# STC SH1216EA

- Type: Supplemental type certificate
- Status: Current, Reissued
- Holder: 1592686 Ontario Inc, Canada
- Description: Installation of Wescam camera pod.
- Applied: November 28, 1980
- Status date: April 13, 2004
- Product: Aircraft, Rotorcraft
- Certification basis: Part 21
- Data sheets: [TCDS H2SW](https://openairdocs.org/tcds/H2SW)
- Certificate PDF: https://openairdocs.org/files/sha256/96/84/96844442aaf652bf1d455e666d8a6a949767e8fed3a5b5496f58d8d98872c439
- FAA DRS: https://drs.faa.gov/browse/excelExternalWindow/A71E827E6FA44FB6862571B2006D8F56.0001
- DRS record last changed: December 6, 2025
- Page: https://openairdocs.org/stc/SH1216EA

## ADs that name it (0)

None.

## Approved models (2)

- Bell Helicopter Textron (Canada) 206A ([TCDS H2SW](https://openairdocs.org/tcds/H2SW))
- Bell Helicopter Textron (Canada) 206B ([TCDS H2SW](https://openairdocs.org/tcds/H2SW))

## What the certificate says

Read from the PDF's text layer, without the form's printed wording; the layout is lost and the order can differ. The PDF is the record.

1016C Sutton Drive, Unit #8 Burlington, Ontario Canada L7L 6B8

Part 6 of the Civil Air Regulations.

Original Product --Type Certificate Number: H2SW Make : Bell

Model : 206A, 206B

Installation of Wescam Camera Pod.

1. Configuration 1: 32” or 45” Diameter Camera Pod:

a) Installation must be in accordance with Istec Limited Drawing No. 200C010, Rev. B and Istec Limited Instructions for Installation of Wescam Camera Pod dated November 21, 1980.

b) Transport Canada approved Istec Limited Flight Manual Supplement dated May 3, 1992 is required.

Date of application : November 28, 1980

Date of issuance : December 24, 1980 Date reissued : September 9, 1996, April 13, 2004

Date amended : June 8, 1992

( Signature) Anthony Socias Manager New York Aircraft Certification Office

(Title)

FAA Form 8110-2-1(10-69) Page 2 of 2

Number SH1216EA Date of Reissuane: April 13, 2004

2. Configuration 2: 12”, 24”, 32”, 36” or 45” Diameter Camera Pod:

a. Installation must be in accordance with Field Aviation Drawing List No. 33643, Issue 1 dated July 18, 1991 or later Transport Canada approved revisions, and Field Aviation Instructions for Installation of Wescam Camera Pod dated July 1991.

b. Field Aviation Flight Manual Supplement P/N FACi-6678-01, Rev. 1, Transport Canada approved March 16, 1992, or later Transport Canada approved revisions is required.

3. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

4. Compatibility of this design change with previously approved modifications must be determined by the installer.

…..END…..

## Every issue (1)

- April 13, 2004: Reissued, Current. [certificate](https://openairdocs.org/files/sha256/96/84/96844442aaf652bf1d455e666d8a6a949767e8fed3a5b5496f58d8d98872c439)

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain.