# TCDS A6EU: Aerospatiale (Societe Nationale Industrielle Aerospatiale)

- Type: Type certificate data sheet
- Status: Historical
- Holder: Aerospatiale (Societe Nationale Industrielle Aerospatiale)
- Revision: 9
- Revised: March 2, 2010
- Product: Aircraft, Large Airplane
- Certification basis: Part 21, CAR 10
- Data sheet PDF: https://openairdocs.org/files/sha256/51/32/5132a7f2ded948f8f512fb5f8bb0227d5791af108b4f370d1fd5f147ec6c23b9
- FAA DRS: https://drs.faa.gov/browse/excelExternalWindow/BF4109934D146CB5862576E90043BCE7.0001
- Page: https://openairdocs.org/tcds/A6EU

## Models (1)

As the data sheet lists them.

- Nord 262A Series

## What the data sheet says

From the PDF's text layer, line by line; tables lose their columns. The PDF is the record.

```text
Page 
No. 
1 2 3 4 5 
Rev. 
No. 
9 6 6 6 7 
 
Surrendered October 27, 2009 
 
DEPARTMENT OF TRANSPORTATION 
FEDERAL AVIATION ADMINISTRATION 
A6EU 
Revision 9 
AEROSPATIALE Nord 
262A Series 
 
March  2, 2010 
 TYPE CERTIFICATE DATA SHEET A6EU  
 
This data sheet, which is a part of type certificate No. A6EU, prescribes conditions and limitations under which the product for 
which the type certificate was issued meets the airworthiness requirements of the Civil Air Regulations. 
 
Type Certificate Holder: AEROSPATIALE (Soc iete Nationale Industrielle Aerospatiale) 
 
 
  (1)  This TC was surrendered for cancellation on October 27, 2009.  Only standard airworthiness 
certificates issued prior to October 27, 2009 are valid. 
(2)  Future unsafe conditions existing in the aircraft may result in the revocation of the 
airworthiness certificates of the aircraft if there is no entity to comply with 14 CFR 
§ 21.99(a), “Required design changes.” 
(3)  Replacement parts may not be available in the future. 
 
 
I  - Nord262A Series (Transport Category), approved March 15, 1965, for Model 262A-12. 
 Amended January 10, 1974, to in clude entire Nord 262A Series. 
 
 Engines 2 Turbomeca Bastan VI Model C-1 (Turboprop) 
  Reduction gearing, Engine:  Propeller, 21.0909:  1 
 
 Fuel (Fuels shall conform JP-1  
  to the specifications as  American JP-1 ASTM Jet A and Jet A1 
  listed or to subsequent  French TRO Norme AIR 3405 
  revisions thereof)  British D. Eng.R.D.  2453 - D.Eng.R.D.  2494 
 
  JP-4   (See NOTE 3) 
   American JP-4 MIL-T-5624 and ASTM Jet B 
   French TR4 Norme AIR 3407 
   British D.Eng.R.D.   2486 - D.Eng.R.D. 2454 
 
  Water/Methanol  
   Water/Methanol Mixture - 56%  water/ 44% methanol by volume 
   Methanol Specification - American OM 232 Grade A 
    French AIR 3651 
    British D.Eng.R.D.  2491 
    NATO S747 
 
  Approved Fuel Additives  
   Phillips PFA/55 MB anti-icing additive in quantity up to 0.15% by volume. 
   Shell ASA-3 antistatic additive in quantity up to 0.0001% by volume. 
 
 Oil  (Engine and Gearbox) American MIL-L-00.7808 and MIL-L-23699* 
  French AIR 3513, AIR 3514, AIR 3517* and AIR 3515* 
  British D.Eng.R.D.  2490 and D.Eng.R.D.  2487* 
  * The oil specifications marked w ith * should not be used below -30°C

Engine Limits Rating  (static sea level, ISA) 
 Shaft Horsepower 
(shp) 
Jet Thrust 
(lb.) 
Engine Speed 
(r.p.m.) 
WET Takeoff (5 min.) 987 180 33, 500 
DRY Takeoff and Maximum 
 Continuous (unrestricted) 
987 180 33, 500 
 Engine Limits (cont’d) Engine Temperature Limits  
  Turbine Gas Temperature, T 4 (Jet Pipe) 
WET Takeoff (5 min.) 550°C (1022 °F) 
DRY Takeoff and Maximum Continuous 530°C (985 °F) 
Starting (Momentary) 650°C (1202 °F) 
  Oil Inlet Temperature (measured in tank) 
Minimum for applying power 15°C( 5 9 °F) 
Minimum in flight (steady conditions) 25°C( 7 7 °F) 
Maximum 85°C (185 °F) 
 
  Vibration Maximum Amplitude  
   30 microns (i.e. vibration indicator read ing of 1.96 or of 50 percent.)  (See NOTE 6) 
 
  Engine Speed Limitations  
Nominal engine r.p.m. 99.4% (33, 500)
Minimum Regulated r.p.m. 86   % (29, 000)
Maximum Permissible r.p.m. 102.6% (34, 600)
   +  1 percent margin is permissible to allow for tachometer instrument error. 
 
 Propeller and Propeller Limits 2 Ratier-Figeac Model FH-146, with 3 FH.106.200 blades each. 
  Diameter 10.49 ft. (nominal) 
    Minimum allowable for repairs 10, 392 ft.  No further reduction permitted. 
   Pitch settings at .7 radius. 
Ground fine -1° 48’
Flight fine 9° 54’
Feathered 81°
 
 Airspeed Limits  (IAS)  
VMO (Maximum Operating) 214 kts.
VFE (flaps down 35°) 127 kts.
VFE (flaps down 15°) 143 kts.
VLO (landing gear operation) 143 kts.
VLE (landing gear extended) 154 kts.
VMC Minimum control speed with the critical engine inoperative 
 (propeller windmilling or auto-feathering) 
86 kts.
(ISA S.L.)
VA (design maneuvering) 133 kts.
 
 C.G. Range  (Gear Extended) 
  Forward Limits Aft Limits 
 Weight 
(lb.) 
% Reference
Chord 
 
Sta. 
% Reference
Chord 
 
   Sta. 
Takeoff 23, 370 
22, 930
20.9 
20.3 
312.5
311.4
30.0 
30.0 
323.6 (See NOTE 4) 
323.6 
Landing 20, 280 
18, 080
16.0 
12.0 
306.5
301.9
30.0 
30.0 
323.6 
323.6 
 
 Reference Chord The reference chord is the wing root profile chord at the center section = 122 in. 
   Stations (sta.) are given in inches linear distance from datum. 
 
 Datum The datum, or origin of moments, is St ation 0 located 3 in. forward of the nose or 287 in. 
forward of the leading edge of the center section wing root. 
 
 Leveling Means Leveling is provided by a bubble level,  for both longitudinal and transverse directions, 
located at Fuselage Frame Sta. No. 11, approx. 4 in. below cabin floor.  Access is gained 
by removing a floor panel.

3 A6EU 
 Maximum Weights (l b.)  Model 262A-12 All Models Except 
     (See NOTE 4)    Model 262A-12  
   Ramp  23, 050  23, 490 
   Takeoff (brake release)  22, 930  23, 370 
   Landing  22, 710  22, 710 
   Zero Fuel  22, 710  22, 710 
 
 Minimum Crew 2 - Pilot and copilot. 
 
 Maximum Passengers 29 - As limited by approved seating arrangement. 
 
 Maximum Baggage 
 
Compartment 
Arm 
(in.) 
Capacity
(lb.) 
Max. Floor Loading
(lb./sq. ft) 
Model 262A-12 
A. (Fwd L.H.) 
B. (Fwd R.H.) 
C. (Fwd L.H.) (partial loading) 
D. (Rear R.H.) 
 (Upper Shelf) 
 (Middle Shelf) 
 (Lower Shelf) 
 
169.0 
169.0 
182.0 
 
530.0 
530.0 
530.0 
 
665 
720 
245 
 
162 
148 
206 
 
100 
100 
100 
 
15 
15 
30 
Model 262A 
A. (Fwd L.H.) 
B. (Fwd R.H.) 
C. (Rear R.H.) 
 (Upper Shelf) 
 (Middle Shelf) 
 (Lower Shelf) 
 
173.0 
169.0 
 
528.0 
528.0 
528.0 
 
660 
720 
 
132 
132 
165 
 
85 
85 
 
15 
15 
30 
 
 Standard Fuel Capacity Two wing tanks, Sta. 344.0, each of  264 U.S. Gal usable.  Airplane total usable fuel is 
528 U.S. Gal. 
 
 Optional Fuel Capacity Two auxiliary fuel tanks, Sta. 344.0, each of 75 U.S. Gal usable.  With the auxiliary 
tanks, airplane total fuel is 678 U.S. Gal. (See NOTE 2) 
   (See Note 1(c) for system and unusable fuel) 
 
 Water/Methanol Capacity One tank in R.H. landing fa iring, Sta. 307.0, 205 lb. capacity.  28.29 U.S. Gal. 
 
 Oil Capacity Total system 5.8 U.S. Gal. 
   Tank capacity 3.2 U.S. Gal. quantity usable, 8 lb., for each engine located in annular 
tanks mounted in engine nose cowls, Sta. 216.0. 
 
 Maximum Altitude 19, 200 ft. 
 
 Other Operating Limitations The aircraft must be ope rated in accordance with the limitations presented in the 
SGAC (Secretariat General a l’Aviation Civile)-Approved Airplane Flight Manual.

Control Surface Movements 
Elevator 
Elevator trim tab 
Elevator balance tab 
Up 
Up 
Up 
20° 
6° 
7° 
16’ + 30’ 
45’ + 1 ° 
17’ + 1 ° 
Down 
Down 
Down 
16° 
6° 
6° 
17’ +  30’ 
45’ +  1 ° 
30’ +  1 ° 
Aileron 
Aileron trim tab 
Aileron balance tab 
Up 
Up 
Up 
18° 
12° 
6° 
30’ + 30’ 
 +  1 ° 
10’ + 1 ° 
Down 
Down 
Down 
13° 
12° 
4° 
20’ +  30’ 
 +  1 ° 
27’ +  1 ° 
Rudder 
Rudder trim tab 
Rudder balance tab 
Right 
Right 
Right 
22° 
15° 
7° 
 +  30’ 
40’ + 1 ° 
20’ + 1 ° 
Left 
Left 
Left 
22° 
15° 
7° 
 +  30’ 
40’ +  1 ° 
20’ +  1 ° 
Wing flaps Outer 35°  Inner 25°  
 
 Serial Nos. Eligible The French Certificate of Airworthiness for Export endorsed as noted under “Import 
Requirements” must be submitted for each individual aircraft for which application for 
standard airworthiness certification is made.  (See NOTE 7). 
 
 Certification Basis CAR Part 10 dated March 1955 and French Specification AIR 2051 as revised to June 
15, 1963, certified by SGAC as equivalent to U.S. CAR Part 4b, effective December 31, 
1953 plus amendments 4b-1 through 4b-14, Special Conditions as stated in FAA letters 
dated November 15, 1963 and January 19, 1964, and Special Regulations SR-422B 
effective July 9, 1959.  Type Certificate No. A6EU issued March 15, 1965.  Date of 
Application for type certificate:  April 1, 1962. 
 
   Compliance with the following optiona l requirements has been established: 
   French Spec. AIR 2051 Sections equivalent to: 
    Ditching provisions CAR 4b.361 
    Ice protection provisions CAR 4b.640 
 
 Import Requirements A United States Certificate of Ai rworthiness may be issued on the basis of French 
Certificate of Airworthiness for Export signed by a representative of the Secretariat 
General a l’Aviation Civile (SGAC) containing the following statement, “The airplane 
covered by this certificate has been examined and found to comply with French AIR 
2051 Regulation effective June 15, 1963 and conforms to type certificate No. A6EU.” 
 
 Required Equipment The basic equipm ent as prescribed in the applicable airworthiness regulations (See 
Certification Basis) must be installed in the aircraft for certification. 
 
   Model numbers of Nord 262 airplanes of  the “A” series carry a dash number which 
identifies the particular customer configuration.  Such configurations differ from the 
basic 262A type design primarily with regard to optional cockpit equipment and interior 
arrangement. 
 
   NORD AVIATION Report 262 12 00 700 contai ns a list of required equipment for 
Model 262A-12.  Nord Aviation Report 262A 00 700 contains lists of required 
equipment and optional equipment for Model 262A. 
 
   In addition, the following items of equipment are required: 
 
    Battery Temperature Control Installa tion, except for Model 262A-12, in accordance 
with Nord Aviation Modification No. 789 (Service Bulletin No. 26-10). 
 
    For Model 262A-12, SGAC-approved Airp lane Flight Manual, approved March 15, 
1965, reissued May 31, 1965. 
 
    For all Models except Model 262A-12,  SGAC-approved Airplane Flight Manual for 
Nord 262A, approved June 10, 1966, reissued January 10, 1974.

5 A6EU 
 Service Information Information essential to the prope r maintenance of the aircraft, including retirement times 
of parts with a predetermined service life, is included in the Nord-Aviation NORD 262A 
Series Maintenance Manual.  Service Bulletins, when approved by SGAC, will carry a 
statement to that effect.  The Nord-Aviation Structural Repair Manual contains 
SGAC-approved information. 
 NOTES  
 NOTE 1. (a) A current weight and balan ce report, including a list of equipment in certificated empty weight and loading 
instructions, must be provided for each airplane at the time of the original airworthiness certification and at all 
