# TCDS A-802: AeroSedan LLC - Type: Type certificate data sheet - Status: Current - Holder: AeroSedan LLC - Revision: 26 - Revised: September 15, 2015 - Product: Aircraft, Small Airplane - Certification basis: CAR 3 - Registered aircraft: 175, by the registry models matched to it (OpenAirDocs) - Data sheet PDF: https://openairdocs.org/files/sha256/88/51/885197b90d03ffd632885747c9b23d79399ede470b274cb7931b2c1cb1548a65 - FAA DRS: https://drs.faa.gov/browse/excelExternalWindow/6459CB1BCC4F559986257EE3006812AE.0001 - Page: https://openairdocs.org/tcds/A-802 ## Models (2) As the data sheet lists them. - S15AC - 15AC ## What the data sheet says From the PDF's text layer, line by line; tables lose their columns. The PDF is the record. ```text Page No. 1 2 3 4 5 6 7 Rev. No. 26 26 26 26 26 26 26 DEPARTMENT OF TRANSPORTATION FEDERAL AVIATION ADMINISTRATION A-802 │ Revision 26 │ AeroSedan, LLC │ (ROGERS) (MITCHELL) (AERONCA) 15AC S15AC │ September 15, 2015 AIRCRAFT SPECIFICATION NO. A-802 Type Certificate Holder AeroSedan, LLC P. O. Box 671487 Chugiak, Alaska 99567-1487 Type Certificate Ownership Record Aeronca Aircraft Corporation transferred ownership of Aircraft Type Certificate No. A-802 to Aeronca Manufacturing Corporation on August 18, 1950. Aeronca Manufacturing Corporation transferred ownership of Aircraft Type Certificate No. A-802 to Aeronca, Inc., on May 13, 1966. Aeronca, Inc., transferred ownership of Aircraft Type Certificate No. A-802 to William Brad Mitchell or Sandra Mitchell on April 11, 1991. William Brad Mitchell transferred ownership of Aircraft Type Certificate No. A-802 to Burl A. Rogers on July 10, 2000. Burl A. Rogers transferred ownership of Aircraft Type Certificate No. A-802 to AeroSedan, LLC on September 15, 2015. I - Model 15AC - 4 PCLM (Normal Category) Approved September 23, 1948 Engine Continental C-145-2 or O-300-A (See also Item 109 for optional engines) Fuel 80 minimum Octane aviation gasoline Engine limits For all operations, 2700 r.p.m. (145 h.p.) Airspeed limits Maneuvering 91 m.p.h. ( 79 knot) (True Indicated) Maximum structural cruising 110 m.p.h. ( 96 knot) Never exceed 139 m.p.h. (121 knot) All Model 15AC airplanes are eligible for these revised airspeed limits without any structural modification other than the remarking of the airspeed instrument. Propeller limits Static r.p.m. at max. permissible throttle setting: (with Item 1(a)) not over 2490, not under 2290. No additional tolerance permitted. Diameter: not over 76 in., not under 71 in. C.G. range (+14.5) to (+24.3) at 2050 lb. (+12.1) to (+24.3) at 1606 lb. or less. Straight line variation between points given. A-802, Rev. 26 Page 2 1 5 0 0 1 7 0 0 1 9 0 0 2 1 0 0 LB. 1 2 1 6 0 0 1 8 0 0 2 0 0 0 1 4 1 6 1 8 2 0 2 2 2 4 FRONT LIM IT A FT LIM IT INCHES Empty weight C.G. range None Maximum weight 2050 lb. No. seats 4 (1 adjustable from +19 to +22, one at +21, 2 at +52). Maximum baggage 120 lb. (+77) Fuel capacity 36 gal (+10) Oil capacity 8 qts. (-45) Control surface movements Elevator Up 15° Down 20° Elevator trim tab Up 23.5° Down 49.5° Aileron Up 30° Down 11° Rudder Right 25° Left 25° Serial Nos. eligible 15AC-1 and up Required equipment (Landplane) Item 1(a), 101, 102, 103, 104, 106, 201, 202, 204, 301, 302 and 401(a). (Skiplane) Item 1(a), 101, 102, 103, 104, 106, 208, 210, 301, 302, and 401(a) with 401(c). II - Model S15AC - 4 PCSM (Normal Category) Approved September 23, 1948 (Same as 15AC except for float installation, larger elevator trim tab, and fuselage reinforcement) Engine Continental C-145-2 or O-300-A (See also Item 109 for optional engines) Fuel 80 minimum octane aviation gasoline Engine limits For all operations, 2700 r.p.m. (145 hp.) Airspeed limits Never exceed 126 m.p.h. (110 knot) (True Indicated) Maximum Structural Cruising 100 m.p.h. (87 knot) Maneuvering Speed 88 m.p.h. (77 knot) Propeller limits See Item 2(b) C.G. range (+20.4) to (+24.3) at 2100 lb. (+14.5) to (+24.3) at 2050 lb. (+12.6) to (+24.3) at 1800 lb. or less Straight line variation between points given 1 5 0 0 1 7 0 0 1 9 0 0 2 1 0 0 LB. 1 2 1 6 0 0 1 8 0 0 2 0 0 0 1 4 1 6 1 8 2 0 2 2 2 4 FRONT LIM IT A FT LIM IT INCHES Empty weight C.G. range None Maximum weight 2100 lb. No. seats 4 (one adjustable from +19 to +22, one at +21, two at +52). Maximum baggage 120 lb. (+77) Fuel capacity 36 gal. (+10) Oil capacity 8 qts. (-45) Control surface movements Elevator 15 ° Up 20° Down Elevator trim tab 20.5° Up 51° Down A-802, Rev. 26 Page 3 Aileron 30° Up 11° Down Rudder 25° Right 25° Left Serial Nos. eligible 15AC-1 and up, Serial Nos. 15AC-1 through 15AC-176, 15AC-178 through 15AC-196 and 15AC-198 eligible as seaplane, when fuselage rear float carry through member is reinforced by clamp-on fitting as per Aeronca Dwg. No. S-23. Serial Nos. 15AC-177, 15AC-197, 15AC-199 and up require no reinforcement. Required equipment Items 2(b), 101, 102, 103, 104, 106, 108, 209, 301, 302, 401(b). Specifications Pertinent to All Models Datum Leading edge of wing Leveling means Lower door sill Certification basis Aircraft Type Certificate No. A-802 Part 03 of the Civil Air Regulations effective December 15, 1946 (Normal Category). Date of Application for Type Certificate July 23, 1947. Production basis None. Prior to original certification of each aircraft manufactured subsequent to February 27, 1952, a CAA or FAA representative must perform a detailed inspection for workmanship, materials, and conformity with the approved technical data, and a check of the flight characteristics. Equipment: A plus (+) or minus (-) sign preceding the weight of an optional item indicates the net weight change when that item is installed in place of the equivalent required item. Propellers and Propeller Accessories (See Note 3) 1. Propeller: (a) (Model 15AC with Continental C-145-2 engine) Sensenich 73BR45, 14 lb. (-65) 73BR44, Lewis L6FK39, or any other fixed pitch wood propeller eligible for the engine power and speed. All propellers must meet the diameter and r.p.m. limits given under "Propeller limits" NOTE: INSTALLATIONS ACCOMPLISHED AFTER MARCH 30, 1951 ELIGIBLE ONLY ON C-145 DAMPERED ENGINES DENOTED BY SUFFIX LETTER "D" ON ENGINE SERIAL NUMBER. 2. Propeller: (a) (Model 15AC with Continental C-145-2 engine) McCauley 1A170-DM7653- 34 lb. (-65) DM7643 or any other McCauley 1A170 propeller which meets the following limits: Static r.p.m. at max. permissible throttle setting: not over 2490, not under 2240. No additional tolerance permitted. Diameter: not over 76 in., not under 74 in. (b) (Model S15AC with Continental C-145-2 engine) McCauley 1A170-DM7645, 34 lb. (-65) -DM7643, or any other McCauley 1A170 propeller which meets the following limits: Static r.p.m. at max. permissible throttle setting: not over 2540, not under 2380. No additional tolerance permitted. Diameter: not over 76 in., not under 74 in. (c) (Model 15AC and S15AC with Item 109(a) engine) McCauley 1A170-DM7647 34 lb. (-65) or any other McCauley 1A170 propeller which meets the following limits: Static r.p.m. at max. permissible throttle setting: not over 2600, not under 2400. No additional tolerance permitted. Diameter: not over 76 in., not under 74 in. Placard required: "Avoid continuous engine operation between 2150 and 2250 r.p.m." (d) (Model 15AC and S15AC with Item 109(b) engine) McCauley 1A170 34 lb. (-65) propeller which meets the following limits: Static r.p.m. at max. permissible throttle setting: not over 2450, not under 2250. No additional tolerance permitted. Diameter: not over 76 in., not under 74 in. Placard required: "Avoid continuous engine operation between 2100 and 2300 r.p.m." 3. Propeller Spinner (Aeronca Dwg. No. 3-988) 1 lb. (-69) A-802, Rev. 26 Page 4 4. Propeller: (a) (Model 15AC with Continental C-145-2 engine) Koppers' Aeromatic 31 lb. (-65) F200/00-73E (eligible only on C-145 dampered engines denoted by suffix letter "D" on engine serial number). Parts List Assembly No. 4336. Low Pitch Setting 14° measured at 24 inch station. Static r.p.m. at max. permissible throttle setting: not over 2700, not under 2600. No additional tolerance permitted. Diameter: not over 73 in., not under 71.5 in. When this propeller is installed, installation and operation must be accomplished in accordance with Koppers' "Installation and Operating Limitations No. 27" and Item 401(d) must be appended to the Airplane Flight Manual, Item 401(a). (b) (Model 15AC with Continental C-145-2 engine) Koppers' Aeromatic 31 lb. (-65) F200/00-74E (eligible only on C-145 dampered engines denoted by suffix letter "D" on engine serial number). Parts list assembly No. 4389, -1 (rev. 2-3-50). Low pitch setting 14° at 24 inch sta. Static r.p.m. at max. permissible throttle setting: not over 2700, not under 2600. No additional tolerance permitted. Diameter: not over 74 in., not under 72.5 in. When this propeller is installed, installation and operation must be accomplished in accordance with Koppers' "Installation and Operating Limitations No. 55", and Item 401 (f) must be appended to the Airplane Flight Manual, Item 401(a). 5. Propeller: (a) (Model 15AC with Continental C-145-2 engine) Hartzell adjustable, model HA-12UF-3 hub, 8032-6 to -8 blades 21 lb. (-65) Note: INSTALLATIONS ACCOMPLISHED AFTER MARCH 30, 1951, ELIGIBLE ONLY ON C-145 DAMPERED ENGINES DENOTED BY SUFFIX LETTER "D" ON ENGINE SERIAL NUMBER." Static r.p.m. at max. permissible throttle setting: Not over 2490, not under 2240. No additional tolerance permitted. Diameter: Not over 74 in., not under 72 in. 6. Propeller: (a) (Model S15AC with Continental C-145-2H engine) McCauley - 2 position controllable, hub 2B36C7 blades 78K-2 60 lb. (-65) Pitch settings at 30 inch sta.: Low 11° high 16° Diameter: Not over 76 in., not under 74.5 in. Reinforcement of forward fuselage required in accordance with Ellis Air Lines, Ketchikan, Alaska, Dwg. No. AER A-1-1 and CAA Airplane Flight Manual Supplement dated November 15, 1955, required (Item 401(i)) 7. Propeller: (a) (Model 15AC only) Sensenich M74DM fixed pitch metal (eligible 29 lb. (-65) only on C-145 dampered engines denoted by suffix letter "D" on engine serial number). Static r.p.m. at max. permissible throttle setting: Not over 2490, not under 2240. No additional tolerance permitted. Diameter: Not over 74 in., not under 72 in. (b) (Model S15AC only) Sensenich M74DM fixed pitch metal (eligible 29 lb. (-65) only on C-145 dampered engines denoted by suffix letter "D" on engine serial number). Static r.p.m. at max. permissible throttle setting: Not over 2540, not under 2380. No additional tolerance permitted. Diameter: Not over 74 in., not under 72 in (c) (Model 15AC and S15AC with item 109 (a) installed) Sensenich M74DM 29 lb. (-65) fixed pitch metal. Static r.p.m. at maximum permissible throttle setting: Not over 2600, not under 2400. No additional tolerance permitted. Diameter: Not over 74 in., not under 72 in. Applicable Airplane Flight Manual shall be revised by the Modifier and approved by the FAA Engineering and Manufacturing Division to reflect this installation change A-802, Rev. 26 Page 5 Engine and Engine Accessories - Fuel and Oil System 101. Carburetor air heater (Aeronca Dwg. No. 7-866) 1 lb. (-46) 102. Carburetor air scoop (Aeronca Dwg. No. 3-978 on Serial Nos. 15AC-1 through 4 lb. (-48) 15AC-483; Aeronca Dwg. No. 4-1002 on Serial Nos. 15AC-484 and up) 103. Starter - Delco-Remy (Cont. No. 50309) 16 lb. (-46) 104. Exhaust system - Kay Industries (Aeronca Dwg. No. 7-819) 16 lb. (-45) 105. Deleted. 106. Pressure type oil cooler installation (Aeronca Dwg. No. 7-832E) 10 lb. (-41) 107. Oil filter, Fram PB-5, Kit No. K-510 [Fram Installation Dwgs. No. 5 lb. (-24) 62395 and No. 62395A (detail pertinent to installation with suction type oil cooler installation not applicable) or Installation Dwg. No. 62893 and Instruction Sheet No. 62892] (weight includes one quart of oil). 108. Oil capacity plate for Model S15AC (Aeronca Dwg. No. 2-1440) No weight change 109. Engine (a) Franklin 6A4-165-B3 eligible only when installed in accordance Use actual weight with Maine Air Service Inc., 133 Massachusetts Avenue, South Portland, Maine 04106, Franklin Aeronca Conversion Kit No. 1-8-50 Installation Instructions. Fuel: 80 Minimum octane aviation gasoline Engine limits: For all operations, 2800 r.p.m. (165 hp.) Oil capacity: 9 quarts (-40) Requires installation of Items 2(c) and 401(g). (b) Franklin 6A4-150-B3. Same as 109(a) except for limitations Use actual weight as follows: Engine limits: For all operations, 2600 r.p.m. (150 hp.) Oil capacity: 2 gal. (-40) Requires installation of items 2(d) and 401(h) Landing Gear and Floats 201. Two main wheel-brake assemblies, 6.00-6, Type III (a) Goodyear Model No. LF6HBD 13 lb. (0) Wheel Assembly No. 511960M Brake Assembly No. 9521239 (b) Goodyear Model CL6HBM (cross-wind wheel) 32 lb. (0) Wheel and Brake Assembly No. 266AX36 (Installed in accordance with Aeronca Dwg. No. 7-890) (c) Cleveland Model DHB-3 13 lb. (0) Wheel Assembly No. C-38500H Brake Assembly No. C-2000H (d) Burl’s Aircraft LLC 15AC-WBKIT Wheel Assembly No. R-60-5A Brake Assembly No. R-35-4A 24 lb. (0) 202. Two main wheel 4-ply rating tires, 7.00, Type III (with regular tubes) 20 lb. (0) 204. Tail wheel assembly (a) Maule, SFS-1-2, swivel type (Aeronca Dwg. No. 7-842) 6 lb. (+211) (b) Scott Model 3200 steerable, swiveling (Installed in accordance with Scott Bulletin No. I-170) 8 lb. (+211) 208. Skis (Serial Nos. 15AC-1 through 15AC-32 must have landing gear modified in accordance with Aeronca Dwg. No. 7-818 to be eligible as skiplanes) (a) Federal A2500A (Federal Installation Dwg. No. 11G174) 74 lb. (0) (b) Federal A2500 (Federal Installation Dwg. No. 11G174) 65 lb. (0) (c) Federal A3500 (Federal Installation Dwg. No. 11G174) 68 lb. (0) (d) Federal A3500A (Federal Installation Dwg. No. 11G174) 82 lb. (0) 209. Edo Model 89-2000 float installation 245 lb. (+19) Elevator tab assembly per Aeronca Dwg. No. 5-504 required with this installation. 210. Cuff assembly ski gear fairing (Aeronca Dwg. No. 4-984) No weight change 211. Consolidair Model 17 wheel fender (Consolidair Dwg. No. 0046) 9 lb. (0) A-802, Rev. 26 Page 6 Electrical Equipment 301. Battery - Willard AW-12-25 safety fill 24 lb. (-27) 302. Engine-driven generator (Continental Dwg. No. 40435) 10 lb. (-46) 303. Landing light - GE 4357 3 lb. (+11) 304. Position lights (Aeronca Dwg. No. 7-843) 2 lb. (+122) Interior Equipment 401. (a) (Model 15AC) CAA Approved Airplane Flight Manual dated August 9, 1949, or dated September 23, 1948, or CAA tentatively approved Flight Manual dated March 31, 1948. (b) (Model S15AC) CAA tentatively approved Airplane Flight Manual dated July 16, 1948 or approved Airplane Flight Manual dated September 23, 1948. (c) CAA approved Skiplane Supplement to Airplane Flight Manual, dated January 25, 1949. In lieu of this item the following Skiplane Performance information may be appended to the performance Section of Item 401(a): "TAKE-OFF AND LANDING DISTANCE - Under the most favorable conditions of smooth packed snow at temperatures approximating 32 degrees F the skiplane take-off distance is approximately 10% greater than that shown for the landplane and the skiplane landing distance is approximately 20% greater than that shown for the landplane. In estimating take-off and landing distance for other conditions caution should be exercised in that lower temperatures or other snow conditions will usually increase the take-off distances and either decrease or increase the landing distances. NORMAL RATE OF CLIMB - Reduce rate of climb values of landplane by approximately 10%. STALLING SPEEDS (POWER OFF) - Stalling speeds for skiplane are same as shown for landplane." (d) CAA approved Supplement to Airplane Flight Manual, dated June 28, 1949. Required with Item 4(a). (e) CAA approved Supplement on Sevdy-Sorenson Corporation Sprayer Installation dated May 3, 1949, to Airplane Flight Manual. (f) CAA approved Supplement to Airplane Flight Manual, dated March 15, 1950. Required with Item 4(b). (g) CAA approved Supplement to Airplane Flight Manual, dated August 11, 1950. Required with Item 109(a). (h) CAA approved Supplement to Airplane Flight Manual, dated October 5, 1950. Required with Item 109(b). (i) CAA approved Supplement to Airplane Flight Manual, dated November 15, 1955. Required with Item 6(a). 402. Cabin heater (Aeronca Dwg. No. 7-866) 2 lb. (-46) 403. Rear seat cabin heater (Aeronca Dwg. No. 7-891) 3 lb. (+10) Miscellaneous (Not listed above) 601. Auxiliary door for left side, installed in accordance with Levens Bros. +11 lb. (+24) Air Service Ltd., Toronto, Canada, Dwg. No. 11A and installation instructions 602. Crop sprayer installation (Sevdy-Sorenson) installed in accordance with +32 lb. (+37) Sevdy-Sorenson, Worthington, Minn., drawing and installation instructions dated May 3, 1949 Placard required on Tank: "Maximum allowable tank load * lb." *Determine the lb. of load by weight and balance computation When this sprayer is installed, aircraft must be certificated and operated in accordance with Item 401(e), "CAA approved Supplement dated May 3, 1949, to Airplane Flight Manual." This supplement must appended to the Airplane Flight Manual, Item 401(a). NOTE 1. Current weight and balance report including list of equipment included in certificated weight empty, and loading instructions when necessary, must be in each aircraft at the time of original certification and at all time thereafter (except in the case of air carrier operators having an approved weight control system). NOTE 2. The following placard must be displayed in front of and in clear view of the pilot: "This airplane must be operated as a normal category airplane in compliance with the limitations of the CAA approved Airplane Flight Manual. No acrobatic maneuver (including spins) are approved." A-802, Rev. 26 Page 7 NOTE 3. All propellers and propeller accessories eligible on the Continental C-145-A engine are also eligible on the Continental O-300-A engine. NOTE 4. Revision 20 of this Aircraft Specification dated April 1, 1971, is incorrectly numbered Revision 16. Revision 21 of this Aircraft Specification dated September 4, 1973, is incorrectly numbered Revision 17. Revision 22 of this Aircraft Specification dated April 26, 1991, is incorrectly numbered Revision 18. Revision 23 of this Aircraft Specification dated April 28, 2000, is incorrectly numbered Revision 19. -END- ``` ## ADs (3, in force first) - [AD 2012-04-10](https://openairdocs.org/ad/2012-04-10): Wings · Rogers, Burl A. 15AC and S15AC. Effective Apr 17, 2012 - [AD 2006-03-08](https://openairdocs.org/ad/2006-03-08): Vacuum pumps · Aero Advantage 14-19, 14-19-2, 14-19-3 and 299 more. Effective Mar 10, 2006 - [AD 48-43-02](https://openairdocs.org/ad/48-43-02): Continental C-145-2 Engines · Cessna 170, 170A, 15AC and 1 more ## Registered aircraft by registry model (OpenAirDocs) - [Aeronca 15AC](https://openairdocs.org/model/aeronca-15ac): 162 aircraft (registry code 0191202) - [Aeronca S15AC](https://openairdocs.org/model/aeronca-s15ac): 13 aircraft (registry code 0191204) ## STCs approved under this data sheet (105, first 50) - [STC SA02253AK](https://openairdocs.org/stc/SA02253AK): Installation of a McCauley 1A170/SFC or 1A175/DM 80-inch diameter fixed-pitch propeller.. Burl's Aircraft LLC - [STC SA01233SE](https://openairdocs.org/stc/SA01233SE): Fabrication and installation of Alaskan Bushwheel LLC tail wheel and fork assembly. ABI, LLC - [STC SA04837NY](https://openairdocs.org/stc/SA04837NY): Installation of AeroLED's Holdings, LLC., position lights, navigation lights, strobe lights and beacon lights. AeroLED's Holdings, LLC - [STC SA12406WI](https://openairdocs.org/stc/SA12406WI): Installation of a Garmin AXIS Flight Display System. Garmin International Inc. - [STC SA04652CH](https://openairdocs.org/stc/SA04652CH): To allow use of 100R grade aviation fuel meeting Swift Fuel, LLC specification. Swift Fuels LLC - [STC SA02636SE](https://openairdocs.org/stc/SA02636SE): Installation of Garmin GPS 175 Navigation System and GNX 375 Navigation System with ADS-B In/Out Transponder.. Garmin International Inc. - [STC SA02019SE-D](https://openairdocs.org/stc/SA02019SE-D): Installation of Garmin Model GTN 625/635/650; 725/750 Navigation System. Garmin International Inc. - [STC SA00079NY](https://openairdocs.org/stc/SA00079NY): Installation of Airwolf remote mounted engine oil filter kit AFC-K008 on single and multi engine fixed wing light aircraft incorporating Teledyne Continental reciprocating engines of 450 horsepower or less.. Airwolf Filter Corporation - [STC SA7965SW](https://openairdocs.org/stc/SA7965SW): Application of fabric and polyurethane finishing system.. Shady Aviation LLC - [STC SA04378CH](https://openairdocs.org/stc/SA04378CH): Installation of an engine modified per STC SE04349CH. SureFly Partners Ltd. - [STC SA4503NM](https://openairdocs.org/stc/SA4503NM): Remove original cloth covering and install Ceconite covering. Ceconite Division of Poly-Fiber Inc. - [STC SA3-423](https://openairdocs.org/stc/SA3-423): Installation of CT-3000 tail ski on airplanes equipped with Scott 3200 or 3400 tail wheels.. F.Atlee Dodge Aircraft Services - [STC SA04776NY](https://openairdocs.org/stc/SA04776NY): The HIPEC Covering and Finishing System must be performed and maintained. HIPEC Aircraft Coatings Inc. - [STC SA02101AK](https://openairdocs.org/stc/SA02101AK): Installation and fabrication of steel wing lift strut attachment fittings.. Burl's Aircraft LLC - [STC SA02121AK](https://openairdocs.org/stc/SA02121AK): Modification of Tube No. 90 and installation of 'Dogleg' diagonal brace tubes.. Burl's Aircraft LLC - [STC SA02151AK](https://openairdocs.org/stc/SA02151AK): Fabrication and installation of seaplane refueling steps on left and right sides of boot cowl. Burl's Aircraft LLC - [STC SA02197AK](https://openairdocs.org/stc/SA02197AK): Installation of Hartzell HC-C2YR-1BF/F8477-4 Propeller, Hartzell C-3568-P Polished Spinner Assembly with A-2476-16 Spinner Mounting Kit, and if required, Hartzell Model C-1576 Damper Assembly. Burl's Aircraft LLC - [STC SA02229AK](https://openairdocs.org/stc/SA02229AK): Installation of a vertical instrument panel.. Burl's Aircraft LLC - [STC SA1114NW](https://openairdocs.org/stc/SA1114NW): Installation of Cleveland wheels, tires (8.00 X 6 or 8.50 X 6), and brake assembly (double puck) (Kit 199-06200). Burl's Aircraft Rebuild - [STC SA1193NW](https://openairdocs.org/stc/SA1193NW): Installation of left hand pilot door. Burl's Aircraft Rebuild LLC - [STC SA1194NW](https://openairdocs.org/stc/SA1194NW): Installation of an aluminum baggage door.. Burl's Aircraft LLC - [STC SA893NW](https://openairdocs.org/stc/SA893NW): Removal of left, right, or both existing bladder fuel cell(s); and fabrication and installation. Burl's Aircraft Rebuild - [STC SA02153AK](https://openairdocs.org/stc/SA02153AK): Installation of Burl's Aircraft Rebuild Magnum I tail wheel Penetration ski. Burl's Aircraft Rebuild LLC - [STC SA01015SE](https://openairdocs.org/stc/SA01015SE): Installation of eligible Alaska Bushwheel, Inc. wheels and TSO-C62d tires. ABI LLC - [STC SA02553AK](https://openairdocs.org/stc/SA02553AK): Fabrication and installation of a Tail Wheel Anti-Shimmy Dampener. Keller Engineering Group LLC - [STC ST02291AK-A](https://openairdocs.org/stc/ST02291AK-A): Fabrication and installation of a Tail Wheel Anti-Shimmy Dampener. Keller Engineering Group LLC - [STC SA02552AK](https://openairdocs.org/stc/SA02552AK): Installation of Hartzell Model HC-C2YR-1N/NG8301-3 Trailblazer propeller. Burl's Aircraft LLC - [STC SA02268CH](https://openairdocs.org/stc/SA02268CH): Installation of Airwolf Filter Corp. Air Oil Separator. Airwolf Filter Corporation - [STC SA00344BO PAGE 1](https://openairdocs.org/stc/SA00344BO%20PAGE%201): Installation of Parmetheus Plus LED PAR36 and PAR46 taxi and landing lights.. Whelen Aerospace Technologies - [STC SA21NW](https://openairdocs.org/stc/SA21NW): Installation of a 70 pound baggage compartment in either or both EDO 89-2000, 89A-2000 or 689-2130 floats. Kenmore Air Harbor Inc - [STC SA04112CH](https://openairdocs.org/stc/SA04112CH): Installation of Appareo Systems, LLC Stratus ESG ADS-B transponder. Appareo Systems LLC. - [STC SA01435SE](https://openairdocs.org/stc/SA01435SE): Installation of J.P. Instruments (JPI) Primary Engine Data Management System. J. P. Instruments - [STC SA02503AK](https://openairdocs.org/stc/SA02503AK): Installation of AMSAFE State of the Art Restraint System (SOARS) inflatable restraints. AMSAFE Inc. - [STC SA00433NY](https://openairdocs.org/stc/SA00433NY): Installation of Airwolf remote mounted engine oil filter model AFC-500 or AFC-600 on multi engine fixed wing light aircraft incorporating Franklin reciprocating engines of 450 horsepower or less.. Airwolf Filter Corporation - [STC SA02212AK](https://openairdocs.org/stc/SA02212AK): Replacement of existing landing and/or taxi light reflector and bulbs with high intensity discharge (HID) lighting systems. Seaplanes North LLC - [STC SA02428SE](https://openairdocs.org/stc/SA02428SE): Installation of an Air Stream Switch for an electric time recording device on non-pressurized aircraft. Henry F Rogers/David E Polley - [STC SA10077SC](https://openairdocs.org/stc/SA10077SC): Installation of push-button starter system.. Hartzell Engine Technologies, LLC - [STC SA00478CH](https://openairdocs.org/stc/SA00478CH): Installation of Cooper Superflite 102 Fabric.. Aviation Products Systems Inc. - [STC SA01768SE](https://openairdocs.org/stc/SA01768SE): Installation of an oil cooler system.. Steve's Aircraft - [STC SA4305WE](https://openairdocs.org/stc/SA4305WE): Installation of GAR-AERO wheel adapters and tundra type tires on the main landing gear. Seaplanes North LLC - [STC SA10921SC](https://openairdocs.org/stc/SA10921SC): Installation of an alternator and regulator as a replacement to existing OEM generators and mechanical voltage regulators. Hartzell Engine Technologies, LLC - [STC SA02283SE PAGE 2](https://openairdocs.org/stc/SA02283SE%20PAGE%202): Installation of Electronics International Inc. Glass Panel Engine Monitor (with In Flight Data) CGR-30P. Electronics International Inc. - [STC SA02402SE PAGE 2](https://openairdocs.org/stc/SA02402SE%20PAGE%202): Installation of Electronics International Inc. Glass Panel Engine Monitor (with In-Flight Data) CGR-30C. Electronics International Inc. - [STC SA02428AK](https://openairdocs.org/stc/SA02428AK): Installation of a hydraulically actuated ski drag assembly. Northern Airframes LLC - [STC SA01765SE](https://openairdocs.org/stc/SA01765SE): Installation of Alaskan Bushwheel TSO-C26d wheels, Part Number (P/N) ABI-1010. ABI, LLC - [STC SA00432SE](https://openairdocs.org/stc/SA00432SE): Installation of EGT 701 series fuel flow instrument.. J P Instruments - [STC SA00861SE](https://openairdocs.org/stc/SA00861SE): Installation of J.P. Instruments (JPI) fuel flow indicating system. J P Instruments - [STC SA01026SE](https://openairdocs.org/stc/SA01026SE): Improved fuel gascolator assembly.. Steve's Aircraft - [STC SA02141AK](https://openairdocs.org/stc/SA02141AK): Installation of an O-360-F1A6 Lycoming engine. Tarik William Spear - [STC SA02937CH](https://openairdocs.org/stc/SA02937CH): One Time Supplemental Type Certificate approval for the Installation of a Franklin 6A335B engine and McCauley 2A31C21 propeller.. Hanifan William P All 105: https://openairdocs.org/tcds/A-802/stcs.md --- OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain.