# STC SA00731AT-D

- Type: Supplemental type certificate
- Status: Current, Reissued
- Holder: FFC Manufacturing, United States
- Description: Installation of replacement fuel cell assemblies
- Applied: September 30, 1995
- Status date: May 1, 2009
- Product: Aircraft, Single-Engine
- Certification basis: Part 21
- Data sheets: [TCDS A12CE](https://openairdocs.org/tcds/A12CE)
- Certificate PDF: https://openairdocs.org/files/sha256/cc/2b/cc2b6537e800e1d2f97dbd68b68f820f692311ad4f06c72cdc965266750846ce
- FAA DRS: https://drs.faa.gov/browse/excelExternalWindow/2F4D14FF88CB9B2C862575BA00481538.0001
- DRS record last changed: December 5, 2025
- Page: https://openairdocs.org/stc/SA00731AT-D

## ADs that name it (0)

None.

## Approved models (3)

- Hawker Beechcraft Corporation 60 ([TCDS A12CE](https://openairdocs.org/tcds/A12CE))
- Hawker Beechcraft Corporation A60 ([TCDS A12CE](https://openairdocs.org/tcds/A12CE))
- Hawker Beechcraft Corporation B60 ([TCDS A12CE](https://openairdocs.org/tcds/A12CE))

## What the certificate says

Read from the PDF's text layer, without the form's printed wording; the layout is lost and the order can differ. The PDF is the record.

This certificate issued to

Part * of the Regulations.

Description of Type Design Change: Installation of replacement fuel cell assemblies according to FFC Manufacturing Composite Drawing B-240-1 (-2)(-3) dated April 14, 1995 and FFC Manufacturing Drawing B-2530-9-1 (2), B-2657-3-1 (-2), dated April 14, 1995 or later FAA approved revision.

Limitations and Conditions: This approval should not be extended to other aircraft of these models on which other previously approved modifications are incorporated unless it is determined by the installer that the interrelationship between this change and any of those other previously approved modifications will introduce no adverse effects upon the airworthiness of the aircraft. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

(See continuation 3 of 3)

FFC Manufacturing 4010 Pilot Dr., Suite 103 Memphis, TN 38118 A12CE Make: BEECH Model: (See continuation 3 of 3) Date reissued: May 01, 2009

( Signature) Melvin D. Taylor Manager Atlanta Aircraft Certification Office

( Title)

Date of application: September 20, 1995

Date of issuance: October 13, 1995

FAA FORM 8110-2-1(10-69) PAGE 2 of 3 PAGES

Number SA00731AT-D

FAA FORM 8110-2-1(10-69) PAGE 3 of 3 PAGES

Number SA00731AT-D

Model Continuation:

FFC Manufacturing replacement part numbers 2530-9 (-10) are eligible for installation on Beech 60, A60 and B60 models serial series P-247 through P-348, P-365 through P-401. FFC Manufacturing replacement part numbers 2657-3(-4) are eligible for installation on Beech 60, A60 and B60 model serial series P-402 and after.

Limitations and Conditions – Continued:

FFC Manufacturing part numbers 2530-9(-10) will be replacement s for Beech part numbers 58- 380030-9(-10). FFC Manufacturing part number 2657-3(-4) will be replacements for Beech part numbers 60-921057-3(-4).

## Every issue (1)

- May 1, 2009: Reissued, Current. [certificate](https://openairdocs.org/files/sha256/cc/2b/cc2b6537e800e1d2f97dbd68b68f820f692311ad4f06c72cdc965266750846ce)

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain.