# Pratt & Whitney Alert Service Bulletin PW4G-112-A72-347

## Copies (2)

Copies the FAA filed in AD dockets on regulations.gov, newest revision first. A newer revision may exist.

- Revision 4 ("Pratt Whitney Alert Service Bulletin PW4G-112-A72-347 Rev 4"), 27 pages: PDF https://openairdocs.org/files/sha256/82/69/826932ea387b53c8f136d4586eafa67064dc2d1ee286a6649840916c1bff3f3d; text https://openairdocs.org/service-documents/pratt-whitney/pw4g-112-a72-347/file/826932ea387b.md. Rights: © Pratt & Whitney. Filed by the FAA in regulations.gov docket FAA-2023-1638; AD 2023-22-02 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Revision 1 ("PW4G-112-A72-347 R0"), 18 pages: PDF https://openairdocs.org/files/sha256/a8/da/a8da3ad05e93c5a65f45e617cd3cf04fe37ad7dc604453791356a10d1a29995b; text https://openairdocs.org/service-documents/pratt-whitney/pw4g-112-a72-347/file/a8da3ad05e93.md. Rights: © Pratt & Whitney. Filed by the FAA in regulations.gov docket FAA-2017-0719; AD 2018-02-10 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Pratt & Whitney](https://openairdocs.org/service-documents/pratt-whitney.md)
- Type: Service bulletin (Alert Service Bulletin)
- Number: PW4G-112-A72-347
- Latest revision known: PW4G-112-A72-347, Revision 4, dated September 1, 2022 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/pratt-whitney/pw4g-112-a72-347

## ADs that cite it (2) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2023-22-02](https://openairdocs.org/ad/2023-22-02.md), effective Dec 26, 2023: Revision 4
- [AD 2018-02-10](https://openairdocs.org/ad/2018-02-10.md), effective Feb 26, 2018: Revision 1, and with none named

Also cited in [2 proposed ADs](https://openairdocs.org/service-documents/pratt-whitney/pw4g-112-a72-347/proposed.md).

## Text (27 pages)

Revision 4, the newest copy. Rights: © Pratt & Whitney. Filed by the FAA in regulations.gov docket FAA-2023-1638; AD 2023-22-02 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

██
██
ALERT
SER
VICE
BULLETIN
REVISION
NOTICE
ENGINE
—
CASE
ASSEMBL
Y
,
DIFFUSER
OUTER
—
REPETITIVE
INSPECTION
OF
BOSSES
FOR
CRACKS
T
urbojet
Engine
Alert
Service
Bulletin
No.
PW4G-1
12-A72-347
Revision
No
4
dated
September
1,
2022
.
Revision
History
Original
Issue
March
31,
2017
Revision
1
dated
October
25,
2017
Revision
2
dated
March
4,
2019
Revision
3
dated
September
13,
2019
Revision
4
dated
September
1,
2022
Reason
for
the
Revision
T
o
update
the
total
cycle
requirements
and
inspection
guidelines
in
the
Compliance
Section
and
T
able
1.
T
o
update
this
Service
Bulletin
with
changed
company
name
from
“United
T
echnologies
Corporation”
to
“Raytheon
T
echnologies
Corporation”
as
necessary
.
T
o
update
the
graphic
configuration
control
number
in
Figure
2.
T
o
make
editorial
changes
that
do
not
af
fect
the
technical
content
of
this
Service
Bulletin.
Ef
fect
of
Revision
on
Prior
Compliance
None.
This
is
a
Complete
Revision
(Not
Applicable
to
the
SGML
version)
The
contents
are
in
accordance
with
the
list
of
ef
fective
pages.
All
pages
have
the
current
revision
number
.
T
echnical
changes
are
marked
with
black
bars.
MODEL
APPLICA
TION
PW4074,
PW4074D,
PW4077,
PW4077D,
PW4084D,
PW4090,
PW4090-3
BULLETIN
ISSUE
SEQUENCE
PW4G-1
12
Series
A72-347
Page
Revision
No.
Date
1
thru
22
4
September
1/22
A
copy
of
this
Revision
Notice
and
any
future
revision
notices
must
be
filed
as
a
permanent
record
with
your
copy
of
the
subject
bulletin.
P&W
Distribution
Code
2641
PW4G-1
12-A72-347
Page
1
of
1
Published
in
United
States
of
America
Not
subject
to
the
EAR
per
15
C.F
.R.
Chapter
1,
Part
734.3(b)(3).

### Page 2

██
██

### Page 3

██
██
ALERT
SER
VICE
BULLETIN
ENGINE
—
CASE
ASSEMBL
Y
,
DIFFUSER
OUTER
—
REPETITIVE
INSPECTION
OF
BOSSES
FOR
CRACKS
MODEL
APPLICA
TION
PW4074,
PW4074D,
PW4077,
PW4077D,
PW4084D,
PW4090,
PW4090-3
BULLETIN
ISSUE
SEQUENCE
PW4G-1
12
Series
A72-347
A
T
A
NUMBER
72-41-00
R
TX/P&W
PROPRIET
AR
Y
INFORMA
TION
This
document
is
the
property
of
Raytheon
T
echnologies
Corporation
—
Pratt
&
Whitney
(R
TX/P&W).
Y
ou
may
not
possess,
use,
copy
or
disclose
this
document
or
any
information
in
it,
for
any
purpose,
including
without
limitation
to
design,
manufacture,
or
repair
parts,
or
obtain
F
AA
or
other
government
approval
to
do
so,
without
R
TX/P&W's
express
written
permission.
Neither
receipt
nor
possession
of
this
document
alone,
from
any
source,
constitutes
such
permission.
Possession,
use,
copying
or
disclosure
by
anyone
without
R
TX/P&W's
express
written
permission
is
not
authorized
and
may
result
in
criminal
and/or
civil
liability
.
Export
Classification:
Not
subject
to
the
EAR
per
15
C.F
.R.
Chapter
1,
Part
734.3(b)(3).
F
AA
Airworthiness
Directive
Directive
No.
2018-02-10
Compliance
Category
3,
5
P&W
Distribution
Code
2641
l
March
31/17
PW4G-1
12-A72-347
REVISION
NO.
4
-
September
1/22
Page
1
of
22
Published
in
United
States
of
America

### Page 4

Summary
The
purpose
of
this
Alert
Service
Bulletin
is
to
provide
a
fleet
management
plan,
inspection
procedure,
and
inspection
requirements
to
perform
an
on-wing,
of
f-wing,
and
module
level
Fluorescent
Penetrant
Inspection
(FPI)
on
bosses
of
the
outer
dif
fuser
case.
Cracking
has
been
found
on
three
outer
dif
fuser
case
boss
near
the
TT3
probe
boss.
Pratt
&
Whitney
has
also
analytically
identified
additional
bosses
on
the
outer
dif
fuser
case
that
have
the
potential
for
developing
a
crack.
A
crack
could
propagate
to
case
rupture.
Planning
Information
Ef
fectivity
Data
Engine
Models
Applicable
PW4074,
PW4077,
PW4074D,
PW4077D,
PW4084D,
PW4090,
PW4090-3
Engine
Serial
No.
—
All
engines
Concurrent
Requirements
There
are
no
concurrent
requirements.
Reason
1.
Problem:
Seven
outer
dif
fuser
cases
were
found
with
cracking
during
FPI.
Pratt
&
Whitney
has
also
analytically
identified
additional
bosses
on
the
outer
dif
fuser
cases
that
have
potential
for
developing
a
crack.
Cracks
could
propagate
to
case
rupture.
2.
Cause:
The
root
cause
is
still
being
investigated
at
this
time.
3.
Solution:
Perform
a
repetitive
FPI
on
certain
bosses
of
outer
dif
fuser
case
on
fully
assembled
engine
(on-wing
and
of
f-wing)
and
disassembled
engines
(module
level)
per
fleet
management
plan.
This
Alert
Service
Bulletin
provides
the
FPI
process,
procedure,
and
timing
necessary
to
perform
this
inspection.
There
is
no
terminating
action
for
this
Alert
Service
Bulletin.
Description
Do
a
repetitive
FPI
of
some
bosses
of
the
outer
dif
fuser
case
at
specified
intervals.
Compliance
Category
3
(Parts
A
and
B)
FOR
P
AR
T
A
AND
B
OF
ACCOMPLISHMENT
INSTRUCTIONS:
Outer
dif
fuser
case
FPI
to
be
performed
when
engine
is
fully
assembled
(on-wing
or
of
f-wing).
For
any
outer
dif
fuser
case
that
has
less
than
9,200
total
cycles,
do
a
local
FPI
of
the
bosses
specified
prior
to
outer
dif
fuser
case
reaching
9,200
total
cycles
or
within
1,000
cycles,
whichever
occurs
later
.
For
any
outer
dif
fuser
case
that
has
9,200
total
cycles,
or
more,
since
new
and
less
than
13,000
cycles
since
new
as
of
the
Alert
Service
Bulletin
issue
date,
do
a
local
FPI
of
the
bosses
specified
within
1,000
cycles.
For
any
outer
dif
fuser
case
that
has
13,000
cycles
or
more
since
new
,
do
a
local
FPI
of
the
bosses
specified
within
50
cycles.
If
total
cycles
of
the
outer
dif
fuser
case
are
unknown,
inspect
within
50
cycles.
Repeat
FPI
at
an
interval
that
is
not
more
than
2,000
cycles
since
last
FPI.
See
T
able
1.
If
any
outer
dif
fuser
case
that
has
9,200
total
cycles
or
more
since
new
and
the
specified
l
March
31/17
PW4G-1
12-A72-347
REVISION
NO.
4
-
September
1/22
Page
2
UTC/P&W
PROPRIET
AR
Y
INFORMA
TION
Not
subject
to
the
EAR
per
15
C.F
.R.
Chapter
1,
Part
734.3(b)(3).

### Page 5

bosses
have
been
FPI
inspected
within
2,000
cycles
of
the
outer
dif
fuser
case
total
cycles,
do
the
inspection
within
2,000
cycles
of
that
last
inspection
or
within
1,000
cycles
of
Alert
Service
Bulletin
issue
date,
whichever
occurs
later
.
See
T
able
1.
T
able
1:
Outer
dif
fuser
case
Fluorescent
Penetrant
Inspection
(FPI)
inspection
requirements
for
fully
assembled
(on-wing
or
of
f-wing)
engines
Outer
Dif
fuser
Case
(ODC)
T
otal
Cycle
(TC)
Perform
Initial
Inspection
Within
(Cycles)
Re-Inspection
Interval
(Cycles)
Inspection
Guidelines
Inspection
Examples
TC
<
9,200
Prior
to
ODC
reaching
9,200
TC
or
within
1,000
cycles,
whichever
comes
later
.
2,000
For
any
ODC
that
has
less
than
9,200
TC,
do
a
local
Fluorescent
Penetrant
Inspection
(FPI)
of
the
bosses
specified
before
ODC
reaches
9,200
TC
or
within
1,000
cycles
of
this
Alert
Service
Bulletin
issue
date,
whichever
occurs
later
.
Repeat
FPI
at
an
interval
that
is
not
more
than
2,000
cycles
since
last
FPI.
If
ODC
has
8,200
TC
or
less,
then
do
an
initial
inspection
prior
to
ODC
reaching
9,200
TC.
If
ODC
has
8,201
to
9,199
TC,
then
do
an
initial
inspection
within
1,000
cycles
(before
ODC
reaches
9,201
to
10,199
TC).
Repeat
FPI
at
an
interval
that
is
not
more
than
2,000
cycles
since
last
FPI.
9,200
≤
TC
<
13,000
1,000
2,000
For
any
ODC
that
has
9,200
TC,
or
more,
since
new
,
do
a
local
FPI
of
the
bosses
specified
within
1,000
cycles
of
this
Alert
Service
Bulletin
issue
date.
Repeat
FPI
at
an
interval
that
is
not
more
than
2,000
cycles
since
last
FPI.
If
ODC
has
9,700
TC
since
new
,
then
do
an
initial
inspection
within
1,000
TC
(before
ODC
reaches
10,700
TC).
Repeat
FPI
at
an
interval
that
is
not
more
than
2,000
cycles
since
last
FPI.
l
March
31/17
PW4G-1
12-A72-347
REVISION
NO.
4
-
September
1/22
Page
3
UTC/P&W
PROPRIET
AR
Y
INFORMA
TION
Not
subject
to
the
EAR
per
15
C.F
.R.
Chapter
1,
Part
734.3(b)(3).

### Page 6

TC
≥
13,000
50
2000
For
any
ODC
that
has
13,000
TC,
or
more,
since
new
,
do
a
local
FPI
of
the
bosses
specified
within
50
cycles
of
this
Alert
Service
Bulletin
issue
date.
Repeat
FPI
at
an
interval
that
is
not
more
than
2,000
cycles
since
last
FPI.
If
ODC
has
13,500
TC
since
new
,
then
initial
inspection
needs
to
be
done
within
50
TC
(before
ODC
reaches
13,550
TC).
Repeat
FPI
at
an
interval
that
is
not
more
than
2,000
cycles
since
last
FPI.
TC
≥
9,200
and
FPI
was
performed
within
2,000
cycles
of
the
ODC
TC
2,000
2,000
If
any
ODC
that
has
9,200
TC
or
more
since
new
and
the
specified
bosses
have
been
FPI’d
within
2,000
cycles
of
the
ODC
TC,
do
the
inspection
within
2,000
cycles
of
that
last
inspection
or
within
1,000
cycles
of
this
Alert
Service
Bulletin
issue
date,
whichever
occurs
later
.
If
ODC
was
FPI'd
at
8,700
TC,
then
do
an
initial
inspection
within
2,000
cycles
(before
ODC
reaches
10,700
TC).
Repeat
FPI
at
an
interval
that
is
not
more
than
2,000
cycles
since
last
FPI.
TC
=
Unknown
50
2,000
If
TC
of
the
ODC
are
unknown,
do
an
inspection
within
50
cycles
of
this
Alert
Service
Bulletin
issue
date.
Repeat
FPI
at
an
interval
that
is
not
more
than
2,000
cycles
since
last
FPI.
If
ODC
has
TC
that
are
unknown,
then
initial
inspection
needs
to
be
done
within
50
cycles
of
current
ODC
TC.
Repeat
FPI
at
an
interval
that
is
not
more
than
2,000
cycles
since
last
FPI.
l
March
31/17
PW4G-1
12-A72-347
REVISION
NO.
4
-
September
1/22
Page
4
UTC/P&W
PROPRIET
AR
Y
INFORMA
TION
Not
subject
to
the
EAR
per
15
C.F
.R.
Chapter
1,
Part
734.3(b)(3).

### Page 7

Category
5
(Part
C)
FOR
P
AR
T
C
OF
ACCOMPLISHMENT
INSTRUCTIONS:
Outer
dif
fuser
case
FPI
to
be
performed
when
engine
is
disassembled
(module
level).
Perform
local
FPI
of
all
the
bosses
specified
at
every
flange
M
separation.
NOTE
:
Module
level
is
defined
when
flange
M
is
split.
NOTE
:
Piece
part
FPI
per
Cleaning,
Inspection
and
Repair
Manual
(PN
51A750),
A
T
A
72-41-13,
Inspection/Check-02
meets
the
requirements
for
the
initial
and
repetitive
inspections.
NOTE
:
After
module
level
inspection,
perform
subsequent
FPI
for
assembled
engines
on-wing
and
of
f-wing
every
2,000
cycles.
NOTE
:
See
Reference
4
or
5,
Engine
Manual,
Chapter/Section
05-10-01,
for
Outer
Dif
fuser
Case
Special
Maintenance
Requirements,
T
ask
05-10-01-990-007.
Approval
Data
The
times
between
inspections
specified
in
Compliance
and
the
inspection
procedures
specified
in
the
Accomplishment
Instructions
agree
with
the
applicable
Federal
A
viation
Regulations
and
are
F
AA-Approved
for
the
engine
model(s)
given.
Revision
3
of
this
Service
Bulletin
has
been
approved
by
the
Manager
,
Engine
Certification
Of
fice,
ANA
140,
by
letter
,
dated
September
1
1,
2019,
as
an
Alternate
Method
Of
Compliance
(AMOC)
to
Airworthiness
Directive
(AD)
2018-02-10.
A
copy
of
this
AMOC
letter
is
attached
in
the
Appendix
of
this
Service
Bulletin.
Manpower
The
estimate
of
man-hours
of
labor
directly
necessary
to
do
the
on-wing
FPI
are
as
follows:
For
PW4074
and
PW4077
engines
1.
Necessary
to
Open
and
Close
the
Cowl
Doors
and
Deactivate/Reactivate
Thrust
Reversers
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.0.8
2.
Necessary
to
Perform
an
FPI
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
2.5
3.
T
otal
Necessary
Man-hours
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
3.3
For
PW4074D,
PW4077D,
PW4084D,
PW4090,
and
PW4090-3
engines
1.
Necessary
to
Open
and
Close
the
Cowl
Doors
and
Deactivate/Reactivate
Thrust
Reversers
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.0.8
2.
Necessary
to
Perform
an
FPI
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
4.0
3.
T
otal
Necessary
Man-hours
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
4.8
The
estimate
of
man-hours
of
labor
directly
necessary
to
do
the
of
f-wing
FPI
are
as
follows:
For
PW4074
and
PW4077
engines
1.
Necessary
to
Perform
an
FPI
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
2.5
2.
T
otal
Necessary
Man-hours
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
2.5
l
March
31/17
PW4G-1
12-A72-347
REVISION
NO.
4
-
September
1/22
Page
5
UTC/P&W
PROPRIET
AR
Y
INFORMA
TION
Not
subject
to
the
EAR
per
15
C.F
.R.
Chapter
1,
Part
734.3(b)(3).

### Page 8

For
PW4074D,
PW4077D,
PW4084D,
PW4090,
and
PW4090-3
engines
1.
Necessary
to
Perform
an
FPI
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
4.0
2.
T
otal
Necessary
Man-hours
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
4.0
The
estimate
of
man-hours
of
labor
directly
necessary
to
do
the
module
level
FPI
is
as
follows:
For
PW4074,
PW4077,
PW4074D,
PW4077D,
PW4084D,
PW4090,
and
PW4090-3
engines
1.
Necessary
to
Perform
an
FPI
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
8.0
2.
T
otal
Necessary
Man-hours
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
8.0
W
eight
Data
No
Change.
Electrical
Load
Data
Not
Applicable.
Software
Accomplishment
Summary
Not
Applicable.
References
1.
T
urbojet
Engine
Standard
Practices
Manual,
Part
No.
585005.
2.
PW4074,
PW4077
T
urbofan
Engines,
Illustrated
Parts
Catalog,
Part
No.
51A346.
3.
PW4074D,
PW4077D,
PW4084D,
PW4090,
PW4090-3,
PW4090D,
PW4098
T
urbofan
Engines,
Illustrated
Parts
Catalog,
Part
No.
51A742.
4.
PW4074,
PW4077
T
urbofan
Engines,
Engine
Manual,
Part
No.
51A345.
5.
PW4074D,
PW4077D,
PW4084D,
PW4090,
PW4090-3,
PW4090D,
PW4098
T
urbofan
Engines,
Engine
Manual,
Part
No.
51A751.
6.
PW4000
Series
1
12
Inch
PW4074,
PW4077,
PW4077D,
PW4084D,
PW4090,
PW4098
T
urbofan
Engines,
Engine
Cleaning,
Inspection
And
Repair
(CIR)
Manual,
Part
No.
51A750.
7.
Boeing
777
Aircraft
Maintenance
Manual.
8.
Federal
A
viation
Administration
(F
AA)
Airworthiness
Directive;
2018-02-10.
9.
F
AA
Alternate
Means
Of
Compliance
letter
.
Publications
Changed
Not
Applicable.
Interchangeability
Not
Applicable.
l
March
31/17
PW4G-1
12-A72-347
REVISION
NO.
4
-
September
1/22
Page
6
UTC/P&W
PROPRIET
AR
Y
INFORMA
TION
Not
subject
to
the
EAR
per
15
C.F
.R.
Chapter
1,
Part
734.3(b)(3).

### Page 9

Information
in
the
Appendix
Alternate
Accomplishment
Instructions
(No)
Progression
Charts
(No)
Added
Data
(Y
es)
Revision
to
T
able
of
Limits
(No)
Inspection
Procedures
(No)
l
March
31/17
PW4G-1
12-A72-347
REVISION
NO.
4
-
September
1/22
Page
7
UTC/P&W
PROPRIET
AR
Y
INFORMA
TION
Not
subject
to
the
EAR
per
15
C.F
.R.
Chapter
1,
Part
734.3(b)(3).

### Page 10

Material
Information
Material
—
Cost
and
A
vailability
1.
There
is
no
kit
provided
to
do
this
Alert
Service
Bulletin.
2.
Part
availability
information
is
provided
in
material
data
Instructions
—
Disposition.
Industry
Support
Program
Not
Applicable.
The
material
data
that
follows
is
for
each
engine.
NOTE
:
It
is
possible
to
use
the
Chapter/Section
and
Figure/Item
reference
number
shown
below
the
old
part
number
to
find
the
part
in
the
Illustrated
Parts
Catalog.
CAUTION
:
THE
FOLLOWING
MA
TERIAL
DA
T
A
T
ABLE(S)
ARE
ORGANIZED
BY
ILLUSTRA
TED
P
AR
TS
CA
T
ALOG.
ALL
P
AR
TS
IN
THE
T
ABLE(S)
MA
Y
OR
MA
Y
NOT
BE
APPLICABLE
T
O
ALL
THE
ENGINE
MODELS
SHOWN
IN
THE
T
ABLE
HEADING.
YOU
MUST
REFER
T
O
THE
APPROPRIA
TE
ILLUSTRA
TED
P
AR
TS
CA
T
ALOG
FOR
ENGINE
MODEL
APPLICABILITY
USING
THE
OLD
P
AR
T
NUMBER
(PN)
AND
CA
T
ALOG
SEQUENCE
NUMBER.
F
AILURE
T
O
INST
ALL
THE
P
AR
T(S)
IN
THE
CORRECT
ENGINE
MODEL
MA
Y
RESUL
T
IN
A
CONFIGURA
TION
THA
T
IS
NOT
F
AA
APPROVED.
The
material
data
that
follows
is
for
each
engine.
For
PW4074,
PW4077
Engines:
New
PN
Qty
Estimate
of
Unit
Price
($)
Keyword
Old
PN
Instructions
—
Disposition
1
CASE
ASSEMBL
Y
—
DIFFUSER,
OUTER
50J775
(72-41-00-1-1
A)
(4)(X)
1
CASE
ASSEMBL
Y
—
DIFFUSER,
OUTER
50J775-001
(4)(X)
1
CASE
ASSEMBL
Y
—
DIFFUSER,
OUTER
50J775-002
(4)(X)
1
CASE
ASSEMBL
Y
—
DIFFUSER,
OUTER
50J930
(72-41-00-1-1
B)
(4)(X)
l
March
31/17
PW4G-1
12-A72-347
REVISION
NO.
4
-
September
1/22
Page
8
UTC/P&W
PROPRIET
AR
Y
INFORMA
TION
Not
subject
to
the
EAR
per
15
C.F
.R.
Chapter
1,
Part
734.3(b)(3).

### Page 11

New
PN
Qty
Estimate
of
Unit
Price
($)
Keyword
Old
PN
Instructions
—
Disposition
1
CASE
ASSEMBL
Y
—
DIFFUSER,
OUTER
50J930-001
(4)(X)
1
CASE
ASSEMBL
Y
—
DIFFUSER,
OUTER
50J930-002
(4)(X)
The
material
data
that
follows
is
for
each
engine.
For
PW4074D,
PW4077D,
PW4084D,
PW4090,
PW4090-3
Engines:
New
PN
Qty
Estimate
of
Unit
Price
($)
Keyword
Old
PN
Instructions
—
Disposition
1
CASE
ASSEMBL
Y
—
DIFFUSER,
OUTER
50J930
(72-41-00-1-1)
(4)(X)
1
CASE
ASSEMBL
Y
—
DIFFUSER,
OUTER
50J930-001
(4)(X)
1
CASE
ASSEMBL
Y
—
DIFFUSER,
OUTER
50J930-002
(4)(X)
Modification
and
Spares
Information
Estimated
part
prices
are
provided
when
they
are
available
at
time
of
publication.
The
Estimate
of
Unit
Price
is
only
for
planning
purposes
and
does
not
constitute
a
firm
quotation.
An
asterisk
(*)
is
shown
where
part
pricing
information
was
unavailable.
In
either
case,
contact
Pratt
&
Whitney
Spares
Management
&
Logistics
for
firm
quotations.
Parts
Modification
Conditions
(4)
Do
an
inspection
as
specified
in
the
Accomplishment
Instructions.
Spare
Parts
A
vailability
(X)
See
Reference
2
or
3,
Illustrated
Parts
Catalog
for
applicable
replacement
parts.
V
endor
Services
or
Special
Components/Materials
Not
Applicable.
Material
Data
for
Each
Spare
Engine
The
material
for
each
spare
engine
is
as
stated
in
the
preceding
material
information
section.
l
March
31/17
PW4G-1
12-A72-347
REVISION
NO.
4
-
September
1/22
Page
9
UTC/P&W
PROPRIET
AR
Y
INFORMA
TION
Not
subject
to
the
EAR
per
15
C.F
.R.
Chapter
1,
Part
734.3(b)(3).

### Page 12

Reidentified
Parts
Not
Applicable.
Necessary
T
ools
No
more
Support
Equipment
is
necessary
.
Other
Material
Information
Data
Not
Applicable.
l
March
31/17
PW4G-1
12-A72-347
REVISION
NO.
4
-
September
1/22
Page
10
UTC/P&W
PROPRIET
AR
Y
INFORMA
TION
Not
subject
to
the
EAR
per
15
C.F
.R.
Chapter
1,
Part
734.3(b)(3).

### Page 13

Accomplishment
Instructions
Part
A:
For
Engines
Installed
On
Aircraft
1.
Do
an
FPI
of
the
dif
fuser
case
bosses
highlighted
in
Figure
1,
Sheet
1
and
2,
using
the
procedure
that
follows:
A.
Open
the
fan
cowl
doors
as
specified
in
Reference
7,
Aircraft
Maintenance
Manual,
Chapter/Section
71-1
1-04.
B.
Do
the
deactivation
procedure
for
the
thrust
reversers
doors
as
specified
in
Reference
7,
Aircraft
Maintenance
Manual,
Chapter/Section
78-31-00.
C.
Open
the
core
cowl
doors
as
specified
in
Reference
7,
Aircraft
Maintenance
Manual,
Chapter/Section
71-1
1-06.
D.
Open
the
thrust
reversers
doors
as
specified
in
Reference
7,
Aircraft
Maintenance
Manual,
Chapter/Section
78-31-00.
E.
Remove
hardware
using
one
of
the
following
two
options
to
access
the
bosses
shown
in
Figure
1,
Sheet
1
and
2
and
Figure
2.
Option
1
(1)
Remove
the
T3
thermocouple
probe
as
specified
in
Reference
7,
Aircraft
Maintenance
Manual,
T
ASK
73-21-14-000-802-N00.
(2)
Move
the
T3
thermocouple
cable
out
of
the
way
to
allow
good
visual
access
to
the
TT3
boss.
(3)
If
this
inspection
is
to
be
performed
on
a
PW4074
and
PW4077
engine,
go
to
step
1.E.5.
(4)
For
PW4074D,
PW4077D,
PW4084D,
PW4090,
and
PW4090-3
engines,
loosen
and
move
the
T3
thermocouple
Bracket,
PN
50U677-01
as
follows:
NOTE
:
Refer
to
Figure
2
for
bracket
and
bolt
locations.
(a)
Loosen
the
two
T3
thermocouple
bracket
Bolts
(PN
ST1353-12,
0.3125-24x1.000)
that
hold
the
T3
thermocouple
bracket
to
flange
M
and
remove
the
two
Nuts
(PN
793423)
from
the
aft
side
of
flange
M.
NOTE
:
The
two
Bolts
(PN
ST1353-12)
are
trapped
by
an
external
air
tube
and
cannot
be
removed.
(b)
Move
the
T3
thermocouple
bracket
to
provide
good
visual
access
to
the
TT3
boss
for
the
FPI.
(5)
Loosen
the
loop
clamp
Bolt
(PN
ST141
1-08,
0.190-32x0.625)
and
remove
the
two
loop
clamp
bracket
Bolts
(PN
MS9576-09,
0.3125-24x0.812)
that
hold
the
loop
clamp
Bracket
(PN
57T142-01)
to
the
outer
dif
fuser
case.
(6)
Rotate
the
loop
clamp
bracket
out
of
position
to
allow
good
visual
access
to
the
loop
clamp
bracket
bosses.
Option
2
(1)
Mask
the
four
nuts,
washers,
and
studs
on
the
T3
thermocouple
probe
to
prevent
the
entry
of
penetrant
onto
the
studs.
Refer
to
Step
2.E.(1)(c)
Reference
7,
l
March
31/17
PW4G-1
12-A72-347
REVISION
NO.
4
-
September
1/22
Page
1
1
UTC/P&W
PROPRIET
AR
Y
INFORMA
TION
Not
subject
to
the
EAR
per
15
C.F
.R.
Chapter
1,
Part
734.3(b)(3).

### Page 14

Aircraft
Maintenance
Manual,
Chapter/Section
70-1
1-06,
Fluorescent
Penetrant
Inspection
(SPOP
70).
NOTE
:
Refer
to
Figure
2
for
stud
locations.
(2)
Loosen
the
loop
clamp
Bolt
(PN
ST141
1-08,
0.190-32x0.625)
and
remove
the
two
loop
clamp
bracket
Bolts
(PN
MS9576-09,
0.3125-24x0.812)
that
hold
the
loop
clamp
Bracket
(PN
57T142-01)
to
the
outer
dif
fuser
case.
(3)
Rotate
the
loop
clamp
bracket
out
of
position
to
allow
good
visual
access
to
the
loop
clamp
bracket
bosses.
F
.
Perform
a
local
FPI
(SPOP
70,
High
Sensitivity)
on
bosses
shown
in
Figure
1,
Sheet
1
and
2
and
Figure
2
per
inspection
requirements.
Reference
7,
Aircraft
Maintenance
Manual,
Chapter/Section
70-1
1-06,
Fluorescent
Penetrant
Inspection
(SPOP
70).
Note
special
attention
areas,
see
Figure
1,
Sheet
1
and
2.
NOTE
:
Per
the
manufacturing
process
used
to
produce
this
case,
there
can
be
blended
areas
around
these
bosses
that
can
hold
FPI
fluid
but
are
not
actually
cracks.
Carefully
examine
any
areas
that
hold
FPI
fluid
to
ensure
they
are
or
are
not
exhibiting
a
crack.
NOTE
:
Per
SPOP
70,
clean
the
part
surface
with
a
clean
cloth.
A
nylon
brush,
a
T
ampico
brush,
a
PMC
4095
scrub
pad,
or
a
PMC
4435
scrub
pad
can
be
used
in
place
of
a
cloth
as
needed
to
clean
the
part
surfaces
that
are
not
clean.
G.
If
an
indication
is
found,
disposition
the
case
per
T
able
2.
T
able
2:
Serviceable
limits
for
FPI
indications
found
around
outer
dif
fuser
case
boss
area
Re-inspection
Interval
200
cycles
100
cycles
25
cycles
Remove
Immediately
Indication
length
Up
to
0.100
inch
(2.54
mm)
0.101
–
0.250
inch
(2.565
–
6.350
mm)
0.251
–
0.400
inch
(6.375
–
10.160
mm)
0.401
inch
(10.185
mm)
and
greater
H.
If
multiple
FPI
indications
are
found,
disposition
these
findings
per
the
details
given
below:
(1)
For
multiple
FPI
indications
in
line
with
each
other
,
the
length
of
each
FPI
indication
should
be
added
and
the
total
length
should
be
used
to
determine
re-inspection
interval.
See
T
able
2.
(2)
For
multiple
parallel
FPI
indications,
use
the
largest
FPI
indication
to
determine
re-inspection
interval.
See
T
able
2.
(3)
For
any
intersecting
FPI
indications,
remove
outer
dif
fuser
case
immediately
.
NOTE
:
If
both
engines
on
an
aircraft
are
found
with
FPI
indication,
remove
one
of
the
engines
within
25
cycles.
Outer
dif
fuser
case
with
FPI
indication
0.401
inch
and
greater
should
be
removed
from
service
immediately
.
I.
Keep
a
record
of
all
inspections
performed.
For
any
outer
dif
fuser
case
found
with
FPI
indications,
fill
out
the
FPI
data
collection
form
given
in
the
Appendix
and
report
this
data
to
the
Pratt
&
Whitney
Field
Representative.
l
March
31/17
PW4G-1
12-A72-347
REVISION
NO.
4
-
September
1/22
Page
12
UTC/P&W
PROPRIET
AR
Y
INFORMA
TION
Not
subject
to
the
EAR
per
15
C.F
.R.
Chapter
1,
Part
734.3(b)(3).

### Page 15

J.
If
the
case
is
eligible
to
return
to
service,
re-install
any
hardware
removed
in
the
reverse
order
they
were
removed.
T3
thermocouple
probe
re-installation
per
Reference
7,
Aircraft
Maintenance
Manual,
T
ASK
73-21-14-400-802-N00.
CAUTION
:
CORRECT
T
ORQUES
DO
NOT
CONFORM
T
O
REFERENCE
1,
ST
ANDARD
PRACTICES
MANUAL
ST
ANDARD
T
ORQUES.
T
orque
for
flange
M
bolts:
(Reference
4
and
5,
Engine
Manual,
Chapter/Section
72-00-52,
Installation-20)
180
–
200
lbf-in
(20.337
–
22.596
N.m)
(ST1353-12)
(with
engine
oil)
T
orque
for
loop
clamp
bracket
bolts:
(Reference
4
and
5,
Engine
Manual,
Chapter/Section
72-41-00,
Assembly-01)
125
–
170
lbf-in
(14.123
–
19.207
N.m)
(MS9576-09)
(with
engine
oil)
T
orque
for
loop
clamp
bolts:
(Reference
4
and
5,
Engine
Manual,
Chapter/Section
71-00-01,
Special
Procedure-21)
36
–
40
lbf-in
(4.067
–
4.519
N.m)
(ST141
1-08)
(with
engine
oil)
K.
Close
the
thrust
reversers
doors
as
specified
in
Reference
7,
Aircraft
Maintenance
Manual,
Chapter/Section
78-31-00.
L.
Close
the
core
cowl
doors
as
specified
in
Reference
7,
Aircraft
Maintenance
Manual,
Chapter/Section
71-1
1-06.
M.
Do
the
activation
procedure
for
the
thrust
reversers
doors
as
specified
in
Reference
7,
Aircraft
Maintenance
Manual,
Chapter/Section
78-31-00.
N.
Close
the
fan
cowl
doors
as
specified
in
Reference
7,
Aircraft
Maintenance
Manual,
Chapter/Section
71-1
1-04.
Part
B:
For
Engines
Not
Installed
On
Aircraft
1.
Do
an
FPI
of
the
dif
fuser
case
bosses
highlighted
in
Figure
1,
Sheet
1
and
2,
using
the
procedure
that
follows:
A.
Remove
hardware
per
details
given
below
in
order
to
access
the
bosses
shown
in
Figure
1,
Sheet
1
and
2
and
Figure
2.
(1)
Remove
the
T3
thermocouple
probe
as
specified
in
Reference
4
and
5,
Engine
Manual,
Chapter/Section
71-00-73.
(2)
Move
the
T3
thermocouple
cable
out
of
the
way
to
allow
good
visual
access
to
the
TT3
boss.
(3)
If
this
inspection
is
to
be
performed
on
a
PW4074
and
PW4077
engine,
go
to
step
1.A.5.
(4)
For
PW4074D,
PW4077D,
PW4084D,
PW4090,
and
PW4090-3
engines,
loosen
and
move
the
T3
thermocouple
Bracket
(PN
50U677-01)
as
follows:
NOTE
:
Refer
to
Figure
2
for
bracket
and
bolt
locations.
l
March
31/17
PW4G-1
12-A72-347
REVISION
NO.
4
-
September
1/22
Page
13
UTC/P&W
PROPRIET
AR
Y
INFORMA
TION
Not
subject
to
the
EAR
per
15
C.F
.R.
Chapter
1,
Part
734.3(b)(3).

### Page 16

(a)
Loosen
the
two
T3
thermocouple
bracket
Bolts
(PN
ST1353-12,
0.3125-24x1.000)
that
hold
the
T3
thermocouple
bracket
to
flange
M
and
remove
the
two
Nuts
(PN
793423)
from
the
aft
side
of
flange
M.
NOTE
:
The
two
Bolts
(PN
ST1353-12)
are
trapped
by
an
external
air
tube
and
cannot
be
removed.
(b)
Move
the
T3
thermocouple
bracket
to
provide
good
visual
access
to
the
TT3
boss
for
the
FPI.
(5)
Loosen
the
loop
clamp
Bolt
(PN
ST141
1-08,
0.190-32x0.625)
and
remove
the
two
loop
clamp
bracket
Bolts
(PN
MS9576-09,
0.3125-24x0.812)
that
hold
the
loop
clamp
Bracket
(PN
57T142-01)
to
the
outer
dif
fuser
case.
(6)
Rotate
the
loop
clamp
bracket
out
of
position
to
allow
good
visual
access
to
the
loop
clamp
bracket
bosses.
B.
Perform
a
local
FPI
(SPOP
70,
High
Sensitivity)
on
bosses
shown
in
Figure
1,
Sheet
1
and
2
and
Figure
2
per
inspection
requirements.
Reference
1,
Standard
Practices
Manual,
Chapter/Section
70-33-00,
Fluorescent
Penetrant
Inspection
(SPOP
70).
Note
special
attention
areas,
see
Figure
1,
Sheet
1
and
2.
NOTE
:
Per
the
manufacturing
process
used
to
produce
this
case,
there
can
be
blended
areas
around
these
bosses
that
can
hold
FPI
fluid
but
are
not
actually
cracks.
Carefully
examine
any
areas
that
hold
FPI
fluid
to
ensure
they
are
or
are
not
exhibiting
a
crack.
NOTE
:
Per
SPOP
70,
clean
the
part
surface
with
a
clean
cloth.
A
nylon
brush,
a
T
ampico
brush,
a
PMC
4095
scrub
pad,
or
a
PMC
4435
scrub
pad
can
be
used
in
place
of
a
cloth
as
needed
to
clean
the
part
surfaces
that
are
not
clean.
C.
If
a
crack
is
found,
disposition
the
case
per
T
able
3.
T
able
3:
Serviceable
limits
for
cracks
found
around
outer
dif
fuser
case
boss
area
Re-inspection
Interval
200
cycles
100
cycles
25
cycles
Remove
Immediately
Indication
length
Up
to
0.100
inch
(2.54
mm)
0.101
–
0.250
inch
(2.565
–
6.350
mm)
0.251
–
0.400
inch
(6.375
–
10.160
mm)
0.401
inch
(10.185
mm)
and
greater
D.
If
multiple
FPI
indications
are
found,
disposition
these
findings
per
the
details
given
below:
(1)
For
multiple
FPI
indications
in
line
with
each
other
,
the
length
of
each
FPI
indication
should
be
added
and
the
total
length
should
be
used
to
determine
re-inspection
interval.
See
T
able
3.
(2)
For
multiple
parallel
FPI
indications,
use
the
largest
FPI
indication
to
determine
re-inspection
interval.
See
T
able
3.
(3)
For
any
intersecting
FPI
indications,
remove
outer
dif
fuser
case
immediately
.
NOTE
:
If
both
engines
on
an
aircraft
are
found
with
FPI
indication,
remove
one
of
the
engines
within
25
cycles.
Outer
dif
fuser
case
with
FPI
indication
0.401
inch
and
greater
should
be
removed
from
service
immediately
.
l
March
31/17
PW4G-1
12-A72-347
REVISION
NO.
4
-
September
1/22
Page
14
UTC/P&W
PROPRIET
AR
Y
INFORMA
TION
Not
subject
to
the
EAR
per
15
C.F
.R.
Chapter
1,
Part
734.3(b)(3).

### Page 17

E.
Keep
a
record
of
all
inspections
performed.
For
any
outer
dif
fuser
case
found
with
FPI
indications,
fill
out
the
FPI
data
collection
form
given
in
the
Appendix
and
report
this
data
to
the
Pratt
&
Whitney
Field
Representative.
F
.
If
the
case
is
eligible
to
return
to
service,
re-install
any
hardware
removed
in
the
reverse
order
they
were
removed.
T3
thermocouple
probe
re-installation
per
Reference
4
and
5,
Engine
Manual,
Chapter/Section
71-00-73.
CAUTION
:
CORRECT
T
ORQUES
DO
NOT
CONFORM
T
O
REFERENCE
1,
ST
ANDARD
PRACTICES
MANUAL
ST
ANDARD
T
ORQUES.
T
orque
for
flange
M
bolts:
(Reference
4
and
5,
Engine
Manual,
Chapter/Section
72-00-52,
Installation-20)
180
–
200
lbf-in
(20.337
–
22.596
N.m)
(ST1353-12)
(with
engine
oil)
T
orque
for
loop
clamp
bracket
bolts:
(Reference
4
and
5,
Engine
Manual,
Chapter/Section
72-41-00,
Assembly-01)
125
–
170
lbf-in
(14.123
–
19.207
N.m)
(MS9576-09)
(with
engine
oil)
T
orque
for
loop
clamp
bolts:
(Reference
4
and
5,
Engine
Manual,
Chapter/Section
71-00-01,
Special
Procedure-21)
36
–
40
lbf-in
(4.067
–
4.519
N.m)
(ST141
1-08)
(with
engine
oil)
P
AR
T
C:
For
Disassembled
Engine
(Module
Level)
NOTE
:
Module
level
is
defined
when
flange
M
is
split.
NOTE
:
Piece
part
FPI
per
Cleaning,
Inspection
and
Repair
Manual
(PN
51A750),
A
T
A
72-41-13,
Inspection/Check-02
meets
the
requirements
for
the
initial
and
repetitive
inspections.
NOTE
:
See
Reference
4
or
5,
Engine
Manual,
Chapter/Section
05-10-01,
for
Outer
Dif
fuser
Case
Special
Maintenance
Requirements,
T
ask
05-10-01-990-007.
1.
As
required,
remove
external
brackets
from
locations
shown
in
Figure
3
in
order
to
access
the
bosses
for
FPI
per
Reference
4
and
5,
Engine
Manual,
Chapter/Section
71-00-73.
Refer
to
T
able
4
for
hardware
part
number(s)
that
need(s)
to
be
removed.
NOTE
:
Remove
any
additional
hardware
as
needed
in
order
to
access
the
bosses
highlighted
in
Figure
3
for
FPI.
2.
Perform
a
local
FPI
(SPOP
70,
High
Sensitivity)
on
bosses
shown
in
Figure
3
per
inspection
requirements.
Reference
1,
Standard
Practices
Manual,
Chapter/Section
70-33-00,
Fluorescent
Penetrant
Inspection
(SPOP
70).
NOTE
:
Per
the
manufacturing
process
used
to
produce
this
case,
there
can
be
blended
areas
around
these
bosses
that
can
hold
FPI
fluid
but
are
not
actually
cracks.
Carefully
examine
any
areas
that
hold
FPI
fluid
to
ensure
they
are
or
are
not
exhibiting
a
crack.
3.
If
any
crack(s)
is/are
found,
the
case
must
be
removed
from
service.
4.
If
no
crack(s)
is/are
found,
reinstall
any
hardware
removed
for
the
FPI
per
Reference
4
and
5,
Engine
Manual,
Chapter/Section
71-00-73.
l
March
31/17
PW4G-1
12-A72-347
REVISION
NO.
4
-
September
1/22
Page
15
UTC/P&W
PROPRIET
AR
Y
INFORMA
TION
Not
subject
to
the
EAR
per
15
C.F
.R.
Chapter
1,
Part
734.3(b)(3).

### Page 18

5.
Keep
a
record
of
all
inspections
performed.
For
any
outer
dif
fuser
case
found
with
FPI
indications,
fill
out
the
FPI
data
collection
form
given
in
the
Appendix
and
report
this
data
to
the
Pratt
&
Whitney
Field
Representative.
NOTE
:
After
module
level
inspection,
perform
subsequent
FPI
for
assembled
engines
installed
on
aircraft
and
not
installed
on
aircraft
as
specified
in
Part
A
and
B
of
this
Alert
Service
Bulletin.
l
March
31/17
PW4G-1
12-A72-347
REVISION
NO.
4
-
September
1/22
Page
16
UTC/P&W
PROPRIET
AR
Y
INFORMA
TION
Not
subject
to
the
EAR
per
15
C.F
.R.
Chapter
1,
Part
734.3(b)(3).

### Page 19 (OCR)

FWD
0000190000-80880
...
AFT
E MEIN
0° = TOP DEAD CENTER (TDC)
VIEW A
INSPECTION LOCATION OF T3 THERMOCOUPLE PROBE BOSS AND ADJACENT LOOP
CLAMP BRACKET BOSSES FOR ASSEMBLED ENGINE INSPECTION
FIGURE 1 (SHEET 1 OF 2)
ELLE YEW  PW4G-112-A72-347
Page 17
UTC/P&W PROPRIETARY INFORMATION
Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3).

### Page 20 (OCR)

SPECIAL ATTENTION AREA
VIEW B
B52672B
AREAS TO PERFORM ON-WING AND OFF-WING FPI
(FPI BETWEEN THE BOSSES, THIS IS THE SPECIAL ATTENTION AREA)
FIGURE 1 (SHEET 2 OF 2)
March 31/17  PW4G-112-A72-347
• REVISION NO. 4 - September 1/22  Page 18
UTC/P&W PROPRIETARY INFORMATION
Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3).

### Page 21 (OCR)

LOOP CLAMP  LOOP CLAMP  LOOP CLAMP
BOLT  BRACKET  BRACKET BOLT
ST1411-08  57T142-01  MS9576-09  NUT
(REFERENCE)  (REFERENCE)  (REFERENCE)  793423
(REFERENCE)
AP41
(REFERENCE)
T3
50U448 QTY (4)  (REFERENCE)  THERMOCOUPLE  PROBE STUDS  50U677-01  THERMOCOUPLE  BRACKET  (REFERENCE)  ST1353-12  (REFERENCE)  THERMOCOUPLE  BRACKET  BOLT
B526726C
PHOTO OF T3 THERMOCOUPLE PROBE INSTALLED WITH T3 THERMOCOUPLE
CABLE AND T3 THERMOCOUPLE BRACKET
FIGURE 2
March 31/17  PW4G-112-A72-347
| REVISION NO. 4 - September 1/22  Page 19
UTC/P&W PROPRIETARY INFORMATION
Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3).

### Page 22

AREAS
T
O
PERFORM
MODULE
LEVEL
FPI
FIGURE
3
T
ABLE
4:
OUTER
DIFFUSER
CASE
EXTERNAL
BRACKETS.
REFER
T
O
FIGURE
3
FOR
LOCA
TIONS
LOCA
TION
PW4074D,
PW4077D,
PW4084D,
PW4090,
AND
PW4090-3
(BRACKET
PN)
PW4074
AND
PW4077
(BRACKET
PN)
1
51U031-01
54T313-01
(OR)
50U774-01
2
50J830-01
(AND)
50U476-01
50J830-01
(OR)
50J990-01
3
57T685-01
57T685-01
4
56T991-01
56T991-01
5
50U776-01
(AND)
50U775-01
59T946-01
OR
50U776-01
(AND)
59T947-01
OR
50U775-01
6
NA
NA
7
57T142-01
57T142-01
8
50U769-01
55T300-01
9
50U757-01
58T577-01
(OR)
50U757-01
10
50U758-01
58T533-01
(OR)
50U758-01
l
March
31/17
PW4G-1
12-A72-347
REVISION
NO.
4
-
September
1/22
Page
20
UTC/P&W
PROPRIET
AR
Y
INFORMA
TION
Not
subject
to
the
EAR
per
15
C.F
.R.
Chapter
1,
Part
734.3(b)(3).

### Page 23 (OCR)

FPI DATA COLLECTION FORM
(SUBMIT TO P&W FIELD REPRESENTATIVE)
DATE:
CASE PN: (CIRCLE ONE)  50J775  OR  50J930
CASE SN:
PERFORMED: (CIRCLE ONE)  ON-WING  OFF-WING  MODULE LEVEL
CASE TOTAL TIME:
CASE TOTAL CYCLES:
CASE TIME SINCE OVERHAUL:
CASE CYCLES SINCE OVERHAUL:
CRACK(S) FOUND: (CIRCLE ONE)  YES*  NO
*IF YES, INDICATE LOCATION(S) AND DRAW CRACK(S) ON MAP BELOW
270  180°
10  8
0° = TOP DEAD CENTER (TDC)
B526728
FPI DATA COLLECTION FORM
FIGURE 4
March 31/17  PW4G-112-A72-347
• REVISION NO. 4 - September 1/22  Page 21
UTC/P&W PROPRIETARY INFORMATION
Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3).

### Page 24

Appendix
Added
Data
Internal
Reference
Information
Revision
No.
Reference
Document
Origination
Original
EA17KC158,
EA17KC158A
RG/RCM
1
EA
17KC158B,
EA17KC158C,
EA17KC158D
RG/RCM
2
EC18KC532
EA19KC165
EDD/RCM
3
EA19KC546
NPC/JEJ
4
EA19KC546
WR/GBK/T
AF/A
TG
Number
values
shown
in
parentheses
adjacent
to
U.S.
values
are
International
System
of
units
(SI)
equivalents.
T
o
calculate
part
life,
include
the
hours
and/or
cycles
since
the
part
was
made.
Use
the
total
hours
or
cycles
to
calculate
life
limits
that
are
the
result
of
part
modification,
a
part
used
in
an
engine
with
dif
ferent
thrust,
or
for
some
other
reason.
Reference
9,
F
AA
Alternate
Method
of
Compliance
(AMOC)
letter
follows:
l
March
31/17
PW4G-1
12-A72-347
REVISION
NO.
4
-
September
1/22
Page
22
UTC/P&W
PROPRIET
AR
Y
INFORMA
TION
Not
subject
to
the
EAR
per
15
C.F
.R.
Chapter
1,
Part
734.3(b)(3).

### Page 25 (OCR)

U,S, Department  Compliance and Airworthiness Division  ECO Branch  1200 District Avenue
of Transportation  Burlington, MA 01803
Federal Aviation  (781) 238-7140. Fax: (781) 238-7109
Administration
July 20, 2022
Chong Park
PW4000-112 Global Fleet Chief
400 Main Street
East Hartford, CT, 06108
USA
Subject: Pratt & Whitney Global Alternative Method of Compliance (AMOC) to
Airworthiness Directive (AD) 2018-02-10
Dear Chong Park:
The Federal Aviation Administration (FAA) ECO Branch received your email dated June
16, 2022, requesting a Global AMOC to AD 2018-02-10, paragraphs (g)(3)(i) and
(g)(3)(ii) for the Pratt & Whitney (PW) PW4074, PW4074D, PW4077, PW4077D,
PW4084D, PW4090, and PW4090-3 model turbofan engines.
AD 2018-02-10 requires an initial and repetitive fluorescent penetrant inspection (FPI) of
the outer diffuser case (ODC) at the T3 thermocouple probe boss (It boss). The initial
FPI is required prior to accumulating 13,000 cycles since new (CSN) or within 1,000
cycles of the effective date of the AD, whichever occurs later and the repetitive FPI is
required within 2,000 flight cycle since the last FPI
Paragraph (g)()(1) of AD 2018-02-10 is applicable to on-wing engine ODC with FPI
indication at the Tt3 boss. Paragraph (g)(3)(ii) of AD 2018-02-10 is applicable to ODC
with FPI indication at the Tt3 boss on assembled engines not installed on-wing. Both
paragraphs (g)()(1) and (g)G)(11) of AD 2018-02-10 mandate the use of specific
Accomplishment Instructions service limit tables in PW Alert Service Bulletin (ASB)
PW4G-112-A72-347, dated March 31, 2017, to re-inspect and remove any ODC with FPI
ASB PW4G-112-A72-347, dated March 31, 2017, will be superseded by ASB PW4G-112-
A72-347 Revision 4 (revised ASB). PW AMOC proposal would use the applicable
Accomplishment Instructions service limit tables in the revised ASB, to re-inspect and
remove the ODC, for compliance with paragraph (g)(3)(i) and (g)(3)(ii), respectively, in
place of ASB PW4G-112-A72-347, dated March 31, 2017.
Also the revised ASB will reduce the initial FPI inspection cycle requirement of the ODC
at the Tt3 boss from 13,000 CSN to 9,200 CSN with adjustments to the initial FPI
drawdown limits.

### Page 26 (OCR)

The ECO Branch has reviewed PW draft Engineering Authorization 19KC546 and the
revised ASB, and determined that an acceptable level of safety is maintained by reducing
the ODC initial FPI inspection cycle requirement from 13,000 CSN to 9,200 CSN
including adjustments to the initial FPI drawdown limits. We also determined that an
acceptable level of safety is maintained by allowing the use of the revised ASB in place of
ASB PW4G-112-A72-347, dated March 31, 2017 because the revised ASB will allow the
actions required by AD 2018-02-10 paragraphs (E)()(1) and (g)(3)(u) to be performed as
intended. We approve your Global AMOC proposal to:
-AD 2018-02-10, paragraph (g)(3)(i) to require engines installed on-wing to re-
inspect and remove the ODC with any FPI indication at the Tt3 boss in accordance
with the Accomplishment Instructions, Part A, paragraph 1. G., of the revised ASB,
-AD 2018-02-10, paragraph (g)(3)(ii) to require assembled engines not installed on-
wing to re-inspect and remove the ODC with any FPI indication at the Tt3 boss in
accordance with the Accomplishment Instructions, Part B. paragraph 1. C., of the
revised ASB, and
-Reduce the initial FPI inspection cycle requirement of the ODC at the Tt3 boss
from 13,000 CSN to 9,200 CSN, the adjustments to the initial FPI drawdown limits
are as follows:
• For ODC with less than 9,200 CSN, perform an initial FPI before reaching
9,200 CSN or within 1,000 cycles of the issue date of the revised ASB.
whichever occurs later.
• For ODC with more than 9,200 CSN and less than 13,000 CSN on the issue
date of the revised ASB. perform an initial FPI within 1,000 cycles of the
issue date of the revised ASB.
• For ODC with unknown CSN or 13,000 cycles or more since new, the
initial inspection will be performed within 50 cycles from the issue date of
the revised ASB.
This Global AMOC is applicable to PW4074, PW4074D, PW4077, PW4077D, PW4084D,
PW4090, and PW4090-3 model turbofan engines.
This FAA AMOC is transferable with the aircraft to another owner/operator who operates
the aircraft under U.S. registry.
Before using this AMOC, notify your appropriate principal inspector, or lacking a
principal inspector, the manager of the local Flight Standards District Office/Certificate
Holding District Office.
The preceding paragraph also applies to any applicable foreign-registered aircraft upon
transfer of the aircraft to the U.S. registry if compliance with the AMOC has not been
accomplished.

### Page 27 (OCR)

3
All provisions of FAA AD 2018-02-10 that are not specifically referenced above remain
fully applicable and must be complied with accordingly.
This AMOC only applies to the FAA AD listed above. The FAA does not have the
authority to approve this as an AMOC to any AD issued by another civil aviation authority
(CAA). Approval of an AMOC to another CAA's AD must come from that CAA. A copy
of this response will be forwarded to the CAA where these aircraft are registered for their
consideration.
If you have any questions or need additional information, please contact Carol Nguyen at
telephone 781-238-7655, fax 781-238-7199, or electronic mail at carol.nguyen@faa.gov.
Sincerely.
MARTIN B  Digitally signed by MARTIN B  ADLER
ADLER  Date: 2022.0720 11:21:52  -04/00"
(For)
Tomasz Rakowski
Manager, ECO Branch
Compliance and Airworthiness Division
cc.  FAA AEG: Joseph R White@faa.gov
EASA:  ads@easa.europa.eu
TCCA:  tc.altmeansofcompliance-autresmoyensdeconformite.tc@tc.gc.ca
ANAC:  mario.igawa@anac.gov.br
CAAC:  zm_yang@caac.gov.cn; shs_ad@caac.gov.cn
JCAB:  hqt-ad_jcab@gxb.mlit.go.jp
UK-CAA:  Continued.Airworthiness@caa.co

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
