# STC SA01764SE

- Type: Supplemental type certificate
- Status: Current, Amended
- Holder: AeroMech Incorporated, United States
- Description: ONE-ONLY: Non-Group (Individual) aircraft approval for Reduced Vertical Separation Minimum (RVSM), S/N 1006
- Applied: April 16, 2007
- Status date: June 26, 2007
- Product: Aircraft, Single-Engine
- Certification basis: Part 21, Part 23
- Data sheets: [TCDS A59EU](https://openairdocs.org/tcds/A59EU)
- Certificate PDF: https://openairdocs.org/files/sha256/32/be/32be2468ce051f53f45ecc6f9590f51868d7b1ba6981bbb8bf49e149b528fe36
- FAA DRS: https://drs.faa.gov/browse/excelExternalWindow/498EF146CB7DCC9A8625794300787DCD.0001
- DRS record last changed: December 6, 2025
- Page: https://openairdocs.org/stc/SA01764SE

## ADs that name it (0)

None.

## Approved models (1)

- Piaggio Aero Industries S.p.A. P-180 ([TCDS A59EU](https://openairdocs.org/tcds/A59EU))

## What the certificate says

Read from the PDF's text layer, without the form's printed wording; the layout is lost and the order can differ. The PDF is the record.

United States of America Department of Transportation _ Federal Aviation Administration Supplemental Type Certificate Number SA01764SE

This certificate, issued to: AeroMech Incorporated 1616 Hewitt Avenue, Suite 312 Everett, WA 98201 Part 23 of the Federal Aviation Regulations.

Original Product⎯Type Certificate Number: A59EU (Revision 15) Make: Piaggio Model: P-180, Serial Number 1006

Description of the Type Design Change: Non-Group (Individual) aircraft approval for Reduced Vertical Separation Minimum (RVSM) in accordance with AeroMech Document No. AMI-QD-P180-0705, Revision “New,” dated May 24, 2007 or latest FAA approved revision.

Limitations and Conditions: Instructions for Initial and Continued Airworthiness, Document AMI-IICA-P180- 0705, Revision “New,” dated May 24, 2007, or latest FAA approved revision, is a required part of this STC.

The Airplane Flight Manual Supplement for the Piaggio P-180, Serial Number 1006, AeroMech Document AMI- AFMS-P180-0713, Revision “A,” FAA approved June 26, 2007, or latest FAA approved revision, is required onboard for operation of the aircraft.

This approval should not be extended to other specific airplanes of these models on which previous modifications are incorporated, unless it is determined that the interrelationship between this approval and any of those previously approved modifications will introduce no adverse effects upon the airworthiness of that airplane.

Descriptive data pertaining to this design change are considered inadequate for duplication on other products.

This approval is limited to Piaggio P-180, Serial Number1006 only.

A copy of this certificate must be maintained as part of the permanent records of the aircraft. If the holder agrees to permit another person to use this certificate, the holder shall give the other person written evidence of the permission.

Date of application: April 16, 2007 Date reissued:

Date of issuance: June 21, 2007 Date amended: June 26, 2007

(Signature)

Acting Manager, Seattle Aircraft Certification Office (Title)

## Every issue (1)

- June 26, 2007: Amended, Current. [certificate](https://openairdocs.org/files/sha256/32/be/32be2468ce051f53f45ecc6f9590f51868d7b1ba6981bbb8bf49e149b528fe36)

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain.