# STC SA01850WI

- Type: Supplemental type certificate
- Status: Current, Issued
- Holder: Aircraft Structures International Corporation, United States
- Description: Remove and replace fuselage-strut, main landing gear, wing and wing-flap track fitting
- Applied: November 10, 2015
- Status date: August 28, 2017
- Product: Aircraft, Small Airplane
- Certification basis: Part 21
- Data sheets: [TCDS A37CE](https://openairdocs.org/tcds/A37CE)
- Certificate PDF: https://openairdocs.org/files/sha256/e0/ba/e0ba3402abe5da9b2aa5874c35468bd91b6a848ebbebd3effb04f26f5035c936
- FAA DRS: https://drs.faa.gov/browse/excelExternalWindow/29411B7CA64011418625818B006F2ADF.0001
- DRS record last changed: December 5, 2025
- Page: https://openairdocs.org/stc/SA01850WI

## ADs that name it (0)

None.

## Approved models (2)

- Textron Aviation Inc. 208 ([TCDS A37CE](https://openairdocs.org/tcds/A37CE))
- Textron Aviation Inc. 208B ([TCDS A37CE](https://openairdocs.org/tcds/A37CE))

## What the certificate says

Read from the PDF's text layer, without the form's printed wording; the layout is lost and the order can differ. The PDF is the record.

FAA Form 8110-2 (5/14) Page 1 of

Part of the

Signature

Title Aircraft Structures International Corporation 620 N. Rock Road, Suite 230, #233 Derby, KS 73701 3 SA01850WI Federal Aviation Regulations.

23 Remove and replace fuselage-strut, main landing gear, wing and wing-flap track fitting in accordance with Master Data List (MDL), Document No. 11534000-300, Rev. B, dated 7/21/17, or later FAA Approved revision.

1. This installation should not be incorporated on any aircraft unless it is determined that the interrelationship between this installation and any previously approved configuration will not introduce adverse effect upon the airworthiness of the airplane.

(See continuation sheet page 3) Textron Aviation 208, 208B November 10, 2015 August 28, 2017 A37CE Linda Dicken Associate ACO Manager, AIR-7K3 Wichita ACO Branch

FAA Form 8110-2 (5/14) Page 2 of

To (Name and address of transferee)

From (Name and address of grantor)

3 SA01850WI

FAA Form 8110-2 (5/14) Page 3 of

3 Date Issued: August 28, 2017

Limitations and Conditions: (continued from page 1)

2. Model 208, s/n 20800001 and On, and Model 208B, s/n 208B00001 and On, with maximum takeoff and flight weights of 8750 pounds or less.

3. Instructions for Continued Airworthiness (ICA), Document No. 11534000-600, Rev. B, dated 7/21/17, or later FAA accepted revision, must be made available to the operator at the time of installation. The ICA does not change the Textron Aviation ICA limitations. It provides a procedure to reset the inspection requirements for the replacement fittings, thus zeroing the in service hours for the new fittings. Subsequent inspections for fittings installed per the MDL Document No. 11534000-300, Rev.

B, dated 7/21/17, or later FAA Approved revision, will be as defined in the Textron Aviation ICA limitations.

------------ END ----------- SA01850WI

## Every issue (1)

- August 28, 2017: Issued, Current. [certificate](https://openairdocs.org/files/sha256/e0/ba/e0ba3402abe5da9b2aa5874c35468bd91b6a848ebbebd3effb04f26f5035c936)

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain.