# STC SR01210NM

- Type: Supplemental type certificate
- Status: Current, Reissued
- Holder: Aerometals, United States
- Description: Fabrication of AMC AM369D23670 horizontal stabilizer tip plates in accordance with AMC Master Drawing List No. AMC-004, Revision C, dated March 25, 2003, or later Federal Aviation Administration (FAA) approved revision.  The tip plates must be installed in accordance with AMC Installation Instructions MI-02001, Revision IR, dated November 6, 2002, or later FAA approved revision
- Applied: September 5, 2002
- Status date: March 1, 2005
- Product: Aircraft, Rotorcraft
- Certification basis: Part 21
- Data sheets: [TCDS H3WE](https://openairdocs.org/tcds/H3WE)
- Certificate PDF: https://openairdocs.org/files/sha256/89/b0/89b037c2547b3c9839c973afd2fde4c7fed44cee8376dd80f2b1b335e5b1a36e
- FAA DRS: https://drs.faa.gov/browse/excelExternalWindow/00901E0FFA1BB8FE86256FBF006E5455.0001
- DRS record last changed: December 6, 2025
- Page: https://openairdocs.org/stc/SR01210NM

## ADs that name it (0)

None.

## Approved models (1)

- MD Helicopter Inc. 369D ([TCDS H3WE](https://openairdocs.org/tcds/H3WE))

## What the certificate says

Read from the PDF's text layer, without the form's printed wording; the layout is lost and the order can differ. The PDF is the record.

United States of America Department of Transportation_Federal Aviation Administration Supplemental Type Certificate Number SR01210NM

This certificate, issued to Aerometals 3920 Sandstone Drive El Dorado Hills, CA 95762 Part 6 of the Civil Air Regulations.

Original ProductType Certificate Number: H3WE Make: MD Helicopters Inc (MDHI) Model: 369D

Description of the Type Design Change: Fabrication of AMC AM369D23670 horizontal stabilizer tip plates in accordance with AMC Master Drawing List No. AMC-004, Revision C, dated March 25, 2003, or later Federal Aviation Administration (FAA) approved revision. The tip plates must be installed in accordance with AMC Installation Instructions MI-02001, Revision IR, dated November 6, 2002, or later FAA approved revision

Limitations and Conditions: Approval of this change in type design applies to the rotorcraft model listed above only. This approval should not be extended to other rotorcraft of this model on which other previously approved modifications are incorporated unless it is determined that the relationship between this change and any of those other previously approved modifications, including changes in type design, will introduce no adverse effect upon the airworthiness of that rotorcraft. A copy of this Certificate must be maintained as part of the permanent record of the modified rotorcraft.

This is a direct replacement part, and the FAA has determined that no Instructions for Continued Airworthiness are required.

If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

Date of application: September 5, 2002 Date reissued: March 1, 2005 Date of issuance: May 9, 2003 Date amended:

(Signature) Acting Manager, Seattle Aircraft Certification Office (Title)

## Every issue (1)

- March 1, 2005: Reissued, Current. [certificate](https://openairdocs.org/files/sha256/89/b0/89b037c2547b3c9839c973afd2fde4c7fed44cee8376dd80f2b1b335e5b1a36e)

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain.