# UTC Aerospace Systems Service Bulletin 2-1706-1-32-2

Copy: Revision 1 ("UTC Aerospace Systems SB 2-1706-1-32-2 rev 1"), 9 pages: PDF https://openairdocs.org/files/sha256/e8/5b/e85b18576e10bed48272c8403ff16270a1ebdb292e9886442f7bc70fe595361c; text https://openairdocs.org/service-documents/utc-aerospace-systems/sb-2-1706-1-32-2/file/e85b18576e10.md. Rights: © UTC Aerospace Systems. Filed by the FAA in regulations.gov docket FAA-2017-1120, the docket of AD 2018-07-13. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [UTC Aerospace Systems](https://openairdocs.org/service-documents/utc-aerospace-systems.md)
- Type: Service bulletin (Service Bulletin)
- Number: 2-1706-1-32-2
- Latest revision known: 2-1706-1-32-2, Revision 1 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/utc-aerospace-systems/sb-2-1706-1-32-2

## Text (9 pages)

Rights: © UTC Aerospace Systems. Filed by the FAA in regulations.gov docket FAA-2017-1120, the docket of AD 2018-07-13. Not covered by OpenAirDocs’ CC0 dedication. This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

UTC Aerospace Systems  Landing Systems - Wheels & Brakes
Goodrich Corporation
101 Waco Street
P.O. Box 340
SERVICE BULLETIN  U.S.A  Troy, Ohio 45373
Tel: +1 937 339 3811
e-mail: awb.techpubs@utas.utc.com
TITLE:  Landing Gear - Main Brake Assembly, - Introduction of an Inspection Procedure
to Make Sure the Wear Indicator Pins were Set Correctly.
TRANSMITTAL: This section transmits Revision 1 of Service Bulletin 2-1706-1-32-1.
Revised Figure 1. Changed the wear limit dimensions on the wear Indicator
pins. The correct wear limits are 1.65 inches (41,9 mm) maximum length.
Revised section 3.A. (4) and page 9. Changed the e-mail Address. The
correct e-mail address for the return form is crc@utas.utc.com.
Revision History
Revision 0  June 30, 2017
Revision 1  July 18, 2017
1. PLANNING INFORMATION
A. SB Effectivity
This Service Bulletin is applicable to Goodrich Brake Assemblies, P/N 2-1706-1, with
Serial Numbers Listed in Table 1.
B. Concurrent Requirements
Not Applicable.
C. Reason
Some wear indicator pins for Brake Assembly, P/N 2-1706-1, used on Cessna
Citation Mustang Aircraft may not accurately show brake wear.
D. Description
This Service Bulletin gives instructions to measure the wear indicator pins to find if
they were set correctly (refer to Figure 1).
This Service Bulletin also gives instructions for removal of in-service brake
assemblies and spare brake assemblies with incorrect wear indicator pins.
E. Compliance Recommendation
This Service Bulletin must be accomplished in 90 days, 75 landings or less to make
sure a brake assembly is removed from service for a shop visit when either of the
two wear indicator pins is more than 1.65 inches (41.9 mm) in length. Refer to
Figure 1.
EXPORT CLASSIFICATION
U.S. Export Classification: EAR 9E991
1188
Initial Issue: Jun 30/17  2-1706-1-32-1
Revision 1: Jul 18/17  Page 1 of 9
UTC AEROSPACE SYSTEMS PROPRIETARY
**Printed copies are considered UNCONTROLLED - Verify current issue before use**

### Page 2 (OCR)

UTC Aerospace Systems  Landing Systems - Wheels & Brakes
Goodrich Corporation
101 Waco Street
P.O. Box 340
SERVICE BULLETIN  T.S. AChio 45373  Tel: +1 937 339 3811
e-mail: awb.techpubs@utas.utc.com
F. Approval
This Service Bulletin has Goodrich engineering approval and has Cessna engineering
concurrence. This Service Bulletin contains no modification data that changes the
approved configuration and therefore no government approval or regulatory agency
approval is necessary.
G. Manpower
Approximately 10 minutes is necessary to do the measurement inspection of the
wear indicator pins.
H. Weight and Balance
None.
I. Electrical Load Data
Not Changed.
J. Software Accomplishment Summary
Not Applicable.
K. References
Goodrich Component Maintenance Manual (CMM) 32-46-77.
L. Other Publications Affected
Goodrich Component Maintenance Manual (CMM) 32-46-77.
M. Interchangeability or Intermixability of Parts
Not Applicable.
1188
Initial Issue: Jun 30/17  2-1706-1-32-1
Revision 1: Jul 18/17  Page 2 of 9
UTC AEROSPACE SYSTEMS PROPRIETARY
U.S. Export Classification: EAR 9E991
**Printed copies are considered UNCONTROLLED - Verify current issue before use**

### Page 3 (OCR)

UTC Aerospace Systems  Goodrich Corporation  Landing Systems - Wheels & Brakes
101 Waco Street
P.O. Box 340
SERVICE BULLETIN  Troy, Ohio 45373  Yes: +1 937 339 3811
e-mail: awb.techpubs@utas.utc.com
2. MATERIAL INFORMATION
A. Material - Price and Availability
Not Applicable.
B. Industry Support Information
Not Applicable.
C. Material Necessary for Each Component
(1) Material to be Purchased:
Not Applicable.
(2) Material Supplied by the Operator:
Yellow Paint.
D. Material Necessary for Each Spare
Not Applicable.
E. Reidentified Parts
Not Applicable.
F. Tooling - Price and Availability
Not Applicable.
1188
Initial Issue: Jun 30/17  2-1706-1-32-1
Revision 1: Jul 18/17  Page 3 of 9
UTC AEROSPACE SYSTEMS PROPRIETARY
U.S. Export Classification: EAR 9E991
**Printed copies are considered UNCONTROLLED - Verify current issue before use**

### Page 4 (OCR)

UTC Aerospace Systems  Landing Systems - Wheels & Brakes
Goodrich Corporation
101 Waco Street
P.O. Box 340
SERVICE BULLETIN  Troy, Ohio 45373  U.S.A..
Tel: +1 937 339 3811
e-mail: awb.techpubs@/utas.utc.com
3. ACCOMPLISHMENT INSTRUCTIONS
A. Measure the wear indicator pins for brake serial numbers listed in Table 1, as
follows:
NOTE:  Brake assemblies with serial numbers listed in Table 1 are subject to this
Service Bulletin. For brake assemblies that have serial numbers with an "A"
at the end, it is not necessary to follow the instructions in this Service
Bulletin.
NOTE:  At the next shop visit, affected brake serial numbers per Table 1 will have
an "A" stamped after the serial number to indicate the brake has been
overhauled and the wear indicator pins have been set correctly.
(1) Measure the full length of each wear indicator pin from the surface of the
pressure plate assembly (refer to Figure 1).
If one of the two wear indicator pins is 1.65 inches (41,9 mm) or more, remove
the brake assembly from service and contact Textron Aviation for an exchange
of the brake assembly.
(3) If the two wear indicator pins are 1.65 inches (41,9 mm) or less, paint the end
of the two wear indicator pins yellow (refer to Figure 1).
(4) Complete the attached FORM for all brake serial numbers inspected. Return the
form to crc@utas.utc.com
1188
Initial Issue: Jun 30/17  2-1706-1-32-1
Revision 1: Jul 18/17  Page 4 of 9
UTC AEROSPACE SYSTEMS PROPRIETARY
U.S. Export Classification: EAR 9E991
**Printed copies are considered UNCONTROLLED - Verify current issue before use**

### Page 5 (OCR)

UTC Aerospace Systems  Landing Systems - Wheels & Brakes
Goodrich Corporation
101 Waco Street
P.O. Box 340
SERVICE BULLETIN  Troy, Ohio 45373  U.S.A.
Tel: +1 937 339 3811
e-mail: awb.techpubs@utas.utc.com
PAINT END OF PIN YELLOW
(41,9)
MA  LENGTH
PRESSURE PLATE
•NOTE DIMENSIONS SH
Figure 1. Measure Length of the Wear Indicator Pin
1188
Initial Issue: Jun 30/17  2-1706-1-32-1
Revision 1: Jul 18/17  Page 5 of 9
UTC AEROSPACE SYSTEMS PROPRIETARY
U.S. Export Classification: EAR 9E991
**Printed copies are considered UNCONTROLLED - Verify current issue before use**

### Page 6 (OCR)

UTC Aerospace Systems  Landing Systems - Wheels & Brakes
Goodrich Corporation
101 Waco Street
P.O. Box 340
Troy, Ohio 45373
SERVICE BULLETIN  U.S.A.
Tel: +1 937 339 3811
e-mail: awb.techpubs@utas.utc.com
Table 1. List of Affected Brake Assembly Serial Numbers (Sheet 1 of 3)
0043  0044  0045  0046  0049  0050  0051  0054  0055  0057
0058  0060  0062  0063  0064  0066  0067  0068  0069  0073
0074  0075  0076  0078  0079  0080  0081  0082  0084  0085
0086  0087  0088  0101  0102  0103  0104  0105  0106  0107
0108  0109  0114  0115  0119  0120  0121  0122  0123  0124
0125  0126  0129  N/A  0131  0132  0133  0134  0135  0136
0137  0139  0141  0142  0143  0144  0145  9+10  0148  0149
0151  0154  0156  0158  0159  0162  0164  0165  0167  0168
0169  0170  0172  0173  0174  0176  0177  0178  0179  0181
0182  0183  0184  0185  0186  0187  8810  0189  0190  0191
0192  0193  0164  0195  0197  0198  0200  LOZO  9020  LOZ0
0208  6020  0120  0211  0213  0214  0215  0217  0218  0219
0220  EZZO  IZZO  0225  0226  0227  8ZZ0  0229  0230  0231
0232  0235  0236  0237  0239  0240  0241  0242
0243  ++ZO  0246  0247  0250  0251  0252  0254  9920
0256  0258  0259  0261  0264  0265  0266  1920  0268  0269
0270  0271  0273  0274  0275  0277  0278  0279  0295  0297
0298  0299  0080  0301  0302  0303  0304  0306  0307  0308
0309  0310  0311  0314  0316  0317  0318  0319  0320  0321
0322  0323  0324  0325  0326  0327  0329  0330  N/A  0333
0334  0337  0338  0339  0340  0341  0346  0347  0348  0349
0352  0354  0356  0357  0358  0359  0360  0361  0362  0363
0364  0365  9980  0367  0368  0369  0371  0372  0373  0376
0378  6280  08€0  0382  0384  0385  0386  0387  0388  0389
0390  0391  0392  0393  0395  0396  0397  0398  0399  0400
1188
Initial Issue: Jun 30/17  2-1706-1-32-1
Revision 1: Jul 18/17  Page 6 of 9
UTC AEROSPACE SYSTEMS PROPRIETARY
U.S. Export Classification: EAR 9E991
**Printed copies are considered UNCONTROLLED - Verify current issue before use**

### Page 7 (OCR)

UTC Aerospace Systems  Landing Systems - Wheels & Brakes
Goodrich Corporation
101 Waco Street
P.O. Box 340
Troy, Ohio 45373
SERVICE BULLETIN  U.S.A.
Tel: +1 937 339 3811
e-mail: awb.techpubs@utas.utc.com
Table 1. List of Affected Brake Assembly Serial Numbers (Sheet 2 of 3)
0401  0402  0403  0405  0407  0409  0410  0411  0415  0416
0417  0418  0419  0421  0422  0423  0424  0425  0426  0427
0428  0429  0430  0431  0433  0434  0435  0436  0437  0438
0439  0443  0444  0446  0447  0448  0450  0451  0452  0453
0454  0455  0462  0463  0465  0467  0468  0469  0472  0476
0477  0478  0479  0480  0483  0485  0486  0487  0488  0490
0494  0497  0498  0499  0500  1OS0  2090  2090
0504  0505  0508  0509  0510  0511  0514  0516  0517  0520
0522  0523  0524  0527  0528  0529  0530  0534  0535  0536
0538  0539  0541  0545  0546  0548  0549  0550  0551  0555
0557  0558  0561  0563  0567  0570  0571  0572  0574  0575
0576  0577  0578  0579  0580  0582  0583  0584  0585  0587
0589  0592  0593  0594  0596  0599  0600  2090  2090  ₺090
0606  0609  0613  0618  0619  0620  0621  2290  0623  0624
0625  0626  2290  0628  0630  0634  0635  9€90  0637  0638
0641  0642  0648  0649  0650  0651  0655  9990  0663  0664
0667  0669  0671  0672  0682  0683  0688  0689  0691  0692
0693  0694  0695  0696  0697  0702  0704  0705  0706  0707
0710  0711  0712  0713  0714  0715  0716  0717  0718  OZ20
0721  0723  0724  0726  0727  0728  0729  0730  0731  0732
0733  0737  0738  0739  0740  0750  0751  0752  0754  0757
0759  0763  0767  0769  0773  0776  0781  0784  0785  0786
0787  0790  0792  0794  0795  0796  0798  0801  0803  0804
0809  0810  0811  0813  0815  0816  0817  0818  0819  0821
0823  0824  0826  0827  0828  0831  0834  0837  0838  0842
1188
Initial Issue: Jun 30/17  2-1706-1-32-1
Revision 1: Jul 18/17  Page 7 of 9
UTC AEROSPACE SYSTEMS PROPRIETARY
U.S. Export Classification: EAR 9E991
**Printed copies are considered UNCONTROLLED - Verify current issue before use**

### Page 8 (OCR)

UTC Aerospace Systems  Landing Systems - Wheels & Brakes
Goodrich Corporation
101 Waco Street
P.O. Box 340
Troy, Ohio 45373
SERVICE BULLETIN  U.S.A
Tel: +1 937 339 3811
e-mail: awb.techpubs@utas.utc.com
Table 1. List of Affected Brake Assembly Serial Numbers (Sheet 3 of 3)
0843  0844  0845  0846  0847  0848  0849  0850  0851  0852
0853  0855  0857  0860  0862  0863  0864  0865  0866  0869
0870  0871  0872  0873  0877  0879  0882  0884  0885  0887
0888  0891  0892  0895  0897  0898  0899  0902  0903  0904
0907  0908  0909  0914  0919  0920  0923  0924  0926  0927
0933  0937  0938  0939  0940  0943  0945  0947  0951  0955
0956  0957  0958  0959  0960  960  0965  9960  0968  0972
0975  0976  0977  0978  0981  0982  0983  0986  0988  0990
0991  0992  0996  0998  1001  1006  1011  1013  1017  1022
1024  1027  1029  1030  1031  1032  LEOL  EVOL  1044  1047
1048  1049  1057  1061  990L  290 L  1074P  1768  0061
0061  0071  0194  0449  0553
NOTE: Serial Numbers are not in numerical order
1188
Initial Issue: Jun 30/17  2-1706-1-32-1
Revision 1: Jul 18/17  Page 8 of 9
UTC AEROSPACE SYSTEMS PROPRIETARY
U.S. Export Classification: EAR 9E991
**Printed copies are considered UNCONTROLLED - Verify current issue before use**

### Page 9 (OCR)

UTC Aerospace Systems  Landing Systems - Wheels & Brakes
Goodrich Corporation
101 Waco Streef
P.O. Box 340
Troy, Ohio 45373
SERVICE BULLETIN  Yes: 41 937 339 3811
e-mail: awb.techpubs@utas.utc.com
UTC Aerospace Systems  UTC Aerospace Systems
Landing Systems
Record all data on this form for each affected brake. Return form to UTAS.
Contact Textron Aviation for instructions regarding the brake.
CUSTOMER (COMPANY) NAME:
CUSTOMER ADORESS:
PERSON TO CONTACT (IF NECESSARY):
SIGNATURE:
DATE:
Brake Part  Brake  Serial No.  Aircraft  Number Of  Wear Indicator Pin  Wear Indicator Pin
Number  Serial No  or Tail No.  Landings  Measurement  Measurement
Send To: crc@utas.utc.com
1188  Initial Issue: Jun 30/17  2-1706-1-32-1
Revision 1: Jul 18/17  Page 9 of 9
UTC AEROSPACE SYSTEMS PROPRIETARY
U.S. Export Classification: EAR 9E991
**Printed copies are considered UNCONTROLLED - Verify current issue before use**

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
