# STC SA4132SW

- Type: Supplemental type certificate
- Status: Current, Reissued
- Holder: S-TEC Corporation
- Description: Installation of S-TEC System 60, Single Axis, Automatic Flight Guidance System, Model ST-006
- Status date: November 4, 1981
- Data sheets: 3A15, 3A15
- Certificate PDF: https://openairdocs.org/files/sha256/4f/08/4f086bea23e3dac6c97163b0efcca18f0a93412c220c068f3952a3c0d8785e6b
- FAA DRS: https://drs.faa.gov/browse/excelExternalWindow/9087100C28377AF586257DF80065C403.0001
- Page: https://openairdocs.org/stc/SA4132SW

## ADs that name it

None.

## Approved models (2)

- Beechcraft Corporation 36 (TCDS 3A15)
- Beechcraft Corporation A36 (TCDS 3A15)

## What the certificate says

Read from the PDF's text layer, without the form's printed wording; the layout is lost and the order can differ. The PDF is the record.

mnittd States or America Bepartment of ^transportation—federal 2toiation administration >upplemental t^pe Certificate tyKwmvw' SA4132SW S-TEC Corporation Rt. 4, Bldg. 946 Wolters Industrial Complex Mineral Wells, Texas 76067-9990 ^^ ^s^^i^^ 3 ^5^ Civil Air <-st£&u£a£&n&.

3A15 Beech 36, A36 „. —^—— c«~^. installation of S-TEC System 60, Single Axis, Automatic Flight Guidance System, Model ST-006, according to Bulletin No. 106, Revision 1, dated 8-29-81 and Master Drawing List No. 9207, Revision A, dated 8-29-81, or later FAA approved revision. (14 Volt System) See continuation Sheet, page 2, of this STC.

^ £zdnT*<nt&&a&>r-^jhe' £0 1980 fia&'"fdulMect '.' NOVdnbCr 4, 1981 Revision 1 May 29, 1980 ,. . (Signature)Watson ' * '.cting Chief, Aircraft CertificationDivision (Title)

FAA Fo«M 81 10-2 (10-68)

ttnittd gtatts of America Bepartment of transportation— federal 2ttriation administration Supplemental t^pe Certificate(Continuation &heet) SA4132SW Revision 1 Limitations and Conditions:

1. Pilot's Operating Handbook and FAA Approved Airplane Flight Manual Supplement P/N 8906 dated May 29, 1980, is required with S-TEC System 60 Single Axis Automatic Flight Control System.

2. Pilot's Operating Handbook and FAA Approved Airplane Flight Manual Supplement P/N 8906-1, dated November 4, 1981, is required with S-TEC System 60 Single Axis Automatic Flight Control System (using Roll Servo P/N 0105-R9).

3. Compatibility of this modification with other previously approved modifications must be determined by the installer.

FAA FORM siio-2-1 (10-69) PAGE « OF 2 PAGES

TRANSFER ENDORSEMENT Transfer the ownership of Supplemental Type Certificate Number to (Name oj transferee) (Address of transferee) (Number and street) (City, State, and ^IP code) from (Name of grantor) (Print or type) (Address of grantor) (Number and street) (City, Slate, and %IP cade) Extent of Authority (if licensing agreement):

Signature of grantor (In ink):

## Every issue (1)

- November 4, 1981: Reissued, Current. [certificate](https://openairdocs.org/files/sha256/4f/08/4f086bea23e3dac6c97163b0efcca18f0a93412c220c068f3952a3c0d8785e6b)

---
From OpenAirDocs.org, an independent open copy of FAA data. Only the Federal Register edition on govinfo.gov is the official legal text of an AD.