# STC ST00016MC

- Type: Supplemental type certificate
- Status: Current, Issued
- Holder: Boeing Derivative Airplane Programs, United States
- Description: Installation of replacement ovens in G1B and G4B Galley areas. **Note: Only for 757-2G4
- Applied: February 5, 2008
- Status date: June 17, 2008
- Product: Aircraft, Large Multi-Engine
- Certification basis: Part 21, Part 25
- Data sheets: [TCDS A2NM](https://openairdocs.org/tcds/A2NM)
- Certificate PDF: https://openairdocs.org/files/sha256/c0/e2/c0e23ae4b3690943d47a2630c088a0a381be1d29e59198738c5d4abba010ecda
- FAA DRS: https://drs.faa.gov/browse/excelExternalWindow/F61F118DF88256358625747200646E1D.0001
- DRS record last changed: December 5, 2025
- Page: https://openairdocs.org/stc/ST00016MC

## ADs that name it (0)

None.

## Approved models (1)

- The Boeing Company 757-200 Series ([TCDS A2NM](https://openairdocs.org/tcds/A2NM))

## What the certificate says

Read from the PDF's text layer, without the form's printed wording; the layout is lost and the order can differ. The PDF is the record.

FAA FORM 8110-2(10-68) Number ST00016MC This certificate issued to:

Part 25* of the Federal Aviation Regulations.

Original Product Type Certificate Number : A2NM

Installation of replacement ovens in G1B and G4B Galley areas in accordance with Master Data List, Document Number D706-00002-1, Revision B, dated June 9, 2008, FAA approved June 16, 2008, or later FAA approved revision.

1.) Compatibility of this design change with previous ly approved modifications must be determined by the installer.

2.) FAA accepted Instructions for Continued Airw orthiness and updated information for the Boeing Illustrated Parts Catalog for replacement ovens installed by this STC must be incorporated in the Boeing Model 757-2G4 manuals at time of installation.

3.) If the holder agrees to permit another person to us e this certificate to alter the product, the holder shall give the other person written evidence of the permission.

4.) No Airplane Flight Manual Supplement is issued or required for this modification.

5.) *In accordance with CFR Title 14 Section 21.101, compliance to later amendment levels for specific Part 25 regulations affected by this STC modification has been shown than exist in the original aircraft certification basis. The certification basis for this STC is documented for amendment levels to applicable regulations in Table 1 of Project Specific Certification Plan DAP-PSCP08-001, Rev New, dated February 4, 2008 and accepted by the FAA on February 25, 2008.

Boeing Derivative Airplane Programs IDS Bldg 9-96 9725 East Marginal Way South Tukwila, Washington 98108

Make : Boeing 757-2G4 Model :

Date of application : February 5, 2008

Date of issuance : June 17, 2008

( Signature) Ronald K. Rathgeber Manager Military Certification Office

( Title)

The FAA will reissue the certificate in the name of the transferee and forward it to him.

Transfer the ownership of the Supplemental Type Certificate Number

to (Name of transferee) (Address of transfer) (Number and street)

(City, State, and Zip code) from (Name of grantor) (Print or type) (Address of grantor) (Number and street)

(City, State, and Zip code) Extent of Authority (if licensing agreement):

Signature of grantor (In ink):

## Every issue (1)

- June 17, 2008: Issued, Current. [certificate](https://openairdocs.org/files/sha256/c0/e2/c0e23ae4b3690943d47a2630c088a0a381be1d29e59198738c5d4abba010ecda)

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain.