# Sikorsky Alert Service Bulletin 76-65-62

Copy: No revision named ("U.S. DOT/FAA - Sikorsky S-76 ASB 76-65-62"), 10 pages: PDF https://openairdocs.org/files/sha256/b3/78/b378e174b2f6fff42dfcd14492fc811f2d47cd7a7244606dcf6a461d81076aaf; text https://openairdocs.org/service-documents/sikorsky/sb-76-65-62/file/b378e174b2f6.md. Rights: © Sikorsky. Filed by the FAA in regulations.gov docket FAA-2013-0637; AD 2014-08-06 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Sikorsky](https://openairdocs.org/service-documents/sikorsky.md)
- Type: Service bulletin (Alert Service Bulletin)
- Number: 76-65-62
- Page: https://openairdocs.org/service-documents/sikorsky/sb-76-65-62

## ADs that cite it (2) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2014-08-06](https://openairdocs.org/ad/2014-08-06.md), effective Jun 2, 2014: No revision named
- [AD 2005-22-01](https://openairdocs.org/ad/2005-22-01.md), effective Nov 10, 2005: No revision named

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/sikorsky/sb-76-65-62/proposed.md).

## Text (10 pages)

Rights: © Sikorsky. Filed by the FAA in regulations.gov docket FAA-2013-0637; AD 2014-08-06 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

Sikorsky Aircraft Corporation
Sikorsky  6900 Main Street
P.O. Box 9729
A United Technologies Company  Stratford, Connecticut 06615-9129
(203) 386-4000
ALERT SERVICE BULLETIN
THIS ALERT SERVICE BULLETIN IS THE PROPERTY OF SIKORSKY AIRCRAFT CORPORATION AND IS PROTECTED UNDER THE COPYRIGHT LAWS OF THE UNITED
THIS ALERT SERVICE BULLETIN IS DISTRIBUTED ONLY TO OWNERS/OPERATORS OF  COMMERCIALLY-CERTIFIED SIKORSKY
BULLETIN ARE NOT TO BE DISCLOSED,
REPRODUCED, OR DISTRIBUTED,
LIMITED DISTRIBUTION • SIKORSKY AIRCRAFT CORPORATION 1999
ALL RIGHTS RESERVED
No. 76-65-62
Subject: ROTORS - Main Rotor Assembly - Lower Bifilar Support - One-Time Visual Inspection of
1. PLANNING INFORMATION
A. Effectivity
NOTE: Lower bifilar supports installed at the time of this Alert Service Bulletin (ASB) with
the component total time greater than 1500 hours and have not completed the
conditional maintenance check (stabilized torque), shall comply with this ASB and
the conditional maintenance check concurrently.
All S-76 Model helicopters with lower bifilar support having component total time greater
than 1500 hours as of the issue date of this ASB.
Part Number: 76107-08001-104 lower bifilar support.
B. Purpose
To perform a one time inspection of the lower bifilar support lugs for cracks.
Background:
Lower bifilar support assemblies have experienced cracking in the lug areas. This condition
was found on a customer's S-76C helicopter with stacked 3P/5P bifilar with 2199 flight
hours and a S-76C helicopter with a 3P bifilar with 10,320 flight hours. Cracked lugs were
found despite the lower support lug joining being torqued and stabilized. A one-time fleet
inspection and the addition of recurring inspections are necessary to detect cracked bifilar
lower support lugs. This will ensure fleet safety until corrective action can be taken.
December 14/04  Page 1 of 9  65-12-01

### Page 2 (OCR)

SIKORSKYD®
ALERT SERVICE BULLETIN
No. 76-65-62
ROTORS - Main Rotor Assembly - Lower Bifilar Support - One-Time Visual Inspection of
1. PLANNING INFORMATION (Continued)
C. Description
Helicopter is prepared for maintenance. The damper reservoir assembly is removed to gain
access to 3P/5P lower bifilar support. The bifilar lower support lug area is cleaned and
inspected for evidence of cracks. Any detection of cracking will require removal and replacement
of the lower bifilar support from service. If no cracks are detected, a torque check is done. If
no movement is detected, inspection is complete. Helicopter is returned to service. If movement
is detected, retorque nuts. A recurring torque check requirement of the nuts is performed until
stabilized. The damper reservoir assembly is reinstalled. Helicopter is returned to service.
D. Compliance
Compliance is essential. A Lower Bifilar Support having component total time greater than 1500
hours, perform this one-time inspection within 100 flight hours from the issue date of this ASB.
E. Approval
Inspection Item
F.  Manpower (Estimated)
No. of Men  No. of Hours  Man-Hours
Perform Inspection  4.0  4.0
on Bifilar lugs.
NOTE: Estimate does not include time required to prepare helicopter or return it to flight status.
G.  Material
None.
H. Tooling
None.
Weight and Balance
None.
J.  Electrical Load Data
None.
December 14/04  Page 2  65-12-01

### Page 3 (OCR)

IK@ASKYE®
ALERT SERVICE BULLETIN
No. 76-65-62
ROTORS - Main Rotor Assembly - Lower Bifilar Support - One-Time Visual Inspection of
1. PLANNING INFORMATION (Continued)
K. References
Applicable Maintenance Manual.
Applicable Standard Practice Manual.
Publications Affected
Temporary Revisions will be issued at a later date.
2 MATERIAL INFORMATION
A.  Consumable Material
WARNING  OBSERVE ALL CAUTIONS AND WARNINGS ON CONTAINERS WHEN
USING CONSUMABLES. WHEN APPLICABLE, WEAR NECESSARY
PROTECTIVE GEAR DURING HANDLING AND USE. IF A
CONSUMABLE IS FLAMMABLE OR EXPLOSIVE, MAKE CERTAIN
CONSUMABLE AND ITS VAPORS ARE KEPT AWAY FROM HEAT,
SPARK, AND FLAME. MAKE CERTAIN FIREFIGHTING EQUIPMENT IS
READILY AVAILABLE PRIOR TO USE. FOR ADDITIONAL
INFORMATION ON TOXICITY, FLASHPOINT, AND FLAMMABILITY OF
CHEMICALS, CONSULT YOUR MEDICAL PEOPLE, OR THE
MANUFACTURER OF THE CONSUMABLE.
As Req'd  Cheesecloth  CCC-C-440 or equivalent
As Req'd  Sentry Seal (Torque Seal)  No. F-1000 or equivalent
(Manufactured by Organic Products Co., P.O. Box 428, Irving, TX 75060)
As Req'd  Solvent  P-D-680 or equivalent
(Manufactured by Inland Technology, Inc., 401 E 27th Street, Tacoma WA 98421)
3. ACCOMPLISHMENT INSTRUCTIONS
A. Perform a one-time visual inspection of the lower bifilar support for cracks in the lug attachment
area as follows:
(1) Prepare helicopter for maintenance.
(2) Turn off all electrical and hydraulic power.
(3)  Remove damper reservoir assembly (76107-08050-041/-043) and cap per applicable
maintenance manual (Figure 1 and Photo 1).
December 14/04  Page 3  65-12-01

### Page 4 (OCR)

ORSKYIG®
ALERT SERVICE BULLETIN
No. 76-65-62
ROTORS - Main Rotor Assembly - Lower Bifilar Support - One-Time Visual Inspection of
3. ACCOMPLISHMENT INSTRUCTIONS (Continued)
(4)  As an alternate procedure regarding disconnecting of lines, draining fluid and bleeding in
chapter/section 65-12-10 the following procedure may be used:
NOTE:  Do not move blades during this operation.
(a)  Position any main rotor blade over the nose of the helicopter. Place absorbent
cheesecloth around flex hose from reservoir and union at lower bifilar support (3P) or
(3P/5P) line and union, at the arm towards the tail (reservoir high side).
(b)  Open connection and cap union, hose, or tube with clean uncontaminated caps.
(c)  Repeat steps (4)(a) and (4)(b), in section 3, for remaining three main rotor blades.
CAUTION  MOTION OF MAIN ROTOR BLADE MAY CAUSE AIR TO BE
DRAWN INTO DAMPERS.
(a)  Remove damper reservoir assembly (76106-08050-041/-043), and save for reinstallation
per applicable maintenance manual.
(5)  Clean six (6) lower bifilar support (76107-08001-104) lugs and the surrounding areas to
main rotor hub attachment areas, using solvent PD-680 or equivalent cleaner and clean
cloth (Figure 1 and 2 and Photo 1).
(6)  Perform a visual inspection of the lower bifilar support lugs six (6) for cracks. Pay
particular attention to the lug areas around the attachment nut surfaces. Refer to Figure 2
and Photo 1.
(7) If no cracks are detected, proceed to section B.
(8)  If cracks are detected, remove and replace lower bifilar support (76107-08001-104) per
applicable maintenance manual. Notify Sikorsky Aircraft Corporation. Proceed to section C.
(9)  Remove absorbent cheesecloth around flex hose from reservoir lines and unions, as
needed.
December 14/04  Page 4  65-12-01

### Page 5 (OCR)

DASKYIG®
ALERT SERVICE BULLETIN
No. 76-65-62
ROTORS - Main Rotor Assembly - Lower Bifilar Support - One-Time Visual Inspection of
3. ACCOMPLISHMENT INSTRUCTIONS (Continued)
B. Perform a torque check as follows:
(1)  Remove existing torque stripes if found.
NOTE: Following the one-time torque check, a recurring torque check must be done to
determine if any movement has occurred.
(2)  Set torque wrench to 780 inch-pounds. Apply torque and observe if there is any
movement of nut (SS5088-07) in six (6) places.
(a)  If movement is detected, apply required torque of 780 inch-pounds and perform
conditional maintenance check, torque stabilization (per applicable maintenance manual,
chapter/section 5-50-00, and 65-13-00).
(b)  If no movement is detected and torque of 780 inch-pounds has been reached, apply
torque striping per applicable standard practice manual.
(3)  Reinstall damper reservoir assembly (76107-08050-041/-043) per applicable maintenance
manual.
(4) Return helicopter to service.
C. Record of Compliance
(1) Make an appropriate logbook entry to show compliance with this ASB 76-65-62.
(2)  Upon compliance with this Alert Service Bulletin, complete attached ALERT SERVICE
BULLETIN COMPLIANCE RECORD CARD and return it to Sikorsky Aircraft Corporation.
December 14/04  Page 5  65-12-01

### Page 6 (OCR)

IKORSKYIG®
ALERT SERVICE BULLETIN
No. 76-65-62
5P CONFIGURATION
SEE 3P FOR INSPECTION
- DAMPER RESERVOIR ASSEMBLY
(REF)
76107-08001-104
LOWER BIFILAR SUPPORT
(REF)
- SEE FIGURE 2
3P CONFIGURATION
LOWER BIFILAR SUPPORT ASSEMBLY
FIGURE 1.
December 14/04  Page 6  10-21-99

### Page 7 (OCR)

S  IKORSKYG®
ALERT SERVICE BULLETU
No. 76-65-62
INSPECT LUG AREA
FOR CRACKS
(TYPICAL SIX PLACES)
LOOKING DOWN ON CENTER OF LOWER BIFILAR SUPPORT (76107-08001-104)
(DAMPER RESERVOIR ASSEMBLY REMOVED FOR CLARITY)
(TYPICAL CRACKING MODES SHOWN)
TD1294
LOWER BIFILAR SUPPORT INSPECTION LOCATIONS
FIGURE 2.
Page 7  65-12-01

### Page 8 (OCR)

IKORSKYI®
ALERT SERVICE BULLETIN
No. 76-65-62
INSPECTION AREA (TYPICAL SIX PLACES)
VIEW LOOKING DOWN ON CENTER OF LOWER BIFILAR SUPPORT (76107-08001-104)
(SHOWN WITH DAMPER RESERVOIR ASSEMBLY REMOVED FOR CLARITY)
CCMR005B
LOWER BIFILAR SUPPORT
PHOTO 1.
December 14/04  Page 8  65-12-01

### Page 9 (OCR)

(Fold over and tape closed)
SIKORSKY AIRCRAFT CORPORATION
FACSIMILE NUMBER (860) 998-7556
ATTENTION: DIRECTOR
COMMERCIAL CUSTOMER SERVICE
IMPORTANT NOTICE
Upon COMPLIANCE with the attached ASB. Sikorsky requests your cooperation in
completing and returning by mail or FAX this ENTIRE PAGE.
Please fill in the requested information at the bottom of the page, so we may maintain proper
records documenting the configuration of your aircraft. This information is useful when
determining configuration and effectivity of issues affecting fielded aircraft.
This request is in keeping with our policy to assure that our customers receive the latest
information applicable for the maintenance of your aircraft. Thank you.
ALERT SERVICE BULLETIN:  No. 76-65-62  Compliance Record Card
TITLE:  ROTORS - Main Rotor Assembly -Lower Bifilar Support - One-Time Visual
Inspection of
OWNER/OPERATOR:
SUBMITTED BY:  DATE
FOLLOWING SERIAL NUMBERS ARE NOT AFFECTED BY THIS ASB
ASB HAS BEEN COMPLIED WITH ON THE FOLLOWING SERIAL NUMBERS
- (Fold Up to Arrows)
SA 7673-2 Rev B

### Page 10 (OCR)

Sikorsky
A United Technologies Company  No Postage
Necessary
FIRST-CLASS MAIL PERMIT NO. 432 BRIDGEPORT CT
POSTAGE WILL BE PAID BY ADDRESSEE
SIKORSKY AIRCRAFT CORPORATION
P.O. BOX 9729
6900 MAIN STREET
STRATFORD, CONNECTICUT 06615-9129 U.S.A.
ATTENTION:  DIRECTOR
COMMERCIAL CUSTOMER SERVICE
WORLDWIDE CUSTOMER SERVICE
Please complete the form on the reverse side and FAX to
FACSIMILE NUMBER (860) 998-7556
or fold and return ENTIRE form to Sikorsky Aircraft Corporation

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
