# Sikorsky Alert Service Bulletin 92-63-020

Copy: No revision named ("U.S. DOT/FAA - Sikorsky ASB No 92-63-020"), 14 pages: PDF https://openairdocs.org/files/sha256/ea/ab/eaabf805c11ebe61c2ff39cb93bfd39c67fb1a88ed388b8175bb4aea0a478286; text https://openairdocs.org/service-documents/sikorsky/sb-92-63-020/file/eaabf805c11e.md. Rights: © Sikorsky. Filed by the FAA in regulations.gov docket FAA-2010-1136; AD 2010-24-04 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Sikorsky](https://openairdocs.org/service-documents/sikorsky.md)
- Type: Service bulletin (Alert Service Bulletin)
- Number: 92-63-020
- Page: https://openairdocs.org/service-documents/sikorsky/sb-92-63-020

## ADs that cite it (2) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2010-24-04](https://openairdocs.org/ad/2010-24-04.md), effective Dec 6, 2010: No revision named
- [AD 2009-23-51](https://openairdocs.org/ad/2009-23-51.md), effective Feb 19, 2010: No revision named

## Text (14 pages)

Rights: © Sikorsky. Filed by the FAA in regulations.gov docket FAA-2010-1136; AD 2010-24-04 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

Sikorsky Aircraft Corporation
Sikorsky  6900 Main Street
P.O. Box 9729
A United Technologies Company  Stratford, Connecticut 06615-9129
(203) 386-4000
ALERT SERVICE BULLETIN
THIS ALERT SERVICE BULLETIN IS THE PROPERTY OF SIKORSKY AIRCRAFT CORPORATION AND IS PROTECTED UNDER THE COPYRIGHT LAWS OF THE
UNITEO  IS DISTRIBUTED  ONLY TO OWNERS/OPERATORS OF COMMERCIALLY CERTIFIED
SIKORSKY HELICOPTERS AND  SIKORSKY-AUTHORIZED LOGISTIC AND SERVICE CENTERS FOR THE PURPOSE OF  FOSTERING THE SAFE AND EFFICIENT
OPERATION OF SUCH HELICOPTERS AND UNDER THE EXPRESS CONDITION THAT THE CONTENTS OF THIS ALERT SERVICE BULLETIN ARE NOT TO BE
EXPRESS DOCUMENTED CONSENT OF SIKORSKY ANCRAFT CORPORATION. ANY ACT IN VIOLATION OPTEP LICABLE LAW WAY RESULT IN CIVIL ANDIOR
LIMITED DISTRIBUTION & SIKORSKY AIRCRAFT CORPORATION 1999
ALL RIGHTS RESERVED
No. 92-63-020
Subject:  ROTOR DRIVES - Main Module Assembly - Main Gearbox Assembly - One-Time Visual
Inspection of the Mounting Feet Pad, Foot Ribs and to Implement a 10-Hour Recurring
Visual Inspection
1. PLANNING INFORMATION
A. Effectivity
S-92A model helicopters with a main gearbox assembly 92351-15000-042/-043 using main
gearbox housing 92351-15110-042/-043/-044/-045.
B. Purpose
To perform a one-time visual inspection of main gearbox assembly mounting feet pad and
foot ribs for cracks. Also, to implement a new 10-hour recurring visual inspection.
C. Description
Helicopter is prepared for maintenance. Foot pad face, top of pad around bolt bushing,
and all surfaces of each foot rib are visually inspected for cracks. If a crack is suspected
a Fluorescent Penetrant Inspection (FPI) or Dye Penetrant Inspection (alternate) is
performed. If crack is found, replace main gearbox prior to next flight. If no crack is found,
a 10-hour recurring visual inspection is implemented. Helicopter is returned to service.
D. Compliance
Compliance is essential. Sikorsky Aircraft Corporation recommends the one-time visual
inspection be performed within 10 flight-hours from the issue date of this Alert Service
Bulletin (ASB).
A 10-Hour recurring visual inspection is imposed until further notice.
September 11/09  Page 1 of 11  63-20-01

### Page 2 (OCR)

ALERT SERVICE BULLETIN
No. 92-63-020
ROTOR DRIVES - Main Module Assembly - Main Gearbox Assembly - One-Time Visual Inspection of the
Mounting Feet Pad, Foot Ribs and to Implement a 10-Hour Recurring Visual Inspection
1. PLANNING INFORMATION (Continued)
E.  Approval
Inspection item
F.  Manpower (Estimated)
No. of Men  No. of Hours  *Man-Hours
Inspection of Main  2.0  2.0
Gearbox Housing
Mounting Feet
and Foot Ribs for Cracks
*Estimate does not include time required to prepare helicopter or return it to flight status.
G.  Material
None.
H.  Tooling
(1)  18-inch inspection mirror with a two inch diameter glass or larger, (or equivalent).
(2)  Non-metallic pick or probe, (or equivalent).
(3)  Spray bottle, (or equivalent).
(4)  Strong (non-LED, white light) flashlight, (or equivalent).
(5)  Soft bristled brush, (or equivalent).
Weight and Balance
Not affected.
Electrical Load Data
Not changed.
K. Software Load Data
Not applicable.
L.  References
Maintenance Manual SA S92A-AMM-000, Chapter 20-06-00-910-005.
(2)  Maintenance Manual SA S92A-AMM-000, Chapter 20-06-00-910-006.
September 11/09  Page 2  63-20-01

### Page 3 (OCR)

ALERT SERVICE BULLETIN
No. 92-63-020
ROTOR DRIVES - Main Module Assembly - Main Gearbox Assembly - One-Time Visual Inspection of the
Mounting Feet Pad, Foot Ribs and to Implement a 10-Hour Recurring Visual Inspection
1. PLANNING INFORMATION (Continued)
(3)  Maintenance Manual SA S92A-AMM-000, Chapter 54-40-01-900-001.
(4)  Maintenance Manual SA S92A-AMM-000, Chapter 54-40-01-900-002.
(5)  Maintenance Manual SA S92A-AMM-000, Chapter 54-40-01-900-003.
(6)  Maintenance Manual SA S92A-AMM-000, Chapter 54-40-01-900-004.
(7)  Maintenance Manual SA S92A-AMM-000, Chapter 54-40-02-900-001.
(8)  Maintenance Manual SA S92A-AMM-000, Chapter 54-40-02-900-002.
(9)  Maintenance Manual SA S92A-AMM-000, Chapter 63-20-01-900-001 or 63-20-02-900-001.
(10) Structural Repair Manual SA S92A-SRM-000, Chapter 20-10-00.
M. Publications Affected
(1)  Maintenance Manual SA S92A-AWL-000, Temporary Revision No. 5-47, add to the 10-
Hour Inspection Checklist.
(2)  Maintenance Manual SA S92A-AWL-000, Temporary Revision No. 5-48, revises the 50-
Hour Inspection Checklist.
(3)  Maintenance Manual SA S92A-AWL-000, Temporary Revision No. 5-49, revises the 500-
Hour Inspection Checklist.
(4)  Maintenance Manual SA S92A-AMM-000, Chapter 63-20-01. Temporary Revision No. 63-
22 revises the Inspection of Main Gearbox.
N. Attachment
None.
September 11/09  Page 3  63-20-01

### Page 4 (OCR)

ALERT SERVICE BULLETIN
No. 92-63-020
ROTOR DRIVES - Main Module Assembly - Main Gearbox Assembly - One-Time Visual Inspection of the
Mounting Feet Pad, Foot Ribs and to Implement a 10-Hour Recurring Visual Inspection
2. MATERIAL INFORMATION
A.  Basis for Material Data
Per nelicopter.
B.  Bill of Material
None.
C. Consumable Material
WARNING  OBSERVE ALL CAUTIONS AND WARNINGS ON CONTAINERS WHEN
USING CONSUMABLES, WHEN APPLICABLE, WEAR NECESSARY
PROTECTIVE GEAR DURING HANDLING AND USE. IF A
CONSUMABLE IS FLAMMABLE OR EXPLOSIVE, MAKE CERTAIN
CONSUMABLE AND ITS VAPORS ARE KEPT AWAY FROM HEAT,
SPARK, AND FLAME. MAKE CERTAIN FIREFIGHTING EQUIPMENT IS
READILY AVAILABLE PRIOR TO USE. FOR ADDITIONAL
INFORMATION ON TOXICITY, FLASHPOINT, AND FLAMMABILITY OF
CHEMICALS, CONSULT YOUR MEDICAL PEOPLE, OR THE
MANUFACTURER OF THE CONSUMABLE.
INSTRUCTIONS/
QTY  KEY WORD  NOMENCLATURE  DISPOSITION
AS REQ'D  BRULIN CLEANER  SD 1291, OR EQUIVALENT  (1)
AS REQ'D  CLEAN, LOW-LINT CLOTH  A-A-59323, OR EQUIVALENT  (2)
AS REQ'D  CORROSION PREVENTIVE  MIL-DTL-85054, OR  (3)
COMPOUND  EQUIVALENT
AS REQ'D  DYE PENETRANT  ALTERNATE USE TO FPI,  (2)
INSPECTION  OR EQUIVALENT
AS REQ'D  FLUORESCENT PENETRANT  (FPI) KIT, OR EQUIVALENT  (2)
INSPECTION (FPI) KIT
AS REQ'D  SOAP SOLUTION  WATER/SOAP SOLUTION,  (2)
(HALF WATER AND HALF
SOAP)
September 11/09  Page 4  63-20-01

### Page 5 (OCR)

ALERT SERVICE BULLETIN
No. 92-63-020
ROTOR DRIVES - Main Module Assembly - Main Gearbox Assembly - One-Time Visual Inspection of the
Mounting Feet Pad, Foot Ribs and to Implement a 10-Hour Recurring Visual Inspection
2. MATERIAL INFORMATION
(1)  Manufactured by Brulin Corporation, Indianapolis, IN. Telephone Numbers: (317) 923-3211
or 800-776-7149.
(2)  Procure from local supply.
(3)  Manufactured by NS&L, Website: http://www.nationalsealants.com/contact.html.
3. ACCOMPLISHMENT INSTRUCTIONS
A. Perform a one-time visual inspection of main gearbox assembly mounting feet and foot rib for
cracks as follows:
(1)  Prepare helicopter for maintenance.
(2)  Turn off all electrical and hydraulic power.
WARNING  TO PREVENT ELECTRICAL SHOCK OF PERSONNEL, MAKE
SURE TO DEENERGIZE ELECTRICAL POWER.
(3)  Deenergize all electrical power.
WARNING  TO PREVENT INJURY OF PERSONNEL, MAKE SURE TO
DEENERGIZE HYDRAULIC POWER.
(4)  Deenergize all hydraulic power.
(5)  At each mounting foot, apply soap/water solution (half water and half soap) via a spray
bottle, (or equivalent). Using clean, low-lint cloth (or equivalent), wipe dry and remove all
oil, dirt, and debris from each mounting foot.
(6)  Using a strong white light non-LED flashlight (or equivalent), and inspection mirror, (or
equivalent), visually inspect each mount foot for cracks. Inspect the follow areas: Refer to
Figure 1 for definition of areas, and Figure, 2, 3, and 4 for examples of cracks.
(a)  Foot pad face.
(b) Top of pad around bolt bushing.
(C)  All surfaces of each foot rib.
NOTE: Immediately contact Customer Service Engineering at 1-800-WINGED-S or 1-
203-416-4299, to report any crack with the following information: Date
Inspection Performed, Customer/Operator Name, Installed on Helicopter Serial
Number, Main Gearbox Serial Number, Main Gearbox Total Time, Helicopter
Total Time, Location of Crack.
September 11/09  Page 5  63-20-01

### Page 6 (OCR)

ALERT SERVICE BULLETIN
No. 92-63-020
ROTOR DRIVES - Main Module Assembly - Main Gearbox Assembly - One-Time Visual Inspection of the
Mounting Feet Pad, Foot Ribs and to Implement a 10-Hour Recurring Visual Inspection
3. ACCOMPLISHMENT INSTRUCTIONS (Continued)
(a)  If crack is clearly visible, replace main gearbox prior to next flight. Refer to
Maintenance Manual SA S92A-AMM-000, Chapter 63-20-01-900-001 or 63-20-02-900-
001.
(e)  If crack is suspected, perform Fluorescent Penetrant Inspection (FPI). Proceed to
section B.
Visually inspect each mounting foot area for corrosion (bubbled paint) and/or paint
discoloration. Treat corrosion. Refer to Structural Repair Manual SA S92A-SRM-000,
Chapter 20-10-00.
(8)  Return helicopter to service.
B. Fluorescent Penetrant Inspection (FPI):
NOTE:  This follow-on inspection is to be performed only if a crack is suspected.
(1)  Gain direct visual access to suspected area(s) by removing covers, panels, and/or
components as required.
(a)  Remove LH and RH lower covers. Refer to Maintenance Manual SA S92A-AMM-000,
Chapter 54-40-02-900-001.
(b)  Remove center cover. Refer to Maintenance Manual SA S92A-AMM-000, Chapter 54-
40-01-900-001.
(c)  Remove rear cover. Refer to Maintenance Manual SA S92A-AMM-000, Chapter 54-40-
01-900-003.
NOTE:  Do not remove sealant around mounting foot pads and mounting bolt heads
when performing FPI.
(2)  Using clean, low-lint cloth (or equivalent), and Brulin cleaner (or equivalent), clean
suspected area.
(3)  Using a soft bristle brush, (or equivalent) clear any remaining dirt or debris from
inspection areas. If paint is flaked or chipped, use brush bristles or non-metallic pick or
probe (or equivalent) to remove flakes.
(4)  Visually confirm start and stop locations of suspected crack.
NOTE: Dye Penetrant Inspection may be used as an alternate to FPI. Refer to
Maintenance Manual SA S92A-AMM-000, Chapter 20-06-00-910-006.
September 11/09  Page 6  63-20-01

### Page 7 (OCR)

ALERT SERVICE BULLETIN
No. 92-63-020
ROTOR DRIVES - Main Module Assembly - Main Gearbox Assembly - One-Time Visual Inspection of the
Mounting Feet Pad, Foot Ribs and to Implement a 10-Hour Recurring Visual Inspection
3. ACCOMPLISHMENT INSTRUCTIONS (Continued)
Perform FPI of area to confirm direct visual inspection findings. Refer to Maintenance
Manual SA S92A-AMM-000, Chapter 20-06-00-910-005.
NOTE:  Immediately contact Customer Service Engineering at 1-800-WINGED-S or 1-203-
416-4299, to report any crack with the following information: Date Inspection
Performed, Customer/Operator Name, Installed on Helicopter Serial Number, Main
Gearbox Serial Number, Main Gearbox Total Time, Helicopter Total Time,
Location of Crack.
(a) If cracks are confirmed by FPI, replace main gearbox prior to next flight. Refer to
Maintenance Manual SA S92A-AMM-000, Chapter 63-20-01-900-001 or 63-20-02-900-
001.
NOTE: Corrosion Preventive Compound MIL-PRF-16173 may be used as an alternate
to Corrosion Preventive Compound MIL-DTL-85054.
(D)  If cracks are not found apply corrosion preventive compound (MIL-PRF-16173, or
equivalent) to mounting feet.
(6)  Install covers, panels, and/or components previously removed:
(a)  LH and RH lower covers. Refer to Maintenance Manual SA S92A-AMM-000, Chapter
54-40-02-900-002.
(b)  Center cover. Refer to Maintenance Manual SA S92A-AMM-000, Chapter 54-40-01-900-
002.
(c)  Rear cover. Refer to Maintenance Manual SA S92A-AMM-000, Chapter 54-40-01-900-
004.
(7) Make sure area is clean and free of foreign objects.
(8) Return helicopter to service.
C. Record of Compliance
(1) Make an appropriate logbook entry to show compliance with this ASB 92-63-020.
(2)  Upon compliance with this Alert Service Bulletin, complete attached ALERT SERVICE
BULLETIN COMPLIANCE RECORD CARD and return it to Sikorsky Aircraft Corporation.
September 11/09  Page 7  63-20-01

### Page 8 (OCR)

ALERT SERVICE BULLETIN
No. 92-63-020
FOOT RIBS:
FOR THE 92351-15110-042
THERE ARETHREE MAIN
GEARBOX HOUSING RIBS
TO BE INSPECTED.
FOOT PAD FACE  FOOT PAD TOP
(VERTICAL)  (HORIZONTAL)
TYPICAL 4 PLACES
TD1986
MOUNTING FOOT AREA DEFINITION
FIGURE 1
September 11/09  Page 8  63-20-01

### Page 9 (OCR)

ALERT SERVICE BULLETIN
No. 92-63-020
EXAMPLE OF RIGHT
HAND FOOT CRACK
TD 1987
EXAMPLE OF CRACK IN MOUNTING FOOT PAD FACE
FIGURE 2
September 11/09  Page 9  63-20-01

### Page 10 (OCR)

ALERT SERVICE BULLETIN
No. 92-63-020
EXAMPLE OF CRACK IN MOUNTING FOOT
T01988
EXAMPLE OF CRACK IN MOUNTING FOOT PAD TOP
FIGURE 3
September 11/09  Page 10  63-20-01

### Page 11 (OCR)

ALERT SERVICE BULLETIN
No. 92-63-020
EXAMPLE OF FOOT RIB CRACK
TD1989
EXAMPLE OF CRACK IN MOUNTING FOOT PAD RIB
FIGURE 4
September 11/09  Page 11  63-20-01

### Page 12 (OCR)

(Fold over and tape closed)
SIKORSKY AIRCRAFT CORPORATION
FACSIMILE NUMBER (860) 998-7565
ATTENTION: WCS PRODUCT SAFETY MANAGER
WORLDWIDE CUSTOMER SERVICE
IMPORTANT NOTICE
Upon COMPLIANCE with the attached ASB, Sikorsky requests your cooperation in
completing and returning by mail or FAX this ENTIRE PAGE.
Please fill in the requested information at the bottom of the page, so we may maintain proper
records documenting the configuration of your aircraft. This information is useful when
determining configuration and effectivity of issues affecting fielded aircraft.
This request is in keeping with our policy to assure that our customers receive the latest
information applicable for the maintenance of your aircraft. Thank you.
ALERT SERVICE BULLETIN:  No. 92-63-020  Compliance Record Card
TITLE:  ROTOR DRIVES - Main Module Assembly - Main Gearbox Assembly - One-Time
Visual Inspection of the Mounting Feet Pad, Foot Ribs and to Implement a 10-
Hour Recurring Visual Inspection
OWNER/OPERATOR:
SUBMITTED BY:  DATE_
FOLLOWING SERIAL NUMBERS ARE NOT AFFECTED BY THIS ASB
ASB HAS BEEN COMPLIED WITH ON THE FOLLOWING SERIAL NUMBERS
(Fold Up to Arrows)
SA 7673-2 Rev B

### Page 13 (OCR)

Sikorsky
A United Technologies Company  No Postage
Necessary
BUSINESS REPLY MAIL
FIRST-CLASS MAIL PERMIT NO. 432 BRIDGEPORT CT
POSTAGE WILL BE PAID BY ADDRESSEE
SIKORSKY AIRCRAFT CORPORATION
P.O. BOX 9729
6900 MAIN STREET
STRATFORD, CONNECTICUT 06615-9129 U.S.A.
MAILSTOP: K100A
ATTENTION: WCS PRODUCT SAFETY MANAGER
WORLDWIDE CUSTOMER SERVICE
Please complete the form on the reverse side and FAX to
FACSIMILE NUMBER (860) 998-7565
or fold and return ENTIRE form to Sikorsky Aircraft Corporation

### Page 14

(No text on this page.)

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
