# Recaro Service Bulletin 3510-25-752

Copy: No revision named ("Recaro 3510-25-752"), 23 pages: PDF https://openairdocs.org/files/sha256/f2/77/f277be6c9143eb0ebd7abb5e7e9ab882ce1061967d1ee64ce6c23edd14e6ede0; text https://openairdocs.org/service-documents/recaro/sb-3510-25-752/file/f277be6c9143.md. Rights: © Recaro. Filed by the FAA in regulations.gov docket FAA-2018-1019; AD 2019-08-01 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Recaro](https://openairdocs.org/service-documents/recaro.md)
- Type: Service bulletin (Service Bulletin)
- Number: 3510-25-752
- Page: https://openairdocs.org/service-documents/recaro/sb-3510-25-752

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2019-08-01](https://openairdocs.org/ad/2019-08-01.md), effective May 21, 2019: No revision named

## Text (23 pages)

Rights: © Recaro. Filed by the FAA in regulations.gov docket FAA-2018-1019; AD 2019-08-01 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

RECARO
RECARO Aircraft Seating GmbH & Co. KG • Daimlerstrasse 21 • 74523 Schwäbisch Hall • Germany • CAGE: C1084
SERVICE BULLETIN
RECARO Aircraft Seating  ATA Chapter: 25
Seat Type 3510A
Series 377 and 381
EQUIPMENT/FURNISHINGS - PASSENGER SEATS -
Exit Seat Pan
Remove straps and replace seat pan assy
Prepared by: J. Bohnacker  on Plan  May 20/2016
Customer Service Publications
Checked by: P. Biernoth .  P an  Jul 06/16
Platforms Engineering Management
Checked by: R. Hey Ca/AROL.  O7 To 201.6
Certification/Airworthiness Office
Approved by: R. Eitmann .  2 Juan.  Yul 26  9, 2010
Technical Service Engineering
Name  Signature  Date
FV 7.3-04 Ind.01en
ORIGINALLY ISSUED: May 20/2016  SB NO.: 3510-25-752
REVISION NO.:  Page 1 of 22

### Page 2

RECARO Aircraft Seating GmbH & Co. KG • Daimlerstrasse 21 • 74523 Schwäbisch Hall • Germany • CAGE: C1084 
SERVICE BULLETIN 
ORIGINALLY ISSUED:  May 20/2016 SB NO.: 3510-25-752 
REVISION NO.:           Page 2 of 22 
    
FV 7.3-04 Ind.01en  
TABLE OF CONTENTS 
ABBREVIATIONS .....................................................................................................................................................4 
1. PLANNING INFORMATION .............................................................................................................................5 
A. EFFECTIVITY ...........................................................................................................................................5 
B. CONCURRENT REQUIREMENTS ...........................................................................................................7 
C. REASON ...................................................................................................................................................7 
D. DESCRIPTION ..........................................................................................................................................7 
E. COMPLIANCE ...........................................................................................................................................7 
F. APPROVAL ...............................................................................................................................................8 
G. MANPOWER .............................................................................................................................................8 
H. WEIGHT AND BALANCE..........................................................................................................................9 
I. ELECTRICAL LOAD DATA .......................................................................................................................9 
J. SOFTWARE ACCOMPLISHMENT SUMMARY .......................................................................................9 
K. REFERENCES ..........................................................................................................................................9 
L. OTHER PUBLICATIONS AFFECTED ................................................................................................... 10 
M. INTERCHANGEABILITY OR INTERMIXABILITY OF PARTS .............................................................. 10 
2. MATERIAL INFORMATION ........................................................................................................................... 11 
A. MATERIAL – PRICE AND AVAILABILITY ............................................................................................. 11 
B. INDUSTRY SUPPORT INFORMATION ................................................................................................ 12 
C. MATERIAL NECESSARY FOR EACH COMPONENT .......................................................................... 12 
D. MATERIAL NECESSARY FOR EACH SPARE ..................................................................................... 12 
E. REIDENTIFIED PARTS ......................................................................................................................... 12 
F. TOOLING ............................................................................................................................................... 13 
3. ACCOMPLISHMENT INSTRUCTIONS ......................................................................................................... 14 
A. GENERAL .............................................................................................................................................. 14 
B. DISASSEMBLY ...................................................................................................................................... 14 
C. MODIFICATION ..................................................................................................................................... 14 
D. ASSEMBLY ............................................................................................................................................ 17 
E. RE-IDENTIFICATION ............................................................................................................................. 18 
F. TEST ...................................................................................................................................................... 18 
G. ACCOMPLISHMENT REPORTING ....................................................................................................... 19

### Page 3

RECARO Aircraft Seating GmbH & Co. KG • Daimlerstrasse 21 • 74523 Schwäbisch Hall • Germany • CAGE: C1084 
SERVICE BULLETIN 
ORIGINALLY ISSUED:  May 20/2016 SB NO.: 3510-25-752 
REVISION NO.:           Page 3 of 22 
    
FV 7.3-04 Ind.01en  
4. ILLUSTRATIONS ........................................................................................................................................... 20 
TABLE OF FIGURES 
Figure 1 Seat base with exit sheet straps ........................................................................................................ 20 
Figure 2 Exit sheet assembly with strap ........................................................................................................... 21 
Figure 3 Removal of existing seat bottom pan ................................................................................................. 21 
Figure 4 Installation of new seat bottom pan ................................................................................................... 22 
LIST OF TABLES 
Table 1 Abbreviations........................................................................................................................................ 4 
Table 2 Affected Seat P/N (certified by Airbus) ................................................................................................ 5 
Table 3 Affected Seat P/N (not certified by Airbus) .......................................................................................... 6 
Table 4 Modification placard ........................................................................................................................... 11 
Table 5 Mod-Kit 3510MK752-02 ..................................................................................................................... 11 
Table 6 Material required per TPL seat assembly .......................................................................................... 12

### Page 4

RECARO Aircraft Seating GmbH & Co. KG • Daimlerstrasse 21 • 74523 Schwäbisch Hall • Germany • CAGE: C1084 
SERVICE BULLETIN 
ORIGINALLY ISSUED:  May 20/2016 SB NO.: 3510-25-752 
REVISION NO.:           Page 4 of 22 
    
FV 7.3-04 Ind.01en  
ABBREVIATIONS 
Table 1 Abbreviations 
A/C Aircraft  
AR As required (quantity indication)  
CMM Component Maintenance Manual  
CTR Center  
DBL Double  
DC Design Change  
DCP Design Change Proposal  
DDP Declaration of Design and Performance  
ESD Electrostatic discharge  
FIG Figure  
FR Front row  
HC Handicap locking mechanism on armrests  
IAT In-armrest table  
IFE In-flight entertainment  
IPL Illustrated Parts List (included in CMM for the affected seat series)  
LH Left-hand  
LOPA Layout of Passenger Accomodation  
LR Last row  
LRU Line Replaceable Unit  
MK Modification Kit  
MSDS Material Safety Data Sheet  
n/a Not applicable  
P/N Part number  
PDF Portable Document Format (a common file format for exchanging fixed-layout documents)  
QC Quick-change  
RAS RECARO Aircraft Seating  
RH Right-hand  
S/N Serial number  
S/S Shipset  
SB Service Bulletin  
STD Standard (seat version)  
STS Seat-to-seat (e.g. for power and data cables)  
SW Software  
TDS Technical Data Sheet  
TPL Triple

### Page 5

RECARO Aircraft Seating GmbH & Co. KG • Daimlerstrasse 21 • 74523 Schwäbisch Hall • Germany • CAGE: C1084 
SERVICE BULLETIN 
ORIGINALLY ISSUED:  May 20/2016 SB NO.: 3510-25-752 
REVISION NO.:           Page 5 of 22 
    
FV 7.3-04 Ind.01en  
1. PLANNING INFORMATION 
A. EFFECTIVITY 
This Service Bulletin is applicable to the RECARO Type 3510A seats of Series 377 
and 381 which are listed in Sections (1) and (2) below.      
NOTE: Refer to Section F on page 8 for applicable SB approval statements. 
(1) Seat P/N certified by Airbus 
Table 2 Affected Seat P/N (certified by Airbus) 
Seat P/N 
(Pre-Modification) 
Modification (all seat places) 
Seat P/N 
(Post-Modification)  Remove 
Exit Sheet Straps 
Replace Seat 
Bottom Pan Assy 
3510A377-31-241 No Yes 3510A377-31-441  
3510A377-31-243 No Yes 3510A377-31-443  
3510A377-31-343 * Yes Yes 
3510A377-31-251 No Yes 3510A377-31-451  
3510A377-31-253 No Yes 3510A377-31-453  
3510A377-31-353 * Yes Yes 
3510A377-31-272 No Yes 3510A377-31-472  
3510A377-31-372 * Yes Yes 
3510A377-31-282 No Yes 3510A377-31-482  
3510A377-31-382 * Yes Yes 
3510A377-31-293 No Yes 3510A377-31-493  
3510A377-31-303 No Yes 3510A377-31-503  
3510A377-32-241 No Yes 3510A377-32-441  
3510A377-32-243 No Yes 3510A377-32-443  
3510A377-32-343 * Yes Yes 
3510A377-32-251 No Yes 3510A377-32-451  
3510A377-32-253 No Yes 3510A377-32-453  
3510A377-32-353 * Yes Yes 
3510A377-32-272 No Yes 3510A377-32-472  
3510A377-32-372 * Yes Yes 
3510A377-32-282 No Yes 3510A377-32-482  
3510A377-32-382 * Yes Yes 
3510A377-32-293 No Yes 3510A377-32-493

### Page 6

RECARO Aircraft Seating GmbH & Co. KG • Daimlerstrasse 21 • 74523 Schwäbisch Hall • Germany • CAGE: C1084 
SERVICE BULLETIN 
ORIGINALLY ISSUED:  May 20/2016 SB NO.: 3510-25-752 
REVISION NO.:           Page 6 of 22 
    
FV 7.3-04 Ind.01en  
Seat P/N 
(Pre-Modification) 
Modification (all seat places) Seat P/N 
(Post-Modification)  Remove Exit Sheet Straps Replace Seat Bottom Pan Assy 
3510A377-32-303 No Yes 3510A377-32-503  
3510A381-31-221 No Yes 3510A381-31-421  
3510A381-31-321 * Yes Yes 
3510A381-32-221 No Yes 3510A381-32-421  
3510A381-32-321 * Yes Yes 
3510A381-31-231 No Yes 3510A381-31-431  
3510A381-31-331 * Yes Yes 
3510A381-32-231 No Yes 3510A381-32-431  
3510A381-32-331 * Yes Yes 
* Seat P/N marked with an asterisk (*) are post-implementation P/N of SB 3510-25-566 (“Exit Seat Pan 
Changes: Attachment with Plastic Tyrap”), created by modification of the seats with P/N written above. 
SB 3510-25-566 shall no longer be implemented. Refer to 1.B “CONCURRENT REQUIREMENTS”. 
(2) Seat P/N not certified by Airbus 
NOTE: The Seat P/N listed in Table 3 below are affected by this Service Bulletin 
but are not certified by Airbus. 
NOTE: All Pre-Mod. Seat P/N listed in Table 3 are post-implementation P/N of 
SB 3510-25-566 (“Exit Seat Pan Changes: Attachment with Plastic 
Tyrap”), which shall no longer be implemented. Refer to Section 1.B 
“CONCURRENT REQUIREMENTS” below. 
Table 3 Affected Seat P/N (not certified by Airbus) 
Seat P/N 
(Pre-Modification) 
Modification (all seat places) 
Seat P/N 
(Post-Modification)  Remove 
Exit Sheet Straps 
Replace Seat 
Bottom Pan Assy 
3510A377-31-351 Yes Yes 3510A377-31-451  
3510A377-32-351 Yes Yes 3510A377-32-451  
3510A377-31-341 Yes Yes 3510A377-31-441  
3510A377-32-341 Yes Yes 3510A377-32-441  
3510A377-31-393 Yes Yes 3510A377-31-493  
3510A377-32-393 Yes Yes 3510A377-32-493  
3510A377-31-403 Yes Yes 3510A377-31-503  
3510A377-32-403 Yes Yes 3510A377-32-503

### Page 7

RECARO Aircraft Seating GmbH & Co. KG • Daimlerstrasse 21 • 74523 Schwäbisch Hall • Germany • CAGE: C1084 
SERVICE BULLETIN 
ORIGINALLY ISSUED:  May 20/2016 SB NO.: 3510-25-752 
REVISION NO.:           Page 7 of 22 
    
FV 7.3-04 Ind.01en  
B. CONCURRENT REQUIREMENTS 
(1) Please verify if the implementation of SB 3510-25-643 ("Fixation of Inner 
Beams") is pending for any of the seat assemblies listed in Section 1.A above. 
Simultaneous accomplishment is strongly recommended in this case. 
(2) Do NOT implement SB 3510-25-566 on any affected seat assembly if not yet 
accomplished. 
NOTE: Service Bulletin 3510-25-566 will be invalidated. Exit Sheet Straps 
installed in accordance with SB 3510-25-566 will be removed during the 
implementation of this SB. 
C. REASON 
RECARO type 3510 seats installed at a type III over-wing exit are subject to special 
requirements, e.g. in regards to evacuation of the aircraft. In order to fulfill these 
requirements, this Service Bulletin is due to be executed for all seat assemblies listed 
in Table 2 and Table 3 in Section 1.A “EFFECTIVITY”. 
D. DESCRIPTION 
(1) Although seats located at emergency exits are equipped with LH and RH exit 
sheets to support each seat bottom pan, RECARO decided to implement an 
additional exit sheet strap below the pan. Seat assemblies equipped with exit 
sheet straps are marked with “Yes” in column “Remove Exit Sheet Straps” of 
Table 2 and Table 3 in Section 1.A “EFFECTIVITY”. Because exit sheet straps 
may break in service in very limited cases, this Service Bulletin provides 
instructions to remove the straps, where currently installed. 
(2) On all seat assemblies for which this SB is effective, regardless if previously 
equipped with exit sheet straps or not, the seat pan assemblies including the 
corresponding attachment packages are replaced with a different version. 
E. COMPLIANCE 
The modification described in this Service Bulletin is highly recommended and shall 
be performed at the earliest opportunity when manpower and facilities are available.

### Page 8

RECARO Aircraft Seating GmbH & Co. KG • Daimlerstrasse 21 • 74523 Schwäbisch Hall • Germany • CAGE: C1084 
SERVICE BULLETIN 
ORIGINALLY ISSUED:  May 20/2016 SB NO.: 3510-25-752 
REVISION NO.:           Page 8 of 22 
    
FV 7.3-04 Ind.01en  
F. APPROVAL 
The technical content of this document is approved under the authority of DOA ref. 
EASA.21J.031. 
NOTE: The preceding approval statement is only applicable for Seat P/N listed in 
Table 2 in Section 1.A(1) from page 5. 
This document contains information and instructions which were produced according 
to alternative procedure of DOA AP110. 
See EASA Approval No. EASA Approval No. EASA.21O.172 Rev. A. 
Further airworthiness approvals may be required for aircraft installation purposes and 
are under the responsibility of the operator or installer to comply with. 
G. MANPOWER 
NOTE: This Section provides estimates of the time required to do the work which is 
described in this Service Bulletin, in order to facilitate work planning. These 
estimates assume that the work will be done by experienced personnel and 
do not include the time to prepare, plan, or inspect the work. Time required for 
procurement of parts and tools, drying or curing time for paints, adhesives 
and cleaning agents, as well as general administration is also not included. 
NOTE: Unsolicited reimbursement claims to RECARO for labor cost and/or related 
expenses will not be accepted, neither based on estimates in this SB nor in 
related documents. Written consent by RECARO, including the actual time 
and cost to be reimbursed, is always required per each claim prior to it being 
issued to RECARO. Please contact RECARO prior to implementing this SB 
for a confirmation of refundable expenses, if any are expected. 
Approx. modification time per TPL seat assembly (average value): 
(1) For seat assemblies equipped with Exit Sheet Straps (marked with  
“Yes” in column “Remove Exit Sheet Straps” of Table 2 or Table 3): 
 Method 1: Unrivet the blind rivets: 0.43 man-hours 
 Method 2: Cut along the edges of the exit sheets: 0.35 man-hours

### Page 9

RECARO Aircraft Seating GmbH & Co. KG • Daimlerstrasse 21 • 74523 Schwäbisch Hall • Germany • CAGE: C1084 
SERVICE BULLETIN 
ORIGINALLY ISSUED:  May 20/2016 SB NO.: 3510-25-752 
REVISION NO.:           Page 9 of 22 
    
FV 7.3-04 Ind.01en  
(2) For seat assemblies without Exit Sheet Straps (marked with  
“No” in column “Remove Exit Sheet Straps” of Table 2 or Table 3): 
 Replacement of seat bottom pans only: 0.25 man-hours 
H. WEIGHT AND BALANCE 
(1) For seat assemblies equipped with Exit Sheet Straps (marked with  
“Yes” in column “Remove Exit Sheet Straps” of Table 2 or Table 3): 
 Per TPL seat assembly (approx.): No change 
(2) For seat assemblies without Exit Sheet Straps (marked with “No”  
in column “Remove Exit Sheet Straps” of Table 2 or Table 3): 
 Per TPL seat assembly (approx.): +0.105 kg (+0.231 lb.) 
I. ELECTRICAL LOAD DATA 
n/a 
 
J. SOFTWARE ACCOMPLISHMENT SUMMARY 
n/a 
 
K. REFERENCES 
(1) Aircraft Modification and Aircraft Service Bulletin 
This Service Bulletin is subject to aircraft modification N° 158410 K18421 
(classified minor) and is covered by aircraft Service Bulletin N° A320-25-1BD7. 
Under no circumstances shall the modified equipment, resulting from the 
application of this SB, be installed on the aircraft type unless its aircraft SB is 
approved. 
NOTE: The preceding reference with accompanying statements is only 
applicable for Seat P/N listed in Table 2 in Section 1.A(1) from page 5.

### Page 10

RECARO Aircraft Seating GmbH & Co. KG • Daimlerstrasse 21 • 74523 Schwäbisch Hall • Germany • CAGE: C1084 
SERVICE BULLETIN 
ORIGINALLY ISSUED:  May 20/2016 SB NO.: 3510-25-752 
REVISION NO.:           Page 10 of 22 
    
FV 7.3-04 Ind.01en  
(2) COMPONENT MAINTENANCE MANUAL WITH IPL 
RECARO AIRCRAFT SEATING 
TYPE 3510A / SERIES 377 
ATA NO.: 25-25-69  
(3) COMPONENT MAINTENANCE MANUAL WITH IPL 
RECARO AIRCRAFT SEATING 
TYPE 3510A / SERIES 381  
ATA NO.: 25-25-61 
(4) DC No.:  0142-15 
(5) SB 3510-25-566 (for Seat P/N marked with an asterisk in Table 2 on page 5, 
and all Seat P/N listed in Table 3 on page 6) 
L. OTHER PUBLICATIONS AFFECTED 
(1) COMPONENT MAINTENANCE MANUAL WITH IPL 
RECARO AIRCRAFT SEATING 
TYPE 3510A / SERIES 377 
ATA NO.: 25-25-69  
(2) COMPONENT MAINTENANCE MANUAL WITH IPL 
RECARO AIRCRAFT SEATING 
TYPE 3510A / SERIES 381  
ATA NO.: 25-25-61 
M. INTERCHANGEABILITY OR INTERMIXABILITY OF PARTS 
(1) For Seat P/N listed in Table 2 from page 5: 
Refer to Aircraft Service Bulletin No. A320-25-1BD7. 
NOTE: Some of the post-modification Seat P/N of seat assemblies listed in 
Table 3 are identical to a post-modification Seat P/N listed in Table 2. 
(2) Modified seat assemblies may only be installed as defined in the applicable 
LOPA per each Seat P/N.

### Page 11

RECARO Aircraft Seating GmbH & Co. KG • Daimlerstrasse 21 • 74523 Schwäbisch Hall • Germany • CAGE: C1084 
SERVICE BULLETIN 
ORIGINALLY ISSUED:  May 20/2016 SB NO.: 3510-25-752 
REVISION NO.:           Page 11 of 22 
    
FV 7.3-04 Ind.01en  
2. MATERIAL INFORMATION 
A. MATERIAL – PRICE AND AVAILABILITY 
The following items are required to accomplish the modification. 
NOTE: Please contact RECARO for detailed pricing and availability information. 
(1) Modification Placard 
NOTE: One modification placard per seat assembly is required and must be 
ordered separately. Refer to Section 3.D(1) on page 17 for application. 
Table 4 Modification placard 
RECARO P/N Description Qty. per Seat Assy  
137-00-003-31 Placard (Modification) incl. Mylar cover 1  
 
(2) Modification Kits 
Table 5 Mod-Kit 3510MK752-02 
Modification Kit 3510MK752-02 (1 x per Seat Place = 3 x per TPL Seat Assy)  
Item P/N Description Qty.  
   10 139-00-242-10 Seat bottom assy 1  
   20 139-00-241-02 Spacer sleeve 4  
   30 * 045205AN Loop tape 50 light gray RKN102D050B 0.36 m  
   40 * 304-50-235-72 Loop tape self-adhesive, 50mm, beige, Klettostar 15244 0.11 m  
   50 104277 Clamp, ZEBRA B9MM-SW7 40-60 4  
   60 * 029254 Adhesive tape, Mercatape A 3700, 19mm 0.1 m  
* Adhesive tapes are available in packaging units of 50 m each.

### Page 12

RECARO Aircraft Seating GmbH & Co. KG • Daimlerstrasse 21 • 74523 Schwäbisch Hall • Germany • CAGE: C1084 
SERVICE BULLETIN 
ORIGINALLY ISSUED:  May 20/2016 SB NO.: 3510-25-752 
REVISION NO.:           Page 12 of 22 
    
FV 7.3-04 Ind.01en  
B. INDUSTRY SUPPORT INFORMATION 
Inquiries concerning this Service Bulletin may be directed to: 
RECARO Aircraft Seating GmbH & Co. KG 
Customer Service Technical Publications 
Daimlerstrasse 21 
74523 Schwaebisch Hall 
GERMANY 
Phone: +49 791 503 7855 
Fax: +49 791 503 7935 
Email: Service-Publications@recaro-as.com 
C. MATERIAL NECESSARY FOR EACH COMPONENT 
Table 6 Material required per TPL seat assembly 
RECARO P/N Description Qty. per TPL Seat Assy  
137-00-003-31 Placard (Modification) incl. Mylar cover 1  
3510MK752-02 Modification Kit 3  
NOTE: Refer to Section 2.A from page 11 for Mod-Kit contents. 
D. MATERIAL NECESSARY FOR EACH SPARE 
This SB is applicable for all seat assemblies listed in Section 1.A “EFFECTIVITY” 
regardless if these seats are in active service or being kept in stock as spare items. 
E. REIDENTIFIED PARTS 
All modified seat assemblies receive new P/N. Refer to Table 2 from page 5 and 
Table 3 from page 6 for pre-modification vs. post-modification Seat P/N. 
NOTE: Refer to Section 3.E “RE-IDENTIFICATION” on page 17 for re-identification of 
seat assemblies by application of the modification placard.

### Page 13

RECARO Aircraft Seating GmbH & Co. KG • Daimlerstrasse 21 • 74523 Schwäbisch Hall • Germany • CAGE: C1084 
SERVICE BULLETIN 
ORIGINALLY ISSUED:  May 20/2016 SB NO.: 3510-25-752 
REVISION NO.:           Page 13 of 22 
    
FV 7.3-04 Ind.01en  
F. TOOLING 
(1) Special Tools 
not required 
(2) Standard Tools 
The following standard tools are required: 
(a) Common set of mechanical hand tools 
(b) For removal of Exit Sheet Straps, depending on the method applied  
(refer to Section 3.C “MODIFICATION” on page 14): 
1 For drilling out rivets (method 1): Electric or pneumatic power drill. 
2 For cutting the straps (method 2): Multi purpose shear or electric or 
pneumatic universal cutter/shear. 
NOTE: Power tools should be equipped with dust extraction. 
3 For both methods:  
a Protective foils to prevent contamination of the seat assembly, and 
if implemented in aircraft, also of the surrounding area. 
b Vacuum cleaner to remove cutting chips and dust. 
(3) Personal Protective Equipment (PPE): 
(a) Protective gloves and goggles for drilling/cutting work.

### Page 14

RECARO Aircraft Seating GmbH & Co. KG • Daimlerstrasse 21 • 74523 Schwäbisch Hall • Germany • CAGE: C1084 
SERVICE BULLETIN 
ORIGINALLY ISSUED:  May 20/2016 SB NO.: 3510-25-752 
REVISION NO.:           Page 14 of 22 
    
FV 7.3-04 Ind.01en  
3. ACCOMPLISHMENT INSTRUCTIONS 
A. GENERAL 
(1) The respective CMM according to Section 1.K on page 9 must be present and 
utilized during this modification. 
(2) Illustrations are provided in Chapter 4 from page 20. Additionally, refer to 
Chapter IPL of the CMM. 
(3) Accomplishment instructions refer to the modification of one seat assembly. 
Repeat the complete procedure for each affected seat assembly to be modified. 
(4) Refer to Table 2 from page 5 and Table 3 from page 6 for pre-modification vs. 
post-modification Seat P/N. 
(5) All parts which are to be reused should be marked with their installation position 
before disassembly in order to facilitate subsequent assembly. 
(6) Keep all uninstalled items for reinstallation unless specifically noted otherwise. 
B. DISASSEMBLY 
(1) Remove each seat bottom cushion with dress cover and keep it assigned to the 
same seat place while being stored for subsequent reinstallation. 
NOTE: The cushions are attached to the seat bottom with hook and loop tapes. 
C. MODIFICATION 
(1) Remove each seat bottom pan. Refer to Figure 3 on page 21: 
(a) In case the seat bottom pan is secured to the rear seat beam with cable 
ties, cut and remove these cable ties before proceeding. 
(b) Pull up the rear edge of the seat bottom pan to disengage the attachment 
clips from the rear seat beam. 
(c) Cut and remove the cable ties by which the seat bottom pan is secured to 
the front beam.

### Page 15

RECARO Aircraft Seating GmbH & Co. KG • Daimlerstrasse 21 • 74523 Schwäbisch Hall • Germany • CAGE: C1084 
SERVICE BULLETIN 
ORIGINALLY ISSUED:  May 20/2016 SB NO.: 3510-25-752 
REVISION NO.:           Page 15 of 22 
    
FV 7.3-04 Ind.01en  
(d) Lift off the seat bottom pan with attachment clips from the seat base. 
NOTE: The seat bottom pan assembly will be completely replaced. Discard the 
removed seat bottom pan assembly or, if in serviceable condition, store 
it for other uses in accordance with the operator’s policy. 
(2) On Seat P/N which are marked with “Yes” in column “Remove Exit Seat Straps” 
of Table 2 or Table 3 (pages 5 thru 6), remove the strap from the exit sheet 
assembly underneath each seat bottom pan. Refer to Figure 1 and Figure 2: 
NOTE: For seat assemblies which are marked with “No” in column “Remove 
Exit Seat Straps” of Table 2 or Table 3, skip this Section and proceed 
with the instructions in Section (3) below. 
CAUTION: AVOID CONTAMINATION OF THE SEAT ASSEMBLY AND OF 
THE SURROUNDING AREA WITH DRILLING/CUTTING CHIPS 
AND DUST. USE SUITABLE COVERS AND TOOLS WITH 
VACUUM ATTACHMENTS AS REQUIRED. 
WARNING: ALWAYS WEAR PROTECTIVE GOGGLES AND GLOVES 
WHILE CUTTING METAL OR PLASTIC PARTS. 
(a) Choose and accomplish one of the following methods to remove the straps 
of the exit sheet assy on each seat place. Refer to Figure 1 and Figure 2: 
1 Method 1: Unrivet blind rivets 
a Drill out and remove all blind rivets (10 x) on LH and RH exit sheet. 
b Remove and discard the exit sheet strap. 
2 Method 2: Cut the exit sheet strap along the LH and RH exit sheets 
a Cut the exit sheet strap along the edges of the LH and RH exit 
sheets to which it is riveted, using a multi purpose shear or a 
powered universal cutter/shear. 
b If sharp edges remain from cutting and are considered to pose a 
risk of injury, these may be deburred with a suitable tool (e.g. file, 
abrasive paper or small electric grinding tool) as required. 
3 Remove chips and dust from the seat assembly and surrounding area.

### Page 16

RECARO Aircraft Seating GmbH & Co. KG • Daimlerstrasse 21 • 74523 Schwäbisch Hall • Germany • CAGE: C1084 
SERVICE BULLETIN 
ORIGINALLY ISSUED:  May 20/2016 SB NO.: 3510-25-752 
REVISION NO.:           Page 16 of 22 
    
FV 7.3-04 Ind.01en  
(3) On each seat place, install the new seat bottom pan assembly which is 
contained in the Mod-Kit. Refer to Figure 4 on page 22: 
NOTE: 1 x Mod-Kit P/N 3510MK752-02 is required per seat place. 
NOTE: Numbers in parentheses are item numbers of Mod-Kit 3510MK752-02. 
Refer to Table 6 on page 12. 
(a) Position the Seat bottom assy (10) approximately in installation position 
over the seat beams on the affected seat place, centered between the seat 
dividers, to determine which attachment positions can be used: 
1 Choose the 4 outer attachment positions as illustrated in Figure 4 if 
they are not obstructed on the seat beams. 
2 If a seat beam is obstructed by other items (attachments, clamps etc.) 
underneath the seat pan at an outer attachment position, choose the 
adjacent alternative (inner) attachment position instead. 
(b) Stick the 4 Spacer sleeves (20) to the determined attachment positions at 
the bottom of the Seat bottom assy (10), each with a 25 mm long piece of 
Adhesive tape (60). 
NOTE: Align each Spacer sleeve (20) with the outer “noses” up and 
forward as shown in Figure 4, to match the receptacles of the Seat 
bottom assy (10). 
(c) Place the Seat bottom assy (10) with attached 4 x Spacer sleeve (20) on 
the seat beams as shown in Figure 4, centered between the seat dividers 
(with a tolerance of +/- 3 mm). 
(d) Fasten the Seat bottom assy (10) to the seat beams by installing a Clamp 
(50) at the position of each Spacer sleeve (20): 
1 Align the lock of each Clamp (50) as illustrated in Figure 4, i.e. behind 
the front beam or in front of the rear beam, at an angle of approx. 45°. 
NOTE: In Figure 4, refer to the upper illustration for installation 
direction of each Clamp (50), and to the lower illustration (side 
view) for exact alignment when fastening. 
2 Tighten each Clamp (50) with 4 Nm (36 lb-in) +/- 1 Nm (8 lb-in).

### Page 17

RECARO Aircraft Seating GmbH & Co. KG • Daimlerstrasse 21 • 74523 Schwäbisch Hall • Germany • CAGE: C1084 
SERVICE BULLETIN 
ORIGINALLY ISSUED:  May 20/2016 SB NO.: 3510-25-752 
REVISION NO.:           Page 17 of 22 
    
FV 7.3-04 Ind.01en  
(e) Attach 2 x 55 mm Loop tape, 50 mm wide (40) to the upper surface of the 
Seat bottom assy (10) to cover the Clamps (50) at the rear attachment 
points. Refer to Figure 4. 
(f) Attach 2 x 60 mm Loop tape 50 mm light gray (30) to the rear seat beam at 
the rear attachment points to cover the Clamps (50). 
(g) Attach 2 x 120 mm Loop tape 50 mm light gray (30) around the front seat 
beam at the FWD attachment points to cover the Clamps (50). 
D. ASSEMBLY 
(1) Attach each seat bottom cushion with dress cover to the newly installed Seat 
bottom assy on  the same seat place from which it was previously removed. 
NOTE: The cushions are attached to the seat bottom with hook and loop tapes.

### Page 18

RECARO Aircraft Seating GmbH & Co. KG • Daimlerstrasse 21 • 74523 Schwäbisch Hall • Germany • CAGE: C1084 
SERVICE BULLETIN 
ORIGINALLY ISSUED:  May 20/2016 SB NO.: 3510-25-752 
REVISION NO.:           Page 18 of 22 
    
FV 7.3-04 Ind.01en  
E. RE-IDENTIFICATION 
(1) Stick an adhesive modification placard P/N 137-00-003-31 with the following 
data near to the identification plate of the seat assembly. 
Modification Placard 137-00-003-31 
 
  Write Seat Serial Number: XXXXXX 
  Write the Service Bulletin Number, the Service Bulletin Revision Level, and the date 
the modification is incorporated, separated by dashes: 
 SB No.: 752 (last three digits of SB No.) 
 Revision level of SB:    (empty for 0, or 1, 2, 3, ...) 
 Date of modification: MM/YY (month and year, e.g. 05/16) 
  
  If affected write new seat weight in kg:  XX.X 
  Write new Seat P/N 
(2) Cover the modification placard with the included clear Mylar tape. 
F. TEST 
n/a 
RECARO AIRCRAFT SEATING Serial-No: _______________ 
Modification:  ____________________ Weight:  ____________   kg 
Part Number:  _____________________________ P/N 137-00-003-31 
Example modification entry  for this SB: 752-05/16 
 
 
 


### Page 19

RECARO Aircraft Seating GmbH & Co. KG • Daimlerstrasse 21 • 74523 Schwäbisch Hall • Germany • CAGE: C1084 
SERVICE BULLETIN 
ORIGINALLY ISSUED:  May 20/2016 SB NO.: 3510-25-752 
REVISION NO.:           Page 19 of 22 
    
FV 7.3-04 Ind.01en  
G. ACCOMPLISHMENT REPORTING 
Report accomplishment of this SB to RECARO Aircraft Seating using the appended 
Service Bulletin Accomplishment Report form: 
(1) Print out one copy of the Service Bulletin Accomplishment Report form per each 
20 seat assemblies being modified. 
NOTE: When modifying seats determined for, or installed in, different aircraft, 
start a new Accomplishment Report sheet for each shipset/aircraft. 
Likewise, use a separate form for seat assemblies stored as spares. 
(2) Fill the header fields of the printed Accomplishment Report forms, insofar 
applicable, i.e. aircraft type, aircraft sign (tail sign or MSN), and the person or 
organization implementing the SB. 
NOTE: Write “Spare” or “t.b.d.” in field “A/C Sign” for seat assemblies not 
assigned to a specific aircraft. 
(3) After accomplishing this SB on any seat assembly, enter the following data in 
the Service Bulletin Accomplishment Report form: 
(a) Layout position in the aircraft (e.g. 10A), to which the seat is assigned. 
NOTE: Leave empty for seat assemblies not assigned to an aircraft. 
(b) Seat P/N prior to modification  
(c) Seat S/N as indicated on the seat identification placard. 
(d) Seat P/N after modification, as indicated in Table 2. 
(e) Enter any specific observations in column “Note”. 
(4) When all rows of the Accomplishment Report form are filled, or all seats from an 
aircraft/shipset or storage location are completed: 
(a) Complete the footer of the report form with date, signature and stamp.  
(b) Scan the signed Accomplishment Report to PDF and send it via email to 
Service-Report@recaro-as.com within 10 days after accomplishment. 
NOTE: Alternatively, the completed Accomplishment Reports may be sent 
to your Customer Service focal point at RECARO by postal mail.

### Page 20

RECARO Aircraft Seating GmbH & Co. KG • Daimlerstrasse 21 • 74523 Schwäbisch Hall • Germany • CAGE: C1084 
SERVICE BULLETIN 
ORIGINALLY ISSUED:  May 20/2016 SB NO.: 3510-25-752 
REVISION NO.:           Page 20 of 22 
    
FV 7.3-04 Ind.01en  
4. ILLUSTRATIONS 
 
Figure 1 Seat base with exit sheet straps 
* Exit sheet straps exist and are to be removed only on seat assemblies marked with “Yes”  
in column “Remove Exit Seat Straps” of Table 2 or Table 3 (pages 5 thru 6) 
Exit sheet 
(RH)
3510-609-1003-01
Exit sheet straps*
(remove if present)
Exit sheet 
(RH)
Exit sheet 
(RH)
Exit sheet (LH)
Exit sheet (LH)
Exit sheet 
(LH)

### Page 21

RECARO Aircraft Seating GmbH & Co. KG • Daimlerstrasse 21 • 74523 Schwäbisch Hall • Germany • CAGE: C1084 
SERVICE BULLETIN 
ORIGINALLY ISSUED:  May 20/2016 SB NO.: 3510-25-752 
REVISION NO.:           Page 21 of 22 
    
FV 7.3-04 Ind.01en  
 
Figure 2 Exit sheet assembly with strap 
 
Figure 3 Removal of existing seat bottom pan 
Method 2 for removal
of the Exit sheet strap:
Cut the strap along the
edges of the exit sheets
Method 1 for removal
of the Exit sheet strap:
Unrivet all blind rivets
Exit sheet (RH) Exit sheet (LH)
Blind rivet (5x) Blind rivet (5x)
3510-609-1002-01
FWD
Top view
LH
Exit sheet strap
3510-752-1005-00
Remove 2 x cable tie if present
Remove 2 x cable tie
Seat bottom pan
(pre-modification):
Remove completely
with attachment clips
Front seat beam
Rear seat beam
Attachment clips (4 x):
Remove with seat bottom pan

### Page 22

RECARO Aircraft Seating GmbH & Co. KG • Daimlerstrasse 21 • 74523 Schwäbisch Hall • Germany • CAGE: C1084 
SERVICE BULLETIN 
ORIGINALLY ISSUED:  May 20/2016 SB NO.: 3510-25-752 
REVISION NO.:           Page 22 of 22 
    
FV 7.3-04 Ind.01en  
 
Figure 4 Installation of new seat bottom pan 
NOTE: Numbers in parentheses are item numbers of Mod-Kit P/N 3510MK752-02. Refer to Table 6 on page 12.  
3510-752-1006-00
FWD
4 x 
 (60)
25 mm adhesive tape,
19 mm wide
Seat bottom assy (10):
Align to center between 
seat dividers (+/- 3 mm)
2 x 120 m
 (30):
To cover clamps (50) 
around front beam
m Loop tape 
50 light gray
2 x 55 mm Loop tape, 50 mm wide (40):
Position on top of rear clamps (50)
2 x 60 m
 (30): To cover clamps 
(50) at rear of rear seat beam
m Loop tape 50 mm 
light gray
4 x Clamp (50):
Align locks at angles as shown 
in side view below. Torque with 
4 Nm +/-1 Nm (36 +/-8 lb-in).
4 x Spacer sleeve (20):
Align as illustrated
Front seat beam
Rear seat beam
Assembly Sequence
Attach 4 x Spacer sleeve (20) 
to seat bottom assy (10)
 (60), then place 
Seat bottom assy (10) on seat 
beams, centered between the 
seat dividers (+/- 3 mm) and 
fasten with 4 x clamp (50).
, using
adhesive tape
Alternative attachment positions: 
Choose adjacent inner position 
if standard (outer) position is 
obstructed on a seat beam.
UP
RH view
FWD
Clamps (50):
Position locks at 45°
as shown if possible.
Different angles may be
chosen if necessary.
45°
45°
Front seat beamSpacer sleeves (20)
Rear seat beam
Seat bottom
assy (10)

### Page 23

RECARO Aircraft Seating GmbH & Co. KG • Daimlerstrasse 21 • 74523 Schwäbisch Hall • Germany • CAGE: C1084 
SERVICE BULLETIN 3510-25-752 
ACCOMPLISHMENT REPORT 
ORIGINALLY ISSUED:  May 20/2016 SB NO.: 3510-25-752 
REVISION NO.:  –      ACCOMPLISHMENT REPORT 
    
FV 7.3-04 Ind.01en  
A/C Type*: ________ Seat Type: 3510 Seat Series: ____ Date: _________ 
A/C Sign*: ________ Customer: ______________________ ICAO Code: ____ 
Accomplished by:  Customer  RECARO  Other: ____________________ 
NOTE: Scan completed forms to PDF and email to Service-Report@recaro-as.com within 10 days after accomplishment. 
Layout 
Pos. Seat P/N pre Mod Seat S/N Seat P/N post Mod Note 
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
Location: _________________________________________ Date: _______________________ 
Name, Signature: ___________________________________ Stamp: _____________________ 
* For seats presently not assigned to an aircraft, enter “Spare” or “t.b.d.” instead of the A/C Sign, and skip “Layout Pos.”.

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
