# STC SA00730AT-D

- Type: Supplemental type certificate
- Status: Current, Reissued
- Holder: FFC Manufacturing, United States
- Description: Installation of replacement fuel cell assemblies
- Applied: September 30, 1995
- Status date: May 1, 2009
- Product: Aircraft, Single-Engine
- Certification basis: Part 21
- Data sheets: [TCDS 3A16](https://openairdocs.org/tcds/3A16)
- Certificate PDF: https://openairdocs.org/files/sha256/af/ac/afac7296998df12a14788f1c51633f1207d9d21fae6396d2e68d17379f8ab26b
- FAA DRS: https://drs.faa.gov/browse/excelExternalWindow/9E98D0EC3AD5E249862575B7006C126C.0001
- DRS record last changed: December 5, 2025
- Page: https://openairdocs.org/stc/SA00730AT-D

## ADs that name it (0)

None.

## Approved models (3)

- Hawker Beechcraft Corporation 58 ([TCDS 3A16](https://openairdocs.org/tcds/3A16))
- Hawker Beechcraft Corporation 95-55 ([TCDS 3A16](https://openairdocs.org/tcds/3A16))
- Hawker Beechcraft Corporation E55 ([TCDS 3A16](https://openairdocs.org/tcds/3A16))

## What the certificate says

Read from the PDF's text layer, without the form's printed wording; the layout is lost and the order can differ. The PDF is the record.

This certificate issued to

Part * of the Regulations.

Description of Type Design Change: Installation of replacement fuel cell assemblies in according to FFC Manufacturing Composite Drawing B-240-1 (-2)(-3) dated April 14, 1995 and FFC Manufacturing Drawing B-2530-9-1 (2), B-2033-1-1 (-2), B- 2034-3-1 (-2) dated April 14, 1995 or later FAA approved revision.

Limitations and Conditions: This approval should not be extended to other aircraft of these models on which other previously approved modifications are incorporated unless it is determined by the installer that the interrelationship between this change and any of those other previously approved modifications will introduce no adverse effects upon the airworthiness of the aircraft. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

(See continuation 3 of 3)

FFC Manufacturing 4010 Pilot Dr., Suite 103 Memphis, TN 38118 3A16 Make: Beech Model: (See continuation 3 of 3) Date reissued: May 01, 2009

( Signature) Melvin D. Taylor Manager Atlanta Aircraft Certification Office

( Title)

Date of application: September 20, 1995

Date of issuance: October 13, 1995

FAA FORM 8110-2-1(10-69) PAGE 2 of 3 PAGES

Number SA00730AT-D

FAA FORM 8110-2-1(10-69) PAGE 3 of 3 PAGES

Number SA00730AT-D

Model Continuation:

FFC Manufacturing replacement part numbers 2530-9 (-10) are eligible for installation on Beech 95-55, E55 and 58 models serial series TH-1 through TH-384. FFC Manufacturing replacement part numbers 2033-1(-2) are eligible for installation on Beech 95-55, E55 and 58 models serial series TC-1608 through TC-2002 except TC-1970, TE-938, TE-943 through TE-1083 except TE-1081, TH-385 through TH-772 except TH-766. FFC Manufacturing replacement part numbers 2034-3(-4) are eligible for installation on Beech 95-55, E55, and 58 models serial series TC-1970, TC-2003 and after, TE-1081, TE-1084 and after, TH-766, TH-773 and after.

Limitations and Conditions – Continued:

FFC Manufacturing part numbers 2530-9(-10) will be replacement s for Beech part numbers 58- 380030-9(-10). FFC Manufacturing part number 2033-1(-2) will be replacements for Beech part numbers 002-920033-1(-2). FFC Manufacturing part numbers 2034-3(-4) will be replacements for Beech part numbers 002-920034-3(-4).

## Every issue (1)

- May 1, 2009: Reissued, Current. [certificate](https://openairdocs.org/files/sha256/af/ac/afac7296998df12a14788f1c51633f1207d9d21fae6396d2e68d17379f8ab26b)

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain.