# STC SA02786CH

- Type: Supplemental type certificate
- Status: Current, Issued
- Holder: Turbine Conversions Ltd, United States
- Description: Installation of a Single Point Ground Fueling System
- Applied: October 9, 2009
- Status date: December 22, 2009
- Product: Aircraft, Single-Engine
- Certification basis: Part 21
- Data sheets: [TCDS 1A16](https://openairdocs.org/tcds/1A16)
- Certificate PDF: https://openairdocs.org/files/sha256/0d/9b/0d9b3c3bf55a05ef884ce034167fcff831653a1cfa90d2204749dba7ce89b147
- FAA DRS: https://drs.faa.gov/browse/excelExternalWindow/3B4C10A934AB8A8D862576AA005498F5.0001
- DRS record last changed: December 5, 2025
- Page: https://openairdocs.org/stc/SA02786CH

## ADs that name it (0)

None.

## Approved models (10)

- Allied Ag Cat Productions Inc. G-164 ([TCDS 1A16](https://openairdocs.org/tcds/1A16))
- Allied Ag Cat Productions Inc. G-164A ([TCDS 1A16](https://openairdocs.org/tcds/1A16))
- Allied Ag Cat Productions Inc. G-164B ([TCDS 1A16](https://openairdocs.org/tcds/1A16))
- Allied Ag Cat Productions Inc. G-164B (with 73 inch wing gap) ([TCDS 1A16](https://openairdocs.org/tcds/1A16))
- Allied Ag Cat Productions Inc. G-164B-15T ([TCDS 1A16](https://openairdocs.org/tcds/1A16))
- Allied Ag Cat Productions Inc. G-164B-20T ([TCDS 1A16](https://openairdocs.org/tcds/1A16))
- Allied Ag Cat Productions Inc. G-164B-34T ([TCDS 1A16](https://openairdocs.org/tcds/1A16))
- Allied Ag Cat Productions Inc. G-164C ([TCDS 1A16](https://openairdocs.org/tcds/1A16))
- Allied Ag Cat Productions Inc. G-164D ([TCDS 1A16](https://openairdocs.org/tcds/1A16))
- Allied Ag Cat Productions Inc. G-164D (with 73 inch wing gap) ([TCDS 1A16](https://openairdocs.org/tcds/1A16))

## What the certificate says

Read from the PDF's text layer, without the form's printed wording; the layout is lost and the order can differ. The PDF is the record.

Part 8.10 of the Civil Air Regulations See Type Certificate Data Sheet. NO. 1A16 for complete certification basis.

Installation of a Single Point Ground Fueling System in accordance with Installation Manual #16401, Revision IR, dated May 27, 2009, or later FAA Approved revision.

1. Compatibility of this design change with previously approved modifications must be determined by the installer.

2. FAA Approved Airplane Flight Manua l Supplement for Aircraft Modified In Accordance With STC SA02786CH, Revision IR, dated June 19, 2009 or later FAA Approved revision is required.

3. Instructions for Continued Airworthiness, Turbines C onversions, LTD Maintenance Ma nual #16404, Revision IR, dated June 18, 2009, or later FAA Accepted revision is required.

4. If the holder agrees to permit another pers on to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

...End...

This certificate and the supporting data, which is the basis for approva l, shall remain in effect until surrendered, suspended, revoked or a termination date is otherwise established by the Administrator of the Federal Aviation Administration.

Turbine Conversions, LTD 18155 120th Ave.

Nunica, MI 49448 1A16

Allied Ag Cat Productions, Inc. Make :

Model : G-164, G-164A, G-164B, G-164B with 73”, G-164B-15T, G-164B-34T, G-164B-20T, G-164C, G-164D, G-164 with 73” wing gap.

(Signature) Thaddeus D. Krolicki, Jr.

Manager, Propulsion Branch Chicago Aircraft Certification Office

(Title)

Date of application: October 9, 2009

Date of issuance: December 22, 2009

## Every issue (1)

- December 22, 2009: Issued, Current. [certificate](https://openairdocs.org/files/sha256/0d/9b/0d9b3c3bf55a05ef884ce034167fcff831653a1cfa90d2204749dba7ce89b147)

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain.