# STC SR00780DE

- Type: Supplemental type certificate
- Status: Current, Issued
- Holder: Laz-Tec, LLC, United States
- Description: Installation of  Tail Rotor Pedal Removal Kit
- Applied: November 22, 2013
- Status date: November 7, 2014
- Product: Aircraft, Rotorcraft
- Certification basis: Part 21, Part 27
- Data sheets: [TCDS R00003RD](https://openairdocs.org/tcds/R00003RD)
- Certificate PDF: https://openairdocs.org/files/sha256/b3/3e/b33e8010dfb4771041b458feda386833ffba7d4ec0cbf77dfd9fa705041f8398
- FAA DRS: https://drs.faa.gov/browse/excelExternalWindow/41A7221BE2BC41F486257D9300758ACF.0001
- DRS record last changed: December 6, 2025
- Page: https://openairdocs.org/stc/SR00780DE

## ADs that name it (0)

None.

## Approved models (1)

- Bell Helicopter Textron Canada Limited 429 ([TCDS R00003RD](https://openairdocs.org/tcds/R00003RD))

## What the certificate says

Read from the PDF's text layer, without the form's printed wording; the layout is lost and the order can differ. The PDF is the record.

United States of America Department of Transportation_Federal Aviation Administration Supplemental Type Certificate N umber SR00780DE This certificate, issued to Laz-Tec, LLC 5500 Spur cross Trail Parker, Colorado 80134 certifies t hat the change in the type design for the following product with the limitations and conditions therefor as specified hereon meets the airworthiness requirements of P art 27* of th e F ederal A viation R egulations . *Certification Basis is set forth in Type Certificate Data Sheet R00003RD Original Product Type Certificate N umber: R00003RD M ake: Bell Helicopter Textron M odel: 429 Description of the Type Design Change:

Installation of Tail Rotor Pedal Removal Kit in accordance with Laz-Tec Drawing List, Report No. LT-13205, No Revision, dated March 20, 2014, FAA approved November 07, 2014, or later FAA approved revisions.

1. FAA accepted Instructions for Continued Airworthiness, Laz-Tec, LLC Document No. LT-13202, No Revision, dated May 30, 2014, FAA accepted June 02, 2014, or later FAA accepted revision is required.

2. Compatibility of this design change with previously approved modifications must be determined by the installer.

3. If the STC holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

Date of application: November 22, 2013 Date reissued:

Date of issuance: November 07, 2014 Date amended:

(Signature) Todd G. Dixon, Manager Denver Aircraft Certification Office Northwest Mountain Region (Title)

## Every issue (1)

- November 7, 2014: Issued, Current. [certificate](https://openairdocs.org/files/sha256/b3/3e/b33e8010dfb4771041b458feda386833ffba7d4ec0cbf77dfd9fa705041f8398)

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain.