# Robinson Service Letter R44 37: No revision named

- Rights: © Robinson. Filed by the FAA in regulations.gov docket FAA-2013-0159; AD 2014-23-16 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Robinson Service Letter R44 37](https://openairdocs.org/service-documents/robinson/sl-r44-37.md)
- Title as filed: U.S. DOT/FAA - Robinson R44 Service Letter SL-37
- Pages: 2
- PDF: https://openairdocs.org/files/sha256/12/40/12401f06baed81174e2758e6a55f24d1a70aebf2474296df1d1a05487c2098be
- Page: https://openairdocs.org/service-documents/robinson/sl-r44-37/file/12401f06baed

## Text

This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

BINSON
HELICOPTER COMPANY
2901 Airport Drive, Torrance, California 90505  Phone (310) 539-0508 Fax (310) 539-5198
Page 1 of 2
R44 SERVICE LETTER SL-37
DATE: 18 June 2010
TO: R44 & R44 II owners, operators, and maintenance personnel
SUBJECT: C016-7 Main Rotor Blades
BACKGROUND: RHC has developed a new main rotor blade, p/n C016-7, which
incorporates an aluminum skin for better dent protection and corrosion resistance at
the blade tip. The C016-7 blade is part of the C005-12 blade & spindle assembly, and
a matched pair may be installed on any fuel-injected R44 II. Installing matched C016-7
blades on carbureted R44 helicopters, however, requires verifying certain components
are installed or retrofitted.
COMPLIANCE PROCEDURE:
Refer to R44 Illustrated Parts Catalog Figure 7-15B dated JUL 2008. Prior to installing
p/n C016-7 main rotor blades on a carbureted R44, verify the helicopter has:
1. hydraulic flight controls. R44s with manual flight controls (electric-trim) must be
upgraded to hydraulic controls; for details refer to:
www.robinsonheli.com/pdf_  i_files/r44_factory_overhaul_pricelist.pdf
2. C792-4 dual tachometer (101-102% engine rpm green arc, p/n R9602 for
overhauled-exchange unit).
3. C006-5 or -6 main rotor gearbox (R9594 overhauled-exchange), or C006-3 or -4
main rotor gearbox with B900-5 modification (if modified, a separate B900-5 data
plate will be adjacent to the C006 data plate).
4. lower C204-2 arm (steel, 2.52 inches long), connecting gearbox mast to lower fork
assy with NAS1305-31 or NAS6605-31 bolts.
5. lower A205-7 fork assy (3.70 inches center-to-center), attached to non-rotating
swashplate.
6. C017-6 swashplate, or C017-4 swashplate (R9596 overhauled-exchange).
7. upper A205-7 fork assy (3.85 inches center-to-center), attached to rotating
swashplate.
(OVER)

### Page 2 (OCR)

R44 SL-37
Page 2 of 2
8. upper C204-3 arm (steel, 2.87 inches long), connecting upper fork assy to main-
rotor-shaft yoke assemblies with NAS1305-31 or NAS6605-31 bolts.
9. two C203-5 yoke assemblies, on C251-2 main rotor shaft.
10.two C157-3 pitch horns, 16-hole flange (included with C005-12 blade & spindle
assemblies).
Approximate Cost:
Refer to www.robinsonheli.com/public for current parts prices.

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
