# STC SA3530NM

- Type: Supplemental type certificate
- Status: Current, Reissued
- Holder: AIM Aviation Inc, United States
- Description: Installation of a class divider and curtain track.
- Applied: June 2, 1986
- Status date: July 5, 2011
- Product: Aircraft, Large Multi-Engine
- Certification basis: Part 21
- Data sheets: [TCDS A3WE](https://openairdocs.org/tcds/A3WE)
- Certificate PDF: https://openairdocs.org/files/sha256/d3/ef/d3ef853dd128ae2d0804cf09bc3c1b95d9dff78c2ca3c5cb088a7c744c8d0e9b
- FAA DRS: https://drs.faa.gov/browse/excelExternalWindow/E2E57446FCBA2B35862579D6006F58EE.0001
- DRS record last changed: December 6, 2025
- Page: https://openairdocs.org/stc/SA3530NM

## ADs that name it (0)

None.

## Approved models (1)

- The Boeing Company 727-200 Series ([TCDS A3WE](https://openairdocs.org/tcds/A3WE))

## What the certificate says

Read from the PDF's text layer, without the form's printed wording; the layout is lost and the order can differ. The PDF is the record.

Number SA3530NM

This certificate, issued to: AIM Aerospace, Inc 705 SW 7th St Renton, WA 98057

Part 4b of the Civil Air Regulations. (See Type Certificate Data Sheet A3WE for complete certification basis.)

Original ProductType Certificate Number: A3WE Make: Boeing Model: 727-200

Description of the Type Design Change: Installation of a class divider and curtain track in accordance with Federal Aviation Administration (FAA) approved KME Drawing List Number KME 4961, Revision G, dated December 30, 1986, or later FAA-approved revisions.

Limitations and Conditions: The approval of this change in type design applies basically to the above model aircraft only. This approval should not be extended to other aircraft of this model on which other previously approved modifications are incorporated unless it is determined that the interrelationship between this change and any other previously approved modifications will introduce no adverse effect upon the airworthiness of that aircraft.

The curtain installation and the resulting interior arrangement, along with the required placarding, has not been evaluated and is not part of this supplemental type certificate (STC). Use of this STC requires incorporation of STC SA1442NM or STC SA2042NM (see Installation Drawing for application). A copy of this certificate and KME Drawing List Number KME 4961 shall be maintained as part of the permanent records for the modified aircraft.

If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

Date of application: June 2, 1986 Date reissued: October 25, 1988; July 5, 2011 Date of issuance: August 13, 1986 Date amended: January 29, 1987

(Signature) Acting Manager, Seattle Aircraft Certification Office (Title)

## Every issue (1)

- July 5, 2011: Reissued, Current. [certificate](https://openairdocs.org/files/sha256/d3/ef/d3ef853dd128ae2d0804cf09bc3c1b95d9dff78c2ca3c5cb088a7c744c8d0e9b)

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain.