW4G-100-72-220;
Engine
—
Conversion
Of
A
PW4164,
PW4168,
Or
PW4168A
Engine
T
o
A
PW4164-1D,
PW4168-1D,
PW4168A-1D,
Or
PW4170
Engine.
Issue
Sequence
72-220,
PW4G-100
Series.
12.
Service
Bulletin
No.
PW4G-100-72-253;
Engine
—
Nuts,
Chamber
Assembly
,
Outer
Combustion
-
Replacement
Of,
With
W
aspaloy
Nuts
T
o
Reduce
Nut
Liberation.
Issue
Sequence
72-253,
PW4G-100
Series.
NOTE
:
Reference
7
is
shown
to
help
find
configurations
in
relation
to
this
bulletin.
NOTE
:
References
5,
6,
and
8
thru
1
1
are
shown
to
help
find
non-production
configurations
that
may
incorporate
this
bulletin.
l
October
22/19
PW4G-100-A72-262
REVISION
NO.
1
-
September
3/20
Page
4
UTC/P&W
PROPRIET
AR
Y
INFORMA
TION
Not
subject
to
the
EAR
per
15
C.F
.R.
Chapter
1,
Part
734.3(b)(3).

### Page 7

Publications
Changed
PW4164,
PW4168,
PW4168A,
PW4170
T
urbofan
Engines,
Illustrated
Parts
Catalog,
Part
No.
51A343.
72-53-00,
Figures
3
and
4.
PW4000
Series
T
urbofan
Engines,
Engine
Cleaning,
Inspection
And
Repair
(CIR)
Manual,
Part
No.
51A357.
Interchangeability
Old
and
new
parts
are
interchangeable
only
in
full
sets.
Information
in
the
Appendix
Alternate
Accomplishment
Instructions
(No)
Progression
Charts
(Y
es)
Added
Data
(Y
es)
Revision
to
T
able
of
Limits
(No)
Inspection
Procedures
(No)
l
October
22/19
PW4G-100-A72-262
REVISION
NO.
1
-
September
3/20
Page
5
UTC/P&W
PROPRIET
AR
Y
INFORMA
TION
Not
subject
to
the
EAR
per
15
C.F
.R.
Chapter
1,
Part
734.3(b)(3).

### Page 8

Material
Information
Material
—
Cost
and
A
vailability
1.
The
estimated
price
of
new
material
to
do
this
Alert
Service
Bulletin
using
new
replacement
parts
is
$64,592.00.
2.
There
is
no
kit
provided
to
do
this
Service
Bulletin.
3.
Part
availability
information
is
provided
in
material
data
Instructions
—
Disposition.
Industry
Support
Program
Not
Applicable.
The
material
data
that
follows
is
for
each
engine.
NOTE
:
It
is
possible
to
use
the
Chapter/Section
and
Figure/Item
reference
number
shown
below
the
old
part
number
to
find
the
part
in
the
Illustrated
Parts
Catalog.
Because
there
are
many
dif
ferent
configurations
used,
it
is
frequently
necessary
to
show
more
than
one
group
of
parts.
When
this
occurs,
parts
that
are
interchangeable
are
shown
line-by-line
only
,
unless
this
is
shown
dif
ferently
.
CAUTION
:
THE
FOLLOWING
MA
TERIAL
DA
T
A
T
ABLE(S)
ARE
ORGANIZED
BY
ILLUSTRA
TED
P
AR
TS
CA
T
ALOG.
ALL
P
AR
TS
IN
THE
T
ABLE(S)
MA
Y
OR
MA
Y
NOT
BE
APPLICABLE
T
O
ALL
THE
ENGINE
MODELS
SHOWN
IN
THE
T
ABLE
HEADING.
YOU
MUST
REFER
T
O
THE
APPROPRIA
TE
ILLUSTRA
TED
P
AR
TS
CA
T
ALOG
FOR
ENGINE
MODEL
APPLICABILITY
USING
THE
OLD
P
AR
T
NUMBER
(PN)
AND
CA
T
ALOG
SEQUENCE
NUMBER.
F
AILURE
T
O
INST
ALL
THE
P
AR
T(S)
IN
THE
CORRECT
ENGINE
MODEL
MA
Y
RESUL
T
IN
A
CONFIGURA
TION
THA
T
IS
NOT
F
AA
APPROVED.
The
material
data
that
follows
is
for
each
engine.
For
PW4164,
PW4164-1D,
PW4168,
PW4168-1D,
PW4168A,
PW4168A-1D,
PW4170
Engines:
New
PN
Qty
Estimate
of
Unit
Price
($)
Keyword
Old
PN
Instructions
—
Disposition
50N526-01
22
2936.00
RING
SEGMENT
—
ASSY
OF
,
AIR
SEALING,
LPT
,
4STG
50N463-01
(72-53-00-5-50)
(2)(A)(N)
OR
22
2936.00
RING
SEGMENT
—
ASSY
OF
,
AIR
SEALING,
LPT
,
4STG
50N526-01
(72-53-00-5-50
A)
(C)
Modification
and
Spares
Information
Estimated
part
prices
are
provided
when
they
are
available
at
time
of
publication.
The
Estimate
of
Unit
Price
is
only
for
planning
purposes
and
does
not
constitute
a
firm
quotation.
An
asterisk
(*)
is
shown
where
part
pricing
information
was
unavailable.
In
either
case,
contact
Pratt
&
Whitney
Spares
Management
&
Logistics
for
firm
quotations.
l
October
22/19
PW4G-100-A72-262
REVISION
NO.
1
-
September
3/20
Page
6
UTC/P&W
PROPRIET
AR
Y
INFORMA
TION
Not
subject
to
the
EAR
per
15
C.F
.R.
Chapter
1,
Part
734.3(b)(3).

### Page 9

Parts
Modification
Conditions
(2)
The
new
part
is
a
replacement
part
only
,
and
cannot
be
obtained
by
modification
of
the
old
part.
Spare
Parts
A
vailability
(A)
The
new
part
is
available.
(C)
The
old
part
will
continue
to
be
supplied.
(N)
The
old
part
is
not
available.
V
endor
Services
or
Special
Components/Materials
Not
Applicable.
Material
Data
for
Each
Spare
Engine
The
material
for
each
spare
engine
is
as
stated
in
the
preceding
material
information
section.
Reidentified
Parts
Not
Applicable.
Necessary
T
ools
No
more
Support
Equipment
is
necessary
.
Other
Material
Information
Data
Not
Applicable.
l
October
22/19
PW4G-100-A72-262
REVISION
NO.
1
-
September
3/20
Page
7
UTC/P&W
PROPRIET
AR
Y
INFORMA
TION
Not
subject
to
the
EAR
per
15
C.F
.R.
Chapter
1,
Part
734.3(b)(3).

### Page 10

Accomplishment
Instructions
1.
Replace
the
twenty-two
(22)
LPT
4th
Stage
Air
Sealing
Ring
Segment
Assemblies,
PN
50N526-01
or
PN
50N463-01,
with
new
LPT
4th
Stage
Air
Sealing
Ring
Segment
Assemblies,
PN
50N526-01.
See
Figure
1.
NOTE
:
The
LPT
4th
stage
air
sealing
ring
segment
assemblies
are
the
same
for
the
PW4000-94
and
PW4000-100
engine
models.
Y
ou
cannot
use
LPT
4th
stage
air
sealing
ring
segment
assemblies
again
in
PW4000-94
or
PW4000-100
engine
models
after
you
remove
them.
2.
Do
a
dimensional
inspection
of
the
LPT
case
for
bulging
by
Method
A
or
Method
B.
Y
ou
must
complete
Method
A
or
Method
B
as
follows.
See
Figure
2.
A.
Method
A
—
Do
a
dimensional
inspection
of
the
LPT
4th
stage
vane
drop
dimension
as
follows.
Refer
to
Reference
4,
CIR
Manual,
Chapter/Section
72-53-17,
Check-04.
(1)
Position
the
PW
A
85690
Gage
into
the
LPT
4th
stage
vane
retaining
rail.
Apply
light
hand
pressure
rearward
to
seat
the
Gage.
(2)
Put
the
parallel
bar
across
the
LPT
case
front
flange.
(3)
Make
a
measurement
at
forty-four
(44)
equally
spaced
locations.
Y
ou
must
make
an
analysis
of
each
location
individually
.
It
is
not
permitted
to
use
averages.
(4)
If
one
or
more
of
the
measurements
from
Step
2.A.3
is
not
in
the
limits
specified
by
table
802,
Index
2,
do
a
check
of
the
measurements
for
Index
20
and
27
specified
in
T
able
1.
Refer
to
Reference
4,
CIR
Manual,
Chapter/Section
72-53-17,
Check-04.
(5)
If
Index
20
and
27
is
not
in
the
serviceable
limits,
you
must
repair
the
LPT
case
by
the
repair
specified
in
T
able
1.
B.
Method
B
—
Do
a
dimensional
inspection
of
Index
20
and
Index
27.
If
the
results
are
not
within
the
permitted
limits,
you
must
repair
the
LPT
case
as
specified.
See
T
able
1.
l
October
22/19
PW4G-100-A72-262
REVISION
NO.
1
-
September
3/20
Page
8
UTC/P&W
PROPRIET
AR
Y
INFORMA
TION
Not
subject
to
the
EAR
per
15
C.F
.R.
Chapter
1,
Part
734.3(b)(3).

### Page 11

T
ABLE
1:
SER
VICEABLE
LIMITS
AND
REP
AIR
Examine
Serviceable
Limits
Repairable
Limits
Repair
20
0.870
inch
(22.098
mm)
maximum
measured
at
forty-four
(44)
positions
of
equal
distance.
Each
location
must
be
evaluated
individually
.
A
veraging
is
not
permissible.
0.898
inch
(22.809
mm)
maximum.
-20,
-48,
-60,
-79
27
0.040
inch
(1.016
mm)
maximum
measured
at
fourty-four
(44)
positions
of
equal
distance.
Each
location
must
be
evaluated
individually
.
A
veraging
is
not
permissible.
-79
l
October
22/19
PW4G-100-A72-262
REVISION
NO.
1
-
September
3/20
Page
9
UTC/P&W
PROPRIET
AR
Y
INFORMA
TION
Not
subject
to
the
EAR
per
15
C.F
.R.
Chapter
1,
Part
734.3(b)(3).

### Page 12 (OCR)

Pratt & Whitney
A United Technologies Company
50N463-01 OR 50N526-01
LPT 4TH STAGE AIR SEALING
RING SEGMENT ASSEMBLY
REPLACE WITH
50N526-01
(22 LOCATIONS)
B529217
LOCATION OF THE LPT 4TH STAGE AIR SEALING RING SEGMENT ASSEMBLY
72-53-00
FIGURE 1
October 22/19  PW4G-100-A72-262
I REVISION NO. 1 - September 3/20  Page 10
UTC/P&W PROPRIETARY INFORMATION
Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3).

### Page 13

THIS
P
AGE
IS
EMPTY
l
October
22/19
PW4G-100-A72-262
REVISION
NO.
1
-
September
3/20
Page
1
1
UTC/P&W
PROPRIET
AR
Y
INFORMA
TION
Not
subject
to
the
EAR
per
15
C.F
.R.
Chapter
1,
Part
734.3(b)(3).

### Page 14 (OCR)

Pratt & Whitney
A United Technologies Company
STAGE 4
BULGE INSPECTION
LOCATION
(REFERENCE)  BASIC DROP
E V  DIMENSIONS
(REFERENCE)
F
Л
CROSS-SECTION OF THE LPT CASE
B529221
DIMENSIONAL INSPECTION OF THE LPT CASE FOR BULGING
FIGURE 2, SHEET 1
| REVISION NO. 1 - September 3/20  October 22/19  PW4G-100-A72-262  Page 12
UTC/P&W PROPRIETARY INFORMATION
Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3).

### Page 15

1.
A
=
R
24.382
INCH
(619.303
MM)
NOM.
REF
.
T
O
CASE
OUTER
W
ALL
2.
B
=
R
25.522
INCH
(648.259
MM)
NOM.
REF
.
T
O
CASE
OUTER
W
ALL
3.
C
=
R
26.632
INCH
(676.453
MM)
NOM.
REF
.
T
O
CASE
OUTER
W
ALL
4.
INDEX
27
IS
CALCULA
TED
FROM
THE
ACTUAL
MEASURED
V
ALUES
OF
A,
B,
AND
C
BY
THE
FORMULA:
27
=
B
-
A
-
((C
-
A)
/
2)
5.
D
=
10.10
INCH
(256.54
MM)
NOM.
REF
.
T
O
FRONT
FLANGE
FRONT
F
ACE
6.
E
=
12.10
INCH
(307.34
MM)
NOM.
REF
.
T
O
FRONT
FLANGE
FRONT
F
ACE
7.
F
=
14.10
INCH
(358.14
MM)
NOM.
REF
.
T
O
FRONT
FLANGE
FRONT
F
ACE
KEY
T
O
FIGURE
2,
SHEET
1
l
October
22/19
PW4G-100-A72-262
REVISION
NO.
1
-
September
3/20
Page
13
UTC/P&W
PROPRIET
AR
Y
INFORMA
TION
Not
subject
to
the
EAR
per
15
C.F
.R.
Chapter
1,
Part
734.3(b)(3).

### Page 16 (OCR)

Pratt & Whitney
A United Technologies Company
B
B
C
CASE CENTERLINE
(REFERENCE)
B529222
DIMENSIONAL INSPECTION OF THE LPT CASE FOR BULGING
FIGURE 2, SHEET 2
October 22/19  PW4G-100-A72-262
I REVISION NO. 1 - September 3/20  Page 14
UTC/P&W PROPRIETARY INFORMATION
Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3).

### Page 17 (OCR)

Pratt & Whitney
A United Technologies Company
LPT 4TH STAGE VANES
(REFERENCE)
20
VANE ENGAGEMENT SLOT
(REFERENCE)
AIRSEAL ENGAGEMENT SLOT
(REFERENCE)
B529224
DIMENSIONAL INSPECTION OF THE LPT CASE FOR BULGING
FIGURE 2, SHEET 3
October 22/19  PW4G-100-A72-262
| REVISION NO. 1 - September 3/20  Page 15
UTC/P&W PROPRIETARY INFORMATION
Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3).

### Page 18

Appendix
Parts
Progression
T
o
Show
the
Changed
Part
in
Relation
to
Other
Parts
l
October
22/19
PW4G-100-A72-262
REVISION
NO.
1
-
September
3/20
Page
16
UTC/P&W
PROPRIET
AR
Y
INFORMA
TION
Not
subject
to
the
EAR
per
15
C.F
.R.
Chapter
1,
Part
734.3(b)(3).

### Page 19 (OCR)

Pratt & Whitney
A United Technologies Company
50N463-01  50N526-01
ORIGINAL  SB 72-76
50N526-01
1 ASB 72-262
B529225A
LPT 4TH STAGE AIR SEALING RING SEGMENT ASSEMBLY
FIGURE 3
October 22/19  PW4G-100-A72-262
I REVISION NO. 1 - September 3/20  Page 17
UTC/P&W PROPRIETARY INFORMATION
Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3).

### Page 20

Added
Data
Internal
Reference
Information
Revision
No.
Reference
Document
Origination
Original
EA19KC582
RDG/AJS
1
EA19KC582
RG/T
AF
Number
values
shown
in
parentheses
adjacent
to
U.S.
values
are
International
System
of
units
(SI)
equivalents.
l
October
22/19
PW4G-100-A72-262
REVISION
NO.
1
-
September
3/20
Page
18
UTC/P&W
PROPRIET
AR
Y
INFORMA
TION
Not
subject
to
the
EAR
per
15
C.F
.R.
Chapter
1,
Part
734.3(b)(3).

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
