# STC SE8113SW

- Type: Supplemental type certificate
- Status: Current, Reissued
- Holder: Continental Motors, Inc., United States
- Description: Installation of any or all parts identified by Airmotive drawing/parts application list AEC9109-2.
- Applied: February 27, 1990
- Status date: October 31, 2016
- Product: Engine
- Certification basis: Part 13, Part 21
- Data sheets: [TCDS E-233](https://openairdocs.org/tcds/E-233)
- Certificate PDF: https://openairdocs.org/files/sha256/56/e0/56e059da3d7e9d527bce9f7d663dd7e4ff6abf464e8684564fdb2016e6451308
- FAA DRS: https://drs.faa.gov/browse/excelExternalWindow/69772FE78A46DFFB862580CE0074DB3C.0001
- DRS record last changed: December 6, 2025
- Page: https://openairdocs.org/stc/SE8113SW

## ADs that name it (0)

None.

## Approved models (2)

- Teledyne Continental Motors C75 Series ([TCDS E-233](https://openairdocs.org/tcds/E-233))
- Teledyne Continental Motors C85 Series ([TCDS E-233](https://openairdocs.org/tcds/E-233))

## What the certificate says

Read from the PDF's text layer, without the form's printed wording; the layout is lost and the order can differ. The PDF is the record.

FAA Form 8110-2 (5/14) Page 1 of 3

Number: SE8113SW

Part 13 of the Civil Air Regulations

Original Product – Type Certificate Number: E-233 Make: Continental Motors Inc.

Model: C75 and C85

Installation of any or all parts identified by Airmotive Engineering Drawing/Parts Application List AEC9109-2, dated September 12, 1991, and identified again on page 3 of this STC.

The installer must determine whether this design change is compatible with previously approved modifications. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

Date of Application: February 27, 1990 Date Reissued: 08/27/07; 07/20/15; 01/25/16; 10/31/16 Date of Issuance: September 24, 1991 Date Amended:

Signature

Title James A. Grigg Acting Manager, Fort Worth Aircraft Certification Office, Southwest Region Continental Motors Inc.

2039 S. Broad St.

Mobile, AL 36615

FAA Form 8110-2 (5/14) Page 2 of 3

Transfer the ownership of Supplemental Type Certificate Number: SE8113SW

To (Name and address of transferee)

From (Name and address of grantor)

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate (Continuation Sheet) Number: SE8113SW

FAA Form 8110-2 (5/14) Page 13 of 14

Date of Issuance: September 24, 1991 Date of Reissuance: October 31, 2016

Description of Type Design Change (continued):

Drawing Number & Revision Level Part Name Date

AEC641917 C Cylinder Assembly 06/13/91 AEC65080 E Cylinder Assembly 06/14/91 AEC65315 C Cylinder Head 05/06/91 AEC65316 C New Cylinder Assembly 06/13/91 AEC65314 C New Cylinder Assembly 06/13/91 AEC6477 D Cylinder Head 04/23/91 AEC65317 C Thread & Pilot Dimensions 04/01/91 Cylinder Head AEC65300 C Thread & Pilot Dimensions 04/02/91 Cylinder Head

NOTE: See Application List AEC9109-2, dated September 12, 1991.

-END-

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate (Continuation Sheet) Number: SE8113SW

FAA Form 8110-2 (5/14) Page 13 of 14

## Every issue (1)

- October 31, 2016: Reissued, Current. [certificate](https://openairdocs.org/files/sha256/56/e0/56e059da3d7e9d527bce9f7d663dd7e4ff6abf464e8684564fdb2016e6451308)

---
From OpenAirDocs.org, an independent open copy of FAA and NTSB data. Only the Federal Register edition on govinfo.gov is the official legal text of an AD.