# Viking Air Service Bulletin V6/0066: Revision A

- Rights: © Viking Air. Filed by the FAA in regulations.gov docket FAA-2020-1003; AD 2022-11-09 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Viking Air Service Bulletin V6/0066](https://openairdocs.org/service-documents/viking/v6-0066.md)
- Title as filed: Viking SB V6-0066 Rev A
- Pages: 10
- PDF: https://openairdocs.org/files/sha256/86/a4/86a4ba95b3d7892f019aca1098a2cdf20ef8a6d6e0a08f3bbd95115ad2092394
- Page: https://openairdocs.org/service-documents/viking/v6-0066/file/86a4ba95b3d7

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Page 1 of 2 ATA Ref. 57-51 
09-Dec-2019 Service Bulletin V6/0066 
REVISION TRANSMITTAL SHEET 
AILERON STRUCTURE INSPECTION
Service Bulletin No.: V6/0066 Date of Original Issue: 29 August 2019 
Revision No: A  Date of Issue: 09 December 2019 
This Service Bulletin is issued for a one time visual inspection of all the aileron internal structure using a 
borescope. 
NOTE 1: NO ACTION IS REQUIRED ON AIRCRAFT INSPECTED TO THE PREVIOUS ISSUE OF 
THIS SERVICE BULLETIN. 
NOTE 2: This revision introduces threshold flight hours/cycles/calendar time for the Service Bulletin 
effectivity.
NOTE 3: This revision supersedes the previous revision of this Service Bulletin. 
NOTE 4: Revision bars in the left margin of this Service Bulletin indicate changes from the  
previous revision. 
This page transmits Revision ‘A’ of Service Bulletin V6/0066, pages 1 thru 8, dated 09 December 2019. 
This Service Bulletin is re-issued to:  
1. Establish threshold flight hours or cycles or calendar time for inspection.  
2. Clarification that all aileron ribs are to be inspected, including end ribs. 
3. Add inspection of all the aileron internal structure.  
Remove Service Bulletin V6/0066 Revision ‘NC’ dated 29 August 2019 and replace with attached. 
Previous issues of Service Bulletin V6/0066: 
Initial Issue – Pages 1 thru 6 dated 29 August 2019

### Page 2

Page 2 of 2 ATA Ref. 57-51
09-Dec-2019 Service Bulletin V6/0066 

THIS PAGE INTENTIONALLY LEFT BLANK

### Page 3

1959 de Havilland Way 
Sidney, B.C. 
Canada V8L 5V5 
Tel: (250) 656 - 7227 
09-Dec-2019  S.B. V6/0066 
Revision ‘A’  Page 1 of 8 

DHC-6 
TWIN OTTER 
SERVICE BULLETIN 
 ATA SYSTEM: 57-51 NUMBER: V6/0066  

I. PLANNING INFORMATION 
A. Effectivity 
Aircraft Affected: All DHC-6 Twin Otters, All Series. 
NOTE: This Service Bulletin is only applicable to ailerons having accumulated 16,000 
flight hours or more, or 32,000 flight cycles or more, or 10 calendar years or more 
(whichever occurs first). 
B. Reason 
Cracks and corrosion have been found on the internal aileron structure. This Service 
Bulletin is issued for a one time visual inspection of the entire aileron internal structure 
using a borescope. 
C. Description 
Aileron structure is inspected via borescope through existing drain holes in the lower 
skin. 
D. Compliance 
NOTE: If Service Bulletin V6/0066 Revision ‘NC’ has already been accomplished, 
Revision ‘A’ of Service Bulletin V6/0066 is considered to be complied with.  
Operators shall accomplish the required inspections of this Service Bulletin within six (6) 
months from the issue date of this Service Bulletin. 
If any part is found cracked, damaged or discrepant, it shall be repaired or replaced before 
next flight. 
E. Approval 
The technical content of this Service Bulletin has been approved under the authority of 
Transport Canada Civil Aviation (TCCA) Design Approval Organization (DAO) 04-V-02. 
F. Labour Requirements 
Estimated time to accomplish this Service Bulletin is 3 hours. 
G. Weight and Balance 
Not affected.  
SUBJECT:  AILERON STRUCTURE INSPECTION

### Page 4

SERVICE BULLETIN V6/0066  
09-Dec-2019  S.B. V6/0066 
Revision ‘A’  Page 2 of 8 
H. Electrical Load Data 
Not affected. 
I. Publications Affected 
None
J. References 
PSM 1-6-3  Structural Repair Manual 
PSM 1-6-3RS  Structural Repair Schemes Manual 
For more information please contact: 
Viking Air Limited FAX: 403-295-8888 
Technical Support Telephone Numbers: 
7757 8th Street NE Regional: 587-430-0572 
Calgary, Alberta North America: 1-800-663-8444 
Canada, T2E 8A2 dh_technical.support@vikingair.com
II. ACCOMPLISHMENT INSTRUCTIONS 
A. Aileron Structure Inspection 
Visual inspection of the entire aileron internal structure, including front and rear spars, all 
aileron ribs (including end ribs and both sides of hinge arms), and upper and lower skins. 
Visual inspection to be done with a borescope, inserted through existing drain holes in the 
lower skin. Refer to Figure 2 for example of cracks in the rib radius; and Figure 3 for 
example of crack in the forward spar. 
1. Equipment 
Flexible borescope with: 
x Suitable size borescope head; 
x 10X Magnification; 
x Illumination;  
x Optional: capability to record digital images. 
2. Inspection Procedure 
a) Using a flexible borescope through existing drain holes, visually inspect the entire 
LH aileron internal structure, and upper and lower skins, for cracks, creases or 
buckling, corrosion, missing/smoking/working/broken fasteners, or other defects, 
along the length of the LH aileron assembly from aileron inboard end to outboard 
end.
b) Visually inspect between the leading edge and the front spar, between the front 
spar and rear spar, and between the rear spar and the trailing edge.  
c) Pay attention to the following areas for corrosion and cracks: 
x Fastener holes at all joints (e.g., skin to spar/rib flange joints, aileron hinge to 
spar/rib joints, trim tab hinge flange to skin/rear spar joints, joints on 
stiffeners, clips, brackets, straps, doublers, etc.);  


### Page 5

SERVICE BULLETIN V6/0066  
09-Dec-2019  S.B. V6/0066 
Revision ‘A’  Page 3 of 8 
x Spar/rib/stiffener flanges at edge of fastener heads or edge of washers/nuts 
(including anchor nuts); Refer to Figure 3 for example crack at a fastener hole 
in the aileron forward spar flange; 
x Open holes, tooling holes, drain holes, access cut-outs, and lightening holes; 
x Aileron lower skin at rib/spar attachments (both forward and aft of spars) for 
corrosion;
x Spar/rib/stiffener along bending/joggle radius. Refer to Figure 2 for example of 
cracks in the aileron rib radius. 
d) Repeat inspection for the RH Aileron Assembly. 
e) If any part is found damaged, replace or repair in accordance with an approved 
repair scheme. 
3. Operate ailerons and check for full and free range of movement. 
4. Complete attached Inspection Reply Form on Page 7 and return to Viking Technical 
Support within 30 days from date of the inspection.  
B. Recording 
After completion of this Service Bulletin, make the following entry in the aircraft log book: 
“Service Bulletin No. V6/0066 Revision ‘A’ – AILERON STRUCTURE INSPECTION has 
been incorporated”. 
III. MATERIAL INFORMATION AND TOOLING 
A. Material Information (Parts Required Per Aircraft) 
As required (On Condition) 
B. Tooling – Price and Availability 
Refer to Section II.A.1.

### Page 6 (OCR)

SERVICE BULLETIN V6/0066
Figure 1: Aileron Structure Inspection
09-Dec-2019  S.B. V6/0066
Revision 'A'  Page 4 of 8

### Page 7

SERVICE BULLETIN V6/0066  
09-Dec-2019  S.B. V6/0066 
Revision ‘A’  Page 5 of 8 







Figure 2: Example of Crack in Aileron Rib Radius 


### Page 8

SERVICE BULLETIN V6/0066  
09-Dec-2019  S.B. V6/0066 
Revision ‘A’  Page 6 of 8 

Figure 3: Example of Crack in Aileron Forward Spar  
Crack (visible from other side using borescope)
VIEW LOOKING OUTBOARD  (end rib removed for repairs)
Vertical Flange of Inboard Aileron Forward Spar

### Page 9

SERVICE BULLETIN V6/0066  
09-Dec-2019  S.B. V6/0066 
Revision ‘A’  Page 7 of 8 
Service Bulletin V6/0066 Revision A – Inspection Reply Form 
Operator:    Date of Inspection:  
Contact Person:  
Contact Phone/Email:    
A/C Registration #     A/C Serial #   
A/C TTSN     A/C TCSN   
L/H Aileron Part #     L/H Aileron Serial #    
Any previous repairs to L/H Aileron structure?  YES / NO 
R/H Aileron Part #     R/H Aileron Serial #    
Any previous repairs to R/H Aileron structure?  YES / NO 
Details of Previous Repairs (if any):    
Inspection Findings (Prior to Corrective Actions):
Corrective Actions:    
   
Please return form via email to dh_technical.support@vikingair.comor via fax to 403-295-8888

### Page 10

SERVICE BULLETIN V6/0066  
09-Dec-2019  S.B. V6/0066 
Revision ‘A’  Page 8 of 8 

THIS PAGE INTENTIONALLY LEFT BLANK


---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
