# Sikorsky Alert Service Bulletin 92-63-018

Copy: No revision named ("Sikoeaky ASB No 92-63-018"), 16 pages: PDF https://openairdocs.org/files/sha256/fb/d5/fbd5e069b4c2a92321187a5a11ce4ab907ced0e4f19f860776ffe10eb98c2310; text https://openairdocs.org/service-documents/sikorsky/sb-92-63-018/file/fbd5e069b4c2.md. Rights: © Sikorsky. Filed by the FAA in regulations.gov docket FAA-2009-1130; AD 2009-25-10 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Sikorsky](https://openairdocs.org/service-documents/sikorsky.md)
- Type: Service bulletin (Alert Service Bulletin)
- Number: 92-63-018
- Page: https://openairdocs.org/service-documents/sikorsky/sb-92-63-018

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2009-25-10](https://openairdocs.org/ad/2009-25-10.md), effective Dec 21, 2009: No revision named

## Text (16 pages)

Rights: © Sikorsky. Filed by the FAA in regulations.gov docket FAA-2009-1130; AD 2009-25-10 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

Sikorsky Aircraft Corporation
Sikorsky  6900 Main Street
P.O. Box 9729
A United Technologies Company  Stratford, Connecticut 06615-9129
(203) 386-4000
ALERT SERVICE BULLETIN
THIS ALERT SERVICE BULLETIN IS THE PROPERTY OF SIKORSKY AIRCRAFT CORPORATION AND IS PROTECTED UNDER THE COPYRIGHT LAWS OF THE
SIKORSKY ALICOPTERS AND SIKORSKY AUTHORIZED GISTIC AND STAVICE SINTERS FOR THE PURPOSE OF FOSTERING HE SAFE AND EFFICIENED  AND OTHER COUNTRIES.
DISCLOSED, REPRODUCED,
LIMITED DISTRIBUTION • SIKORSKY AIRCRAFT CORPORATION 1999
ALL RIGHTS RESERVED
No. 92-63-018
Subject:  ROTOR DRIVES - Main Module Assembly - Main Gearbox (MGB) Lube System Filter
Components - One-Time Visual Inspection of Filter Bowl Elements
1. PLANNING INFORMATION
A.  Effectivity
S-92A model helicopters delivered with serial numbers 920006 through 920109 which have
undergone a replacement of the Main Gearbox lube system filter.
Component
Filter Assembly, MGB Lube System 92351-15802-101
B.  Purpose
To perform a one-time visual inspection for damaged oil filter elements and replacement of
double bypass valve packings.
Background
An incorrect part number identification for the Main Gearbox oil filter double bypass valve
assembly packing has been discovered in the S-92 maintenance manual. If the incorrect
packing has been installed, it is possible to cause damage to the oil filter elements during
the installation process. Operation with a damaged oil filter element is potentially
detrimental to the oil filter attaching studs.
C.  Description
Helicopter is prepared for maintenance. Central cover is removed, if required. MGB oil filter
assembly is removed and primary and secondary filter elements are inspected for damage.
Double bypass valve packing is removed and replaced. If filter elements are found to be
damaged, filter bowl mounting studs and filter elements are replaced. MGB Lube System
July 01/09  Page 1 of 15  63-24-01

### Page 2 (OCR)

ALERT SERVICE BULLETIN
No. 92-63-018
ROTOR DRIVES - Main Module Assembly - Main Gearbox (MGB) Lube System Filter Components - One-
Time Visual Inspection of Filter Bowl Elements
1. PLANNING INFORMATION (Continued)
Filter Assembly is installed into MGB and main transmission is serviced. A ground test
procedure is performed, and helicopter is returned to service.
D. Compliance
Compliance is essential. The one-time inspection outlined herein is to be accomplished within 7
days from the issue date of this ASB.
E. Approval
The change effected by this document is classified as Major, and is FAA approved in
accordance with the applicable requirements of Federal Aviation Regulations FAR 29. This
constitutes EASA approval under the terms of the current interim procedures for working with
the European Community on airworthiness certification and continued airworthiness. The repair
data provided in this document is automatically approved by ED Decision 2004/04/CF, as
amended by ED Decision 2007/001/C. Reference to the ED Decisions mentioned above shall be
made in the release documents issued by the EASA 145 approved organization, releasing the
F. Manpower (Estimated)
No. of Men  No. of Hours  *Man-Hours
Removal of Oil Filter  1  0.50  0.50
Assembly
Removal of Filter Bowl  1  1.50  1.50
Mounting Assembly Studs
Install Filter Bowl  1  1.50  1.50
Mounting Assembly Studs
Reinstallation of Oil  1  0.50  0.50
Filter Assembly
NOTE: *Estimate does not include time required to prepare helicopter or return it to flight status.
G. Material
One-quart container, or equivalent.
H.  Tooling
NOTE: For tooling availability, contact Helicopter Support Inc. Refer to Material Information
section of this ASB.
(1) Lockring Cutter, BT309, or equivalent.
July 01/09  Page 2  63-24-01

### Page 3 (OCR)

ALERT SERVICE BULLETIN
No. 92-63-018
ROTOR DRIVES - Main Module Assembly - Main Gearbox (MGB) Lube System Filter Components - One-
Time Visual Inspection of Filter Bowl Elements
1. PLANNING INFORMATION (Continued)
(2)  Lockring Drive Tool, S101D12, M101D12N, or equivalent.
(3)  Stud Install Wrench, R1105W, or equivalent.
(4) Housing, Tapered Collet 1/4- 28, CG500-4, or equivalent.
Weight and Balance
None.
J. Electrical Load Data
Not affected.
K. Software Load Data
Not applicable.
References
(1) Maintenance Manual, SA S92A-AMM-000, Chapter/Section 63-24-02-900-002.
(2) Maintenance Manual, SA S92A-AMM-000, Chapter/Section 54-40-01.
(3) Maintenance Manual, SA S92A-AMM-000, Chapter/Section 63-20-00-610-001.
(4) Maintenance Manual, SA S92A-AMM-000, Chapter/Section 63-24-02-900-002.
(5) Functional Check Flight Procedures Manual, SA S92A-FCP-000.
M. Publications Affected
Temporary Revision No. 63-19 against Maintenance Manual, SA S92A-AMM-000, Chapters/
Sections 63-24-02, has been issued to revise removal and installation procedures of lube
system filter bowl components.
N. Attachment
None.
July 01/09  Page 3  63-24-01

### Page 4 (OCR)

ALERT SERVICE BULLETIN
No. 92-63-018
ROTOR DRIVES - Main Module Assembly - Main Gearbox (MGB) Lube System Filter Components - One-
Time Visual Inspection of Filter Bowl Elements
2. MATERIAL INFORMATION
A.  Basis for Material Data
Per helicopter.
B. Bill of Material
New Part No.  Qty  Key Word  Old Part No.  Instructions/
Disposition
M83248/1-033  1  Packing  M83248/1-033  (1)
SS5086-04  Nut  SS5086-04  (1)
SLS11FJ101-  Stud  SLS11FJ101-  (1)
11SN12A  11SN12A
(DMYNO-97393-  (DMYNO-97393-
503)  503)
MS51990-105P  Lockring  MS51990-105P  (1)
70351-38801-102  1  Filter Element,  70351-38801-102  (1)
Primary
70351-38801-103  1  Filter Element,  70351-38801-103  (1)
Secondary
M83248/1-134  2  Packing  M83248/1-134  (1)
M83248/1-238  Packing  M83248/1-238  (1)
M83248/1-022  1  Packing  M83248/1-022  (1)
(1)  For cost of parts, tooling, and lead time requirements, contact your Customer Service
Representative at Helicopter Support, Inc (HSI). Submit a purchase order referencing the
ASB number and helicopter serial numbers upon which these will be used. This will allow
HSI and the operator to track shipment and receipt of parts. Orders will be accepted by
letter, telephone, facsimile (FAX), or HSI website: www.HSIUS.com. For prompt shipment,
reference address of each shipping destination. Direct your order to:
HELICOPTER SUPPORT INC.
124 Quarry Road
P.O. Box 11068
Trumbull, CT 06611
July 01/09  Page 4  63-24-01

### Page 5 (OCR)

ALERT SERVICE BULLETIN
No. 92-63-018
ROTOR DRIVES - Main Module Assembly - Main Gearbox (MGB) Lube System Filter Components - One-
Time Visual Inspection of Filter Bowl Elements
2. MATERIAL INFORMATION
Attn: Customer Service
FAX: (203) 416-4291 Telephone: (203) 416-4000
HSI website: www.HSIUS.com
C.  Consumable Material
WARNING  OBSERVE ALL CAUTIONS AND WARNINGS ON CONTAINERS WHEN
USING CONSUMABLES. WHEN APPLICABLE, WEAR NECESSARY
PROTECTIVE GEAR DURING HANDLING AND USE. IF A
CONSUMABLE IS FLAMMABLE OR EXPLOSIVE, MAKE CERTAIN
CONSUMABLE AND ITS VAPORS ARE KEPT AWAY FROM HEAT,
SPARK, AND FLAME. MAKE CERTAIN FIREFIGHTING EQUIPMENT IS
READILY AVAILABLE PRIOR TO USE. FOR ADDITIONAL
INFORMATION ON TOXICITY, FLASHPOINT, AND FLAMMABILITY OF
CHEMICALS, CONSULT YOUR MEDICAL PEOPLE, OR THE
MANUFACTURER OF THE CONSUMABLE.
INSTRUCTIONS/
QTY  KEY WORD  NOMENCLATURE  DISPOSITION
AS REQ'D  ISOPROPYL ALCOHOL  COMMERCIAL GRADE OR  (1)
EQUIVALENT
AS REQ'D  Q-TIP  COMMERCIAL GRADE OR  (1)
EQUIVALENT
AS REQ'D  LINT FREE CLOTH  CCC-C-440 OR EQUIVALENT  (1)
AS REQ'D  LUBRICATING OIL  DOD-PRF-85743  (1)
OR EQUIVALENT
AS REQ'D  CLEAR EPOXY  MIL-PRF-22750  (2)
OR EQUIVALENT
AS REQ'D  EPOXY PRIMER  MIL-P-85582,  (3)
MIL-P-23377,
OR EQUIVALENT
AS REQ'D  SEALING COMPOUND  AMS 3265 TYPE 2  (4)
CHEM SEAL (CS)
5500CI CLASS B
OR EQUIVALENT
(1)  Locally procure.
(2) Manufactured by Chesapeake Bay Coatings, Website: http://chesapeakebaycoatings.com/
July 01/09  Page 5  63-24-01

### Page 6 (OCR)

ALERT SERVICE BULLET IN
No. 92-63-018
ROTOR DRIVES - Main Module Assembly - Main Gearbox (MGB) Lube System Filter Components - One-
Time Visual Inspection of Filter Bowl Elements
2. MATERIAL INFORMATION
(3)  Manufactured by Trans Chem Coatings-Industrial Finishes, Website: http://www.trans-
chem.com/
(4)  Manufactured by Flamemaster, Website: http://www.flamemaster.com/
3. ACCOMPLISHMENT INSTRUCTIONS
A. Perform one-time inspection of MGB Lube System Filter Assembly as follows:
(1)  Prepare helicopter for maintenance.
(2)  Turn off electrical and hydraulic power.
(3)  Remove central cover, if required. Refer to Maintenance Manual, SA S92A-AMM-000,
Chapter/Section 54-40-01.
(4)  Remove MGB Lube System Filter Assembly 92351-15802-101. Refer to Maintenance
Manual, SA S92A-AMM-000, Chapter/Section 63-24-02, T-Rev 63-19.
(5)  Visually inspect primary filter element (70351-38801-102) for damage as follows:
NOTE: The following criteria constitutes damage.
(a)  Presence of "wavy" pleats - pleats should be straight and parallel with each other.
Refer to Figure 1.
(b)  Presence of internal buckling - interior of filter element should be free from cracks and
buckling. Refer to Figure 2.
(c)  Presence of indented dimples - dimples on filter element should extend out of the
surface rather than be pushed into the surface. Refer to Figure 3.
(6)  If primary filter element (70351-38801-102) does not exhibit damage using the above
criteria, proceed to secondary filter element inspection in Step (8).
If primary filter element (70351-38801-102) exhibits damage using the above criteria, or if
operator suspects that aircraft has flown with damaged elements since compliance with
ASB 92-63-014A, oil filter elements, packings, and filter bowl mounting studs must be
July 01/09  Page 6  63-24-01

### Page 7 (OCR)

ALERT SERVICE BULLETIN
No. 92-63-018
ROTOR DRIVES - Main Module Assembly - Main Gearbox (MGB) Lube System Filter Components - One-
Time Visual Inspection of Filter Bowl Elements
3. ACCOMPLISHMENT INSTRUCTIONS (Continued)
(8) Visually inspect secondary filter element (70351-38801-103) for damage as follows:
NOTE: The following criteria constitutes damage.
(a)  Presence of "wavy" pleats - pleats should be straight and parallel with each other.
Refer to Figure 4.
(b)  Presence of elongated cup - cup at end of element should not appear stretched or
elongated. Refer to Figure 5.
(9)  If secondary filter element (70351-38801-103) does not exhibit damage using the above
criteria, proceed to packing replacement in Section B.
(10) If secondary filter element (70351-38801-103) exhibits damage using the above criteria, or
if operator suspects that aircraft has flown with damaged elements since compliance with
ASB 92-63-014A, oil filter elements, packings, and filter bowl mounting studs must be
B.  Replace MGB Lube System Filter Assembly packing as follows:
Remove double bypass valve (AA-C367BV-16D09A). Refer to Maintenance Manual, SA
S92A-AMM-000, Chapter/Section 63-24-02, T-Rev 63-19.
(2)  Remove packing (M83248/1-033) from double bypass valve (AA-C367BV-16D09A) and
install new packing (M83248/1-033) using packing installation tool (WE301K).
Install remainder of MGB Lube System Filter Assembly elements per Maintenance Manual,
SA S92A-AMM-000, Chapter/Section 63-24-02, T-Rev 63-19 using new packings.
(4) Proceed to Section C. Step (20).
C. Replace MGB Lube System Filter Assembly elements and mounting studs as follows:
WARNING  TAKE ANY STEPS NECESSARY TO ENSURE THAT NO FOREIGN
OBJECTS FALL INTO THE GEARBOX DURING THE REMOVAL AND
REPLACEMENT OF STUDS AND LOCKRINGS.
NOTE:  This procedure is to be used for removal and installation of all three Lube
System Filter Assembly studs.
(1) Remove packing (M83248/1-238).
July 01/09  Page 7  63-24-01

### Page 8 (OCR)

ALERT SERVICE BULLETIN
No. 92-63-018
ROTOR DRIVES - Main Module Assembly - Main Gearbox (MGB) Lube System Filter Components - One-
Time Visual Inspection of Filter Bowl Elements
3. ACCOMPLISHMENT INSTRUCTIONS (Continued)
NOTE: Housing must be free from damage or corrosion in order to proceed with stud
replacement.
(2)  Carefully inspect the three studs where they attach to the MGB housing.
(3)  Mask MGB filter bowl inside diameter to prevent foreign objects from entering housing.
CAUTION  CAUTION MUST BE USED WHEN DRILLING SO AS TO
PREVENT DAMAGE FROM DRILLING TOO DEEP.
(4)  Using hand drill and lockring cutter (BT309, or equivalent), cut lockring securing studs
(SLS11FJ101-11SN12A, DMYNO-97393-503) (typical three places) as follows:
(a)  Operate drill at slow speed.
Drill a short way through, and stop, checking cutter depth, (just enough to cut lockring).
(c)  If lockring is not cut, repeat drilling, maintaining a slow drill speed, until lockring is
either cut through, or cut enough so that it can be collapsed.
(a)  Remove lockring.
CAUTION  AVOID CONTACT WITH HOUSING WHEN USING REMOVAL
TOOL.
(5)  Using stud tool (Stud Install Wrench, R1105W, or equivalent) wind out stud (SLS11FJ101-
11SN12A, DMYNO-97393-503) by rotating counterclockwise, (typical three places). Return
removed studs to HSI, refer to Material Information section of this ASB for shipping
information.
(6)  Thoroughly clean out tapped hole using Isopropyl Alcohol (commercial grade, or
equivalent) and Q-tip (commercial grade, or equivalent), and shop air.
(7)  Visually inspect tapped holes for signs of damage. If any damage to threads is detected,
stop work and contact a Sikorsky Field Service Representative, Customer Service
Manager or Customer Service engineering at 1-800-WINGED-S or 1-203-416-4299 for
assistance.
NOTE: • Presence of serrations on entire counterbore (360°) is acceptable.
• Serrations in housing must be intact, and mating serrations of lockring must line
up exactly with serrations in housing.
• If rework of MGB housing is required, contact Sikorsky Field Service
Representative, Customer Service Manager or Customer Service engineering at
1-800-WINGED-S or 1-203-416-4299.
July 01/09  Page 8  63-24-01

### Page 9 (OCR)

ALERT SERVICE BULLETIN
No. 92-63-018
ROTOR DRIVES - Main Module Assembly - Main Gearbox (MGB) Lube System Filter Components - One-
Time Visual Inspection of Filter Bowl Elements
3. ACCOMPLISHMENT INSTRUCTIONS (Continued)
(8) Visually inspect housing lockring counterbore to determine suitability for installation of new
lockring.
(9)  Locate serrations in MGB housing - teeth of new lockring (MS51990-105P) will be
installed in exactly the same location.
NOTE: Stud shall be installed while epoxy primer is wet.
(10) Apply epoxy primer (MIL-P-85582, MIL-P-23377, or equivalent) onto threads of new stud.
NOTE: • External spline of stud should be .010-.020-inch below mounting surface.
• Make sure new lockring teeth align with serrations in housing.
(11) Thread new stud (SLS11FJ101-11SN12A, DMYNO-97393-503) into MGB housing tapped
hole, using stud tool (Stud Install Wrench, R1105W, or equivalent).
(12) Install lockring by placing lockring over stud and onto MGB housing lockring counterbore
so that lockring internal spline aligns with stud external spline.
(13) Set lockring into MGB housing lockring counterbore using lockring drive tool (S101D12,
M101D12N, or equivalent).
(14) Clean and coat rock hard coating with clear epoxy (MIL-PRF-22750, or equivalent).
(15) Apply sealing compound (AMS 3265, Type 2, or equivalent) to lockring (MS51990-105P).
(16) Remove all squeeze-out in lockring counterbore using lint free cloth (CCC-C-440, or
equivalent).
(17)  Clean any residue using Isopropyl Alcohol (commercial grade, or equivalent) and lint free
cloth (CCC-C-440, or equivalent).
(18) Remove masking from MGB filter bowl diameter.
(19) Reinstall MGB oil filter assembly using new secondary filter element (70351-38801-103),
new primary filter element (70351-38801-102), and new packings as required. Refer to
Maintenance Manual, SA S92A-AMM-000, Chapter/Section 63-24-02, T-Rev 63-19.
(20) Service main transmission. Refer to Maintenance Manual, SA S92A-AMM-000, Chapter/
Section 63-20-00-610-001.
(21) Examine components for security. Make sure area is clean and free of foreign objects.
(22) Reinstall central cover, if removed. Refer to Maintenance Manual, SA S92A-AMM-000,
Chapter/Section 54-40-01.
July 01/09  Page 9  63-24-01

### Page 10 (OCR)

ALERT SERVICE BULLETIN
No. 92-63-018
ROTOR DRIVES - Main Module Assembly - Main Gearbox (MGB) Lube System Filter Components - One-
Time Visual Inspection of Filter Bowl Elements
3. ACCOMPLISHMENT INSTRUCTIONS (Continued)
(23) Do ground test procedures. Refer to Functional Check Flight Procedures Manual, SA
S92A-FCP-000.
(24) Return helicopter to service.
D. Record of Compliance
(1) Make an appropriate logbook entry to show compliance with this ASB 92-63-018.
(2) Upon compliance with this ASB, complete attached ALERT SERVICE BULLETIN
COMPLIANCE RECORD CARD and return it to Sikorsky Aircraft Corporation.
July 01/09  Page 10  63-24-01

### Page 11 (OCR)

ALERT SERVICE BULLETIN
No. 92-63-018
PRIMARY ELEMENT
70351-38801-102  MAJOR CRUSHING
OF PRIMARY ELEMENT
NOT DAMAGED  DAMAGED  TD1674_1
INSPECTION CRITERIA FOR PRIMARY ELEMENT, "WAVY PLEATS"
FIGURE 1
July 01/09  Page 11  63-24-01

### Page 12 (OCR)

ALERT SERVIGE BULLETIN
No. 92-63-016
PRIMARY ELEMENT
70351-38801-102
NOT DAMAGED
compression
DAMAGED
INSPECTION CRITERIA FOR PRIMARY ELEMENT, INTERNAL BUCKLING
FIGURE 2
July 01/09  Page 12

### Page 13 (OCR)

ALERT SERVICE BULLETIN
No. 92-63-018
PRIMARY ELEMENT
70351-38801-102
00
NOT DAMAGED  DAMAGED
TD1674 3
INSPECTION CRITERIA FOR PRIMARY ELEMENT, INDENTED DIMPLES
FIGURE 3
July 01/09  Page 13  63-24-01

### Page 14 (OCR)

ALERT SERVICE BULLETIN
No. 92-63-018
SECONDARY ELEMENT
70351-38801-103  MAJOR CRUSHING
OF SECONDARY ELEMENT
NOT DAMAGED  DAMAGED  TD1674 4
INSPECTION CRITERIA FOR SECONDARY ELEMENT, "WAVY PLEATS"
FIGURE 4
July 01/09  Page 14  63-24-01

### Page 15 (OCR)

ALERT SERVICE BULLETIN
No. 92-63-018
SECONDARY ELEMENT
70351-38801-103
ELONGATED CUP IN
SECONDARY ELEMENT
UNDAMAGED CUP
(FOR REFERENCE)
00
NOT DAMAGED
INSPECTION CRITERIA FOR SECONDARY ELEMENT, ELONGATED CUP
FIGURE 5
July 01/09  Page 15

### Page 16 (OCR)

(Fold over and tape closed)
SIKORSKY AIRCRAFT CORPORATION
FACSIMILE NUMBER (860) 998-7565
ATTENTION: WCS PRODUCT SAFETY MANAGER
WORLDWIDE CUSTOMER SERVICE
IMPORTANT NOTICE
Upon COMPLIANCE with the attached ASB, Sikorsky requests your cooperation in
completing and returning by mail or FAX this ENTIRE PAGE.
Please fill in the requested information at the bottom of the page, so we may maintain proper
records documenting the configuration of your aircraft. This information is useful when
determining configuration and effectivity of issues affecting fielded aircraft.
This request is in keeping with our policy to assure that our customers receive the latest
information applicable for the maintenance of your aircraft. Thank you.
ALERT SERVICE BULLETIN:  No. 92-63-018  Compliance Record Card
TITLE: _  ROTOR DRIVES - Main Module Assembly - Main Gearbox (MGB) Lube System
Filter Components - One-Time Visual Inspection of Filter Bowl Elements
OWNER/OPERATOR:
SUBMITTED BY:  DATE.
FOLLOWING SERIAL NUMBERS ARE NOT AFFECTED BY THIS ASB
ASB HAS BEEN COMPLIED WITH ON THE FOLLOWING SERIAL NUMBERS
(Fold Up to Arrows)
SA 7673-2 Rev B

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
