# UTC Aerospace Systems Service Bulletin ERPS06M-29-22: Revision 1

- Rights: © UTC Aerospace Systems. Filed by the FAA in regulations.gov docket FAA-2018-0764; AD 2018-23-15 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [UTC Aerospace Systems Service Bulletin ERPS06M-29-22](https://openairdocs.org/service-documents/utc-aerospace-systems/erps06m-29-22.md)
- Title as filed: VSB ERPS06M-29-22 R01
- Pages: 25
- PDF: https://openairdocs.org/files/sha256/a7/1b/a71bfdf3c8f43e109afd2f804c3c531b232029564968dadb8b506846c8f4246b
- Page: https://openairdocs.org/service-documents/utc-aerospace-systems/erps06m-29-22/file/a71bfdf3c8f4

## Text

Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Original Issue Date: Mar 17/17
Revision 1: Jun 27/17
ERPS06M-29-22
Page 1 of 25
 
SERVICE BULLETIN
Hamilton Sundstrand Corporation, a UTC Aerospace Systems Company
EMERGENCY HYDRAULIC POWER - RAM AIR TURBINE MODULE - CHECK/REPLACE PUMP
PROPRIETARY
THIS DOCUMENT IS THE PROPERTY OF UTC AEROSPACE SYSTEMS. YOU MAY NOT POSSESS, USE, COPY OR DISCLOSE THIS 
DOCUMENT OR ANY INFORMATION IN IT, FOR ANY PURPOSE, INCLUDING WITHOUT LIMITATION, TO DESIGN, MANUFACTURE 
OR REPAIR PARTS, OR OBTAIN ANY GOVERNMENT APPROVAL TO DO SO, WITHOUT UTC AEROSPACE SYSTEMS’S EXPRESS 
WRITTEN PERMISSION. NEITHER RECEIPT NOR POSSESSI ON OF THIS DOCUMENT ALONE, FROM ANY SOURCE, 
CONSTITUTES SUCH PERMISSION. POSSESSION, USE, COPYING OR DISCLOSURE BY ANYONE WITHOUT UTC AEROSPACE 
SYSTEMS’S EXPRESS WRITTEN PERMISSION IS NOT AUTHORIZED AND MAY RESULT IN CRIMINAL AND/OR CIVIL LIABILITY. 
U.S. EXPORT CLASSIFICATION: NOT SUBJECT TO REGULATIONS (NSR)
REVISIONS
Revision 1
This revision adds a Parker part number reference to each Hamilton Sundstrand hydraulic pump part 
number throughout the service bulletin. Wording was changed in the Materials Information section to 
indicate that the pump replacement kit is available from Hamilton Sundstrand. A table reference and 
an identification plate reference were also corrected. 
Units previously modified according to this bulletin do not require remodification according to this 
bulletin revision.
This bulletin has been reproduced in its entirety. Discard the bulletin you now have and replace it with 
this copy. The tabulation below is provided for record keeping and traceability of bulletin issues. 
Issue Date
Basic Mar 17/17
Revision 1 Jun 27/17

### Page 2

Original Issue Date: Mar 17/17
Revision 1: Jun 27/17
ERPS06M-29-22
Page 2
SERVICE BULLETIN
Hamilton Sundstrand Corporation, a UTC Aerospace Systems Company
UTC AEROSPACE SYSTEMS PROPRIETARY - Subject to the restriction on the title or cover page.
This document does not contain any export controlled technical data
1. PLANNING INFORMATION
A. Effectivity 
(1) The Hamilton Sundstrand Ram Air Turbine (RAT) Modules, Model ERPS06M, all serial 
numbers that are listed below:
B. Concurrent Requirements
(1) Hamilton Sundstrand Service Bulletins ERPS06M-29-21 (Check/Replace Actuator) 
and ERPS06M-29-19 (Check/Replace Pump) must be incorporated prior to, or in 
conjunction with this bulletin. The RAT module numbers with a concurrent requirement 
are listed below:
C. Reason
(1) RAT modules with the part numbers iden tified above may contain a hydraulic pump 
assembled with nonconforming pistons. These pistons in combination with assembly 
and test operations may result in piston seizure within the cylinder bores and cause 
failure of the pump to provide required pressure. Replacing hydraulic pumps that may 
have been assembled with nonconforming pistons, with one containing updated 
pistons, will reduce the risk of piston seizure in the cylinder bores. Incorporation of this 
bulletin will provide improved reliability of the RAT module.
(2) For RAT modules that do not contain a hydraulic pump that was assembled with 
nonconforming pistons, incorporation of this bulletin (to reidentify the hydraulic pump) 
will let the RAT module advance to a new part number. 
(3) This service bulletin introduces the following new Hamilton Sundstrand part number 
RAT modules. These RAT modules are equipped with the hydraulic pump 
PN 5917648 (Parker PN 4207905) (which has been reidentified), hydraulic pump 
PN 5917649 (Parker PN 4207906) (which has been modified), or hydraulic pump PN 
5916485 (Parker PN 4207903) (which is not affected by this retrofit).
RAT Module Part Number 
1702934E 768084B
770952F 766351B
770379B
RAT Module Part Number 
766351 770379A 770952D 1702934C
766351A 770952 770952E 1702934D
768084 770952A 1702934
768084A 770952B 1702934A
770379 770952C 1702934B

### Page 3

Original Issue Date: Mar 17/17
Revision 1: Jun 27/17
ERPS06M-29-22
Page 3
 
SERVICE BULLETIN
Hamilton Sundstrand Corporation, a UTC Aerospace Systems Company
UTC AEROSPACE SYSTEMS PROPRIETARY - Subject to the restriction on the title or cover page.
This document does not contain any export controlled technical data
D. Description
(1) For hydraulic pump PN 5916430 (Parker PN 4207904), found to be “suspect”, this 
bulletin gives the instructions to replace the hydraulic pump, identify the RAT module, 
and test the RAT module. 
NOTE: “Suspect” refers to hydraulic pumps that need to be replaced because they 
may have been assembled with nonconforming pistons. A list of “suspect” 
hydraulic pump serial numbers can be found in Table 9 of this bulletin.
(2) For hydraulic pump PN 5916430 (Parker PN 4207904), found to be “not suspect”, this 
bulletin gives the instructions to identify the hydraulic pump and the RAT module. 
NOTE: “Not suspect” refers to hydraulic pumps that are not found in Table 9.
(3) For hydraulic pump PN 5916485 (Parker PN 4207903) (which is not affected by this 
retrofit), this bulletin gives instructions to identify the RAT module. 
E. Compliance
(1) Incorporation of this service bulletin is mandatory and should be accomplished at the 
earliest opportunity.
F. Approval
(1) The technical content of this document is approved under the authority of DOA ref. 
EASA.21J.031.
G. Manpower
(1) For hydraulic pump PN 5916430 (Parker PN 4207904), found to be “suspect”, 
approximately 14.0 man-hours are required to replace the hydraulic pump, identify the 
RAT module, and test the RAT module.
(2) For hydraulic pump PN 5916430 (Parker PN 4207904), found to be “not suspect”, 
approximately 1.0 man-hour is required to identify the hydraulic pump and the RAT 
module.
(3) For hydraulic pump PN 5916485 (Parker PN 4207903) (which is not affected by this 
retrofit), approximately 0.5 man-hour is required to identify the RAT module. 
H. Weight and Balance
(1) None
New RAT Module Part Number 
1702934F 768084C
770952G 766351C
770379C

### Page 4

Original Issue Date: Mar 17/17
Revision 1: Jun 27/17
ERPS06M-29-22
Page 4
SERVICE BULLETIN
Hamilton Sundstrand Corporation, a UTC Aerospace Systems Company
UTC AEROSPACE SYSTEMS PROPRIETARY - Subject to the restriction on the title or cover page.
This document does not contain any export controlled technical data
I. Electrical Load Data
(1) Not changed
J. Software Accomplishment Summary
(1) Not Applicable
K. References
(1) Hamilton Sundstrand Component Maintenance Manual (CMM)  29-21-31
(2) Hamilton Sundstrand Standard Practices Manual (SPM) 20-00-00
(3) Applicable Airbus Aircraft Maintenance Ma nual (AMM) and Airbus Illustrated Parts 
Catalog (IPC)
(4) Hamilton Sundstrand Engineering Ch anges 16A240, 16A240A, 16C901 and 16C901A
(5) Parker Hannifin GmbH Component Maintenance Manual (CMM) 29-21-34
(6) Parker Hannifin GmbH Service Bulletin 42079-29-503
(7) Equipment Definition Evolution Sheet (EDES) A334RAT05-008
(8) This service bulletin is subject to airc raft modification N° 206604 D54046 (classified 
major) and is covered by aircraft service bulletin N° A330-29-3130, A340-29-4098.
(9) Under no circumstances shall the modified equipment, resulting from the application of 
this service bulletin, be installed on the aircraft type unless its aircraft service bulletins 
are approved.
L. Other Publications Affected
(1) Hamilton Sundstrand CMM  29-21-31 and Parker Hannifin GmbH CMM 29-21-34 will 
be revised to incorporate this bulletin.
M. Interchangeability or Intermixability of Parts
(1) Refer to the Aircraft Service Bulletin Numbers A330-29-3130  or A340-29-4098 for 
interchangeability or intermixability of parts.

### Page 5

Original Issue Date: Mar 17/17
Revision 1: Jun 27/17
ERPS06M-29-22
Page 5
 
SERVICE BULLETIN
Hamilton Sundstrand Corporation, a UTC Aerospace Systems Company
UTC AEROSPACE SYSTEMS PROPRIETARY - Subject to the restriction on the title or cover page.
This document does not contain any export controlled technical data
2. MATERIAL INFORMATION
A. Material - Price and Availability
(1) In order to agree on a well-organized upgrade process, operators should contact the 
Parker Hannifin GmbH Customer Support Organization in Germany before removing 
a “suspect” hydraulic pump.
(2) The contact information and shipment addr ess for Parker Hannifin GMBH is as follows 
(also refer to Parker Hannifin GMBH Service Bulletin 42079-29-503): 

NOTE: All e-mail messages should be sent to both contact people listed below:

Contact 1: 
Andreas Flach, Customer Service Administrator
E-mail: andreas.flach@parker.com
Telephone: +49 6134 204 110
Fax: +49 6134 204 188

Contact 2: 
Tim Verschoof, Junior Business Development Manager
E-mail: tim.verschoof@parker.com
Telephone: +49 6134 204 184
Fax: +49 6134 204 188 

Shipment Address:
Parker Hannifin GmbH
Service Center Wiesbaden
Lorenz-Schott-Strasse 9
D-55252 Mainz-Kastel
Germany
(3) For hydraulic pump PN 5916430 (Parker PN 4207904), found to be “suspect”, a limited 
number of hydraulic pumps will be placed in a rotable pool for operator use. These will 
be available to operators for exchange, based upon availability. In addition, the A330/
A340 RAT pump replacement parts kit 914-157 (refer to Table 3 of this bulletin) is 
available from Hamilton Sundstrand Commercial Spares.

Requests for rotable units should be sent (along with fleet data) in an e-mail message 
to Hamilton Sundstrand Retrofit Management as follows: 

To: Stephen Carew (stephen.carew@utas.utc.com) 
Subject: SB ERPS06M-29-22 Check/Replace Pump

### Page 6

Original Issue Date: Mar 17/17
Revision 1: Jun 27/17
ERPS06M-29-22
Page 6
SERVICE BULLETIN
Hamilton Sundstrand Corporation, a UTC Aerospace Systems Company
UTC AEROSPACE SYSTEMS PROPRIETARY - Subject to the restriction on the title or cover page.
This document does not contain any export controlled technical data
(4) For hydraulic pump, 5916430 (Parker PN 4207904), found to be “not suspect”, the 
hydraulic pump temporary identification plate (refer to Table 1 and Table 4 of this 
bulletin) will be supplied by Parker Hannifin GmbH. Operators should place a “no-
charge” purchase order to Parker Hannifin GmbH, that includes sufficient quantities of 
temporary identification plates for their entire fleet (with the understanding that not all 
of the temporary identification plates may be required). 
(5) Hamilton Sundstrand will suppl y the replacement parts required for accomplishment of 
this bulletin on a no-charge basis to operators and customer designees. The 
replacement parts are currently available in limited quantities (refer to Table 3 of this 
bulletin for the parts breakdown). Operators and customer designees may place a 
single “no-charge” order to Hamilton Sundstrand. These orders should be forwarded 
to the assigned Hamilton Sundstrand Commercial Spares Administrator (or fax to +1-
860-660-7557, if the responsible Administrator is not known). In addition, the Hamilton 
Sundstrand website at www.customers.utcaerospacesystems.com can be used to 
contact the Commercial Spares group. Upon entering the website, select “Customer 
Service” followed by “Spare Parts” for other contact and order processing options that 
are available. Orders must clearly reference fleet requirements; noting the service 
bulletin number, serial numbers of affected units, total quantity of parts, and anticipated 
incorporation schedule. Hamilton Sundstrand will acknowledge the order with an 
established delivery rate.
(a) The two methods used to determine order quantities, based on available fleet 
records, are listed below. In each case, Hamilton Sundstrand will acknowledge 
the operator order with an established delivery rate.
1 For operators who can establish a listing of affected units in their fleet 
through the review of records, Hamilton Sundstrand requests that a single 
purchase order be submitted for the total parts requirement. To minimize 
processing delays, orders must clearly reference the service bulletin 
number, serial numbers of affected units, total quantity of parts, and 
anticipated incorporation schedule. [To calculate the total quantity of parts to 
order, refer to Table 1, Table 3, Table 4, or Table 6 of this bulletin for the 
parts breakdown on a per unit basis.]

If an operator finds that additional quantities of parts are required, they 
should contact Hamilton Sundstrand with the details so that arrangements 
can be made to supply them with the additional quantities.

### Page 7

Original Issue Date: Mar 17/17
Revision 1: Jun 27/17
ERPS06M-29-22
Page 7
 
SERVICE BULLETIN
Hamilton Sundstrand Corporation, a UTC Aerospace Systems Company
UTC AEROSPACE SYSTEMS PROPRIETARY - Subject to the restriction on the title or cover page.
This document does not contain any export controlled technical data
2 For operators who cannot establish the total fleet requirements through the 
review of records, Hamilton Sundstrand requests that an initial purchase 
order be submitted to support 25 percent of their operating fleet or two 
aircraft, whichever is greater. This will allow an operator to have parts 
available on shelf in the event that an affected unit is found while performing 
inspections in accordance with this service bulletin. To minimize processing 
delays, orders must clearly reference the service bulletin number and 
quantity of parts. [To calculate the total quantity of parts to order, refer to 
Table 1, Table 3, Table 4, or Table 6 of this bulletin for the parts breakdown 
on a per unit basis.]

If the initial quantity of parts is used and aircraft remain to be inspected, 
operators should contact Hamilton Sundstrand with the details so that 
arrangements can be made to supply additional parts.
B. Industry Support Information
(1) For hydraulic pump PN 5916430 (Parker PN 4207904), found to be "suspect":
(a) Hamilton Sundstrand will give a maximum labor allowance of 14.0 man-hours 
multiplied by the operator's current approved hourly rate for replacement of the 
pump on the aircraft and for on-wing testing.
(2) For hydraulic pump PN 5916430 (Parker PN 4207904), found to be "not suspect": 
(a) Hamilton Sundstrand will also give a maximum labor allowance of 1.0 man-hour 
multiplied by the operator's current approved hourly rate for accomplishment of 
this bulletin.
(3) For hydraulic pump PN 5916485 (Parker PN 4207903): 
(a) Hamilton Sundstrand will also give a maximum labor allowance of 0.5 man-hour 
multiplied by the operator's current approved hourly rate for accomplishment of 
this bulletin.
(4) Operators should forward a claim for labor reimbursement to 
warrantyclaims@utas.utc.com or to Warranty Administration, 4747 Harrison Ave., 
Rockford, IL 61108-7929, USA, MS 218-6. The claim should reference the service 
bulletin number, serial numbers modified, date modified, total hours, and approved 
labor rate.
(5) Hamilton Sundstrand will incorporate this mo dification into returned units at no charge. 
Operators should contact their applicable UTC Aerospace Systems Repair Facility for 
scheduling information. For the repair facility contact information, operators should use 
the Hamilton Sundstrand website at www.utcaerospacesystems.com. (Upon entering 
the website, select “Customer Service” followed by “Repair Services”. Click on the link 
to search for the UTC Aerospace Systems Repair Facility that can repair your part. You 
will be able to search based on the part number.)

### Page 8

Original Issue Date: Mar 17/17
Revision 1: Jun 27/17
ERPS06M-29-22
Page 8
SERVICE BULLETIN
Hamilton Sundstrand Corporation, a UTC Aerospace Systems Company
UTC AEROSPACE SYSTEMS PROPRIETARY - Subject to the restriction on the title or cover page.
This document does not contain any export controlled technical data
C. Material Necessary For Each Unit
(1) Refer to Hamilton Sundstrand CMM  29-21-31 for expendable parts information and 
consumable materials.
(2) Material to be Purchased 
Table 1
Table 1 Note 1: Parker Hannifin GmbH will suppl y the noted part at no charge (refer to paragraph 
2.A.(4) of this bulletin for details). 
Table 2
Table 1
New Parts Required [On the Aircraft, Non-Suspect Hydraulic Pump, 
PN 5916430 (Parker PN 4207904)]
New 
Part Number Keyword
Old 
Part Number Qty
Unit 
Price
Special Instructions/
Disposition
48683 (Parker PN) Temporary 
Identification 
Plate
None 1 (Note 1) If the hydraulic 
pump is not suspect, 
install new
Table 2
New Material Required [On the Aircraft, Non-Suspect Hydraulic Pump, 
PN 5916430 (Parker PN 4207904)] 
Material Name and Number Source Use
Lockwire, MS20995C32
(or equivalent)
Commercially Available If the hydraulic pump is not 
suspect, use to install the 
hydraulic pump temporary 
identification plate

### Page 9

Original Issue Date: Mar 17/17
Revision 1: Jun 27/17
ERPS06M-29-22
Page 9
 
SERVICE BULLETIN
Hamilton Sundstrand Corporation, a UTC Aerospace Systems Company
UTC AEROSPACE SYSTEMS PROPRIETARY - Subject to the restriction on the title or cover page.
This document does not contain any export controlled technical data
Table 3
Table 3 Note 1: The noted parts are contained in the A330/A340 RAT pump replacement parts kit 
914-157 (refer to paragraph 2.A.(3) of this bulletin for details).
Table 3 Note 2: A limited number of hydraulic pumps will be provided in a rotable pool for operator 
use (refer to paragraph 2.A.(3) for details). 
Table 3
New Parts Required [On the Aircraft, Suspect Hydraulic Pump, 
PN 5916430 (Parker PN 4207904)] 
New 
Part Number Keyword
Old 
Part Number Qty Unit Price
Special 
Instructions/
Disposition
5917649
(Parker PN 4207906)
Hydraulic 
Pump
5916430
(Parker PN 4207904)
1 (Note 2) If suspect, 
remove old, 
install new
Same O-Ring NAS1612-20 2 (Note 1) If installed, 
remove old, 
install new
Same Backup Ring MS28774-023 4 (Note 1) Remove old, 
install new
Same O-Ring NAS1611-023 2 (Note 1) Remove old, 
install new
Same Backup Ring MS28774-021 4 (Note 1) Remove old, 
install new
Same O-Ring NAS1611-021 2 (Note 1) Remove old, 
install new
Same Backup Ring MS28774-014 4 (Note 1) Remove old, 
install new
Same O-Ring NAS1611-014 2 (Note 1) Remove old, 
install new
Same O-Ring NAS1611-042 1 (Note 1) Remove old, 
install new
5912160 Radial Seal 5912160
5910299
1 (Note 1) Remove old, 
install new
914-157 A330/A340 
RAT Pump 
Replacement 
Parts Kit
None 1 (Note 1) Install new

### Page 10

Original Issue Date: Mar 17/17
Revision 1: Jun 27/17
ERPS06M-29-22
Page 10
SERVICE BULLETIN
Hamilton Sundstrand Corporation, a UTC Aerospace Systems Company
UTC AEROSPACE SYSTEMS PROPRIETARY - Subject to the restriction on the title or cover page.
This document does not contain any export controlled technical data
Table 4
Table 4 Note 1: Parker Hannifin GmbH will suppl y the noted part at no charge (refer to paragraph 
2.A.(4) of this bulletin for details). 
Table 4 Note 2: The noted modification plate and identification plates are only required if the RAT 
module is in the shop. 
Table 4 Note 3: Hamilton Sundstr and will supply or install the noted parts at no charge (refer to 
paragraph 2.A.(5) of this bulletin for details). 
Table 4
New Parts Required [In the Shop, Non-Suspect Hydraulic Pump, 
PN 5916430 (Parker PN 4207904)] 
New 
Part Number Keyword
Old 
Part Number Qty Unit Price
Special 
Instructions/
Disposition
 48683 (Parker PN) Temporary 
Identification 
Plate
None 1 (Note 1) If the hydraulic 
pump is not 
suspect, install 
new
Same
(Note 2)
Modification 
Plate
761251 1 (Note 3) Remove old 
and install new 
1700217-17
(Note 2)
Identification 
Plate
1700217-14 1 (Note 3) Remove old 
and install new 
(for RAT 
module 
PN 770379B) 
1700217-18
(Note 2)
Identification 
Plate
1700217-15 1 (Note 3) Remove old 
and install new 
(for RAT 
module 
PN 770952F) 
1700217-19
(Note 2)
Identification 
Plate
1700217-16 1 (Note 3) Remove old 
and install new 
(for RAT 
module 
PN 1702934E) 
Same
(Note 2)
Identification 
Plate
755595 1 (Note 3) Remove old 
and install new 
(for RAT 
modules 
PN 768084B 
and 766351B)

### Page 11

Original Issue Date: Mar 17/17
Revision 1: Jun 27/17
ERPS06M-29-22
Page 11
 
SERVICE BULLETIN
Hamilton Sundstrand Corporation, a UTC Aerospace Systems Company
UTC AEROSPACE SYSTEMS PROPRIETARY - Subject to the restriction on the title or cover page.
This document does not contain any export controlled technical data
Table 5
Table 5
New Material Required [In the Shop, Non-Suspect Hydraulic Pump, 
PN 5916430 (Parker PN 4207904)]
Material Name and Number Source Use
Lockwire, MS20995C32
(or equivalent)
Commercially Available If the hydraulic pump is not 
suspect, use to install the 
hydraulic pump temporary 
identification plate

### Page 12

Original Issue Date: Mar 17/17
Revision 1: Jun 27/17
ERPS06M-29-22
Page 12
SERVICE BULLETIN
Hamilton Sundstrand Corporation, a UTC Aerospace Systems Company
UTC AEROSPACE SYSTEMS PROPRIETARY - Subject to the restriction on the title or cover page.
This document does not contain any export controlled technical data
Table 6
Table 6
New Parts Required (In the Shop, Suspect Hydraulic Pump) 
New 
Part Number Keyword
Old 
Part Number Qty
Unit 
Price
Special 
Instructions/
Disposition
5917649
(Parker PN 4207906)
Hydraulic 
Pump
5916430
(Parker PN 4207904)
1 (Note 1) If suspect, 
remove old, 
install new
Same O-Ring NAS1612-20 2 (Note 1) If installed, 
remove old, 
install new
Same Backup Ring MS28774-023 4 (Note 1) Remove old, 
install new
Same O-Ring NAS1611-023 2 (Note 1) Remove old, 
install new
Same Backup Ring MS28774-021 4 (Note 1) Remove old, 
install new
Same O-Ring NAS1611-021 2 (Note 1) Remove old, 
install new
Same Backup Ring MS28774-014 4 (Note 1) Remove old, 
install new
Same O-Ring NAS1611-014 2 (Note 1) Remove old, 
install new
Same O-Ring NAS1611-042 1 (Note 1) Remove old, 
install new
Same Radial Seal 5912160 1 (Note 1) Remove old, 
install new
Same
(Note 2)
Modification 
Plate
761251 1 (Note 1) Remove old 
and install new 
1700217-17
(Note 2)
Identification 
Plate
1700217-14 1 (Note 1) Remove old 
and install new 
(for RAT 
module 
PN 770379B) 
1700217-18
(Note 2)
Identification 
Plate
1700217-15 1 (Note 1) Remove old 
and install new 
(for RAT 
module 
PN 770952F)

### Page 13

Original Issue Date: Mar 17/17
Revision 1: Jun 27/17
ERPS06M-29-22
Page 13
 
SERVICE BULLETIN
Hamilton Sundstrand Corporation, a UTC Aerospace Systems Company
UTC AEROSPACE SYSTEMS PROPRIETARY - Subject to the restriction on the title or cover page.
This document does not contain any export controlled technical data
Table 6 Note 1: Hamilton Sundstr and will supply or install the noted parts at no charge (refer to 
paragraph 2.A.(5) of this bulletin for details). 
Table 6 Note 2: The noted modification plate and identification plates are only required if the RAT 
module is in the shop. 
(3) Material Supplied by the Operator
(a) None
D. Material Necessary For Each Spare
(1) The same as the material necessary for each unit.
E. Reidentified Parts
(1) If the hydraulic pump, PN 5916430 (Parker PN 4207904) is “not suspect” (refer to 
Table 9 of this bulletin), it should be reidentified (refer to Table 7): 
(2) If the hydraulic pump is PN 5916485 (Parker PN 4207903), continue to step 2.E. (3).
Table 7
(3) Incorporation of this bulletin advances the RAT module part number as shown in 
Table 8 of this bulletin [refer to paragraph 3.F. (On the Aircraft) or paragraph 3.G. (In 
the Shop) of this bulletin for RAT module identification]. 
1700217-19
(Note 2)
Identification 
Plate
1700217-16 1 (Note 1) Remove old 
and install new 
(for RAT 
module 
PN 1702934E) 
Same
(Note 2)
Identification 
Plate
755595 1 (Note 1) Remove old 
and install new 
(for RAT 
modules 
PN 768084B 
and 766351B) 
Table 7
Reidentified Parts 
Old Part Number Keyword New Part Number
5916430
(Parker PN 4207904) 
Hydraulic Pump 5917648
(Parker PN 4207905)
Table 6
New Parts Required (In the Shop, Suspect Hydraulic Pump) (Continued)
New 
Part Number Keyword
Old 
Part Number Qty
Unit 
Price
Special 
Instructions/
Disposition

### Page 14

Original Issue Date: Mar 17/17
Revision 1: Jun 27/17
ERPS06M-29-22
Page 14
SERVICE BULLETIN
Hamilton Sundstrand Corporation, a UTC Aerospace Systems Company
UTC AEROSPACE SYSTEMS PROPRIETARY - Subject to the restriction on the title or cover page.
This document does not contain any export controlled technical data
Table 8
F. Tooling - Price and Availability
(1) No tooling other than that required for shop maintenance of the RAT module is required 
to do this modification.
G. Special Tooling Necessary to do this Service Bulletin
(1) No special tooling or equipment are required to do this modification. But, the 
maintenance and overhaul tools in the manuals listed in paragraph 1.K. References 
can be necessary. Examine the operator tool supply to make sure all necessary tools 
are available.
Table 8
Rat Module Part Number Changes 
From To
1702934E 1702934F
770952F 770952G
770379B 770379C
768084B 768084C
766351B 766351C

### Page 15

Original Issue Date: Mar 17/17
Revision 1: Jun 27/17
ERPS06M-29-22
Page 15
 
SERVICE BULLETIN
Hamilton Sundstrand Corporation, a UTC Aerospace Systems Company
UTC AEROSPACE SYSTEMS PROPRIETARY - Subject to the restriction on the title or cover page.
This document does not contain any export controlled technical data
3. ACCOMPLISHMENT INSTRUCTIONS
A. General
CAUTION: THE RAT MODULE CONTAINS DESIGN CRITICAL CHARACTERISTICS, 
PROCESSES, AND PROCEDURES. THE DESIGN CRITICAL 
CHARACTERISTICS ARE IDENTIFIED WITH THE SYMBOL >>DCC<<. 
REFER TO THE INTRODUCTION SECTION OF HAMILTON SUNDSTRAND 
CMM 29-21-31 FOR A COMPLETE EXPLANATION OF DESIGN CRITICAL 
CHARACTERISTICS.
(1) The facility performing the work (user) s hould obtain the material safety data sheets 
[Occupational Safety and Health Act (OSHA) Form 20 or equivalent] from the 
manufacturers or suppliers of materials to be used. The user must become completely 
familiar with the manufacturer/supplier information and adhere to the procedures, 
recommendations, warnings, and cautions of the manufacturer/supplier for the safe 
use, handling, storage, and disposal of these materials. The user should also read the 
long version of the warnings contained in this bulletin. The long version warnings are 
contained in Hamilton Sundstrand Warnings Registry SPM 20-00-04 available free of 
charge to all organizations that are on distribution for this bulletin. The Warnings 
Registry SPM 20-00-04 is also available at myhs.hamiltonsundstrand.com.
(2) A unit modified according to this servic e bulletin might be returned to the shop for 
maintenance or repair before the new or modified part numbers or procedures in this 
bulletin are incorporated into the applicable CMM.

Until this service bulletin is incorporated into the CMM, the operator's authorized repair 
shops are allowed to disassemble, clean, check, repair, assemble, and test the unit 
according to the applicable CMM, using the new or modified part numbers or 
procedures in this bulletin.

After this service bulletin is incorporated into the CMM, the CMM procedures will 
supersede this bulletin.
B. Check
(1) Do a check for “suspect” hydraulic pump (280B, IPL Figure 1, CMM  29-21-31) or 
(240B, IPL Figure 1A) as follows: 
(a) Review the list of “suspect” hydr aulic pump serial numbers shown in Table 9 of 
this bulletin (refer to Figure 1 of this bulletin for the location of the Parker Hannifin 
GmbH identification plate on the hydraulic pump).

### Page 16

Original Issue Date: Mar 17/17
Revision 1: Jun 27/17
ERPS06M-29-22
Page 16
SERVICE BULLETIN
Hamilton Sundstrand Corporation, a UTC Aerospace Systems Company
UTC AEROSPACE SYSTEMS PROPRIETARY - Subject to the restriction on the title or cover page.
This document does not contain any export controlled technical data
Table 9
(b) If the hydraulic pump is PN 5916485 (Parker PN 4207903), continue to 
paragraph 3.F. (Identification - On the Aircraft) or paragraph 3.G. (Identification - 
In the Shop) of this bulletin.
(c) Review Table 10 for a list of RAT module serial numbers and corresponding 
“suspect” pump serial numbers.
NOTE: Table 10 is a reference table to be used to help the operator find RAT 
modules that have a “suspect” pump installed. The table does not 
contain all RAT module serial numbers that may have a “suspect” pump 
installed. Table 10 is included as a guide only.
Table 10
Table 9
Suspect Hydraulic Pump Serial Numbers 
BU 997 CE 935 DD 50 DZ 68 EM 589 EM 590 EM 591 EM 592 EM 593 EM 594
EM 595 EM 596 EM 597 EM 598 EM 599 EM 600 EM 783 EM 784 EM 785 EM 786
EM 787 EM 788 EM 789 EN 840 EN 841 EN 842 EN 843 EN 844 EN 845 EN 846
EP 338 EP 339 EP 340 EP 341 EP 342 EP 343 EP 344 EP 345 EP 346 EP 347
EP 963 EP 964 EP 965 EP 966 EP 967 EP 968 EP 969 EP 970 EP 971 EP 972
ER 276 ER 277 ER 278 ER 279 ER 280 ER 281 ER 282 ER 283 ER 284 ER 285
ER 286 ET 643 ET 644 ET 645 ET 646 ET 647 ET 648 ET 649 ET 650 EU 193
EU 194 EU 195 EU 196 EU 197 EU 198 EU 199 EU 200 EU 201 EU 202 EU 203
EU 204 EU 205 EU 206 EU 945 EU 946 EU 947 EU 948 EU 949 EU 950 EU 951
EU 952 EU 953 EU 954 FA 778 FA 780 FA 781 FA 782 FA 783 FA 784 FA 785
FA 786 FA 787 FA 788 FA 789 FB 402 FB 403 FB 404 FB 405 FB 406 FB 407
FB 408 FB 409 FB 410 FB 411 FC 874 FC 875 FC 876 FC 877 FC 878 FC 879
FT 92 GT 52 HG 89 IG 61 JB 95 LL 26
Table 10
RAT Module and Suspect Pump Serial Numbers
RAT Module
Serial Number
Suspect Pump 
Serial Number
RAT Module
Serial Number
Suspect Pump 
Serial Number
0129 LL 26 1088 FT 92
0212 JB 95 AADW001543 EM 589
0215 IG 61 AADW001544 EM 593
0220 DZ 68 AADW001545 EM 590
0229 HG 89 AADW001546 EM 591

### Page 17

Original Issue Date: Mar 17/17
Revision 1: Jun 27/17
ERPS06M-29-22
Page 17
 
SERVICE BULLETIN
Hamilton Sundstrand Corporation, a UTC Aerospace Systems Company
UTC AEROSPACE SYSTEMS PROPRIETARY - Subject to the restriction on the title or cover page.
This document does not contain any export controlled technical data
AADW001547 EM 594 AADW001575 EP 347
AADW001549 EM 592 AADW001577 EP 963
AADW001551 EP 339 AADW001579 EN 844
AADW001552 EM 786 AADW001580 EP 965
AADW001553 EM 596 AADW001581 EP 967
AADW001554 EM 600 AADW001582 EP 966
AADW001555 EM 783 AADW001583 EP 969
AADW001556 EM 595 AADW001584 EP 964
AADW001557 EM 785 AADW001585 EP 970
AADW001558 EM 784 AADW001586 EP 342
AADW001559 EP 341 AADW001587 ER 282
AADW001560 EM 789 AADW001588 ER 281
AADW001561 EP 343 AADW001589 ER 284
AADW001563 EM 598 AADW001590 ER 279
AADW001564 EM 597 AADW001591 ER 283
AADW001565 EP 338 AADW001592 ER 280
AADW001566 EP 344 AADW001593 ER 286
AADW001567 EP 345 AADW001594 ER 285
AADW001568 EP 340 AADW001595 EP 971
AADW001569 EN 841 AADW001596 ET 644
AADW001570 EN 840 AADW001597 ET 650
AADW001571 EN 843 AADW001598 ET 647
AADW001572 EN 842 AADW001600 EU 193
AADW001573 EP 346 AADW001601 ET 645
AADW001574 EM 599 AADW001602 ET 649
Table 10
RAT Module and Suspect Pump Serial Numbers
RAT Module
Serial Number
Suspect Pump 
Serial Number
RAT Module
Serial Number
Suspect Pump 
Serial Number

### Page 18

Original Issue Date: Mar 17/17
Revision 1: Jun 27/17
ERPS06M-29-22
Page 18
SERVICE BULLETIN
Hamilton Sundstrand Corporation, a UTC Aerospace Systems Company
UTC AEROSPACE SYSTEMS PROPRIETARY - Subject to the restriction on the title or cover page.
This document does not contain any export controlled technical data
AADW001603 EU 194 AADW001628 FA 778
AADW001604 EU 198 AADW001629 FA 782
AADW001605 EU 197 AADW001630 FA 780
AADW001606 EU 201 AADW001631 EU 196
AADW001607 EU 202 AADW001632 FA 784
AADW001609 EU 203 AADW001633 FA 787
AADW001610 EU 199 AADW001634 FA 785
AADW001611 EU 204 AADW001635 FA 786
AADW001612 EP 968 AADW001636 FA 789
AADW001613 EU 205 AADW001637 FB 405
AADW001614 ET 646 AADW001638 EU 200
AADW001615 EU 945 AADW001639 FB 404
AADW001616 EU 946 AADW001640 FB 409
AADW001617 EU 947 AADW001641 FC 874
AADW001618 EU 206 AADW001642 FB 410 
AADW001619 EU 954 AADW001643 FB 408
AADW001620 EP 972 AADW001644 FC 876
AADW001621 ET 648 AADW001645 FC 878
AADW001622 EU 952 AADW001646 FC 875
AADW001623 EU 950 AADW001647 EU 948
AADW001624 EU 949 AADW001673 FB 411
AADW001625 FA 788
AADW001626 EU 953
AADW001627 FA 783
Table 10
RAT Module and Suspect Pump Serial Numbers
RAT Module
Serial Number
Suspect Pump 
Serial Number
RAT Module
Serial Number
Suspect Pump 
Serial Number

### Page 19

Original Issue Date: Mar 17/17
Revision 1: Jun 27/17
ERPS06M-29-22
Page 19
 
SERVICE BULLETIN
Hamilton Sundstrand Corporation, a UTC Aerospace Systems Company
UTC AEROSPACE SYSTEMS PROPRIETARY - Subject to the restriction on the title or cover page.
This document does not contain any export controlled technical data
(d) If the hydraulic pump is PN 5916430 (Parker PN 4207904), and is identified by 
the serial number (refer to Table 9 and Table 10) as “suspect”, do the following:
1 Replace the hydraulic pump (continue to paragraph 3.C. of this bulletin).
2 Send the “suspect” pump to Parker Hannifin GmbH [refer to paragraph 
2.A.(2) of this bulletin for the contact information and shipment address]. 
(e) If the hydraulic pump, PN 5916430 (Parker PN 4207904) is identified by the serial 
number as “not suspect” (refer to Table 9 and Table 10), do the following steps:
1 On the hydraulic pump identification plate, use a permanent writing method 
to completely obliterate the existing Hamilton Sundstrand PN 5916430 and 
the Parker PN 4207904.
2 Use new lockwire (PN MS20995C32 or equivalent) to attach a new 
temporary identification plate (Parker PN 48683) to the hydraulic pump as 
follows: 
NOTE: The hydraulic pump advances to Hamilton Sundstrand PN 
5917648 and Parker PN 4207905. 
CAUTION: THE EXISTING HYDRAULIC PUMP LOCKWIRE SHOULD 
NOT BE REMOVED. IT SECURES AN ADJUSTING SCREW. 
REMOVAL OF THIS EXISTING LOCKWIRE COULD LET A 
CRITICAL PUMP SETTING BE CHANGED. 
a Do not remove the existing hydraulic pump lockwire. 
WARNING: THE FORCE MADE WHEN LOCKWIRE (ALSO KNOWN AS 
SAFETY WIRE) IS TWISTED OR CUT CAN CAUSE THE 
LOCKWIRE TO BECOME A PROJECTILE. THE FORCE CAN 
CAUSE THE LOCKWIRE TO DAMAGE OR GO THROUGH 
THE SURFACE OF YOUR EYES. THIS DAMAGE COULD 
CAUSE PERMANENT BLINDNESS IN THE EFFECTED EYE. 
BEFORE YOU REMOVE OR INSTALL THE LOCKWIRE, PUT 
ON SAFETY GLASSES WITH SIDE-SHIELDS OR SAFETY 
GOGGLES. IF THE LOCKWIRE GETS INTO YOUR EYE, GET 
IMMEDIATE MEDICAL AID. IF THE LOCKWIRE HAS GONE 
THROUGH THE SURFACE OF THE EYE, DO NOT TRY TO 
REMOVE THE LOCKWIRE. MAKE SURE THAT A TRAINED 
MEDICAL PERSON REMOVES THE LOCKWIRE.
b Use lockwire to attach a new temporary hydraulic pump identification 
plate (Parker PN 48683) (refer to Figure 1 of this bulletin).
1) Put approximately 18 to 20 inches (457 to 508 millimeters) of new 
lockwire (PN MS20995C32 or equivalent) through the grommets 
of the new temporary identification plate (Parker PN 48683).
2) Put the new temporary identification plate (Parker PN 48683) 
adjacent to the existing hydraulic pump identification plate.

### Page 20

Original Issue Date: Mar 17/17
Revision 1: Jun 27/17
ERPS06M-29-22
Page 20
SERVICE BULLETIN
Hamilton Sundstrand Corporation, a UTC Aerospace Systems Company
UTC AEROSPACE SYSTEMS PROPRIETARY - Subject to the restriction on the title or cover page.
This document does not contain any export controlled technical data
3) Use a single-wire method to wrap the lockwire around the 
hydraulic pump housing (adjacent to flange). 
4) Put the lockwire pigtail at the bottom of the hydraulic pump for 
accessibility.
3 Continue to paragraph 3.F. (Identification - On the Aircraft) or 
paragraph 3.G. (Identification - In the Shop) of this bulletin. 
C. Disassembly 
(1) Disassemble the RAT module as necessary to remove the hydraulic pump (280B, 
IPL Figure 1) or (240B, IPL Figure 1A) (refer to CMM 29-21-31, DISASSEMBLY). 
Discard the parts that follow:
- O-ring (110, IPL Figure 1) (if installed)
- Backup ring (180, IPL Figure 1) or (160, IPL Figure 1A)
- O-ring (190A, IPL Figure 1) or (170, IPL Figure 1A)
- Backup ring (210, IPL Figure 1) or (190, IPL Figure 1A)
- O-ring (220A, IPL Figure 1) or (200, IPL Figure 1A)
- Backup Ring (240, IPL Figure 1) or (220, IPL Figure 1A)
- O-ring (250A, IPL Figure 1) or (230, IPL Figure 1A)
- Radial seal (323 or 323A, IPL Figure 1) or (340, IPL Figure 1A)
- O-ring (324A, IPL Figure 1) or (320, IPL Figure 1A)
D. Assembly
(1) Use the hydraulic pump PN 5917649 (Parker PN 4207906) and the following new parts 
to assemble the RAT module (refer to CMM 29-21-31, ASSEMBLY): 
- O-ring (324A, IPL Figure 1) or (320, IPL Figure 1A)
- Radial seal (323A, IPL Figure 1) or (340, IPL Figure 1A)
- O-ring (250A, IPL Figure 1) or (230, IPL Figure 1A)
- Backup Ring (240, IPL Figure 1) or (220, IPL Figure 1A)
- O-ring (220A, IPL Figure 1) or (200, IPL Figure 1A)
- Backup ring (210, IPL Figure 1) or (190, IPL Figure 1A)
- O-ring (190A, IPL Figure 1) or (170, IPL Figure 1A)
- Backup ring (180, IPL Figure 1) or (160, IPL Figure 1A)
- O-ring (110, IPL Figure 1) (if removed)
E. Test
(1) If the RAT module is in the shop and the hydraulic pump has been replaced, do a test 
of the RAT module (refer to CMM 29-21-31, TESTING AND FAULT ISOLATION). 
(2) If the RAT module is on the aircraft and  the hydraulic pump has been replaced, do a 
functional test of the RAT (refer to the applicable Airbus AMM).

### Page 21

Original Issue Date: Mar 17/17
Revision 1: Jun 27/17
ERPS06M-29-22
Page 21
 
SERVICE BULLETIN
Hamilton Sundstrand Corporation, a UTC Aerospace Systems Company
UTC AEROSPACE SYSTEMS PROPRIETARY - Subject to the restriction on the title or cover page.
This document does not contain any export controlled technical data
(3) If the RAT module is on the aircraft, and the RAT hydraulic pump has been reidentified 
on the aircraft, no test is necessary.
F. Identification (On the Aircraft)
NOTE: Replacement of the RAT module identification plate and modification plate 
on the aircraft should be avoided. If an identification plate or modification 
plate is not installed correctly (refer to CMM 29-21-31, ASSEMBLY), it can 
come loose. This can result in a missing identification plate or modification 
plate. 
NOTE: If the RAT module identification plate or modification plate is missing, 
operators should contact Hamilton Sundstrand [refer to paragraph 2.A.(2)] 
for a replacement part. 
NOTE: If additional information is required to write on the RAT module identification 
or modification plate, operators should contact the following Hamilton 
Sundstrand Service Engineer:

Greg Kuczek
Phone: +1-815-226-6581
Fax: +1-860-660-4995
E-Mail: gregory.kuczek@utas.utc.com
(1) If the RAT module is on the aircraft, identify the RAT module as follows:
(a) Use a ball point pen (or an equivalent permanent writing method) to change the 
RAT module part number on the RAT module identification plate as shown in 
Table 11 of this bulletin. (Refer to Figure 2 of this bulletin for the location of the 
RAT module identification plate.)
Table 11
(b) Use a ball point pen (or an equivalent permanent writing method) to write an X 
through Mod Dot 22 on the RAT module modification plate. (Refer to Figure 2 of 
this bulletin for the location of the RAT module modification plate.)
Table 11
RAT Module Part Number Changes (On the Aircraft)
From To
1702934E 1702934F
770952F 770952G
770379B 770379C
768084B 768084C
766351B 766351C

### Page 22

Original Issue Date: Mar 17/17
Revision 1: Jun 27/17
ERPS06M-29-22
Page 22
SERVICE BULLETIN
Hamilton Sundstrand Corporation, a UTC Aerospace Systems Company
UTC AEROSPACE SYSTEMS PROPRIETARY - Subject to the restriction on the title or cover page.
This document does not contain any export controlled technical data
(c) Do the steps that follow the next time  the modified RAT module is in the shop:
1 For RAT modules with bar-coded identification plates, the existing 
identification plate should be replaced with a new identification plate (refer to 
Table 12 of this bulletin) (refer to CMM 29-21-31, ASSEMBLY).
2 The existing modification plate should be replaced with a new modification 
plate (PN 761251) (refer to CMM 29-21-31, ASSEMBLY).
G. Identification (In the Shop)
(1) (PNs 766351B or 768084B) Identify the RAT module as follows (refer to SPM 
20-00-00, ASSEMBLY):
(a) Replace the identification plate (540, IPL Figure 1, CMM 29-21-31) as follows: 
NOTE: Incorporation of this bulletin advances the RAT module part number 
(refer to Table 12 of this bulletin).
1 Transfer any pertinent information from the existing identification plate (540) 
to a new identification plate (refer to Table 12 of this bulletin). 
2 Replace the existing identification plate (540) with the new identification 
plate (refer to Table 12 of this bulletin) (refer to CMM 29-21-31, ASSEMBLY).
(b) Replace the modification plate (555) as follows: 
1 If not already written, write the applicable new RAT module part number 
(766351C or 768084C) on a new modification plate (555).
2 Transfer any pertinent information from the existing modification plate (555) 
to the new modification plate (555). 
3 Write an X through Mod Dot 22 on the new modification plate (555).
4 Replace the existing modification plate (refer to CMM 29-21-31, 
ASSEMBLY) with the new modification plate (555).
(2) (PNs 770379B, 770952F, 1702934E) Identify the RAT module as follows (refer to SPM 
20-00-00, ASSEMBLY): 
(a) Replace the identification plate (540, IPL Figure 1, CMM 29-21-31) as follows: 
NOTE: Incorporation of this bulletin advances the RAT module part number 
(refer to Table 12 of this bulletin).
1 Replace the existing identification plate (540) with the new identification 
plate (refer to Table 12 of this bulletin) (refer to CMM 29-21-31, ASSEMBLY).
(b) Replace the modification plate (350, IP L Figure 1A, CMM 29-21-31) as follows: 
1 If not already written, write the applicable new RAT module part number 
(refer to Table 12 of this bulletin) on a new modification plate (350).

### Page 23

Original Issue Date: Mar 17/17
Revision 1: Jun 27/17
ERPS06M-29-22
Page 23
 
SERVICE BULLETIN
Hamilton Sundstrand Corporation, a UTC Aerospace Systems Company
UTC AEROSPACE SYSTEMS PROPRIETARY - Subject to the restriction on the title or cover page.
This document does not contain any export controlled technical data
2 Transfer any pertinent information from the existing modification plate (350) 
to the new modification plate (350). 
3 Write an X through Mod Dot 22 on the new modification plate (350).
4 Replace the existing modification plate (350) (refer to CMM 29-21-31, 
ASSEMBLY) with the new modification plate (350).
Table 12
Table 12
RAT Module Identification Plates (In the shop) 
From
Part Number
To
Part Number
Existing Identification Plate
Part Number
New Identification Plate 
Part Number
1702934E 1702934F 1700217-16 (360E, IPL Figure 1A, 
CMM 29-21-31)
1700217-19
770952F 770952G 1700217-15 (540K, IPL Figure 1, 
CMM 29-21-31)
1700217-18
770379B 770379C 1700217-14 (540J) 1700217-17
768084B 768084C 755595 (540)  Same
766351B 766351C 755595 (540)  Same

### Page 24

Original Issue Date: Mar 17/17
Revision 1: Jun 27/17
ERPS06M-29-22
Page 24
SERVICE BULLETIN
Hamilton Sundstrand Corporation, a UTC Aerospace Systems Company
UTC AEROSPACE SYSTEMS PROPRIETARY - Subject to the restriction on the title or cover page.
This document does not contain any export controlled technical data
Figure 1
Figure 1
Installation of the New Hydraulic Pump Identification Plate
SB-ERPS06M2922-108681
VIEW B
TEMPORARY
IDENTIFICATION
PLATE
PN 48683
LOCKWIRE
HS    P/N5917648
IDENTIFICATION
PLATE B
Parker   P/N4207905
HS    P/N5917648
LOCKWIRE

### Page 25

Original Issue Date: Mar 17/17
Revision 1: Jun 27/17
ERPS06M-29-22
Page 25
 
SERVICE BULLETIN
Hamilton Sundstrand Corporation, a UTC Aerospace Systems Company
UTC AEROSPACE SYSTEMS PROPRIETARY - Subject to the restriction on the title or cover page.
This document does not contain any export controlled technical data
Figure 2
Figure 2
Location of the RAT Module Modification and Identification Plates
SB-ERPS06M2922-108687
RAT MODULE
MODIFICATION PLATE
RAT MODULE
IDENTIFICATION PLATE

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
