# STC SA04019AT

- Type: Supplemental type certificate
- Status: Current, Reissued
- Holder: Aeronautical Design Service Pty Ltd The
- Description: Installation of The Aeronautical Design Service (ADS) part number 1008020828 Stabilator Horn
- Status date: September 12, 2013
- Data sheets: A1EA, A1EA
- Certificate PDF: https://openairdocs.org/files/sha256/78/58/7858a74dda2690704af22070c026fecc4552c3480625502b17d48b9b56ed6072
- FAA DRS: https://drs.faa.gov/browse/excelExternalWindow/72A4890C8C8CF94B86257C0E006905B0.0001
- Page: https://openairdocs.org/stc/SA04019AT

## ADs that name it

None.

## Approved models (2)

- Piper Aircraft Inc. PA-30 (TCDS A1EA)
- Piper Aircraft Inc. PA-39 (TCDS A1EA)

## What the certificate says

Read from the PDF's text layer, without the form's printed wording; the layout is lost and the order can differ. The PDF is the record.

IMPORT Number SA04019AT

This certificate issued to

Part 3 of the Civil Air Regulations.

Description of Type Design Change: Installation of The Aeronautical Design Service (ADS) part number 1008020828 Stabilator Horn in accordance with drawing list ADS 100517-1-MDL revision 7 (section 2) dated 10 July 2013, or later FAA approved revision, as a replacement for the Piper component P/N 20397-00 (also identified as 20397-000).

1. Instructions for Continued Airworthiness, ADS 100517-1-15-FAA Rev 6, dated 11 July 2013, or later FAA approved revision, is a required part of this STC, and must be incorporated into the operator’s maintenance program.

The Aeronautical Design Service Pty Ltd 5 Gunnaroo Lane Montville: Queensland 4560 Australia A1EA Make: Piper Model: PA-30, PA-39 Date of application: December 13, 2010

Date of issuance: July 23, 2013

Date reissued: September 12, 2013

(Signature)

Melvin D. Taylor Manager, Atlanta Aircraft Certification Office

(Title)

Transfer the ownership of Supplemental Type Certificate Number

to (Name of transferee)

(Address of transferee) (Number and street)

(City, State, and ZIP code)

from (Name of grantor) (Print or type)

(Address of grantor) (Number and street)

(City, State, and ZIP code)

Signature of grantor (In ink):

Supplemental Type Certificate (Continuation Sheet) IMPORT Number SA04019AT

Description of Type Design Change: (Continued)

Required type design data:

• Installation per ADS 100517-1-MDL (Rev 7) dated 10 July 2013, or later FAA approved revision

• Maintenance per ADS 100517-1-15-FAA Instructions for Continuing' Airworthiness Service Manual Supplement, Revision 6, dated 11 July 2013, or later FAA approved revision

Limitations and Conditions: (Continued)

2. Approval of this change in type design applies to the above model aircraft only. This approval should not be extended to other aircraft of this model on which other previously approved modifications are incorporated, unless it is determine by the installer that the interrelationship between this change and any other previously approved modifications, including changes in type design, will produce no adverse effect upon the airworthiness of that airplane.

3. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

Certification Basis:

--------------------------END---------------------------

## Every issue (2)

- September 12, 2013: Reissued, Current. [certificate](https://openairdocs.org/files/sha256/78/58/7858a74dda2690704af22070c026fecc4552c3480625502b17d48b9b56ed6072)
- July 23, 2013: Issued, Historical. [certificate](https://openairdocs.org/files/sha256/9b/c3/9bc375f115c505e4d02d2d7951e20c76e766d01f7e32133e52d980fac565482b)

---
From OpenAirDocs.org, an independent open copy of FAA data. Only the Federal Register edition on govinfo.gov is the official legal text of an AD.