# STC SR03833NY

- Type: Supplemental type certificate
- Status: Current, Reissued
- Holder: DECA Aviation Engineering Limited, Canada
- Description: Installation of Structural Provisions for Survey Equipment
- Applied: May 26, 2016
- Status date: December 21, 2016
- Product: Aircraft, Rotorcraft
- Certification basis: Part 1, Part 21
- Data sheets: [TCDS H2SW](https://openairdocs.org/tcds/H2SW)
- Certificate PDF: https://openairdocs.org/files/sha256/2f/53/2f539d5c68ecdb4d123d1c5aad477835009229debab7e6fd753e1a16fe29ebbe
- FAA DRS: https://drs.faa.gov/browse/excelExternalWindow/FF510B70931D98F28625809100671446.0001
- DRS record last changed: December 6, 2025
- Page: https://openairdocs.org/stc/SR03833NY

## ADs that name it (0)

None.

## Approved models (4)

- Bell Helicopter Textron Canada Limited 206B ([TCDS H2SW](https://openairdocs.org/tcds/H2SW))
- Bell Helicopter Textron Canada Limited 206L ([TCDS H2SW](https://openairdocs.org/tcds/H2SW))
- Bell Helicopter Textron Canada Limited 206L-1 ([TCDS H2SW](https://openairdocs.org/tcds/H2SW))
- Bell Helicopter Textron Canada Limited 206L-3 ([TCDS H2SW](https://openairdocs.org/tcds/H2SW))

## What the certificate says

Read from the PDF's text layer, without the form's printed wording; the layout is lost and the order can differ. The PDF is the record.

FAA Form 8110-2 (5/14) Page 1 of

Part of the

Signature

Title SR03833NY DECA Aviation Engineering Limited 200-7050 Telford Way Mississaugua, Ontario Canada L5S 1V7 Civil Air / Federal Aviation Regulations.

6/27

1. Installation of Structural Provisions for Survey Equipment in accordance with DECA Aviation Engineering Limited Modification Summary, document number MS08208 revision 4, dated April 1, 2016, Transport Canada approved April 1, 2016, or later Transport Canada approved revision.

2. Instructions for Continued Airworthiness described in DECA Aviation Engineering Limited Instructions for Continued Airworthiness MMS08208 revision 3, Transport Canada accepted March 31, 2016, or later Transport Canada accepted revisions are required for this installation.

(See Description of Type Design Change Continued on Page 3 of 3)

1. Placards to be in accordance with Section 1 of DECA Aviation Engineering Limited, FMS 14024 revision 1, Transport Canada approved March 31, 2016 or later Transport Canada approved revision.

2. Prerequisite listed in Modification Summary, document number MS08208 revision 4 Section 1.1.4. are required with this installation.

3. The installer must determine whether this design change is compatible with previously approved modifications.

4. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.

Mazdak Hobbi Acting Manager New York Aircraft Certification Office Bell 206B, 206L, 206L-1, 206L-3 December 21, 2016 May 26, 2016 November 18, 2016 IMPORT H2SW 3

FAA Form 8110-2 (5/14) Page 2 of

To (Name and address of transferee)

From (Name and address of grantor)

3 SR03833NY

FAA Form 8110-2 (5/14) Page 3 of

3 Date Reissued: December 21, 2016

Description of Type Design Change (continued):

3. Operation to be in accordance with DECA Aviation Engineering Limited FMS 14024 revision 1, Transport Canada approved March 31, 2016 or later Transport Canada approved revision.

----------END---------- SR03833NY

## Every issue (2)

- December 21, 2016: Reissued, Current. [certificate](https://openairdocs.org/files/sha256/2f/53/2f539d5c68ecdb4d123d1c5aad477835009229debab7e6fd753e1a16fe29ebbe)
- November 18, 2016: Issued, Historical. [certificate](https://openairdocs.org/files/sha256/15/60/1560acaf317208f0ba6135dcd5bb6877600c0f33f12733f237b48f594fa298e1)

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain.