# STCs approved under this data sheet: TCDS A-2-582 A list on [TCDS A-2-582](https://openairdocs.org/tcds/A-2-582.md). Current certificates first, most recently changed first. Page 1 of 2 · 67 STCs - [STC SA04652CH](https://openairdocs.org/stc/SA04652CH.md): To allow use of 100R grade aviation fuel meeting Swift Fuel, LLC specification · Swift Fuels LLC - [STC SA4503NM](https://openairdocs.org/stc/SA4503NM.md): Remove original cloth covering and install Ceconite covering · Ceconite Division of Poly-Fiber Inc. - [STC SA01967WI](https://openairdocs.org/stc/SA01967WI.md): Use of GAMI G100UL High Octane Unleaded Avgas · General Aviation Modifications Inc. - [STC SA04776NY](https://openairdocs.org/stc/SA04776NY.md): The HIPEC Covering and Finishing System must be performed and maintained · HIPEC Aircraft Coatings Inc. - [STC SA5190NM](https://openairdocs.org/stc/SA5190NM.md): Installation of Gustin Aviation chip detector light system. · A & L Aircraft Parts Inc - [STC SA6070NM](https://openairdocs.org/stc/SA6070NM.md): Installation of a 'quick-disconnect drain plug' on the engine rocker sump for the oil drain retrieval system after engine shutdown. · West Coast Air Creations - [STC SA01282NY](https://openairdocs.org/stc/SA01282NY.md): Installation of Airwolf remote mounted engine oil filter kit AFC-K015 on aircraft powered by Pratt & Whitney radial reciprocating engine Series R-985, R-1340 and R-1830. · Airwolf Filter Corporation - [STC SA02930NY](https://openairdocs.org/stc/SA02930NY.md): Installation of Insight Instrument Corporation Graphic Engine Monitor (GEM 610C) models G3, G2, and G1 and 1200C model G4 as primary Cylinder Head Temperature (CHT), Exhaust Gas Temperature (EGT), and Turbine Inlet Temperature (TIT) Instruments · Insight Instrument Corporation - [STC SA3-86](https://openairdocs.org/stc/SA3-86.md): RCA AVQ-50 radar antenna mount installation · Sabreliner Aviation LLC - [STC SA2-433](https://openairdocs.org/stc/SA2-433.md): Installation of a carburetor air induction system. · BlackHawk Aircraft Maintenance Inc. - [STC SA1708WE](https://openairdocs.org/stc/SA1708WE.md): Removal of cargo door (approved under STC SA995WE) to permit aircraft to engage in special operations such as aerial photography, parachute jumping, etc. · SOUTHWESTERN AERO EXCHANGE INC. - [STC SA2-1230](https://openairdocs.org/stc/SA2-1230.md): Installation of extended tail wheel assembly. · Staggerwing Museum Foundation Inc. - [STC SA2-1261](https://openairdocs.org/stc/SA2-1261.md): Install Fiberglas bubble tail wheel enclosure doors (enclosing entire wheel). · Staggerwing Museum Foundation Inc. - [STC SA2-204](https://openairdocs.org/stc/SA2-204.md): Installation of one-peice windshield and flush cockpit side-windows. · Staggerwing Museum Foundation Inc. - [STC SA2-213](https://openairdocs.org/stc/SA2-213.md): Installation of modified wing tips. · Staggerwing Museum Foundation Inc. - [STC SA2-328](https://openairdocs.org/stc/SA2-328.md): Installation of Hartzell propeller unfeathering crossfeed system. · Staggerwing Museum Foundation Inc. - [STC SA2-523](https://openairdocs.org/stc/SA2-523.md): Revise horizontal stabilizer angle of incidence from -3.6 degrees to-0.5 degrees. · Staggerwing Museum Foundation Inc. - [STC SA2-725](https://openairdocs.org/stc/SA2-725.md): Installation of oil cooler, G & O Mfg. Co. #E703, modified with Fullerton Syphon DV5 thermostat. · Staggerwing Museum Foundation Inc. - [STC SA249SO](https://openairdocs.org/stc/SA249SO.md): Increase in takeoff weight to10,200 lbs. and landing weight to9,800 lbs. and extension of aft C.G. limit to (+120.5) at 10,200 lbs. (Model may also be designated as Conrad 10,200.) · Staggerwing Museum Foundation Inc. - [STC SA4-120](https://openairdocs.org/stc/SA4-120.md): Dual airspeed system. · Staggerwing Museum Foundation Inc. - [STC SA4-128](https://openairdocs.org/stc/SA4-128.md): Engines, propellers, revised nacelles, wheel-well doors, air- speed system, fuel system and elevator seal strips. · Staggerwing Museum Foundation Inc. - [STC SA4-21](https://openairdocs.org/stc/SA4-21.md): Fuel system modified to provide dual wobble pumps and suction crossfeed and attendant plumbing. · Staggerwing Museum Foundation Inc. - [STC SA4-34](https://openairdocs.org/stc/SA4-34.md): Main landing gear door. · Staggerwing Museum Foundation Inc. - [STC SA4-1069](https://openairdocs.org/stc/SA4-1069.md): Remove original Arens controls and lock mechanism for left and right cowl flaps and replace with electronic actuators, control switches, and indicator. · SOUTHWESTERN AERO EXCHANGE INC. - [STC SA4-855](https://openairdocs.org/stc/SA4-855.md): Addition of windows in cabin. · SOUTHWESTERN AERO EXCHANGE INC. - [STC SA4-1198](https://openairdocs.org/stc/SA4-1198.md): Aft bulkhead removal. · Staggerwing Museum Foundation Inc. - [STC SA1145WE](https://openairdocs.org/stc/SA1145WE.md): Installation of cargo door in fuselage. · Staggerwing Museum Foundation Inc. - [STC SA1151CE](https://openairdocs.org/stc/SA1151CE.md): Install crack detection system. · Staggerwing Museum Foundation Inc. - [STC SA3987WE](https://openairdocs.org/stc/SA3987WE.md): Increase in takeoff gross weight to 9, 465 pounds and installation of wing spar reinforcement, modified tail wheel fork and truss assembly, metal covered control surfaces, and rectangular windows for installation on model AT-11, serial numbers 41-9486 and 6501. · Staggerwing Museum Foundation Inc. - [STC SA565WE](https://openairdocs.org/stc/SA565WE.md): Installation of wing tips per FAA Sealed Drawing No s. ASP-2029 and API-2030. · SOUTHWESTERN AERO EXCHANGE INC. - [STC SA3021WE](https://openairdocs.org/stc/SA3021WE.md): Installation of wing spar reinforcement. · Vintage Aircraft - [STC SA1581SW](https://openairdocs.org/stc/SA1581SW.md): Center section main wing spar reinforcement. · Sierra Industries, Inc - [STC SA1582SW](https://openairdocs.org/stc/SA1582SW.md): Outer wing panel spar reinforcement · Sierra Industries, Inc - [STC SA2-760](https://openairdocs.org/stc/SA2-760.md): Seating installations. · Aviation Fabricators Inc - [STC SA2-780](https://openairdocs.org/stc/SA2-780.md): Installation of seating accommodations for 5, 6, 7, 8, or 9 passengers. · Aviation Fabricators Inc - [STC SA485WE](https://openairdocs.org/stc/SA485WE.md): Installation of metal covering on elevator, ailerons, rudder and flaps respectively. · Rocky Ford Aero - [STC SA1935CE](https://openairdocs.org/stc/SA1935CE.md): Operation of airplane on unleaded automotive gasoline, 87 minimum antiknock index and leaded automotive gasoline, minimum antiknock index. · Petersen Aviation Inc - [STC SA1351WE](https://openairdocs.org/stc/SA1351WE.md): Replace existing fabric on wings, fuselage, empennage, and/or control surfaces, with Ceconite101 material. (262A Series -12) · Ceconite Inc - [STC SA40NE](https://openairdocs.org/stc/SA40NE.md): Replace single AT-11 fuel tank selector valve with two fuel tank selector valves and replace pressure crossfeed fuel valve with a suction crossfeed valve. · Aero Marine Surveys, Inc - [STC SA4-1210](https://openairdocs.org/stc/SA4-1210.md): Installation of Eonnex cover on aircraft surfaces. · Ceconite, Inc - [STC SA1206CE](https://openairdocs.org/stc/SA1206CE.md): Outer wing panel reinforcement. · Jourdan Ray M - [STC SA4-383](https://openairdocs.org/stc/SA4-383.md): Metalized control surfaces replacing fabric covered surfaces. · Courtesy Air Service, Inc - [STC SA4-1341](https://openairdocs.org/stc/SA4-1341.md): Installation of two-piece windshield. · Aerospace Products, Inc - [STC SA962EA](https://openairdocs.org/stc/SA962EA.md): Installation of Canadian Aerocon Limited fail-safe spar modification. · Canadian Aerocon Limited - [STC SA643CE](https://openairdocs.org/stc/SA643CE.md): Install center section spar reinforcement kit. (H18 BA680, -618 THRU -710 AND -712 THRU -722) · Jourdan Ray M - [STC SA4-1030](https://openairdocs.org/stc/SA4-1030.md): Eonite covering on all control surfaces including flaps. · Lott William C - [STC SA1-236](https://openairdocs.org/stc/SA1-236.md): Air stair door. · Aerospace Products, Inc - [STC SA1-61](https://openairdocs.org/stc/SA1-61.md): Auxiliary outboard wing tanks. · Aerospace Products, Inc - [STC SA18WE](https://openairdocs.org/stc/SA18WE.md): Redesign bulkhead 5 to accommodate an accordion door. · Aerospace Products, Inc - [STC SA4-1047](https://openairdocs.org/stc/SA4-1047.md): Fiberglas nose cone. · Aerospace Products, Inc Next page: https://openairdocs.org/tcds/A-2-582/stcs.md?page=2 ## The whole list in SQL Runs in DuckDB 1.2 or later on the release's Parquet files over HTTPS: ```sql SELECT s.stc_number, s.description, s.holder, s.status, s.status_date FROM 'https://openairdocs.org/data/latest/faa_stc.parquet' s WHERE s.stc_number IN (SELECT stc_number FROM 'https://openairdocs.org/data/latest/faa_stc_model.parquet' WHERE tcds_number = 'A-2-582') ORDER BY s.status = 'Current' DESC, s.status_date DESC, s.stc_number ``` This list as a web page: https://openairdocs.org/tcds/A-2-582/stcs --- OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain.