# Sikorsky Alert Service Bulletin 70-04-17

## Copies (2)

Copies the FAA filed in AD dockets on regulations.gov, newest revision first. A newer revision may exist.

- No revision named ("ASB_70-04-17 (reduced sz PDF)"), 18 pages: PDF https://openairdocs.org/files/sha256/cc/0b/cc0be35c46d8a84b4a5db47dc3ad5bd9083f004cb99cff938e82349741c8b900; text https://openairdocs.org/service-documents/sikorsky/sb-70-04-17/file/cc0be35c46d8.md. Rights: © Sikorsky. Filed by the FAA in regulations.gov docket FAA-2024-0774, the docket of AD 2024-06-51. Not covered by OpenAirDocs’ CC0 dedication.
- No revision named ("Sikorsky S-70_H-60 Helicopter Alert Service Bulletin 70-04-17 (contains GE T700 SB 72-A0088)  (reduced size PDF)"), 18 pages: PDF https://openairdocs.org/files/sha256/0f/a5/0fa53f4369fbd7d02abee8ea117f3a3dfe848471fec1d2ab817d3822e4a5b2b6; text https://openairdocs.org/service-documents/sikorsky/sb-70-04-17/file/0fa53f4369fb.md. Rights: © Sikorsky. Filed by the FAA in regulations.gov docket FAA-2024-0774, the docket of AD 2024-06-51. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Sikorsky](https://openairdocs.org/service-documents/sikorsky.md)
- Type: Service bulletin (Alert Service Bulletin)
- Number: 70-04-17
- Page: https://openairdocs.org/service-documents/sikorsky/sb-70-04-17

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2024-06-51](https://openairdocs.org/ad/2024-06-51.md), effective Apr 23, 2024: No revision named

## Text (18 pages)

No revision named, the newest copy. Rights: © Sikorsky. Filed by the FAA in regulations.gov docket FAA-2024-0774, the docket of AD 2024-06-51. Not covered by OpenAirDocs’ CC0 dedication. This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

Sikorsky Aircraft Corporation
6900 Main Street P.O. Box 9729
SIKORSKY  (203) 386-4000  Stratford, Connecticut 06615-9129
A LOCKHEED MARTIN COMPANY
S-70™/H-60 HELICOPTER
ALERT
SERVICE BULLETIN
NOTICE TO ALL PERSONS RECEIVING THIS DOCUMENT:
WARNING: THIS DOCUMENT, OR AN EMBODIMENT OF IT IN ANY MEDIA, DISCLOSES INFORMATION WHICH IS PROPRIETARY, IS THE PROPERTY OF LOCKHEED MARTIN CORPORATION AND/OR ITS SUBSIDIARIES, IS
AN UNPUBLISHED WORK PROTECTED UNDER APPLICABLE COPYRIGHT LAWS, AND IS DELIVERED ON THE EXPRESS CONDITION THAT IT IS NOT TO BE USED, DISCLOSED, REPRODUCED, IN WHOLE OR IN PART
(INCLUDING REPRODUCTION AS A DERIVATIVE WORK), OR USED FOR MANUFACTURE FOR ANYONE OTHER THAN LOCKHEED MARTIN CORPORATION AND/OR ITS SUBSIDIARIES WITHOUT ITS WRITTEN CONSENT,
AND THAT NO RIGHT IS GRANTED TO DISCLOSE OR SO USE ANY INFORMATION CONTAINED HEREIN. ALL RIGHTS RESERVED. ANY ACT IN VIOLATION OF APPLICABLE LAW MAY RESULT IN CIVIL AND CRIMINAL
S-70T IS A REGISTERED TRADEMARK OF SIKORSKY AIRCRAFT CORPORATION.
ASB 70-04-17
Basic Issue • February 28/24
SUBJECT:  POWERPLANT SYSTEMS - Engine Systems - One-Time Inspection of Power Turbine
Shaft/Torque Reference Tube Magnetic Insert Braze.
Section 1. PLANNING INFORMATION
A.  Effectivity  All new, overhauled or repaired T700 Turboshaft Engine power turbine assemblies
identified in General Electric (GE) Alert Service Bulletin (ASB) T700 S/B 72-A0088,
Dated February 28, 2024, shipped between January 1, 2020, and October 31,
2023 with less than 100 operating hours Time Since New (TSN) or less than 100
operating hours Time Since Overhaul (TSO) / Time Since Repair (TSR).
B. Purpose  To ensure the awareness of and compliance with the inspection outlined in
General Electric (GE) Alert Service Bulletin (ASB) T700 S/B 72-A0088, Dated
February 28, 2024.
C. Background  GE has notified Sikorsky of multiple failures of the braze joint on the torque
reference shaft. GE identified that the failure is due to poor braze coverage on the
AFT insert used to measure Torque (Q) and Power Turbine (Np) speed. GE has
notified Sikorsky that several of the failures have occurred in the test cells, and one
occurred in a fielded engine. Failure of the torque reference shaft AFT insert
results in inaccurate and/or erratic Q and Np governing and display. As a result of
Sikorsky released All Operators Letter CCS-70-AOL-24-0001 on
January 22, 2024 further detailing the quality escape.
D.  Description Review and comply with GE ASB T700 S/B 72-A0088, Dated February 28, 2024.
ONE-TIME
INSPECTION  Page 1 of 4
WARNING - This document contains export-controlled information subject to the ITAR. USML XIX(g)

### Page 2 (OCR)

S-70/H-60 ALERT  ASB 70-04-17
SERVICE BULLETIN  Basic Issue • February 28/24
Section 1. PLANNING INFORMATION (CONTINUED)
E. Compliance  Compliance is essential. The inspection outlined herein shall be performed prior to
next flight and no later than March 29, 2024. For deployed aircraft, non-passenger
ferry flights are permitted to move the aircraft to a maintenance facility. Spare
engines shall be inspected prior to installation and no later than March 29, 2024.
F.  Approval  Inspection item.
G.  Manpower (Estimated)
Not Applicable.
H. Tooling
None.
Weight and Balance
Not affected.
J. Electrical Load Data
Not affected.
K. Software Load Data
Not changed.
L. References
(1) Applicable S-70/H-60 model helicopter maintenance manual.
(2) GE ASB T700 S/B 72-A0088.
M. Publications Affected
None.
N. Attachment
(1) GE ASB T700 S/B 72-A0088.
ONE-TIME
Page 2  INSPECTION
This document contains export-controlled information. See WARNING on first page.

### Page 3 (OCR)

ASB 70-04-17  S-70/H-60 ALERT
Basic Issue • February 28/24  SERVICE BULLETIN
Section 2. MATERIAL INFORMATION
A. Basis for Material Data
Per helicopter.
B. Bill of Material
None.
C. Consumable Material
None.
Section 3. ACCOMPLISHMENT INSTRUCTIONS
A. Prepare helicopter for modification:
TO PREVENT ELECTRICAL SHOCK OF PERSONNEL OR
WARNING  POSSIBLE DAMAGE TO HELICOPTER COMPONENTS, MAKE
SURE TO TURN OFF ALL ELECTRICAL POWER.
(1) Turn off all helicopter electrical and hydraulic power.
(2) Engage rotor brake or gust lock.
B. Remove engine in accordance with applicable S-70/H-60 model helicopter maintenance manual.
Perform inspection in accordance with GE ASB T700 S/B 72-A0088. For questions about
scheduling your inspection, please contact your GE FSR or contact Sikorsky Customer Service
Engineer at 1-800-Winged-S (1-800-946-4337) or by email at wcs_govt field serv eng.gr-
sik@lmco.com for assistance in scheduling your inspection.
D.  Install engine in accordance with applicable S-70/H-60 model helicopter maintenance manual.
MAKE SURE ALL FOREIGN OBJECT DEBRIS (FOD) IS REMOVED
CAUTION  BEFORE RETURNING HELICOPTER TO SERVICE.
E.  Inspect and clean as required to remove any FOD from aircraft and surrounding areas.
F. Return helicopter to service.
ONE-TIME
INSPECTION  Page 3
This document contains export-controlled information. See WARNING on first page.

### Page 4 (OCR)

S-70/H-60 ALERT  ASB 70-04-17
SERVICE BULLETIN  Basic Issue • February 28/24
Section 3. ACCOMPLISHMENT INSTRUCTIONS (CONTINUED)
G. Record of compliance:
(1) Make helicopter logbook entries to show compliance with this ASB as follows:
(a) Make helicopter level logbook entry on form SA7343-15 (Aircraft ASB and CSN
Release Signoff).
(b) When ASB modifies a component that can be removed from this helicopter:
1. Make component log card entries on forms SA7343-22 (Aircraft Component
Log Cards) & SA7343-21 (Component Log Cards), as applicable.
2.  If a component modified by this ASB does not have a log card and the ASB
does not create one, then annotate compliance on the next higher assembly
that the component belongs to which does have a log card.
NOTE: If access to www.Sikorsky360.com is unavailable, complete attached ALERT
SERVICE BULLETIN COMPLIANCE RECORD CARD and return it to Sikorsky
Aircraft Corporation.
(2) Make an appropriate electronic compliance entry in the E-Notification section at
www.Sikorsky360.com. Refer to User Guide located on the www.Sikorsky360.com/E-
Notification Search page.
ONE-TIME
Page 4  INSPECTION
This document contains export-controlled information. See WARNING on first page.

### Page 5 (OCR)

(Fold over and tape closed)
SIKORSKY AIRCRAFT CORPORATION
FACSIMILE NUMBER (817) 762-6715
EMAIL ADDRESS: product_safety.gr-sik@Imco.com
ATTENTION: Gr-SIK, Product_Safety
SIKORSKY AIRCRAFT CORPORATION
IMPORTANT NOTICE
Upon COMPLIANCE with the attached ASB, Sikorsky requests your cooperation
in completing and returning this ENTIRE PAGE by MAIL, FAX, or scan &
EMAIL.
Please fill in the requested information at the bottom of the page, so we may maintain
proper records documenting the configuration of your aircraft. This information is useful
when determining configuration and effectivity of issues affecting fielded aircraft.
This request is in keeping with our policy to assure that our customers receive the latest
information applicable for the maintenance of your aircraft. Thank you.
ALERT SERVICE BULLETIN:  70-04-17  Compliance Record Card
TITLE: _POWERPLANT SYSTEMS - Engine Systems - One-Time Inspection of Power
Turbine Shaft/Torque Reference Tube Magnetic Insert Braze.
OWNER/OPERATOR:
SUBMITTED BY:  DATE:
FOLLOWING SERIAL NUMBERS ARE NOT AFFECTED BY THIS ASB
ASB HAS BEEN COMPLIED WITH ON HELICOPTER SERIAL NUMBERS:
-(Fold Up to Arrows)
This document contains export-controlled information. See WARNING on first page.

### Page 6 (OCR)

SIKORSKY
A LOCKHEED MARTIN COMPANY  No Postage
Necessary
BUSINESS REPLY MAIL
FIRST-CLASS MAIL  PERMIT NO. 432  BRIDGEPORT CT
POSTAGE WILL BE PAID BY ADDRESSEE
SIKORSKY AIRCRAFT CORPORATION
Commercial Systems and Services
Mailstop K100
124 QUARRY ROAD
TRUMBULL, CT 06611 U.S.A.
ATTENTION:
Gr-SIK, Product_Safety
Please complete the form on the reverse side and FAX to
FACSIMILE NUMBER (817) 762-6715
Or scan and email to:
EMAIL ADDRESS: product_safety.gr-sik@Imco.com
or fold and return ENTIRE form to Sikorsky Aircraft Corporation
This document contains export-controlled information. See WARNING on first page.

### Page 7 (OCR)

GE
T700 TURBOSHAFT ENGINE  Aviation
ALERT SERVICE BULLETIN
ENGINE - Power Turbine Module - Power Turbine Shaft/Torque Reference Tube Magnetic
Insert Braze Inspection
GE PROPRIETARY INFORMATION
The information contained in this document is GE proprietary information and is disclosed in confidence.
It is the property of GE and shall not be used, disclosed to others or reproduced without the express
written consent of GE, including, but without limitation, it is not to be used in the creation, manufacture,
development, or derivation of any repairs, modifications, spare parts, designs, or configuration changes or
to obtain FAA or any other government or regulatory approval to do so. If consent is given for
reproduction in whole or in part, this notice and the notice set forth on each page of this document shall
appear in any such reproduction in whole or in part.
This technical data is considered ITAR controlled pursuant to 22 CFR Parts 120-130. Transfer of this data
by any means to a Non-US Person, whether in the United States or abroad, without the proper U.S.
Government authorization (e.g., License, exemption, NLR, etc.), is strictly prohibited.
Copyright (2024) General Electric Company, U.S.A.
DESTRUCTION NOTICE - Destroy by any method that will prevent disclosure of the contents
or reconstruction of the document.
February 28, 2024  T700 S/B 72-A0088
PAGE 1 of 12
This document contains export-controlled information. See WARNING on first page.

### Page 8 (OCR)

GE
T700 TURBOSHAFT ENGINE  Aviation
ALERT SERVICE BULLETIN
ENGINE - Power Turbine Module - Power Turbine Shaft/Torque Reference Tube Magnetic
Insert Braze Inspection
1. PLANNING INFORMATION
A. Effectivity
This Alert Service Bulletin is applicable to all T700 engines operating in commercial H60/S70
aircraft with power turbine (PT) drive shaft part number (P/N) 5125T92G01 installed with less
than 100 total engine operating hours or 100 engine operating hours since replacement (TSR)
of the PT drive shaft assembly produced or made between 2020 through October 2023.
Appendix A, Table 1 identifies engine serial numbers, known to GE, that were shipped from GE
between 2020 - October 2023.
Appendix A, Table 2 identifies spare PT drive shaft assemblies, known to GE, that were
shipped from GE between 2020 - October 2023.
There may be additional PT drive shaft assembly serial numbers that have less than 100
engine operating hours since repair installed into T700 engines that GE is not aware of and
would require compliance with this Alert Service Bulletin. Operators should screen their engine
logbooks to identity this population.
B. Description
This Alert Service Bulletin provides instructions to remove the engine C-sump cover and use an
Ultrasonic Test (UT) Phase Array probe to inspect the PT drive shaft assembly reference tube
magnetic insert end braze joint.
C. Compliance
Category 1
GE recommends that you do this Alert Service Bulletin before subsequent flight.
Non-passenger operation is allowed for repositioning the aircraft to a maintenance facility if
required.
Impact A
This recommendation is to address a condition that may affect flight safety.
NOTE: This Alert Service Bulletin may be accomplished at the operator facility or in the
overhaul shops.
February 28, 2024  T700 S/B 72-A0088
PAGE 2 of 12
GE PROPRIETARY INFORMATION - Subject to the restrictions on the cover or first page.
This document contains export-controlled information. See WARNING on first page.

### Page 9 (OCR)

GE
T700 TURBOSHAFT ENGINE  Aviation
ALERT SERVICE BULLETIN
ENGINE - Power Turbine Module - Power Turbine Shaft/Torque Reference Tube Magnetic
Insert Braze Inspection
D. Concurrent Requirements
None.
E. Reason
(1)  Objective:
This Alert Service Bulletin provides an inspection to verify the minimum acceptable braze
coverage on the PT drive shaft assembly reference tube magnetic insert.
(2)  Condition:
Multiple PT drive shaft assemblies were shipped with inadequate braze coverage on the
end of the PT shaft reference tube magnetic insert joint.
(3)  Cause:
Inadequate braze coverage within the torque reference tube magnetic insert joint can
become compromised leading to improper torque and speed indications.
(4)  Improvement:
Planning has been updated and UT Phase Array probe inspection has been incorporated
into the manufacturing process of the torque reference tube assembly.
(5)  Substantiation:
Substantiation is provided by analysis and field experience.
F. Approval
Not applicable.
G. Manpower
You will need approximately one man-hour to do this Alert Service Bulletin once the area is
exposea.
H. Weight and Balance
Weight and balance are not changed.
February 28, 2024  T700 S/B 72-A0088
PAGE 3 of 12
GE PROPRIETARY INFORMATION - Subject to the restrictions on the cover or first page.
This document contains export-controlled information. See WARNING on first page.

### Page 10 (OCR)

GE
T700 TURBOSHAFT ENGINE  Aviation
ALERT SERVICE BULLETIN
ENGINE - Power Turbine Module - Power Turbine Shaft/Torque Reference Tube Magnetic
Insert Braze Inspection
References
FST-2572, Phase Array Ultrasonic Inspection Procedure
SEI-671, Aviation Unit and Intermediate Maintenance Manual for Engine, Aircraft Turboshaft
Models: T700-GE-700, T700-GE-701, T700-GE-701A, T700-GE-701A-1, T700-GE-701C,
T700-GE-701D
SEI-676, Depot Maintenance Manual for Engine, Aircraft, Turboshaft Models: T700-GE-700,
T700-GE-701, T700-GE-701A, T700-GE-701A-1, T700-GE-401, T700-GE-401C,
T700-GE-701C, T700-GE-701D
T700 Turboshaft Engine Service Record
J. Publications Affected
None.
K. Interchangeability
Not applicable.
L. Software Accomplishment Summary
Not applicable.
2. MATERIAL INFORMATION
A. Material - Requirements
(1)  Parts necessary to do this Alert Service Bulletin:
TRIO
Part Number  Eng  Part Name  Days
4074T58P04  (1)  Packing, Preformed  Quote  Quote
SEI-676,
Figure 3-9, Item 5
J1400P011  (Alt)  Packing, Preformed  Quote  (-)  Quote
SEI-676,
Figure 3-9, Item 5
4074T58P09  (1)  Packing, Preformed  Quote  (-)  Quote
SEI-676,
Figure 3-9, Item 6
J1400P159  (Alt)  Packing, Preformed  Quote  (-)  Quote
SEI-676,
Figure 3-9, Item 6
February 28, 2024  T700 S/B 72-A0088
PAGE 4 of 12
GE PROPRIETARY INFORMATION - Subject to the restrictions on the cover or first page.
This document contains export-controlled information. See WARNING on first page.

### Page 11 (OCR)

GE
T700 TURBOSHAFT ENGINE  Aviation
ALERT SERVICE BULLETIN
ENGINE - Power Turbine Module - Power Turbine Shaft/Torque Reference Tube Magnetic
Insert Braze Inspection
(2)  Other Spare Parts:
None.
(3)  Consumables:
Engine Lubricating Oil (SEI-671, WP 0499 00, Item 88 or Item 90).
B. Industry Support Information
Not applicable.
C. Configuration Chart
Not applicable.
D. Parts Disposition
See paragraph 3., ACCOMPLISHMENT INSTRUCTIONS.
E.  Tooling - Price and Availability
Part Number  Nomenclature
GE-FQAP-803  Ultrasonic Probe Test Kit
(Provided by GE Aerospace)
February 28, 2024  T700 S/B 72-A0088
PAGE 5 of 12
GE PROPRIETARY INFORMATION - Subject to the restrictions on the cover or first page.
This document contains export-controlled information. See WARNING on first page.

### Page 12 (OCR)

GE
T700 TURBOSHAFT ENGINE  Aviation
ALERT SERVICE BULLETIN
ENGINE - Power Turbine Module - Power Turbine Shaft/Torque Reference Tube Magnetic
Insert Braze Inspection
3. ACCOMPLISHMENT INSTRUCTIONS
A. General
NOTE: To accomplish this inspection there must be access to the engine C-sump heat shield
to allow removal of the heat shield and the C-sump cover to insert the Phase Array
Probe (approximately 12.5 inches). The inspection also requires electrical power for
an ultrasonic instrument (approximately 12 inches x 12 inches x 6 inches) which must
be visually observed by the inspector during the test and must be in close proximity to
the probe. This may require removal of the engine from the aircraft in some
installations. This inspection may also be carried out on an engine stand or in an
engine storage container with the lid removed.
NOTE:  Review the engine logbook for the installation time of the installed PT drive shaft
assembly P/N 5125T92G01. If the current operational time on the part since
installation is equal to or greater than 100 hours, compliance with this Alert Service
Bulletin is satisfied. Go to paragraph 3.B. (3) and record compliance with this Alert
Service Bulletin. If the PT drive shaft assembly is less than 100 hours, proceed with
the remainder of this Alert Service Bulletin.
NOTE:  This procedure gives instructions to remove the C-sump heat shield (2, Figure 1) and
C-sump cover (5) to inspect the magnetic insert braze joint on the PT drive shaft
assembly (16, Figure 2 and Figure 3).
Remove the C-sump heat shield (2, Figure 1) and C-sump cover (5). Refer to SEI-671,
WP 0383 00.
NOTE: The UT Phase Array Probe inspection must be performed by a level 2 or 3NDT
ultrasonic inspector who has been trained by GE Aerospace.
(2)  Following the GE proprietary inspection procedure FST-2572 - Phase Array Ultrasonic
Inspection Procedure for the torque reference tube, perform the braze inspection to
quantify the percentage of braze.
(a) If percentage of braze is greater than or equal to 42%, the engine may be returned
to service.
(b)  If percentage of braze is less than 42%, tag the engine as failed PT shaft UT
inspection and return the engine or PT module to a depot for repair or replacement
of the PT drive shaft assembly.
(3)  Once the inspection is completed, re-install the C-sump cover (5, Figure 1) and C-sump
heat shield (2). Refer to SEl-671, WP 0383 00.
(4)  For engines that have passed inspection, perform required checks. Refer to SEI-671,
WP 0106 00, Table 1 or WP 0225 00, Table 1.
February 28, 2024  T700 S/B 72-A0088
PAGE 6 of 12
GE PROPRIETARY INFORMATION - Subject to the restrictions on the cover or first page.
This document contains export-controlled information. See WARNING on first page.

### Page 13 (OCR)

GE
T700 TURBOSHAFT ENGINE  Aviation
ALERT SERVICE BULLETIN
ENGINE - Power Turbine Module - Power Turbine Shaft/Torque Reference Tube Magnetic
Insert Braze Inspection
B. Compliance
(1)  Record information in Table A.
(2)  Provide copies of Table A and the GE UT inspection report to the GE Field Service
Representative and the Customer Representative.
(3)  Record compliance of this Alert Service Bulletin in the appropriate T700 Turboshaft
Engine Service Record.
February 28, 2024  T700 S/B 72-A0088
PAGE 7 of 12
GE PROPRIETARY INFORMATION - Subject to the restrictions on the cover or first page.
This document contains export-controlled information. See WARNING on first page.

### Page 14 (OCR)

GE
T700 TURBOSHAFT ENGINE  Aviation
ALERT SERVICE BULLETIN
ENGINE - Power Turbine Module - Power Turbine Shaft/Torque Reference Tube Magnetic
Insert Braze Inspection
TABLE A - POWER TURBINE DRIVE SHAFT ASSEMBLY INSPECTION RESULTS
Engine or  PT Drive  PT Drive  PT Shaft  PT Shaft
PT Module  Shaft  Shaft  Time Since  Time Since
S/N (if  Assembly  Assembly  New  Repair  % Braze
applicable)  P/N  S/N  (Hours)  (Hours)  Coverage  Date
Work Performed by (Print Name):  Signature:  Date:
February 28, 2024  T700 S/B 72-A0088
PAGE 8 of 12
GE PROPRIETARY INFORMATION - Subject to the restrictions on the cover or first page.
This document contains export-controlled information. See WARNING on first page.

### Page 15 (OCR)

GE
T700 TURBOSHAFT ENGINE  Aviation
ALERT SERVICE BULLETIN
ENGINE - Power Turbine Module - Power Turbine Shaft/Torque Reference Tube Magnetic
Insert Braze Inspection
WALLS
LEGEND:
1. Locknut (Qty-8)
2. C-Sump Heat Shield
3. Bolt (Qty-3)  FLOOR
4. Jacking Screw Hole (Qty-3)
4A. Packing Groove
5. C-Sump Cover
6, Connector
7. Preformed Packing
8. Preformed Packing
9. Exhaust Frame
6045654-00
Figure 1. C-Sump Cover and C-Sump Heat Shield - Removal and Installation
February 28, 2024  T700 S/B 72-A0088
PAGE 9 of 12
GE PROPRIETARY INFORMATION - Subject to the restrictions on the cover or first page.
This document contains export-controlled information. See WARNING on first page.

### Page 16 (OCR)

GE
T700 TURBOSHAFT ENGINE  Aviation
ALERT SERVICE BULLETIN
ENGINE - Power Turbine Module - Power Turbine Shaft/Torque Reference Tube Magnetic
Insert Braze Inspection
POWER TURBINE DRIVE
SHAFT ASSEMBLY (16)
TORQUE SENSOR
TORQUE  TUBE (17)
SENSOR SEAL
(18)
AFT INSERT (20)
FORWARD  PIN (19)
INSERT
(22)
PT SHAFT
REAR PLUG
0-2.  POWER TURBINE  (23)
SHAFT (21)
PIN (19)
NOTE:
ALL IPB REFERENCES ARE FROM
SEI-676, FIGURE 3-12 UNLESS
SPECIFIED DIFFERENTLY.  6045655-00
Figure 2. Power Turbine Drive Shaft Assembly
February 28, 2024  T700 S/B 72-A0088
PAGE 10 of 12
GE PROPRIETARY INFORMATION - Subject to the restrictions on the cover or first page.
This document contains export-controlled information. See WARNING on first page.

### Page 17 (OCR)

GE
T700 TURBOSHAFT ENGINE  Aviation
ALERT SERVICE BULLETIN
ENGINE - Power Turbine Module - Power Turbine Shaft/Torque Reference Tube Magnetic
Insert Braze Inspection
REFERENCE
TABS
AFT END OF
POWER TURBINE
SHAFT
6045651-00
Figure 3. C-Sump and Aft End of Power Turbine Shaft
February 28, 2024  T700 S/B 72-A0088
PAGE 11 of 12
GE PROPRIETARY INFORMATION - Subject to the restrictions on the cover or first page.
This document contains export-controlled information. See WARNING on first page.

### Page 18 (OCR)

GE
T700 TURBOSHAFT ENGINE  Aviation
ALERT SERVICE BULLETIN
ENGINE - Power Turbine Module - Power Turbine Shaft/Torque Reference Tube Magnetic
Insert Braze Inspection
4. APPENDIX A
TABLE 1 - ENGINE SERIAL NUMBERS
(KNOWN TO GE THAT WERE SHIPPED FROM GE BETWEEN 2020 - OCTOBER 2023
Engine S/N  Engine S/N  Engine S/N
GE-E355694  GE-E355974  GE-E941307
GE-E355695  GE-E355976  GE-E941308
GE-E355698  GE-E355977  GE-E941309
GE-E355860  GE-E355978  GE-E941310
GE-E355867  GE-E355979  GE-E941346
GE-E355970  GE-E941347
GE-E355971  GE-E941348
GE-E355972  GE-E941349
TABLE 2 - SPARE POWER TURBINE DRIVE SHAFT ASSEMBLIES
(KNOWN TO GE THAT WERE SHIPPED FROM GE BETWEEN 2020 - OCTOBER 2023
Power Turbine  Power Turbine  Power Turbine  Power Turbine
Drive Shaft  Drive Shaft  Drive Shaft  Drive Shaft
P/N  S/N  P/N  S/N
5125T92G01  GATJC17K  5125T92G01  GATJAT3D
5125T92G01  GATJC1 PL  5125T92G01  GATJATWJ
5125T92G01  GATJC1HM  5125T92G01  GATJC88W
5125T92G01  GATJC1HP  5125T92G01  GATJC89E
5125T92G01  GATJC1KN  5125T92G01  GATJC89K
5125T92G01  GATJC1MD  5125T92G01  GATJC8CH
5125T92G01  GATJC1NC  5125T92G01  GATJC8CK
5125T92G01  GATJC2A3
February 28, 2024  T700 S/B 72-A0088
PAGE 12 of 12
GE PROPRIETARY INFORMATION - Subject to the restrictions on the cover or first page.
This document contains export-controlled information. See WARNING on first page.

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
