# Safran Service Bulletin 470-32-840

Copy: No revision named ("VSB_470-32-840_R00"), 9 pages: PDF https://openairdocs.org/files/sha256/b7/75/b775075c72c65471c276c5f68b917b2a33352e8637b434c28c28708db758fa96; text https://openairdocs.org/service-documents/safran/sb-470-32-840/file/b775075c72c6.md. Rights: © Safran. Filed by the FAA in regulations.gov docket FAA-2020-1113; AD 2021-11-18 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Safran](https://openairdocs.org/service-documents/safran.md)
- Type: Service bulletin (Service Bulletin)
- Number: 470-32-840
- Page: https://openairdocs.org/service-documents/safran/sb-470-32-840

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2021-11-18](https://openairdocs.org/ad/2021-11-18.md), effective Jul 16, 2021: No revision named

## Text (9 pages)

Rights: © Safran. Filed by the FAA in regulations.gov docket FAA-2020-1113; AD 2021-11-18 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

SAFRAN LANDING SYSTEMS SAS
CAGE: F0189
Inovel Parc Sud - 7, rue Général Valérie André
78140 VELIZY-VILLACOUBLAY – FRANCE
Telephone: +33 (0) 1 46 29 81 00
www.safran-landing-systems.com
SERVICE BULLETIN
LANDING GEAR - MAIN LANDING GEAR
INSPECTION O F BARREL / HINGE ARM PIN
1. P LANNING INFORMATION
A. Effectivity
(1) Component sa f f e c t e d
(a) Hinge A rm Pin P/N:
C66441
C66441-2
C66441-20
B. Concurrent Requirements
Accomplishment of this Service Bulletin requires prior or simultaneous accomplishment of Service
Bulletin 470-32-841.
C. Reason
(1) Local out of roundness of the hinge arm pins (P/Ns mentioned in the para Effectivity) have been
reported during visual inspection in service.
(2) This Service Bulletin provides an inspection procedure to detect local out of roundness of the hinge
arm pins of the Main Landing Gear Barrel (P/Ns mentioned in the para Effectivity).
D. Desc ription
(1) The accomplishment of this Inspection Service Bulletin consists in carrying out an inspection in
workshop to detect local out of roundness of the pins.
(2) Safran Landing Systems informs the operators to complete the reporting sheet mentioned in
Appendix 3 of this Service Bulletin. The reporting form with the results of the inspection must be
sent to the address mentioned in paragraph 3.F.
The technical data in this document (or ﬁle) may contain US data and be controlled for export under the Export Administration Regulations (EAR),
15 CFR Parts 730-774, ECCN: 9E991. Violations of these laws may be subject to ﬁnes and penalties under the Export Administration Act.
©S AFRAN LANDING SYSTEMS (AND SUBSEQUENT REVISION PAGE DATES) This document and all information contained herein is the
sole property of Safran Landing Systems. No intellectual property rights are granted by the deliv ery of this document or the disclosure of its
content. This document shall not be reproduced to a third party w ithout the express written consent of Safran Landing Systems.
Modiﬁcation No. NA Service Bulletin No. 470-32-840
Initial Issue: Dec 03/19 P a g e1o f 9
Revision No. 00 Dec 03/19

### Page 2

SAFRAN LANDING SYSTEMS SAS
CAGE: F0189
SERVICE BULLETIN
E. Compliance
(1) Classi ﬁcation
Mandatory.
(2) Accomplishment Timescale:
S e r v i c eB u l l e t i nt ob ea c c o m p l i s h e dw i t h i n3 0d a y sf r o mV S B4 7 0 - 3 2 - 8 4 1e m b o d i m e n t .
Inspection results report sending to Safran Landing Systems to be performed:
Case 1 - Within 15 days from pin inspection if no ﬁndings,
Case 2 - Within 24 hours in case of ﬁnding on the measurements.
Safran Landing Systems will provide  load assessment based on inspection  results within 5 
business
 days from the receipt  of inspection results report.
This Service Bulletin has been classi ﬁed Mandatory. It is expected that an Airworthiness Directive
(AD) published by the European Aviation Safety Agency (EASA) will be issued to con ﬁrm this
classiﬁcation. It is anticipated that the AD will conﬁ rm the timescales given above but reference
should be made to the AD for con ﬁrmation of the mandated accomplishment timescale.
F. Approva l
The inspection procedures described in this SB are reviewed and technically accepted by Airbus
to applyt ot h eA i r b u sﬂeet affected.
This SB does not contain any change information that revises the equipment de ﬁnition covered by
Airbus approved modi ﬁcations.
G. Manpower
Estimated time required for the accomplishment of this Service Bulletin in workshop:
(1) Required manpower: 1
(2) Man- hours: 4 hours
(3) Elapsed time: 4 hours
NOTE: It is assumed that the equipment has been placed in a maintenance status. The man-hours
estimated do not include time to prepare and administrative functions.
H. Weight and Balance
None.
I. El ectrical Load Data
Not changed.
Service Bulletin No. 470-32-840
P a g e2o f 9
Dec 03/19

### Page 3

SAFRAN LANDING SYSTEMS SAS
CAGE: F0189
SERVICE BULLETIN
J. Software Acco mplishment Summary
Not applicable.
K. References
– Safran Landing System Component Maintenance Manual 32-12-14, Barrel.
– Safran Landing System Component Maintenance Manual 32-14-12, Barrel.
– Safran Landing System Component Maintenance Manual 32-14-15, Barrel.
– Safran Landing System Component Maintenance Manual 32-14-39, Barrel.
– Safran Landing System Component Maintenance Manual 32-14-43, Barrel.
– Safran Landing System Component Maintenance Manual 32-14-47, Barrel.
– Safran Landing System Component Maintenance Manual 32-14-50, Barrel.
– Safran Landing System Component Maintenance Manual 32-14-52, Barrel.
– Safran Landing System Component Maintenance Manual 32-14-54, Barrel.
– Safran Landing System Component Maintenance Manual 32-14-59, Barrel.
– Safran Landing System Component Maintenance Manual 32-14-85, Barrel.
L. Publications Affected
Not applicable.
M. Interc hangeability
Not applicable.
Service Bulletin No. 470-32-840
P a g e3o f 9
Dec 03/19

### Page 4

SAFRAN LANDING SYSTEMS SAS
CAGE: F0189
SERVICE BULLETIN
2. M ATERIAL INFORMATION
A. Material - Price and Availability
Not applicable.
B. Industry Support Information
Not applicable.
C. List of com ponents
Not applicable.
D. Subcomponents to be re-identi ﬁed
Not applicable.
E. Tooling
None.
F. Special Tools
None.
Service Bulletin No. 470-32-840
P a g e4o f 9
Dec 03/19

### Page 5

SAFRAN LANDING SYSTEMS SAS
CAGE: F0189
SERVICE BULLETIN
3. A CCOMPLISHMENT INSTRUCTIONS
A. General
(1) The work described in this VSB deals with the inspection of the removed pin.
B. Preparatio n
Not applicable
C. Procedure
(1) Perform local out of roundness checks of the hinge arm pin according to Appendix 1 within the
timescale deﬁned in paragraph 1.E.(2).
(2) Dependin g on the results from the previous checks, two cases are possible:
(a) CASE 1: No ﬁnding
1 The reporting forms in Appendix 1 and Appendix 3 have to be completed and sent to
Safran Landing Systems within the timescale deﬁned in paragraph 1.E.(2).
2 The inspected hinge arm pin must be scrapped without further actions.
(b) CASE 2: Finding on measurement
1 Step 1
a The reporting forms in Appendix 1 and Appendix 3 have to be completed and sent to
Safran Landing Systems  within the timescale deﬁned in paragraph 1.E.(2).
b Safran Landing Systems will provide load assessment  based on reported  forms within the
timescale deﬁned in paragraph 1.E.(2).
– Either the concerned MLG requires no further action and the inspected hinge arm
pin must be scrapped.
–Or the concerned MLG may  have suffered an overload that requires to be
removed and sent to MRO shop for a Hard Landing inspection (refer to paragraph
3.C.(2).(b).2).
2 Step 2
a Safran Landing Systems will provide you with a dedicated inspection plan (including
inspections of the hinge arm pins requested in Appendix 1) to be performed on the MLG.
Service Bulletin No. 470-32-840
P a g e5o f 9
Dec 03/19

### Page 6

SAFRAN LANDING SYSTEMS SAS
CAGE: F0189
SERVICE BULLETIN
b Safran Landing Systems will then provide a de ﬁnitive technical statement on the MLG,
once complete inspection reports are received.
c The inspected hinge arm pin must then be scrapped.
D. Re-identi ﬁcation of equipment
(1) After the wo rk is performed, write the Service Bulletin number 470-32-840 in the applicable
landing gear records.
E. Test
Not applicable.
F. Close-up
(1) Send the d uly ﬁlled reporting form to Safran Landing Systems Product Support Engineering team
and to your regional Customer Support Center (CSC).
(a) Safran Landing Systems Product Support Engineering team: pselgi.vel.sls@safrangroup.com
(b) Regional CSC:
Europe, Africa and Middle East : eamecsc.sls@safrangroup.com
N o r t h&S o u t hA m e r i c a : americascsc.sls@safrangroup.com
Asia : asiacsc.sls@safrangroup.com
(2) All scrapped hinge arm pins further to the VSB 470-32-840 inspection results analysis must be
justiﬁed to Safran Landing Systems by sending duly ﬁlled scrap certiﬁcate to relevant regional CSC.
Service Bulletin No. 470-32-840
P a g e6o f 9
Dec 03/19

### Page 7

SAFRAN LANDING SYSTEMS SAS
CAGE: F0189
SERVICE BULLETIN
SB-470-32-840-01-00
  LOCAL OUT OF ROUNDNESS CHECK OF BARREL / HINGE ARM PIN AT
SECTION 1,2 & 3 ON CHROMIUM PLATING
0° 22° 45° 67° 90° 112° 135° 157°
CRITERIA TO BE MET:
NOTE: SCHEME ABOVE IS NOT A SCALE DRAWING.
DIA MEASUREMENT
SECTION 1
(161,00 mm
(6.3386 in))
APPENDIX 1: HINGE ARM PIN MEASUREMENTS
12 3
161,00 mm
(6.3386 in)
191,00 mm
(7.5197 in)
221,00 mm
(8.7008 in)
MAX OUT OF ROUNDNESS MEASURED
PER SECTION (MAX DIA - MIN DIA):
DIA MEASUREMENT
SECTION 2
(191,00 mm
(7.5197 in))
DIA MEASUREMENT
SECTION 3
(221,00 mm
(8.7008 in))
MAXIMUM  LOCAL OUT OF ROUNDNESS MEASURED <0,060mm (0.0024 in)
Service Bulletin No. 470-32-840
P a g e7o f 9
Dec 03/19

### Page 8

SAFRAN LANDING SYSTEMS SAS
CAGE: F0189
SERVICE BULLETIN
REPORTING FORMS IN
APPENDIX 1 AND APPENDIX 3 
TO BE COMPLETED AND SENT 
TO SAFRAN LANDING SYSTEMS
WITHIN TIMESCALE DEFINED
IN PARAGRAPH 1.E.(2). 
REPORTING FORMS IN
APPENDIX 1 AND APPENDIX 3 
TO BE COMPLETED AND SENT 
TO SAFRAN LANDING SYSTEMS
WITHIN TIMESCALE DEFINED
IN PARAGRAPH 1.E.(2). 
SB-470-32-840-02-00
HINGE ARM PIN 
RECEPTION IN SHOP
APPENDIX 2: HINGE ARM PIN INSPECTION FLOWCHART
SAFRAN LANDING SYSTEMS 
TO PROVIDE A DEDICATED
 INSPECTION PLAN TO BE
 PERFORMED ON THE MLG.
SAFRAN LANDING SYSTEMS
TO PROVIDE A DEFINITIVE 
TECHNICAL STATEMENT 
ON THE MLG, ONCE 
COMPLETE INSPECTION 
REPORTS RECEIVED.
HINGE ARM PIN 
TO BE SCRAPPED.
MLG TO BE REMOVED AND 
SENT TO MRO SHOP FOR
 HARD LANDING INSPECTION.
NO FURTHER ACTION.
HINGE ARM PIN TO 
BE SCRAPPED.
WHATEVER THE INSPECTION
 RESULTS ARE, THE VSB PROFORMA
MUST BE FILLED AND SENT TO 
SAFRAN LANDING SYSTEMS AT:
pselgi.vel.sls@safrangroup.com
CASE 2:
FINDINGS ON
MEASUREMENT 
PERFORM LOCAL OUT OF ROUNDNESS CHECK
WITHIN TIMESCALE DEFINED IN PARAGRAPH 1.E.(2)
CASE 1:
NO FINDINGS
SAFRAN LANDING SYSTEMS 
LOAD ASSESSMENT ON REPORTED 
FORMS  WITHIN TIMESCALE 
DEFINED IN PARAGRAPH 
1.E.(2)
Service Bulletin No. 470-32-840
P a g e8o f 9
Dec 03/19

### Page 9

SAFRAN LANDING SYSTEMS SAS
CAGE: F0189
SERVICE BULLETIN
APPENDIX 3
REPORTING FORM TO BE COMPLETED IN SHOP
LANDING GEAR - MAIN LANDING GEAR
INSPECTION OF BARREL / HINGE ARM PIN
NOTE: Complete the proforma below to identify clearly each hinge arm pin of each MLG:
Operator: MSN:
Aircraft CSN: Aircraft TSN:
Aircraft CSO: Aircraft TSO:
Hinge Arm Pin LH
P/N: S/N:
CSN: TSN: CSO: TSO:
H i n g eA r mP i nR H
P/N: S/N:
CSN: TSN: CSO: TSO:
MLG Leg LH
P/N: S/N:
CSN: TSN: CSO: TSO:
MLG Leg RH
P/N: S/N:
CSN: TSN: CSO: TSO:
Date of inspection:
NOTE: All scrapped hinge arm pins further to the VSB 470-32-840 inspection results analysis must
be justiﬁed to Safran Landing Systems by sending duly ﬁlled scrap certi ﬁcate to relevant
regional CSC.
Service Bulletin No. 470-32-840
P a g e9o f 9
Dec 03/19

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
