# STC SA04712NY

- Type: Supplemental type certificate
- Status: Current, Issued
- Holder: Icarus Aero Inc, Canada
- Description: Manufacture & Installation of External Mount Provisions
- Applied: February 15, 2022
- Status date: February 22, 2022
- Product: Aircraft, Small Airplane
- Certification basis: Part 3, Part 21, Part 21, Part 21, Part 21, Part 21, Part 21, Part 21, Part 21
- Data sheets: [TCDS 3A16](https://openairdocs.org/tcds/3A16)
- Certificate PDF: https://openairdocs.org/files/sha256/49/a3/49a370e4999d2e845fbfcb14d93eaa8edf7603a1a9b6ea5a8e05ca0490f99691
- FAA DRS: https://drs.faa.gov/browse/excelExternalWindow/DRSDOCID155669562520221201195044.0001
- DRS record last changed: December 5, 2025
- Page: https://openairdocs.org/stc/SA04712NY

## ADs that name it (0)

None.

## Approved models (1)

- Textron Aviation Inc. G58 ([TCDS 3A16](https://openairdocs.org/tcds/3A16))

## What the certificate says

Read from the PDF's text layer, without the form's printed wording; the layout is lost and the order can differ. The PDF is the record.

1211 Gravenhurst Parkway Gravenhurst, Ontario Canada P1P 1R1 Part 3/23 the Civil Air Regulations / Title 14 Code of Federal Regulations 3A16 Textron Aviation Inc.

G58

1. Manufacture & Installation of External Mount Provisions must be done in accordance with ICARUS Aero Inc. Installation Drawing IC2018-214-000, Rev. A, Transport Canada Civil Aviation (TCCA) approved January 10, 2022, or later TCCA approved revision.

2. Operation must be done in accordance with ICARUS Aero Inc. Aircraft Flight Manual Supplement FMS2018-214, Rev. NC, TCCA approved July 27, 2018, or later TCCA approved revision.

(Description of Type Design Change Continued on Page 3 of 3)

1. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.

(Limitations and Conditions Continued on Page 3 of 3) February 15, 2022 February 22, 2022

Anthony E. Gallo Manager, International Validation Branch (AIR-730) Compliance & Airworthiness Division Aircraft Certification Service (AIR) 3

Description of Type Design Change (continued):

3. Maintenance must be done in accordance with ICARUS Aero Inc. Instructions for Continued Airworthiness ICA2018-214, Rev. B, dated January 10, 2022, or later TCCA accepted revision.

2. The installer must determine whether this design change is compatible with previously approved modifications.

3. This approval is limited to only the installation made in Textron Aviation Inc., Model G58 Serial No. TH-2288.

4. This approval is limited to the installation of External Mount Provisions Only. The FAA has not certified the equipment for which these provisions are intended. You must get additional FAA approval to install this equipment. The FAA must evaluate the installation to ensure it complies with the applicable airworthiness standards.

----------END---------- 3 3

## Every issue (3)

- February 22, 2022: Issued, Current. [certificate](https://openairdocs.org/files/sha256/49/a3/49a370e4999d2e845fbfcb14d93eaa8edf7603a1a9b6ea5a8e05ca0490f99691)
- February 22, 2022: Issued, Historical. [certificate](https://openairdocs.org/files/sha256/b0/37/b037e6a5ccc7bb5b023870d7ad67a52597f3e0557aea582988a6a6a8daa2ab8b)
- February 22, 2022: Issued, Historical. [certificate](https://openairdocs.org/files/sha256/49/a3/49a370e4999d2e845fbfcb14d93eaa8edf7603a1a9b6ea5a8e05ca0490f99691)

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain.