# STC SA04561NY - Type: Supplemental type certificate - Status: Current, Issued - Holder: Harbour Air Ltd., Canada - Description: Install Part 1 - Harbour Air Ltd. Water Rudder Blade, Pulleys and Fairlead Assemblies - Applied: September 24, 2020 - Status date: November 13, 2020 - Product: Aircraft, Small Airplane - Certification basis: Part 1, Part 21 - Data sheets: [TCDS A-815](https://openairdocs.org/tcds/A-815) - Certificate PDF: https://openairdocs.org/files/sha256/cd/e6/cde64555ab70d6f861415e39ae7b30b22a1ac0f41b2079ce8cd7b6748cd72f14 - FAA DRS: https://drs.faa.gov/browse/excelExternalWindow/65FF93960B1F3E40862586240047C816.0001 - DRS record last changed: December 6, 2025 - Page: https://openairdocs.org/stc/SA04561NY ## ADs that name it (0) None. ## Approved models (1) - Viking Air Limited DHC-3 ([TCDS A-815](https://openairdocs.org/tcds/A-815)) ## What the certificate says Read from the PDF's text layer, without the form's printed wording; the layout is lost and the order can differ. The PDF is the record. FAA Form 8110-2 (10/20) SUPERSEDES PREVIOUS EDITION Page 1 of ___ United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number: Part of . IMPORT SA04561NY Harbour Air Ltd. 4760 Inglis Drive Richmond, British Columbia Canada V7B 1W4 3 the Civil Air Regulations A-815 Viking Air Limited DHC-3 1. Manufacturing of all components must be in accordance with Harbour Air Ltd. Master Drawing List HA1219-MDL, Rev. B, Transport Canada Civil Aviation (TCCA) approved February 3, 2017, or later TCCA approved revision. 2. Install Part 1 - Harbour Air Ltd. Water Rudder Blade, Pulleys and Fairlead Assemblies in accordance (Description of Type Design Change Continued on Page 3 of 3) 1. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission. (Limitations and Conditions Continued on Page 3 of 3) 09/24/2020 11/13/2020 Timothy J. Hadsall Acting Manager, New York ACO Branch Compliance & Airworthiness Division Aircraft Certification Service 3 FAA Form 8110-2 (10/20) SUPERSEDES PREVIOUS EDITION Page 2 of ___ United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number: **IMPORT SA04561NY SA04561NY 3** FAA Form 8110-2 (10/20) SUPERSEDES PREVIOUS EDITION Page ___ of ___ United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate (Continuation Sheet) Number: IMPORT SA04561NY Date of Issuance: November 13, 2020 Description of Type Design Change (continued): with Harbour Air Ltd. Installation Instructions HA12191-1NS, Rev. NI, TCCA approved June 13, 2016, or later TCCA approved revision. 3. Install Part 2 - Harbour Air Ltd. Water Rudder Retraction Modification in accordance with Harbour Air Ltd. Installation Instructions HA12192-1NS, Rev. B, TCCA approved February 3, 2017, or later TCCA approved revision. 4. Maintenance of Part 1 - Harbour Air Ltd. Water Rudder Blade, Pulleys and Fairlead Assemblies to be carried out in accordance with the Instructions for Continued Airworthiness HA12191-ICA, Rev. NI, accepted June 13, 2016, or later TCCA accepted revision. 5. Maintenance of Part 2 - Harbour Air Ltd. Water Rudder Retraction Modification to be carried out in accordance with the Instructions for Continued Airworthiness HA12192-ICA Rev. NI, accepted June 13, 2016, or later TCCA accepted revision. 6. Operation of Part 1 - Harbour Air Ltd. Water Rudder Blade, Pulleys and Fairlead Assemblies to be in accordance with Flight Manual Supplement HA12191-FMS, Rev. NI, TCCA approved June 14, 2016, or later TCCA approved revision. 7. Operation of Part 2 - Harbour Air Ltd. Water Rudder Retraction Modification to be in accordance with Flight Manual Supplement HA12192-FMS Rev. NI, TCCA approved June 14, 2016. 2. The installer must determine whether this design change is compatible with previously approved modifications. 3. This STC is applicable to all serial numbers for this Make and Model. 4. Part 1 - Harbour Air Ltd. Water Rudder Blade, Pulleys and Fairlead Assemblies may only be installed on DHC-3 aircraft equipped with original EDO 55-7170 model floats or any float modified to the 8100-200 configuration under STC SQ01825NY. 5. Part 2 - Harbour Air Ltd. Water Rudder Retraction Modification may be installed on any DHC-3 aircraft equipped with any model EDO floats. ----------END---------- 3 3 ## Every issue (1) - November 13, 2020: Issued, Current. [certificate](https://openairdocs.org/files/sha256/cd/e6/cde64555ab70d6f861415e39ae7b30b22a1ac0f41b2079ce8cd7b6748cd72f14) --- OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain.