# STC SH597NE

- Type: Supplemental type certificate
- Status: Current, Reissued
- Holder: 1592686 Ontario Inc, Canada
- Description: Installation of Wescom camera mount.
- Applied: September 3, 1987
- Status date: April 13, 2004
- Product: Aircraft, Rotorcraft
- Certification basis: Part 21, Part 27
- Data sheets: [TCDS H11EU](https://openairdocs.org/tcds/H11EU)
- Certificate PDF: https://openairdocs.org/files/sha256/70/f4/70f4f844ad83a71996be469e65b22e16934405335461c668318df3d4a562e88e
- FAA DRS: https://drs.faa.gov/browse/excelExternalWindow/38B79CD6727F7161862571B2006D3ADE.0001
- DRS record last changed: December 6, 2025
- Page: https://openairdocs.org/stc/SH597NE

## ADs that name it (0)

None.

## Approved models (4)

- Eurocopter France AS355E ([TCDS H11EU](https://openairdocs.org/tcds/H11EU))
- Eurocopter France AS355F ([TCDS H11EU](https://openairdocs.org/tcds/H11EU))
- Eurocopter France AS355F1 ([TCDS H11EU](https://openairdocs.org/tcds/H11EU))
- Eurocopter France AS355F2 ([TCDS H11EU](https://openairdocs.org/tcds/H11EU))

## What the certificate says

Read from the PDF's text layer, without the form's printed wording; the layout is lost and the order can differ. The PDF is the record.

1016C Sutton Drive, Unit #8 Burlington, Ontario Canada L7L 6B8

Part 27 of the Federal Aviation Regulations.

Original Product --Type Certificate Number: H11EU Make : Aerospatiale (Societe National Industrielle Aerospatiale)

Model : AS 355E, AS 355F, AS 355F1, AS 355F2

Installation of Wescam Camera Mount in accordance with the following:

1. For the Wescam Mount 104 with 32” diameter dome, the installation is to be in accordance with:

a. Istec Limited Drawing 200D060, Rev. B, dated June 5, 1987, and Istec Ltd. Installation Instructions 104/355 dated November 21, 1986, for AS 355 series helicopters or,

b. Istec Ltd. Drawing No. 200D060, Rev. C, dated November 24, 1987, and Istec Ltd. Installation Instructions 104/355 dated November 27, 1987, for AS 355 series helicopters.

The Canadian Department of Transport approved Flight Manual Supplement apples for the installations as numbered above:

1. a. Flight Manual Supplement No. 104/355 dated March 19, 1987

b. Flight Manual Supplement No. 104/355 dated March 19, 1987

Date of application : September 3. 1987

Date of issuance : August 9, 1988 Date reissued : September 9, 1996, April 13, 2004

Date amended : May 30, 1990, October 28, 1992, May 25, 1995

( Signature) Anthony Socias Manager New York Aircraft Certification Office

(Title)

FAA Form 8110-2-1(10-69) Page 2 of 2

Number SH597NE Date of Reissuane: April 13, 2004

Description of Type Design Change (Continued):

2. For the Wescam Mount 104 with 24”, 32”, or 36” diameter dome, the installation is to be in accordance with:

a. Istec Ltd. Drawing No. 200D060, Rev. D, dated August 1, 1989, and Istec Inc. Installation Instructions 104/355 dated October 10, 1989, or

b. Istec Ltd. Drawing No. 200D060, Rev. E dated February 19, 1990, and Istec Inc. Installation Instructions 104/355 dated February 15, 1990.

c. Istec Ltd. Drawing No. 200D060, Rev. E, dated February 19, 1990, and Istec Inc. Installation Instructions 104/355 dated February 15, 1990

d. Istec Ltd. Drawing No. 200DO06, Rev. F, dated June 10, 1993, and Istec Inc. Installation Instructions 104/355 dated February 15, 1990.

2. a. Flight Manual Supplement No. 104/355 Amendment 1, dated November 1, 1989.

b. Flight Manual Supplement No. 104/355 Amendment 2, dated March 12, 1990, or Amendment 3, dated April 20, 1990.

c. Flight Manual Supplement No. 104/355 Revision 4, dated May 29, 1992

d. Flight Manual Supplement No. 104/355 Revision 5, dated December 9, 1993.

Installation 1a, 1b, 2a and 2b are approved for use with:

a. High skid landing gear.

b. Any skis approved for use on the AS 355 series helicopters

c. Rear view mirror.

Installation 2c and 2d are approved for use with:

a. High or low skid landing gear.

b. Any skis approved for an AS 355 series helicopters

c. Rear view mirror.

3. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

4. Compatibility of this design change with previously approved modifications must be determined by the installer.

…..END…..

## Every issue (1)

- April 13, 2004: Reissued, Current. [certificate](https://openairdocs.org/files/sha256/70/f4/70f4f844ad83a71996be469e65b22e16934405335461c668318df3d4a562e88e)

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain.