# Sikorsky Alert Service Bulletin 92-62-009

## Copies (2)

Copies the FAA filed in AD dockets on regulations.gov, newest revision first. A newer revision may exist.

- No revision named ("Sikorsky ASB 92-62-009"), 8 pages: PDF https://openairdocs.org/files/sha256/bb/f8/bbf8adb93afd583f2e7ebaa7a0644db054f1e2a86daccbfe245368947a76d464; text https://openairdocs.org/service-documents/sikorsky/sb-92-62-009/file/bbf8adb93afd.md. Rights: © Sikorsky. Filed by the FAA in regulations.gov docket FAA-2023-0018, the docket of AD 2023-09-07. Not covered by OpenAirDocs’ CC0 dedication.
- No revision named ("Sikorsky S-92 Helicopter ASB 92-62-009"), 8 pages: PDF https://openairdocs.org/files/sha256/38/70/38705a963da863b91be0b1002c39ea9cef41e10a0e3b7262ccbf2b9f47e58bc0; text https://openairdocs.org/service-documents/sikorsky/sb-92-62-009/file/38705a963da8.md. Rights: © Sikorsky. Filed by the FAA in regulations.gov docket FAA-2021-0689, the docket of AD 2022-02-01. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Sikorsky](https://openairdocs.org/service-documents/sikorsky.md)
- Type: Service bulletin (Alert Service Bulletin)
- Number: 92-62-009
- Page: https://openairdocs.org/service-documents/sikorsky/sb-92-62-009

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/sikorsky/sb-92-62-009/proposed.md).

## Text (8 pages)

No revision named, the newest copy. Rights: © Sikorsky. Filed by the FAA in regulations.gov docket FAA-2023-0018, the docket of AD 2023-09-07. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

ATA 
62-31-01 
ONE-TIME 
INSPECTION 
S-92® HELICOPTER 
ALERT SERVICE  
BULLETIN 
NOTICE TO ALL PERSONS RECEIVING THIS DOCUMENT: 
WARNING: THIS DOCUMENT, OR AN EMBODIMENT OF IT IN ANY MEDIA, DISCLOSES INFORMATION WHICH IS PROPRIETARY, IS THE PROPERTY OF LOCKHEED MARTIN CORPORATION AND/OR ITS SUBSIDIARIES, IS 
AN UNPUBLISHED WORK PROTECTED UNDER APPLICABLE COPYRIGHT LAWS, AND IS DELIVERED ON THE EXPRESS CONDITION THAT IT IS NOT TO BE USED, DISCLOSED, REPRODUCED, IN WHOLE OR IN PART 
(INCLUDING REPRODUCTION AS A DERIVATIVE WORK), OR USED FOR MANUFACTURE FOR ANYONE OTHER THAN LOCKHEED MARTIN CORPORATION AND/OR ITS SUBSIDIARIES WITHOUT ITS WRITTEN CONSENT, 
AND THAT NO RIGHT IS GRANTED TO DISCLOSE OR SO USE ANY INFORMATION CONTAINED HEREIN. ALL RIGHTS RESERVED. ANY ACT IN VIOLATION OF APPLICABLE LAW MAY RESULT IN CIVIL AND CRIMINAL 
PENALTIES. 
S-92® IS A REGISTERED TRADEMARK OF SIKORSKY AIRCRAFT CORPORATION. 
ASB 92-62-009 
Basic Issue ▪ February 6/19 
SUBJECT: ROTORS – Main Rotor (MR) Swashplate Assembly – One-Time Visual Inspection of MR 
Stationary Swashplate Assembly for Cracks 
Section 1. P LANNING INFORMATION 
A. Effectivity All MR stationary swashplate assemblies (92104-15011-042 or -043) with more 
than 1600 hours Time Since New (TSN), including spares. 
B. Purpose To provide instructions for a 
one-time inspection of MR stationary swashplate 
assembly for cracks. 
C. Background An occurrence of an in-service crack was reported on MR stationary swashplate 
assembly inner ring during a recurring inspection. An inspection has been 
developed to determine if cracks are present. If cracks are found, the swashplate 
assembly, uniball bearing, trunnions, and all attachment hardware shall be 
returned to Sikorsky for further investigation. 
D. Description Helicopter is prepared for inspection. Visual inspection of MR stationary 
swashplate assembly is performed. If cracks are found, swashplate assembly is 
removed and replaced and Sikorsky Customer Service Engineering is contacted. If 
any other damage is found, Sikorsky Customer Service Engineering is contacted 
with damage information. Helicopter is returned to service. 
E. Compliance Compliance is essential. The inspection outlined herein shall be accomplished 
within 50 flight hours or no later than February 13, 2019, whichever occurs first. 
Sikorsky Aircraft Corporation 
6900 Main Street P.O. Box 9729 
Stratford, Connecticut 06615-9129 
(203) 386-4000 
 
 
Page 1 of 6 
WARNING – This file contains export controlled information subject to the EAR. ECCN EAR99

### Page 2

S-92 ALERT ASB 92-62-009 
SERVICE BULLETIN Basic Issue ▪ February 6/19 
ATA 
62-31-01 
ONE-TIME 
INSPECTION 
Section 1. P LANNING lNFORMATION (Continued) 
F. Approval Inspection item. 
G. Manpower (Estimated) 
Task No. of Men No. of Hours Man-Hours* 
Visual Inspection of MR Stationary 
Swashplate Assembly 
1 0.5 0.5 
Total Man-Hours   0.5 
*Estimate does not include time required to prepare helicopter or return it to flight status.  
 
H. Tooling 
None. 
I. Weight and Balance 
Not affected. 
J. Electrical Load Data 
Not affected. 
K. Software Load Data 
Not changed. 
L. References 
Maintenance Manual SA S92A-AMM-000, Tasks 62-31-01-900-001/-002. 
M. Publications Affected 
(1) Temporary Revision 62-39 against Maintenance Manual, SA S92A-AMM-000, Task 62-31-
00-215-001 will be released at a later date. 
(2) Temporary Revision 62-40 against Maintenance Manual, SA S92A-AMM-000, Task 62-31-
01-210-001 will be released at a later date. 
N. Attachment 
None. 
 
Page 2 
This file contains export controlled information. See WARNING on first page.

### Page 3

ASB 92-62-009 S-92 ALERT 
Basic Issue ▪ February 6/19 SERVICE BULLETIN 
ATA 
62-31-01 
ONE-TIME 
INSPECTION 
Section 2. M ATERIAL INFORMATION 
A. Basis for Material Data 
Per helicopter. 
B. Bill of Material 
None. 
C. Consumable Material 
None. 
Section 3. A CCOMPLISHMENT INSTRUCTIONS 
A. Prepare helicopter for inspection: 
 
(1) Turn off all helicopter electrical and hydraulic power. 
(2) Engage rotor brake. 
NOTE: Disassembly of swashplate assembly is not required. All visual inspections shall be 
conducted with trunnions and hardware in place. 
B. Visually inspect MR stationary swashplate assembly as follows: 
(1) If necessary, disengage rotor brake, rotate MR to improve accessibility, and reengage rotor 
brake. 
(2) Inspect around entire circumference of upper and lower surfaces of MR stationary 
swashplate assembly inner ring and upper and lower surfaces of trunnion attachment 
areas for cracks. (Refer to Figure 1). 
(a) If cracks are found, remove swashplate assembly from service and install 
serviceable swashplate assembly. (Refer to Maintenance Manual SA S92A-AMM-
000, Tasks 62-31-01-900-001/-002). Contact Sikorsky Customer Service 
Engineering at 1-800-WINGED-S or e-mail: wcs_cust_service_eng.gr-
sik@lmco.com and proceed to step C. 
(b) If nicks, dents, scratches, and/or any other damage is found, contact Sikorsky 
Customer Service Engineering at 1-800-WINGED-S or e-mail: 
wcs_cust_service_eng.gr-sik@lmco.com and provide location, size (length, width, 
and depth) and photos of damage for disposition. After performing disposition, 
proceed to step C. 
(c) If no cracks, nicks, dents or any other damage is found, proceed to step C. 
TO PREVENT ELECTRICAL SHOCK OF PERSONNEL OR 
POSSIBLE DAMAGE TO HELICOPTER COMPONENTS, MAKE 
SURE TO TURN OFF ALL ELECTRICAL POWER. 
 
Page 3 
This file contains export controlled information. See WARNING on first page.

### Page 4

S-92 ALERT ASB 92-62-009 
SERVICE BULLETIN Basic Issue ▪ February 6/19 
ATA 
62-31-01 
ONE-TIME 
INSPECTION 
Section 3. A CCOMPLISHMENT INSTRUCTIONS (Continued) 
C. Record Alert Service Bulletin (ASB) inspection on component log card for swashplate assembly 
(92104-15000-043/-044). 
D. Return helicopter to service.  
 
Page 4 
This file contains export controlled information. See WARNING on first page.

### Page 5

ASB 92-62-009 S-92 ALERT 
Basic Issue ▪ February 6/19 SERVICE BULLETIN 
ATA 
62-31-01 
ONE-TIME 
INSPECTION 
Section 3. A CCOMPLISHMENT INSTRUCTIONS (Continued) 
 
MR STATIONARY SWASHPLATE ASSEMBLY INSPECTION LOCATIONS 
FIGURE 1  
TD4825
SA
TOP VIEW
TRUNNION ATTACHMENT INSPECTION LOCATIONS
SECTION A−A
INNER RING INSPECTION LOCATION
(TRUNNION NOT SHOWN FOR CLARITY)
AA
BOTTOM VIEW
 
Page 5 
This file contains export controlled information. See WARNING on first page.

### Page 6

S-92 ALERT ASB 92-62-009 
SERVICE BULLETIN Basic Issue ▪ February 6/19 
ATA 
62-31-01 
ONE-TIME 
INSPECTION 
Section 3. A CCOMPLISHMENT INSTRUCTIONS (Continued) 
E. Record of compliance: 
(1) Make helicopter logbook entries to show compliance with this ASB as follows: 
(a) Make helicopter level logbook entry on form SA7343-15 (Aircraft ASB Release 
Signoff). 
(b) When ASB modifies a component that can be removed from this helicopter: 
1. Make component log card entries on forms SA7343-22 (Aircraft Component 
Log Cards) and SA7343-21 (Component Log Cards), as applicable. 
2. If a component modified by this ASB does not have a log card and the ASB 
does not create one, then annotate compliance on the next higher assembly 
that the component belongs to which does have a log card. 
NOTE: If access to www.Sikorsky360.com is unavailable, complete attached ALERT 
SERVICE BULLETIN COMPLIANCE RECORD CARD and return it to Sikorsky 
Aircraft Corporation. 
(2) Make an appropriate electronic compliance entry in the E-Notification section at 
www.Sikorsky360.com. Refer to User Guide located on the www.Sikorsky360.com/E-
Notification Search page. 
 
Page 6 
This file contains export controlled information. See WARNING on first page.

### Page 7

(Fold over and tape closed) 
SIKORSKY AIRCRAFT CORPORATION 
FACSIMILE NUMBER (817) 762-6715 
EMAIL ADDRESS: product_safety.gr-sik@lmco.com 
ATTENTION: Gr-SIK, Product_Safety 
SIKORSKY AIRCRAFT CORPORATION 
 
(Fold Up to Arrows) 
IMPORTANT NOTICE 
Upon COMPLIANCE with the attached ASB, Sikorsky requests your cooperation 
in completing and returning this ENTIRE PAGE by MAIL, FAX, or scan & 
EMAIL. 
Please fill in the requested information at the bottom of the page, so we may maintain 
proper records documenting the configuration of your aircraft. This information is useful 
when determining configuration and effectivity of issues affecting fielded aircraft. 
This request is in keeping with our policy to assure that our customers receive the latest 
information applicable for the maintenance of your aircraft. Thank you. 
ALERT SERVICE BULLETIN:  ________________  Compliance Record Card 
TITLE:  ___________________________________________________________________  
  ___________________________________________________________________  
  ___________________________________________________________________  
OWNER/OPERATOR:  _____________________________________________________  
SUBMITTED BY:  ___________________________  DATE:  ____________________  
FOLLOWING SERIAL NUMBERS ARE NOT AFFECTED BY THIS ASB 
ASB HAS BEEN COMPLIED WITH ON HELICOPTER SERIAL NUMBERS: 
 ___________   ___________   ___________   ___________   ___________   ___________  
 ___________   ___________   ___________   ___________   ___________   ___________  
                  
No. 92-62-009 
ROTORS – Main Rotor (MR) Swashplate Assembly – One-Time Visual Inspection 
of MR Stationary Swashplate Assembly for Cracks 
This file contains export controlled information. See WARNING on first page.

### Page 8

No Postage 
Necessary 
BUSINESS REPLY MAIL 
FIRST-CLASS MAIL PERMIT NO. 432 BRIDGEPORT CT 
POSTAGE WILL BE PAID BY ADDRESSEE 
SIKORSKY AIRCRAFT CORPORATION 
Commercial Systems and Services 
Mailstop K100 
124 QUARRY ROAD 
TRUMBULL, CT 06611 U.S.A.   
ATTENTION:   
Gr-SIK, Product_Safety 
  
Please complete the form on the reverse side and FAX to 
FACSIMILE NUMBER (817) 762-6715 
Or scan and email to: 
EMAIL ADDRESS: product_safety.gr-sik@lmco.com 
or fold and return ENTIRE form to Sikorsky Aircraft Corporation 
This file contains export controlled information. See WARNING on first page.

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
