# Robinson Service Bulletin R66 13: No revision named

- Rights: © Robinson. Filed by the FAA in regulations.gov docket FAA-2016-0733; AD 2016-26-04 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Robinson Service Bulletin R66 13](https://openairdocs.org/service-documents/robinson/r66-13.md)
- Title as filed: Robinson R66 SB13 Service Bulletin
- Pages: 6
- PDF: https://openairdocs.org/files/sha256/27/45/2745ade0974bb2b49baf6ea24c639a18997b4a750e43be18419921bf16c5b21a
- Page: https://openairdocs.org/service-documents/robinson/r66-13/file/2745ade0974b

## Text

This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

(No text on this page.)

### Page 2

(No text on this page.)

### Page 3 (OCR)

R66 SB-13
Page 3 of 6
F016-2 Main Rotor Blade
Using a fine-point marker,
mark trailing edge with a
4.0 - 4.2 inch line.
1.25
inches
• INBOARD
Area to be removed
TRAILING EDGE
OUTBOARD •
Using 10x magnification,
RS 117.0  visually inspect upper and
lower surfaces and trailing
edge in this area. Verify no  RS 124.0
cracks, corrosion, or dam-
age such as nicks which
may initiate a crack.
(VIEW LOOKING DOWN)
FIGURE 1
MS3367-6-0
Ty-Rap
Area to be removed
R7769-6 Slit tube
(VIEW LOOKING DOWN)
FIGURE 2
(OVER)

### Page 4 (OCR)

R66 SB-13
Page 4 of 6
Minimum 0.5 inch -
bare metal  Correct inside radius (2 inches or greater)
INBOARD
0.25 inch minimum outside radius
TRAILING EDGE
OUTBOARD
4.0 - 5.0 inch  Incorrect radius (smaller than 2.0 inches)
diameter tube
Gap
(VIEW LOOKING DOWN)
FIGURE 3
(MAGNIFIED VIEW OF TRAILING EDGE)
FIGURE 4

### Page 5

(No text on this page.)

### Page 6

(No text on this page.)

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.