# Viking Air Service Bulletin V6/0067: Revision A

- Rights: © Viking Air. Filed by the FAA in regulations.gov docket FAA-2021-0217; AD 2022-10-03 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Viking Air Service Bulletin V6/0067](https://openairdocs.org/service-documents/viking/v6-0067.md)
- Title as filed: Viking DHC-6 Twin Otter SB V60067 Rev A
- Pages: 10
- PDF: https://openairdocs.org/files/sha256/d8/b3/d8b3ad4a216ddcb9b381ffc9d61912614a42d8ca08c32e9ddf6959d9b2f3bb7a
- Page: https://openairdocs.org/service-documents/viking/v6-0067/file/d8b3ad4a216d

## Text

Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Page 1 of 2 ATA Ref. 27-20 
26-Jan-2021 Service Bulletin V6/0067 
REVISION TRANSMITTAL SHEET 
RUDDER PEDAL TORQUE TUBE QUADRANT – INSPECTION 
Service Bulletin No.: V6/0067 Date of Original Issue: 16 Jul 2020 
Revision No: A Date of Issue: 26 Jan 2021  
This Service Bulletin is issued to notify Operators of findings of loose quadrants and loose or smoking 
rivets on the rudder pedal torque tube. 
This Service Bulletin introduces instructions for detailed visual inspection and check for security. 
NOTE 1: NO ACTION IS REQUIRED ON AIRCRAFT INSPECTED TO THE PREVIOUS ISSUE OF 
THIS SERVICE BULLETIN. 
NOTE 2: This revision supersedes the previous revision of this Service Bulletin. 
NOTE 3: Revision bars in the left margin of this Service Bulletin indicate changes from the  
previous revision. 
This page transmits Revision ‘A’ of
 Service Bulletin V6/0067, pages 1 thru 8, dated 26 January 2021. 
This Service Bulletin is re-issued to:  
1. Introduce Post Mod 6/2496 rudder torque tube assembly part number C6CF1019-5 (and NHA
installation part number C6CF1018-S105) as acceptable parts for installation.
2. Establish aircraft effectivity cut-off at MSN 987 (Pre Mod 6/2496).
3. Clarification of inspection procedure with Gust Lock on.
Remove Service Bulletin V6/0067 Revision ‘NC’ dated 16 July 2020 and replace with attached. 
Previous issues of Service Bulletin V6/0067: 
Initial Issue – Pages 1 thru 6 dated 16 July 2020

### Page 2

Page 2 of 2 ATA Ref. 27-20 
26-Jan-2021 Service Bulletin V6/0067 
  
THIS PAGE INTENTIONALLY LEFT BLANK

### Page 3

1959 de Havilland Way 
Sidney, B.C. 
Canada V8L 5V5 
Tel: (250) 656 - 7227 
 
 
 
26-Jan-2021  S.B. V6/0067 
Revision ‘A’  Page 1 of 8 
 
DHC-6 
TWIN OTTER 
SERVICE BULLETIN  
 ATA SYSTEM: 27-20 NUMBER: V6/0067  
  
I. PLANNING INFORMATION 
A. Effectivity 
Aircraft Affected: DHC-6, Serial Numbers 001 thru 987 (Pre Mod 6/2496). 
B. Reason 
There have been findings of loose quadrants on the rudder pedal torque tube, and signs 
of loose rivets or rivet joint wear, such as dark areas or streaks around the rivet heads 
(smoking rivets) and quadrant to torque tube interface for fretting wear products such as 
black powder.  
C. Description 
Rudder pedal torque tube quadrant is checked for looseness and visually inspected for 
signs of loose or smoking rivets.  
This Service Bulletin is issued to establish a compliance threshold for the initial 
inspection of the rudder pedal torque tube to quadrant joint. Repeat inspections are to be 
done in accordance with PSM 1-6-7 inspection schedule. 
D. Compliance 
NOTE: If Service Bulletin V6/0067 Revision ‘NC’ has already been accomplished, 
Revision ‘A’ of Service Bulletin V6/0067 is considered to be complied with. 
Operators shall incorporate the initial inspection of this Service Bulletin before February 17, 2021. 
If any rudder pedal torque tube quadrant is found loose, or with signs of loose or smoking 
rivets, it shall be repaired or replaced before next flight. 
E. Approval 
The technical content of this Service Bulletin has been approved under the authority of 
Transport Canada Civil Aviation (TCCA) Design Approval Organization (DAO) 04-V-02. 
F. Labour Requirements 
Estimated time to accomplish this Service Bulletin is 1 hour. 
SUBJECT:  RUDDER PEDAL TORQUE TUBE QUADRANT – INSPECTION

### Page 4

SERVICE BULLETIN V6/0067 
 
26-Jan-2021  S.B. V6/0067 
Revision ‘A’  Page 2 of 8 
G. Weight and Balance 
Not affected. 
H. Electrical Load Data 
Not affected. 
I. Publications Affected 
PSM 1-64-2  Aircraft Maintenance Manual (Series 400) 
PSM 1-63-2 Aircraft Maintenance Manual (Series 300) 
PSM 1-63S-2 Aircraft Maintenance Manual (Series 300 Short Nose) 
PSM 1-6-2 Aircraft Maintenance Manual (Series 1/100/200) 
J. References 
This Service Bulletin is self-contained. No drawings are supplied. For more information 
please contact: 
Viking Air Limited FAX: 403-295-8888 
Technical Support Telephone Numbers: 
7757 8th Street NE   Regional: 587-430-0572 
Calgary, Alberta   North America: 1-800-663-8444 
Canada, T2E 8A2 dh_technical.support@vikingair.com 
II. ACCOMPLISHMENT INSTRUCTIONS 
A. Inspection of Rudder Peda l Torque Tube Quadrant 
1. Locate and open right-hand access panel 15 directly below cockpit (under co-pilot seat) to 
access the rudder pedal torque tube and quadrant. Refer to Figure 1-2 in PSM 1-6-2, or 
Chapter 12-00-00 Figure 1 in PSM 1-63-2, 1-63S-2 or 1-64-2, as applicable. 
2. Engage the rudder quadrant gust lock by centering the rudder pedals and lifting lever in 
the floor labelled LIFT FOR GUST LOCK just aft of the left (pilot) side rudder pedals.  
3. Hold the rudder torque tube with one hand, then try to rotate the torque tube back and 
forth to check for any relative rotation (looseness) against the quadrant.  
NOTE: There may be some small amount of free play between the gust lock plunger and 
the mating notch in the quadrant. This is not to be mistaken for looseness 
between the quadrant and torque tube. 
4. NOTE: Two technicians will be required to do the following inspection: 
While one technician pushes the rudder pedals back and forth, the other technician 
physically watches the rudder pedal torque tube to quadrant joint for any sign of relative 
rotation (looseness). 
If any relative rotation is observed, the rudder pedal torque tube to quadrant joint is 
considered loose. 
5. Disengage the rudder quadrant gust lock by lowering lever in floor labelled LIFT FOR 
LOCK just aft of the pilot side rudder pedals.

### Page 5

SERVICE BULLETIN V6/0067 
 
26-Jan-2021  S.B. V6/0067 
Revision ‘A’  Page 3 of 8 
6. Hold the rudder quadrant with one hand and try to move the quadrant laterally (toward 
left-hand then right-hand direction). 
If any relative movement in lateral direction is observed, the rudder pedal torque tube to 
quadrant joint is considered loose.   
7. Use a mirror, flashlight and 10x magnification (or a flexible borescope with light) to do a 
detailed visual inspection of the rudder torque tube assembly for signs of loose rivets or 
rivet joint wear, such as dark areas or streaks around the rivet heads or quadrant to 
torque tube interface for fretting wear product such as black powder. 
NOTE: There are 8 blind rivets attaching the quadrant to rudder pedal torque tube. 
If rudder torque tube to quadrant joint is loose or there are signs of loose rivets or rivet 
joint wear/smoking rivets, the rudder pedal torque tube/quadrant assembly shall be 
repaired or replaced with new or serviceable assembly before next flight. Contact Viking 
Technical Support for repair disposition, if repair option is selected. 
8. Vacuum area. Ensure the area is clean and clear of any swarf, tools, or foreign object 
debris (FOD). 
9. Re-install the access panel opened in step II.A.1. and return the aircraft to service. 
10. Complete attached Inspection Reply Form on Page 7 and return to Viking Technical 
Support.  
B. Recording 
After completion of this Service Bulletin, make the following entry in the aircraft logbook: 
“Service Bulletin No. V6/0067 Revision ‘A’ – RUDDER PEDAL TORQUE TUBE 
QUADRANT – INSPECTION has been incorporated”.

### Page 6

SERVICE BULLETIN V6/0067 
 
26-Jan-2021  S.B. V6/0067 
Revision ‘A’  Page 4 of 8 
III. MATERIAL INFORMATION AND TOOLING 
A. Material Information (Par ts Required Per Aircraft) 
C6CF1019-1, C6CF1019-3 (Pre Mod 6/2496) or C6CF1019-5 (Mod 6/2496) Torque Tube 
Assembly (or applicable future superseding part number). 
NOTE: Replacement assemblies may have been supplied as spares, with OEM 
manufacturing part numbers. These OEM manufacturing part number assemblies are 
supplied with C6CF1022-1 bracket assemblies installed and are otherwise identical 
to the parts listed above. 
C6CF1019-1 or C6CF1019-3 may have been provided as part of OEM manufacturing 
number assembly C6CF1018-S101.  
C6CF1019-5 may have been provided as part of OEM manufacturing number 
assembly C6CF1018-S105. 
B. Tooling – Price and Availability 
 Flashlight and mirror 
 10x Magnification glass 
 Flexible borescope kit with light 
 Standard aviation hand tools.

### Page 7

SERVICE BULLETIN V6/0067 
 
26-Jan-2021  S.B. V6/0067 
Revision ‘A’  Page 5 of 8 
IV. DRAWINGS AND FIGURES 
 
 
 
 
 
     
FIGURE 1 – RUDDER PEDAL TORQUE TUBE TO QUADRANT JOINT 
(EXAMPLE 1 OF LOOSE RIVET INDICATIONS) 
  
Rudder Pedal  
Torque Tube 
Quadrant 
Fretting   
Indication 
After Cleaning 
Dark Streak  
Indication

### Page 8

SERVICE BULLETIN V6/0067 
 
26-Jan-2021  S.B. V6/0067 
Revision ‘A’  Page 6 of 8 
 
 
 
 
 
    
FIGURE 2 –JOINT WEAR AND FRETTING RIVET INDICATIONS 
(EXAMPLE 2 OF LOOSE RIVET INDICATIONS) 
  
Fretting   
Indication 
Joint Wear 
Indication

### Page 9

SERVICE BULLETIN V6/0067 
 
26-Jan-2021  S.B. V6/0067 
Revision ‘A’  Page 7 of 8 
Service Bulletin V6/0067 – Inspection Reply Form 
Operator:    Date of Inspection:   
Contact Person:     
Contact Phone/Email:     
A/C Registration #     A/C Serial #    
A/C TTSN     A/C TCSN    
 
Inspection Findings (Prior to Corrective Actions): 
  
  
  
  
  
  
  
  
  
  
Corrective Actions: 
  
  
  
  
  
  
  
Please return form via email to dh_technical.support@vikingair.com or via fax to 403-295-8888

### Page 10

SERVICE BULLETIN V6/0067 
 
26-Jan-2021  S.B. V6/0067 
Revision ‘A’  Page 8 of 8 
 
THIS PAGE INTENTIONALLY LEFT BLANK

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