times thereafter (except in the case of operators having an approved weight control system). 
 
  (b) The airplane must be loaded so th at the C.G. is within the specified limits at all times with the effects of fuel 
usage and movement of crew and passengers from their assigned positions being considered. 
 
  (c) The “drainable unusable” fuel is  that amount of fuel in the tanks which is unavailable to the engines under 
critical flight conditions as defined in French AIR 2051 Regulation 5.16 (CAR 4b.416).  This drainable 
unusable fuel does not include the “tank trapped fuel”.  The total unusable fuel must be included in the 
airplane empty weight or be suitably accounted for in the airplane weight and balance report.  The total 
volume of unusable fuel in U.S. Gal., with or without auxiliary tanks is: 
 
 Airplane Total
Vol. U.S. Gals.
 
Wt. lb. Arm. in.
Tank trapped 5.3 36 343.2
Drainable unusable 
 
0.0 0  0.0
Total unusable 5.3 36 343.2
 
  (d) Engine system oil is the total oil less the quantity  drainable from the tank and is the amount of oil normally 
trapped in the propellers plus the amount normally trapped in the engines after drainage.  System oil must be 
included in empty weight.  The undrainable oil in this airplane is negligible. 
 
 NOTE 2 Series 262A airplanes are eligible for operation with the SGAC-approved auxiliary fuel tank installation 
comprised of Nord Aviation Modification Nos. 354, 393, and 394. 
 
 NOTE 3 JP4 fuel, or any mixture of JP4 and JP1, may be used without readjustment of the engine fuel control unit.  When 
operating with JP4 fuel, or with any mixture of JP4 and JP1, the performance and operating limitations presented 
for operation with JP4 fuel in Appendix I of the Airplane Flight Manual must be observed. 
 
 NOTE 4 Model 262A-12 airplane may be ope rated at maximum ramp weight of 23, 490 lbs. and maximum takeoff weight 
(brake release) of 23, 370 lbs., in accordance with Airplane Flight Manual Revision No. 22, dated October 16, 
1973.  Cockpit placard must be modified in accordance with Nord Aviation N-262 Modification No. 603. 
 
 NOTE 5 Series 262A airplanes embodying in the enlarged wing tips of SGAC-approved Nord Aviation Modification No. 
640 (Service Bulletin 57-9) may be operated in accordance with the performance and operating limitations 
presented in Appendix V of the Airplane Flight Manual. 
 
 NOTE 6 Series 262A airplanes may be operated with engine  vibration indicators installed in accordance with Nord 
Aviation Modification No. 429/1 (Service Bulletin 77-1) or Modification No. 429/2 (Service Bulletin 77-2).  If 
installed, graduation of the indicator must conform with the following: 
 
   Mod. 429/1:  Range from 0 to 5, with red radial line at 1.96. 
   Mod. 429/2:  Range from 0 to 100 percen t, with red radial line at 50 percent. 
 
  Series 262A airplanes which incorporate Modifica tion No. 853 (Service Bulletin 77-11) shall be operated 
according to Service Letter 77-10 with engine vibration periodic ground checks to replace continuous inflight 
engine vibration monitoring. 
 
 NOTE 7 SGAC-approved Aerospatiale Report No. DEP/CRA- 21/74 (including SGAC (DGAC) approved revisions) titled, 
“Definition of Nord 262A Version for FAA Certification”, identifies modifications necessary for conformity with 
the approved type design of the Nord 262A series.  This report also identifies mandatory modifications applicable 
to the intitially certificated -12 version of the aircraft.  Serial number effectivity of each mandatory modification 
is specified in the appropriate service bulletin. 
 
.....END.....
```

## ADs (7, in force first)

- [AD 2005-18-20](https://openairdocs.org/ad/2005-18-20): "FASTprop" propeller de-icers · Hartzell PHC-C3YF-1RF/F8468A(B,K)-8R constant speed propeller (STC SA00718LA or 17 others). Effective Oct 14, 2005
- [AD 92-14-05](https://openairdocs.org/ad/92-14-05): Rudder Hinge Support Assembly · Aerospatiale Nord 262A Series. Effective Sep 8, 1992
- [AD 91-15-23](https://openairdocs.org/ad/91-15-23): Fuselage Skin Panel Junctions · Aerospatiale Nord 262A Series. Effective Aug 26, 1991
- [AD 89-18-09](https://openairdocs.org/ad/89-18-09): Main Landing Gear Shock Absorber · Aerospatiale Nord 262A Series. Effective Sep 25, 1989
- [AD 85-15-03](https://openairdocs.org/ad/85-15-03): Anti-icing Systems · Aerospatiale Nord 262A Series with STC SA2369SW. Effective Aug 22, 1985
- [AD 85-10-04](https://openairdocs.org/ad/85-10-04): Fire Extinguishing System · Aerospatiale Nord 262A Series. Effective Jun 24, 1985
- [AD 77-21-02](https://openairdocs.org/ad/77-21-02): Fuel Tanks · Aerospatiale Nord 262A Series. Effective Mar 2, 1978

## Registered aircraft by registry model (OpenAirDocs)

- [Aerospatiale NORD 262A](https://openairdocs.org/model/aerospatiale-nord-262a): 0 aircraft (registry code 8680698)

## STCs approved under this data sheet (18)

- [STC SA4503NM](https://openairdocs.org/stc/SA4503NM): Remove original cloth covering and install Ceconite covering. Ceconite Division of Poly-Fiber Inc.
- [STC SA01734SE](https://openairdocs.org/stc/SA01734SE): Application of Stewart Systems synthetic fabric covering system to aircraft fuselage, wings, tail surfaces, control surfaces and related parts.. Andrew D. Humphrey
- [STC ST334CH](https://openairdocs.org/stc/ST334CH): Installation of Superflite 102 fabric.. Aviation Products Systems Inc.
- [STC SA2693NM](https://openairdocs.org/stc/SA2693NM): Installation of Electronics International digital volt/amp gauges and accessories.. Electronics International Inc.
- [STC SA00680SE](https://openairdocs.org/stc/SA00680SE): Installation of Electronics International model UBG-16 or UBG-16T bar graph engine analyzer.. Electronics International
- [STC SA00823CH](https://openairdocs.org/stc/SA00823CH): Installation of various de-icer wire harnesses.. SMR Technologies
- [STC SA1070GL](https://openairdocs.org/stc/SA1070GL): Surrendered and incorporated into STC ST334CH.. Cooper Aviation Supply Company, Inc.
- [STC SA1626NM PAGE 1](https://openairdocs.org/stc/SA1626NM%20PAGE%201): Installation of Electronics Int'l Digital EGT/CHT Instruments and accessories. (201 Series). Electronics International
- [STC SA4302NM](https://openairdocs.org/stc/SA4302NM): Installation of Electronics Int'l digital automatic engine analyzer.. Electronics International
- [STC SA493NE](https://openairdocs.org/stc/SA493NE): Installation of floor proximity emergency escape path marking system.. AID International Inc
- [STC SA1351WE](https://openairdocs.org/stc/SA1351WE): Replace existing fabric on wings, fuselage, empennage, and/or control surfaces, with Ceconite101 material. (262A Series -12). Ceconite Inc
- [STC SA3596WE](https://openairdocs.org/stc/SA3596WE): Replace existing one-piece entry door with a two-piece door with integral steps in the lower half.. American Jet Industries
- [STC SA2369SW](https://openairdocs.org/stc/SA2369SW): Install P&W ACL PT6A-45A engine.. Frakes Aviation, Inc
- [STC SA2367SW](https://openairdocs.org/stc/SA2367SW): Installation of complete interior including lavatory, galley and seating.. Frakes Aviation, Inc
- [STC SA987EA](https://openairdocs.org/stc/SA987EA): Installation of forward facing modified double seat on right hand side of aircraft cabin at Station503 including incorporation of associated seat supporting structure. (262A SERIES). Ransome Airlines
- [STC SA370CE](https://openairdocs.org/stc/SA370CE): MP-5 autostereo magnetic tape player unit. (262A SERIES -12). Lake Central Airlines Inc
- [STC SA388CE](https://openairdocs.org/stc/SA388CE): U.S. manufactured aircraft control cable substituted to AN standards. (262A SERIES -12). Lake Central Airlines Inc
- [STC SA482CE](https://openairdocs.org/stc/SA482CE): Installation of cockpit voice recorder. (262A SERIES -12). Lake Central Airlines Inc

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain.
