# STC SR01996SE

- Type: Supplemental type certificate
- Status: Current, Reissued
- Holder: Aerometals, United States
- Description: Fabrication and installation of an oil tank filler cap assembly in the above model rotor craft
- Applied: December 22, 2008
- Status date: September 1, 2009
- Product: Aircraft, Rotorcraft
- Certification basis: Part 21
- Data sheets: [TCDS H3WE](https://openairdocs.org/tcds/H3WE)
- Certificate PDF: https://openairdocs.org/files/sha256/42/6c/426cb76f24ca9846db98625a5bca28c17a9c61fc30f230a055931d3172b4d3bd
- FAA DRS: https://drs.faa.gov/browse/excelExternalWindow/999804A78A186ECA86257632006D3C67.0001
- DRS record last changed: December 6, 2025
- Page: https://openairdocs.org/stc/SR01996SE

## ADs that name it (0)

None.

## Approved models (9)

- MD Helicopter Inc. 369A ([TCDS H3WE](https://openairdocs.org/tcds/H3WE))
- MD Helicopter Inc. 369D ([TCDS H3WE](https://openairdocs.org/tcds/H3WE))
- MD Helicopter Inc. 369E ([TCDS H3WE](https://openairdocs.org/tcds/H3WE))
- MD Helicopter Inc. 369FF ([TCDS H3WE](https://openairdocs.org/tcds/H3WE))
- MD Helicopter Inc. 369HE ([TCDS H3WE](https://openairdocs.org/tcds/H3WE))
- MD Helicopter Inc. 369HM ([TCDS H3WE](https://openairdocs.org/tcds/H3WE))
- MD Helicopter Inc. 369HS ([TCDS H3WE](https://openairdocs.org/tcds/H3WE))
- MD Helicopter Inc. 500N ([TCDS H3WE](https://openairdocs.org/tcds/H3WE))
- MD Helicopter Inc. 600N ([TCDS H3WE](https://openairdocs.org/tcds/H3WE))

## What the certificate says

This is OCR from the scanned FAA certificate. OCR can misread letters and numbers.

Thrited Bates of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number: SR01996SE This certificate issued to: Aerometals 3920 Sandstone Drive El Dorado Hills, CA 95762 Part 6 of the Civil Air Regulations or Part 27 of the Federal Aviation Regulations.

Original Product -Type Certificate Aumber: H3WE Make: MD Helicopters, Inc.

Model: [CAR 6] 369A, 369HM, 369HS, 369HE, 369D, 369E, 369FF, 500N [FAR 27] 600N Description of Type Design Change: Fabrication and installation of an oil tank filler cap assembly in the above model rotorcraft in accordance with Aircraft Manufacturing company (AMC) Master Drawing List number (No.) MDL-AMC-035, Revision A, dated February 18, 2009, or later FAA-approved revisions to this document.

Limitations and Conditions: Approval of this change in type design applies to the above aircraft model only This approval should not be extended to other aircraft of this model series unless the installer determines that the relationship between this change and any other previously incorporated approved modifications will introduce no adverse effect upon the airworthiness of that aircraft.

A copy of this Certificate must be maintained as part of the permanent records for the modified aircraft If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission

Date of Application: October 22, 2008 Date mission: September 01, 2009 Date of Issuance: May 08, 2009 Date Amended:

EDERA A VIATION By Direction of the Administrator / 7

TOMNS Y RA TOR (Signature) Acting Manager, Seattle Aircraft Certification Office (Tule)

47.

**FAA FORM S1 10-2-1 (10-69)**

## Every issue (2)

- September 1, 2009: Reissued, Current. [certificate](https://openairdocs.org/files/sha256/42/6c/426cb76f24ca9846db98625a5bca28c17a9c61fc30f230a055931d3172b4d3bd)
- May 8, 2009: Issued, Historical. [certificate](https://openairdocs.org/files/sha256/28/10/2810f16faaa34d034043f069dece8b08ef3f33dd49602fbeb4ff5f01f9d9d264)

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain.