# STC ST09806AC

- Type: Supplemental type certificate
- Status: Current, Amended
- Holder: SJT Aerospace Corporation, United States
- Description: The structural considerations shall include the installation of metallic beams to support mounting various interior components.
- Applied: September 18, 2012
- Status date: July 2, 2015
- Product: Aircraft, Large Airplane
- Certification basis: Part 21
- Data sheets: [TCDS A16WE](https://openairdocs.org/tcds/A16WE)
- Certificate PDF: https://openairdocs.org/files/sha256/5b/3e/5b3eb564a4f1de22aa443bdaecd658324dbdfc7b5c73ac63b53ee2f81fbf893f
- FAA DRS: https://drs.faa.gov/browse/excelExternalWindow/582F121B79B83D1586257F8100532FB7.0001
- DRS record last changed: December 6, 2025
- Page: https://openairdocs.org/stc/ST09806AC

## ADs that name it (0)

None.

## Approved models (1)

- The Boeing Company 737-700 Series ([TCDS A16WE](https://openairdocs.org/tcds/A16WE))

## What the certificate says

Read from the PDF's text layer, without the form's printed wording; the layout is lost and the order can differ. The PDF is the record.

FAA Form 8110-2 (5/14) Page 1 of

Part of the

Signature

Title 3 ST09806AC SJT Aerospace Corporation 16517 E 122nd St. N Collinsville OK 74021 Federal Aviation Regulations 25 Configuration -001: Structural considerations to include the installation of metallic beams to support mounting various interior components. Modification of the aircraft to be accomplished in accordance with Sturctures Data List SJT-DL-B737-1, Revision IR, dated June 11, 2013, or later FAA approved revision. This installation must be maintained in accordance with SJT Aerospace Instructions for Continued Airworthiness SJT-ICA-B737-1, Rev. IR, dated March 21, 2013, or later FAA accepted revision.

Compatibility of this design change with previously approved modifications must be determined by the installer. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

Scott A. Horn Manager, Fort Worth Aircraft Certification Office Southwest Region Boeing 737-700IGW

July 2, 2015 September 18, 2012 July 10, 2013 A16WE

FAA Form 8110-2 (5/14) Page 2 of

To (Name and address of transferee)

From (Name and address of grantor)

3 ST09806AC

FAA Form 8110-2 (5/14) Page 3 of

3 Configuration -002: Structural considerations to include the installation of metallic beams to support mounting various interior components. Modification of the aircraft to be accomplished in accordance with Structures Data List SJT-DL-B737-3, Revision IR, dated June 1, 2015 or later FAA approved revision. This installation must be maintained in accordance with SJT Aerospace Instructions for Continued Airworthiness SJT-ICA-B737-2, Rev. IR, dated February 25, 2015, or later FAA accepted revision.

-END-

ST09806AC

## Every issue (2)

- July 2, 2015: Amended, Current. [certificate](https://openairdocs.org/files/sha256/5b/3e/5b3eb564a4f1de22aa443bdaecd658324dbdfc7b5c73ac63b53ee2f81fbf893f)
- July 10, 2013: Issued, Historical. [certificate](https://openairdocs.org/files/sha256/f7/70/f770e4aaa601490a76daf08ac6cd7e53f9a9ff406ce44860f4a027a528499f26)

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain.