# STC SA2149CE

- Type: Supplemental type certificate
- Status: Current, Reissued
- Holder: D'Shannon Products Ltd.
- Description: Remove V  tail and install a Beech Model F33A straight tail  per Mike Smith Drawing List Number 35-1013, stamped FAA Approved  with a date of October 24, 1985, or later.  The aircraft are also identified as Models S35TC, V35ST, V35AST, and V35BST by Mike Smith Aero, Inc., with nameplate installed adjacent to the existing nameplate.
- Status date: September 28, 2011
- Data sheets: 3A15, 3A15, 3A15, 3A15
- Certificate PDF: https://openairdocs.org/files/sha256/e3/a4/e3a4287fcd84412b7fa5db1f0bd3c902130841cf241efb4d3feb201c64912d79
- FAA DRS: https://drs.faa.gov/browse/excelExternalWindow/3E6B565C8E0D18D78625792C00702CA8.0001
- Page: https://openairdocs.org/stc/SA2149CE

## ADs that name it

- [AD 94-20-04 R2](https://openairdocs.org/ad/94-20-04-R2): Empennage aft fuselage · Remove V tail and install a Beech Model F33A straight tail (D'Shannon Products STC SA2149CE). Effective Jun 27, 2003. Named in the applicability
- [AD 94-20-04 R1](https://openairdocs.org/ad/94-20-04-R1) (historical): V-tail · Remove V tail and install a Beech Model F33A straight tail (D'Shannon Products STC SA2149CE). Effective Dec 10, 2002. Named in the applicability
- [AD 94-20-04](https://openairdocs.org/ad/94-20-04) (historical): V-Tail Structure · Remove V tail and install a Beech Model F33A straight tail (D'Shannon Products STC SA2149CE). Effective Nov 28, 1994. Named in the applicability

## Approved models (4)

- Hawker Beechcraft Corporation S35 (TCDS 3A15)
- Hawker Beechcraft Corporation V35 (TCDS 3A15)
- Hawker Beechcraft Corporation V35A (TCDS 3A15)
- Hawker Beechcraft Corporation V35B (TCDS 3A15)

## What the certificate says

Read from the PDF's text layer, without the form's printed wording; the layout is lost and the order can differ. The PDF is the record.

This Certificate issued to

Part 3 of the Civil Air Regulations.

Description of Type Design Change: Remove “V” tail and install a Beech Model F33A “straight tail” per Mike Smith Drawing List Number 35-1013, stamped “FAA Approved” with a date of October 24, 1985, or later. The aircraft are also identified as Models S35TC, V35ST, V35AST, and V35BST by Mike Smith Aero, Inc., with nameplate installed adjacent to the existing nameplate.

Limitations and Conditions: 1. Airplane Flight Manual Supplement dated October 24, 1985, or later “FAA Approved” revision required. 2. This approval should not be extended to other specific airplanes of this model on which other previously approved modifications are incorporated, unless it is determined that the interrelationship between this change and any of those other previously approved modifications will introduce no adverse effect upon the airworthiness of that airplane. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

D’Shannon Products, Ltd.

1309 County Road 134 Buffalo, MN 55313 3A15 Make : Beech Model : S35; V35; V35A; V35B Date of application : March 14, 1985

Date of issuance : October 24, 1985

Date reissued : January 26, 1993; September 28, 2011

Date amended : January 22, 1986; December 19, 1986

( Signature) S. Frances Cox Manager, Special Certification Office Southwest Region

( Title)

## Every issue (1)

- September 28, 2011: Reissued, Current. [certificate](https://openairdocs.org/files/sha256/e3/a4/e3a4287fcd84412b7fa5db1f0bd3c902130841cf241efb4d3feb201c64912d79)

---
From OpenAirDocs.org, an independent open copy of FAA data. Only the Federal Register edition on govinfo.gov is the official legal text of an AD.